KitchenAid KESC300BWH11 Le manuel du propriétaire

and Care Guide

TO THE INSTALLER: PLEASE LEAVE THIS

INSTRUCTION BOOK WITH THE UNIT.

TO THE CONSUMER: PLEASE READ

AND KEEP THIS BOOK FOR FUTURE

REFERENCE.

A Note to You ........................................... 2

Range Safety ............................................ 3

Parts and Features .................................. 6

Using and Caring for Your Cooktop .... 10

Using the surface cooking areas ......... 10

Cookware tips ...................................... 12 ,,

Characteristics of cookware materials. 12

Home canning information ................... 13

Caring for your cooktop ....................... 13

Cleaning your cooktop ......................... 14

Using and replacing the surface light .. 15

Using and Caring for Your Oven .......... 16

Using the electronic oven control ......... 16

Setting the clock .................................. 24

Using the timer ..................................... 24

Cooking tips ......................................... 26

Bake or Roast ...................................... 28

Broil ...................................................... 29

Adjusting the oven temperature ........... 31

Timed cooking ..................................... 33

Cleaning your oven and controls ......... 40

Oven lights ........................................... 42

Using the Self-Cleaning Cycle ............. 43

Before you start ................................... 43

Before setting the controls ................... 44

Setting the controls .............................. 44

For best cleaning results ...................... 46

How the cycle works ............................ 46

Troubleshooting .................................... 47

Requesting Assistance or Service ...... 50

Warranty ................................................. 52

In the U.S.A. for assistance or service,

call the Consumer Assistance center:

!

In Canada for assistance or service

see page 51. ::

KITCHENAID®Electric Ranges

Models: KESC300 KERC600

YKESC300 YKERC600

9753311A www,kitchenaid,com

Note to You

KitchenAid designs the best tools for the most important room in your house. To

ensure that you enjoy many years of trouble-free operation, we developed this Use

and Care Guide. It contains valuable information concerning how to operate and

maintain your new appliance properly and safely. Please read it carefully. Also,

please complete and mail the enclosed Product Registration Card.

Whenever you call our Consumer

Assistance Center at 1-800-422-1230 (in

Canada, 1-800-461-5681) or request

service for your appliance, you need to

know your complete model number and

serial number. You can find this information

on the model and serial number plate (see

diagram on page 6 for location of plate).

Please also record the purchase

information.

Model Number

Serial Number

Purchase/

Installation Date

Builder/Dealer

Name

Address

Phone

NOTE: You must provide proof of purchase

or installation date for in-warranty service.

Keep this book and the sales slip together in a safe place for future reference.

.....iiii!ili,,ii , i iiiiiiiiii!,iiiiil;i: iii ! ii{iiiiiiii!iiiiii ii ! iiiilZCiiiC iii(> i!ii!ii!i;; i!

The range will not tip during normal use. However, tipping can occur if you apply too much

force or weight to the open door without the anti-tip bracket properly secured.

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or

serious burns to children and adults.

Anti-Tip Bracket

Range Foot

Making sure the anti-tip bracket is installed:

,, Slide range forward.

,, Look for the anti-tip bracket securely attached to floor.

,, Slide range back so rear range foot is under anti-tip bracket.

Safety

Your safety and the safety of others is very important.

We have provided many important safety messages in this manual and on your

appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to hazards that can kill or hurt you and others.

All safety messages will be preceded by the safety alert symbol and the

word "DANGER" or "WARNING." These words mean:

You will be killed or seriously injured

if you don't follow instructions.

You can be killed or seriously injured

if you don't follow instructions.

All safety messages will identify the hazard, tell you how to reduce the chance of injury,

and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING" To reduce the risk of

fire, electrical shock, injury to persons,

or damage when using the range,

follow basic precautions, including

the following:

•WARNING - TO REDUCE THE

RISK OF TIPPING OF THE RANGE,

THE RANGE MUST BE SECURED

BY PROPERLY INSTALLED ANTI-

TIP DEVICES. TO CHECK IFTHE

DEVICES ARE INSTALLED PROP-

ERLY, SLIDE RANGE FORWARD,

LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO

FLOOR, AND SLIDE RANGE BACK

SO REAR RANGE FOOT ISUNDER

ANTI-TIP BRACKET.

•CAUTION - Donotstoreitems

ofinteresttochildrenincabinets

above a range oron thebackguard

ofa range- childrenclimbingon the

rangetoreach itemscouldbe

seriouslyinjured.

• Proper Installation - Be sure the range

is properly installed and grounded by a

qualified technician.

• Never Use the Range for Warming or

Heating the Room.

• Do Not Leave Children Alone - Children

should not be left alone or unattended

in area where the range is in use. They

should never be allowed to sit or stand

on any part of the range.

• Wear Proper Apparel - Loose-fitting or

hanging garments should never be worn

while using the range.

• User Servicing - Do not repair or replace

any part of the range unless specifically

recommended in the manual. All other

servicing should be referred to a qualified

technician.

• Storage in or on the Range - Flammable

materials should not be stored in an oven

or near surface units.

• Do Not Use Water on Grease Fires -

Smother fire or flame or use dry chemical

or foam-type extinguisher.

-SAVE THESE INSTRUCTIONS-

ange Safety

IMPORTANT SAFETY INSTRUCTIONS

• Use Only Dry Potholders - Moist or

damp potholders on hot surfaces

may result in burns from steam. Do

not let potholder touch hot heating

elements. Do not use a towel or

other bulky cloth.

• DO NOT TOUCH SURFACE UNITS

OR AREAS NEAR UNITS - Surface

units may be hot even though they

are dark in color. Areas near surface

units may become hot enough to

cause burns. During and after use,

do not touch, or let clothing or other

flammable materials contact surface

units or areas near units until they

have had sufficient time to cool.

Among those areas are the cooktop

and surfaces facing the cooktop.

• Use Proper Pan Size - The range is

equipped with one or more surface

units of different size. Select utensils

having flat bottoms large enough to

cover the surface unit heating

element. The use of undersized

utensils will expose a portion of the

heating element to direct contact and

may result in ignition of clothing.

Proper relationship of utensil to

burner will also improve efficiency.

• Never Leave Surface Units

Unattended at High Heat Settings -

Boilover causes smoking and

greasy spillovers that may ignite.

• Protective Liners - Do not use

aluminum foil to line oven bottoms,

except as suggested in the manual.

Improper installation of these liners

may result in a risk of electric shock,

or fire.

• Glazed Cooking Utensils - Only certain

types of glass, glass/ceramic, ceramic,

earthenware, or other glazed utensils

are suitable for range-top service without

breaking due to the sudden change in

temperature.

• Utensil Handles Should Be Turned

Inward and Not Extend Over Adjacent

Surface Units - To reduce the risk of

burns, ignition of flammable materials,

and spillage due to unintentional contact

with the utensil, the handle of a utensil

should be positioned so that it is turned

inward, and does not extend over

adjacent surface units.

• Do Not Cook on Broken Cooktop -

If cooktop should break, cleaning solu-

tions and spillovers may penetrate the

broken cooktop and create a risk of

electric shock. Contact a qualified

technician immediately.

• Clean Cooktop With Caution - If a wet

sponge or cloth is used to wipe spills on

a hot cooking area, be careful to avoid

steam burn. Some cleaners can produce

noxious fumes if applied to a hot surface.

• Use Care When Opening Door - Let hot

air or steam escape before removing or

replacing food.

• Do Not Heat Unopened Food Containers

- Build-up of pressure may cause

container to burst and result in injury.

• Keep Oven Vent Ducts Unobstructed.

• Placement of Oven Racks - Always

place oven racks in desired location

while oven is cool. If rack must be moved

while oven is hot, do not let potholder

contact hot heating element in oven.

-SAVE THESE INSTRUCTIONS-

ange Safety

IMPORTANT SAFETY INSTRUCTIONS

• DO NOT TOUCH HEATING ELE-

MENTS OR INTERIOR SURFACES

OF OVEN - Heating elements may

be hot even though they are dark in

color. Interior surfaces of an oven

become hot enough to cause burns.

During and after use, do not touch,

or let clothing or other flammable

materials contact heating elements

or interior surfaces of oven until they

have had sufficient time to cool.

Other surfaces of the appliance may

become hot enough to cause burns

- among these surfaces are oven

vent openings and surfaces near

these openings, oven doors, and

windows of oven doors.

For self-cleaning ranges -

• Do Not Clean Door Gasket - The door

gasket is essential for a good seal. Care

should be taken not to rub, damage, or

move the gasket.

• Do Not Use Oven Cleaners - No

commercial oven cleaner or oven liner

protective coating of any kind should be

used in or around any part of the oven.

• Clean Only Parts Listed in Manual.

• Before Self-Cleaning the Oven -

Remove broiler pan and other utensils.

For units with ventilating hood -

• Clean Ventilating Hoods Frequently-

Grease should not be allowed to

accumulate on hood or filter.

• When flaming foods under the hood, turn

the fan off. The fan, if operating, may

spread the flame.

-SAVE THESE INSTRUCTIONS-

rtsand Features

Oven vent

(p 8)

Surface cooking

area controls

(pp. 10, 11)

Anti-tip

bracket

(p. 2)

Model and

serial number

Surface cooking area

(pp. 10, 11)

Electronic oven control

(pp. 16-25)

Automatic

oven light

switch

(p. 42)

Broil element

(not shown)

Bake element

Left rear Left front

control knob control knob

Right front

control knob

Right rear

control knob

arts and Features

Surface light

(some freestanding

models)

(p. 15)

Oven vent

(p. 8)

Surface cooking

area controls

(pp. 10, 11)

Anti-tip

(p. 2)

Model and

serial number

plate

(p. 2)

Broiler pan

su

Surface

...............cooking area

(pp. 10, 11)

Electronic

oven control

(pp. 16-25)

Automatic

oven light

switch

l/ (p. 42)

Broil element

(not shown)

Bake element

storage

drawer

(p. 9)

i

• •

Left rear Left front

control knob control knob

Right front

control knob

REaR I

Right rear

control knob

iI arts and Features

Hot air and moisture escape from the oven

through a vent in the left rear corner of the

cooktop. Do not block the vent by using

large pans or covers. Poor baking/roasting

can result.

Oven vent

i

NOTE: Plastic utensils left over the vent

can melt.

Removing the oven door:

1. Open the door to the Broil Stop position

(open about 4" [10 cm]).

2. Lift door slightly and pull out and back until

hinges come out to the catch position.

3. Push door down and pull straight out to

remove door completely.

Replacing the oven door:

1. Holding the door by the handle, place the

top of the door under the cooktop overhang

and use your leg to apply pressure to slide

hinges into the slots as far as possible.

2. Open door to the broil position or slightly

past it.

3. Using the side of your leg, apply pressure

to the bottom of the door front. Lift the door

slightly while applying pressure to push,

until the hinges have gone in fully.

arts and Features

.....S,lii, ,O , iil,,, Ciii!!!iiiiii,ii, i!i:iii;! ,Ciiiiii, "CiliW,z ;i,i !i!iiii! , ii

You can remove the storage drawer to make it easier to clean under the range. Use care

when handling the drawer.

Removing the storage drawer: Replacing the storage drawer:

1. Empty drawer of any pots and pans

before removing drawer. Use recessed

area on top edge of drawer to pull drawer

straight out to the first stop. Lift front and

pull out to the second stop.

2. Lift back slightly and slide drawer all the

way out.

1. Fit ends of drawer slide rails into the

drawer guides on both sides of

opening.

2. Lift drawer front and press in until metal

stops on drawer slide rails clear white

stops on drawer guides. Lift drawer front

again to clear second stop and slide

drawer closed.

"ngand Caring for Your

Cooktop

Control knobs

Push in control knobs before turning them

to a setting. Set them anywhere between HI

and OFF.

Surface cooking area markers

The solid dot in the surface cooking area

_r_ marker shows which surface

cooking area is turned on by

that knob.

Power on lights

When you use a control knob to turn on

a surface cooking area, the Power

On Light by that knob will glow.

FRONT

("CHAUD"

is French

for "HOT")

Hot surface indicator lights

The Hot Surface Indicator Lights on the

cooktop surface will glow

when any of the surface

cooking areas are hot. The

Indicator Lights will continue

to glow as long as the surface

cooking areas are too hot to

touch, even after they are

turned off.

Fire Hazard

Turn off all controls when done

cooking.

Failure to do so can result in death

or fire.

Control setting guide

For best results, start cooking at the high

setting; then turn the control knob down to

continue cooking.

SETTING RECOMMENDED USE

HI or • To start food cooking.

MAX • To bring liquid to a boil.

MED-HI • To hold a rapid boil.

or 6-8 • To quickly brown or sear

meat.

MED

or 5

MED-LO

or 2-4

LO or 1

• To maintain a slow boil.

• To fry poultry or meat.

• To make pudding, sauce,

or gravy.

•To stew or steam food.

•To simmer food.

•To keep food warm. Set the

heat higher or lower within

the LO (or 1) band to keep

food at the temperature

you want.

• To maintain liquid just below

simmer.

•To melt chocolate or butter.

10

sing and Caring forYour Cooktop

Using the dual-size surface

cooking area

(on some models)

You can use the right rear surface cooking

area as either a small diameter, lower

wattage element or large diameter, full

wattage element.

Use both elements

for larger pans

Use small element

for smaller

To use both elements

(for larger pans):

* Push in and turn the control knob to the

right (clockwise) to the desired setting in

the area marked "DUAL."

NOTE: You can turn the control knob in

either direction to reach "OFF."

To use the small element

(for smaller pans):

• Push in and turn the control knob to the

left (counterclockwise) to the desired

setting in the area marked "SINGLE."

Using the ceramic glass cooktop

Dual-sizesurface

cookingarea

(on some models)

S

Hot surface

indicator

lights

Cooking on the ceramic glass cooktop is

almost the same as cooking on coil surface

units. There are, however, a few differences:

• The cooking surface area will glow red

when the element is turned on. You will

see the element cycling on and off- even

on the HI setting - to help the area stay at

the temperature setting you choose.

• Make sure the bottoms of pots and pans

are clean and dry before cooking. Food

and water particles left on the bottoms can

leave deposits on the cooktop when it is

heated.

• Wiping off the cooktop before and after

each use will help keep the surface free

from stains and give you the most even

heating. See the "Cleaning tips" section.

• Do not cook foods directly on the cooktop.

• Lift pots and pans onto and off of the

cooktop. Sliding pots and pans on the

cooktop could leave marks that are difficult

to remove or could leave permanent marks.

• Do not cook popcorn that comes in

prepackaged aluminum containers on the

cooktop. The container could leave alumi-

num marks on the cooktop that cannot be

removed completely.

• Do not use the cooktop as a cutting board.

• Do not allow anything that could melt,

such as plastic or aluminum foil, to come

in contact with the cooktop while it is hot.

• Dropping a heavy or hard object on the

cooktop could crack it. Be careful when

using heavy skillets and large pots. Do

not store jars or cans above the cooktop.

• Sugary spills and soils can cause pitting.

See the "Cleaning tips" section.

11

'ising and Caring forYour Cooktop

:; !:" i;i i i11111

• Select a pan that is about the same size

as the surface cooking area. Cookware

should not extend more than 1 inch

(2.5 cm) outside the area.

• For best results and greater energy

efficiency, use only flat-bottomed

cookware that makes good contact with

the surface cooking area. Cookware with

rounded, warped, ribbed (such as some

porcelain enamelware), or dented bottoms

could cause uneven heating and poor

cooking results.

• Cookware designed with slightly indented

bottoms or small expansion channels can

be used.

• Cookware with non-stick finish has

heating characteristics of the base material.

• Check for rough spots on the bottom of

metal or glass cookware which will scratch

the ceramic glass surface.

• Use flat bottom cookware for best heat

conduction from the surface cooking area

to the cookware. Determine flatness with

the ruler test. Place the edge of a ruler

across the bottom of the cookware. Hold it

up to the light. No light should be visible

under the ruler. Rotate the ruler in all

directions and look for any light.

• Do not leave empty cookware, or

cookware that has boiled dry, on a hot

surface cooking area. The cookware

could overheat, causing damage to the

cookware or the surface cooking area.

ooot(w(];iii!i"@

The pan material affects how fast heat transfers from the surface cooking area through the pan

material and how evenly heat spreads over the pan bottom. Choose pans that provide the

best cooking results.

Aluminum

Cast iron

Ceramic or

ceramic glass

Copper

Earthenware

Porcelain enamel-on-steel

or enamel-on-cast iron

Stainless steel

• Heats quickly and evenly.

• Use for all types of cooking.

• Medium or heavy thickness is best for most cooking.

• Used as a core or base in cookware to provide even heating.

• Heats slowly and evenly.

• Good for browning and frying.

• Maintains heat for slow cooking.

• Can be coated with porcelain enamel.

• Heats slowly and unevenly.

• Use on low to medium settings.

• Follow manufacturer's instructions.

• Heats very quickly and evenly.

• Used as a core or base in cookware to provide even heating.

• Can be used for cooktop cooking if recommended by the

manufacturer.

• Use on low settings.

• See cast iron and stainless steel.

• Heats quickly but unevenly.

• A core or base of aluminum or copper on the cookware

provides even heating.

• Can be coated with porcelain enamel.

12

sing and Caring for Your Cooktop

• Use the entire surface ("DUAL" setting) of the

right rear surface cooking area for best

results.

Use flat-bottomed canners on all types of

cooktops, especially ceramic glass.

Canners with rippled or ridged bottoms do not

allow good contact with the surface.

Center the canner over the largest surface

cooking area. Do not extend more than 1

inch (2.5 cm) outside the surface cooking

area. Large diameter canners/pans, if not

centered correctly, will trap heat and result

in damage to the cooktop. Do not place on

two surface cooking areas at the same time.

The type of material the canner is made of

determines the length of heating time. Refer

to the "Characteristics of cookware materials"

chart later in this section for more information.

• When canning for long periods of time, allow

elements and the surrounding surfaces to

cool down.

Alternate use of the surface cooking areas

between batches or prepare small batches at

a time.

Start with hot water, cover with a lid, and bring

to a boil; then reduce heat to maintain a boil

or required pressure levels in a pressure

canner.

For up-to-date information on canning,

contact your local U.S. Government

Agricultural Department Extension Office or

companies who manufacture home canning

products.

This cooktop is designed for easy care.

However, ceramic glass cooktops need

to be maintained differently than standard

electric coil elements. Foods spilled directly

on the cooktop will not burn off as on coil

elements. Because of this, the surface should

be dust-free and soil-free before heating.

Your cooktop has been prepolished at

the factory for improved protection and

cleanability. The Cooktop Polishing Creme,

a paper towel or a sponge is all you need to

clean your cooktop. For proper cleaning

methods, please review the "How to keep

your cooktop looking like new" chart. Follow

this chart after each use to ensure top

performance and to preserve that uniquely

elegant look.

NOTE: Let cooktop cool before cleaning.

13

sing and Caring forYour Cooktop

Cleaning tips

What to use:

• Cooktop Polishing Creme included with

your cooktop with a paper towel or clean,

damp sponge. This creme has been

developed especially for cleaning and

polishing your cooktop. When using, follow

instructions on container.

* Razor scraper - Use to remove cooked-

on soils from your ceramic glass cooktop.

To avoid scratches, keep the razor blade

as flat against the cooktop as possible.

Store razor blades out of reach of

children.

• Do not use steel wool, plastic cleaning

pads, abrasive powdered cleansers,

chlorine bleach, rust remover, ammonia,

or glass cleaning products with ammonia.

These products could damage the cooktop

surface.

Steps to follow:

1. Most spills can be wiped off easily

using a paper towel or clean, damp

sponge as soon as Hot Surface

Indicator Light goes off.

2. For stubborn spills, rub Cooktop

Polishing Creme into cooked-on soil

using a paper towel. If some soil remains,

leave some creme on the spot(s) and

follow Step 3.

3. Carefully scrape spots with the razor

scraper.

4. Finish by polishing entire cooktop

with Cooktop Polishing Creme and a

paper towel.

To order Cooktop Polishing Creme

(Part No. 3184477) or Razor Scraper (Part

No. 3183488), call 1-800-422-1230 (in

Canada, 1-800-461-5681 ) and follow the

instructions and telephone prompts you

hear.

NOTE: Always wipe and dry your cooktop

thoroughly after using cleanser to prevent

streaking or staining.

14

How to keep your cooktop

looking like new:

IF THERE ARE WHAT TO DO

Sugary spills

and soils (such

as jellies and

candy syrups)

To prevent pitting on

the cooktop, wipe up

with a paper towel or

clean, damp sponge

while ceramic glass

surface is still warm.

Remove as soon as

possible after spill

Occurs.

Burned-on

soils

Rub Cooktop Polishing

Creme or nonabrasive

cleanser into soil using

a paper towel. Reapply

creme to spots remain-

ing. Hold razor scraper

as flat to surface as

possible, scrape spots.

Polish entire cooktop

with creme and paper

towel. Rinse and dry.

Store razor blades out

of reach of children.

Dark streaks,

specks, and

discoloration

Metal marks

(from copper or

aluminum pans)

Use Cooktop Polishing

Creme or nonabrasive

cleanser with a damp

paper towel or sponge.

Use Cooktop Polishing

Creme or nonabrasive

cleanser with a damp

paper towel or sponge

before heating the

cooktop again. If heated

before cleaning, metal

marks may not come

off.

Tiny scratches

or abrasions

Scratches and abra-

sions do not affect

cooking. In time, they

will become less visible

as a result of cleaning.

To prevent scratches

and abrasions, use

Cooktop Polishing

Creme regularly.

sing and Caring for Your Cooktop

The surface light is in the backguard. It is

controlled by the Surface Light Command

Pad on the control panel. See "Using the

electronic oven control" section for location

information.

To turn the surface light on or off:

I SURFACE1

Replacing the surface light:

1. Unplug range or disconnect power.

2. Flip up the top of the backguard.

3. Pull up glass on front of backguard.

4. Grasp the fluorescent light tube at both

ends. Turn the tube approximately 90°

in either direction until both ends come

out of the receptacles. Replace with a

20-watt cool-white fluorescent light tube.

r

5. If the surface light still does not work,

you may need to replace the starter. The

starter is a knob-shaped part located on

the right side of the backguard, under the

light tube. To remove and replace the

starter, first remove light tube. Push

starter in and turn approximately 90°

counterclockwise. Pull starter out of

recessed area. You can find replacement

starters at stores that sell fluorescent light

tubes.

6. Replace glass and close the top panel.

7. Plug in range or reconnect power.

15

"ngand Caring for Your

Oven

This section tells you, step by step, how to operate all oven functions controlled by the

electronic control. Carefully follow these instructions, along with the cooking tips and cleaning

information, for successful use of your range.

i , ii iii! f,

Control Lock

(p. 20) Location

of Control lock

Clock set/ wilt differ on

start pad slide-in and

Display (p. 24) Number stainless steel

(see below) pads models Start pad

Oven setting Timer pads Timed and

pads (pp. 24-25) delayed

(pp. 28, 29, 43) cooking pads ing models)

(pp. 33, 34, 35) (p. 15)

Surface light pad Oven Cancel/off

(somefreestand- light pad pad

(p.42)

Display/clock

• When you first plug in the range, a tone

will sound, the display will be fully lit for a

few seconds, and the display will show the

last time set and "PF" (power failure). If,

after you set the clock (see "Setting the

clock" later in this section), the display

again shows "PF," your electricity was off

for a while. Reset the clock.

• The time display will show "Err" and

3 short tones will sound if a time or

temperature is incorrectly entered.

NOTE: You have to hold the pad down a

short time to get it to work, and you have

to allow a short time between each pad

entry. If you press a command pad

several times, the pad can stop working.

If you wait a few seconds, you can use

the pad again.

16

_ising and Caring forYour Oven

Fahrenheit/Celsius

To set your oven to cook in Celsius instead

of Fahrenheit:

1. Open the door.

2. Press CANCEL/OFF.

[CANCE l

.

Press the Number Pads 1, 2,

and 3, in that order.

4. Press BROIL.

! BRO'L!

I ,MAXl I

5. Start oven.

NOTES:

• Press BAKE to confirm that you are

using Celsius.

• Only the temperature and a flashing

degree symbol will appear in the

temperature display area when you

set your oven to cook in Celsius.

Repeat the steps above to change

from Celsius to Fahrenheit.

17

_ising and Caring forYour Oven

If you need to convert temperatures from

Celsius to Fahrenheit or vice versa, you

can refer to this chart:

Temperature replacement values

38°C=100°F

60°C=140°F

66°C=150°F

77°C=170°F

93°C=200°F

121°C=250°F

135°C=275°F

149°C=300°F

163°C=325°F

177°C=350 °F

191°C=375°F

204°C=400°F

218°C=425 °F

232°C=450°F

246°C=475°F

260°C=500°F

Disable/enable audible signals

Audible signals tell you if a function is

entered correctly or not. They also tell you

when a cycle is completed. To turn off key

entry tone, end-of-cycle tone, and reminder

tones, follow these steps:

1. Open the door.

2. Press CANCEL/OFF.

_: SS

18

_i_singand Caring forYour Oven

.

Press the Number Pads 1, 2,

and 3, in that order.

4. Press TIMER SET/START.

5. Start oven.

"Snd" and "Off" will appear on the r ._.__ i

display.

Lt22J

Repeat Steps 1-5 to turn the signals

back on,

"Snd" and "On" will appear on the display.

19

_i_sing and Caring for Your Oven

Using the control lock

The control lock prevents unwanted use

of the oven by disabling the control panel

command pads.

NOTES:

* Control lock is only available when oven

is not active or set.

* Control lock will not disable the Timer.

* Set control lock when cleaning the

control panel to prevent oven from

accidentally turning on.

To lock or deactivate the

control panel:

1. Open the door.

2. :::Press and hold CONTROL

LOCK for 5 seconds.

A single tone will sound and "START?"

will appear on the display.

3. Press START. ;::::

To unlock the control panel:

1. Open the door.

2. Press and hold CONTROL

LOCK for 5 seconds.

A single tone will sound and "CONTROL I o0o,TRoLI

LOCK _" will disappear from the display.

20

La page charge ...

KitchenAid KESC300BWH11 Le manuel du propriétaire

Ce manuel convient également à

KitchenAid KESC300BWH11 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents