Ergotron Neo-Flex Projector Ceiling Mount Manuel utilisateur

Catégorie
Supports de projecteur
Taper
Manuel utilisateur
¡ADVERTENCIA! LA INSTALACIÓN O EL MONTAJE INAPROPIADOS PUEDEN PROVOCAR
LESIONES, DAÑOS MATERIALES O INCLUSO LA MUERTE. ANTES DE COMENZAR, LEA LAS
SIGUIENTES ADVERTENCIAS.
Si las instrucciones no le resultan claras o si tiene alguna duda o pregunta, comuníquese con un
instalador calificado. Los residentes de América del Norte pueden comunicarse con el servicio de Atención
al cliente de Ergotron al 800-888-8458 o por escrito a customerservice@ergotron.com.
Si el producto o el hardware está dañado o no se le envió alguna pieza, no realice la instalación ni el
montaje. Si necesita piezas de repuesto, comuníquese con el servicio de Atención al cliente de Ergotron
al 800-888-8458 o por escrito a customerservice@ergotron.com. Los clientes internacionales deberán
comunicarse con un distribuidor local para recibir asistencia.
Información acerca de los productos que se instalan en el techo: este producto está diseñado para
instalarlo en techos definidos por vigas y viguetas de madera de 5,8 mm x 10,16 mm y más. Si no está
seguro acerca del material de su techo o si desea obtener información sobre otras superficies (vigas de
acero u hormigón), comuníquese con un instalador calificado. Para realizar una instalación segura, el
techo elegido debe ser capaz de soportar 4 veces el peso de la carga total. De lo contrario, deberá
reforzar la superficie para que cumpla con este requisito. El instalador es el responsable de comprobar
que la estructura/superficie del techo y los tacos que se utilizan en la instalación soporten la carga total de
manera segura. Para los productos que se instalan en el techo, se recomienda la instalación a cargo de
un profesional.
No utilice este producto para ninguna aplicación que Ergotron no haya especificado.
Este producto puede contener componentes móviles. Úselo con precaución.
NO EXCEDA LA CAPACIDAD DE PESO MÁXIMA PARA ESTE PRODUCTO.
WARNING! – ENGLISH
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN RESULT FROM IMPROPER
INSTALLATION OR ASSEMBLY. READ THE FOLLOWING WARNINGS BEFORE BEGINNING.
If you do not understand the instructions or have any concerns or questions, please contact a qualified installer.
North America residents can contact Ergotron customer service at 800-888-8458 or
customerservice@ergotron.com.
Do not install or assemble if the product or hardware is damaged or missing. If you require replacement parts,
contact Ergotron Customer Service at 800-888-8458 or customerservice@ergotron.com. International customers
need to contact a local distributor for assistance.
For ceiling mounted products: This product has been designed for use in a ceiling mounted configuration, defined by
wood beams and joists 2 x 4 inches and greater. If you don’t know your wall type, or for assistance with other
surfaces (steel beams or concrete), contact a qualified installer. For safe installation, the ceiling you are mounting to
must support 4 times the weight of the total load. If not, the surface must be reinforced to meet this standard. The
installer is responsible for verifying that the ceiling structure/surface and the anchors used in the installation will
safely support the total load. For Ceiling mounted products, professional installation is highly recommended.
Do not use this product for any application other than those specified by Ergotron.
This product may contain moving parts. Use with caution.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.
¡ADVERTENCIA! – ESPAÑOL
AVERTISSEMENT! – FRANÇAIS
AVERTISSEMENT! SI CE PRODUIT N’EST PAS CORRECTEMENT INSTALLÉ OU ASSEMBLÉ, IL
RISQUE DE CAUSER DES BLESSURES GRAVES, VOIRE MORTELLES, AINSI QUE DES
DOMMAGES MATÉRIELS IMPORTANTS. AVANT DE COMMENCER, LISEZ LES AVERTISSEMENTS
SUIVANTS.
Si vous ne comprenez pas les instructions, de même que si vous avez un doute ou des questions, veuillez
contacter un installateur qualifié. Les personnes qui résident en Amérique du Nord peuvent contacter le
service à la clientèle Ergotron au 800-888-8458 ou à customerservice@ergotron.com.
Si vous découvrez que le produit est endommagé ou que des fixations sont manquantes ou
endommagées, n’installez pas le produit. Si vous avez besoin de pièces de rechange, contactez le service
à la clientèle Ergotron au 800-888-8458 ou à customerservice@ergotron.com. Les clients habitant hors de
l’Amérique du Nord peuvent obtenir de l’aide auprès de leur distributeur local.
Produits s’installant au plafond: Ce produit a été conçu pour une utilisation avec une configuration de
montage au plafond, définie par des poutres et des solives de 2 po x 4 po ou plus. Si vous avez un doute
sur la composition de votre plafond ou si vous désirez des conseils concernant une autre surface (poutres
en acier ou béton), contactez un installateur qualifié. Pour que l'installation soit sécuritaire, le plafond
d'installation doit pouvoir supporter 4 fois le poids de la charge appliquée. Si tel n'est pas le cas, la surface
doit être renforcée en conséquence. L'installateur doit s'assurer que la structure/surface du plafond
d'installation et les chevilles d'ancrage utilisées peuvent supporter sans danger le poids de tous les
équipements. Il est fortement recommandé que tous les produits montés au plafond soient installés par un
professionnel.
Ce produit ne doit pas être utilisé pour un usage autre que ceux spécifiés par Ergotron.
Ce produit peut contenir des pièces mobiles. Veuillez l'utiliser avec prudence.
NE DÉPASSEZ JAMAIS LA CAPACITÉ DE CHARGE MAXIMALE DE CE PRODUIT.
WOOD STUD INSTALLATION
ﻊﻗاﻮﻤﻟا ﻂﻴﺳﻮﺘﺑ ﻢﻗو ﺔﻓﺎﺤﻟا ﻰﻠﻋ ﺔﻣﻼﻋ ﻊﺿو ﻞﺻﺎﻔﻟا نﺎﻜﻣ دﺪﺣ .AR
EN Find stud(s) and mark edge and center locations.
ES Ubique el panel y marque las ubicaciones de los bordes y el centro.
FR Repérez l'emplacement d'une poutre, puis marquez l'emplacement des bords et du centre de cette poutre.
DE Suchen Sie den Balken und markieren Sie Ränder und Mitte.
NL Zoek de drager en markeer de rand- en middenlocaties.
IT Individuare il montante e segnare la posizione dei bordi e del centro del montante stesso.
PL Znajdź belkę i zaznacz jej krawędzie oraz środek.
CZ Najděte dřevěný trám a vyznačte jeho okraje a střed.
HU Keressük meg a gerendát, és jelöljük meg a szélét és a közepét.
GK Εντοπίστε τον ορθοστάτη και σημειώστε τις άκρες του και τα κεντρικά σημεία.
PT Encontrar a viga e marcar os locais extremos e centrais.
DA Find underligger og markér kant og midt.
FI Etsi pystypuu ja merkitse reunat ja keskikohta.
SV Hitta stiftet och markera kant och mittenposition.
RO Găsiţi panoul şimarcaţilocaţiile de pe margine şidin centru.
BL Открийте преграда и обозначете ръба и централната й позиция.
ET Otsige üles sõrestikupost ning märkige selle servad ja keskkoht.
LV Atrodiet statni un atzīmējiet malas un centra atrašanāsvietas
LT Surasti varžtą ir pažymėti kraštines bei centrinę padėtj.
SL Najdite steber ter označite robove in sredino.
SK Nájdite drevený trám a vyznačte jeho okraje a stred.
RU Найдите стойку и отметьте ее центр и края.
TR Direği bulun, kenarını ve ortasını işaretleyin.
NO Finn stenderen og marker kantene og midten.
CN
查找支柱和标记边缘及中心位置。
JP スタッドを見つけて、端と中央に印を付けます。
STUD
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25

Ergotron Neo-Flex Projector Ceiling Mount Manuel utilisateur

Catégorie
Supports de projecteur
Taper
Manuel utilisateur