LITE ON WCBN3606L Manuel utilisateur

Marque
LITE ON
Modèle
WCBN3606L
Taper
Manuel utilisateur
Page 1/7 2021/4/23
USER MANUAL
802.11 b/g/n, 1T1R 2.4GHz + BLE Wireless IOT Module
Model name:WCBN3606L
Brand: LITEON
Version 1.2
* This document contains confidential proprietary information and is property of LTC. The contents of
this document should not be disclosed to unauthorized persons without the written consent of LTC
Reision
Date
Author
Change List
Version 1.0
2021 / 3 / 8
Kaysa Lee
Preliminary
Version 1.1
2021 / 4 / 12
Kaysa Lee
Update Antenna Clearance Area to be
compatible with dual band module.
Version 1.2
2021 / 4 / 21
Kaysa Lee
Update Antenna Clearance Area
Page 2/10 2021/4/23
CONTENT
PRODUCT FEATURES .................................................................................................................... 3
PRODUCT SPECIFICATIONS ........................................................................................................ 3
MAIN CHIPSET ....................................................................................................................................... 3
FUNCTIONAL SPECIFICATIONS ............................................................................................................... 3
BLOCK DIAGRAM ........................................................................................................................... 4
PRODUCT PICTURE ........................................................................................................................ 4
PIN DEFINIITON .............................................................................................................................. 5
MECHANICAL .................................................................................................................................. 6
RECOMMENDED FOOTPRINT HORIZONTAL MOUNT ........................................................ 6
RECOMMENDED FOOTPRINT VERTICAL MOUNT ............................................................... 7
ENVIRONMENTA ............................................................................................................................. 7
OPERATING ............................................................................................................................................ 7
STORAGE ................................................................................................................................................7
WARNING STATEMENTS .............................................................................................8
Page 3/10 2021/4/23
PRODUCT FEATURES
◼ WiFi / BLE4.2 operate at ISM frequency bands
◼ Compact Form Factor: 16 x 24 x 3.2 mm (pcb) ±0.1mm
◼ Standards support: 802.11b, 802.11g, 802.11n, 802.11d, 802.11e, 802.11i
◼ Enterprise level security complying with WPA/WPA2 certification
◼ One transmitter and one receiver 802.11n WLAN transceiver supports up to 150 Mbps
downstream and 150 Mbps upstream PHY rates
◼ Pre-configured for the Afero Secure IoT Platform
◼ HF/RoHS compliance
PRODUCT SPECIFICATIONS
MAIN CHIPSET
RTL8720CM-VT2
FUNCTIONAL SPECIFICATIONS
WiFi Function
Standard
IEEE802.11b; IEEE 802.11g; IEEE 802.11n
Bus Interface
UART
Data Rate
802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 7
Media Access Control
CSMA/CA with ACK
Modulation Techniques
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64QAM, 16QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16QAM, 64QAM
Network Architecture
Ad-hoc mode (Peer-to-Peer)
Infrastructure mode
Operation Channel
2.4GHz
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
Frequency Range
802.11bg
2.412 ~ 2.462 GHz
Transmit Output Power – 1x1
(Tolerance: +-1.5dBm)
802.11b:
17dBm
802.11g:
15dBm
Page 4/10 2021/4/23
802.11n:
14dBm
Receive Sensitivity
802.11b: (IEEE Standard <-76dBm)
typical: -89dBM(1M)
802.11g: (IEEE Standard <-65dBm)
Typical: -76dBm(54M)
802.11n:
20MHz (IEEE Standard <-64dBm)
Typical: -73dBm
Security
WPA, WPA2, WPS, WEP 64/128, IEEE 802.11x, IEEE
802.11i
Operating Voltage
3.3V ±10% I/O supply voltage
Power Consumption
(Average)
TX:
MCS7-HT20 : 198mA
OFDM 54M : 207mA
CCK 11M : 249mA
RX:
MCS7-HT20:67mA
CCK-11M:61mA
Antenna Type
Printed Antenna
BLOCK DIAGRAM
PRODUCT PICTURE
Page 5/10 2021/4/23
PIN DEFINIITON
TOP
Pin
No.
Pin Name
Module Pin Name/Function
2
GND
Ground
4
GPIOA_15
FACTORY_UART_RX
6
GPIOA_16
FACTORY_UART_TX
8
CHIP_EN
RESET_N
10
GPIOA_19
FACTORY_MODE_N
12
x
No Connected
14
GPIOA_3
TX1/SDA
16
GPIOA_2
RX1/SCL
Bottom
Pin
No.
Pin Name
Module Pin Name/Function
1
GPIOA_14
PWM1/GPIO0
3
GPIOA_13
PWM2/GPIO1
5
GPIOA_4
PWM3/GPIO2
7
GPIOA_17
PWM4/GPIO3
9
GPIOA_18
PWM5/GPIO4
11
GPIOA_20
PWM6/GPIO5
13
GND
Ground
15
3V3
Power
17
GPIOA_19
FACTORY_MODE_N
19
CHIP_EN
RESET_N
21
GPIOA_16
FACTORY_UART_TX
23
GPIOA_15
FACTORY_UART_RX
25
X
No Connected
27
X
No Connected
29
GPIOA_23(ext.PL)
GPIO7
31
GND
Ground
18
GPIOA_2
RX1/SCL
20
GPIOA_3
TX1/SDA
22
GPIOA_1
GPIO8 (no pulldown)
24
GND
Ground
26
x
No Connected
28
x
No Connected
30
GPIOA_0
GPIO10
32
GND
Ground
Page 6/10 2021/4/23
MECHANICAL
*mm
RECOMMENDED FOOTPRINT HORIZONTAL MOUNT
*mm
Page 7/10 2021/4/23
RECOMMENDED FOOTPRINT VERTICAL MOUNT
*mm
ENVIRONMENTA
Operating
Operating Temperature: -40 to 105 C
Relevant Humidity: 5-90% (non-condensing)
Storage
Temperature: -50 to 150 C
Relevant Humidity: 5-95% (non-condensing)
WARNING STATEMENTS
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
˗Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible. This device and its antenna(s) must not be co-located with any
other transmitters except in accordance with FCC multi transmitter product procedures. Referring
to the multi transmitter policy, multiple transmitter(s) and module(s) can be operated
simultaneously without C2PC.
IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20 cm between the radiator & your body.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is
responsible for the compliance to all the rules that apply to the product into which this certified
RF module is integrated. Additional testing and certification may be necessary when multiple
modules are used.
Page 8/10 2021/4/23
20 cm minimum distance has to be able to be maintained between the antenna and the users for
the host this module is integrated into. Under such configuration, the FCC radiation exposure
limits set forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the user’s manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has to
be informed that the FCC radio frequency exposure guidelines for an uncontrolled environment
can be satisfied. The end user has to also be informed that any changes or modifications not
expressly approved by the manufacturer could void the user's authority to operate this
equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19
statement is required to be available in the user’s manual: This device complies with Part 15 of
FCC rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains FCC ID: PPQ-
WCBN3606L". If the size of the end product is larger than 8x10cm, then the following FCC part
15.19 statement has to also be available on the label: This device complies with Part 15 of FCC
rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference
that may cause undesired operation.
OEM Integrator Checklist
The party below will implement the LITE-ON Module in host systems in accordance with the
instructions specified in this document and the documents referenced herein.
1.The OEM integrator will ensure the Module is integrated in a host systems using only the
approved antenna model(s) described in this document.
2.The OEM integrator will ensure the antenna placement inside the host system willmaintain the
required spacing to end user for RF Exposure compliance, as specified in this document. 3.If other
radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact its
test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet
FCC collocation rules.
4.The OEM integrator will ensure end user documentation will contain the specified regulatory
Page 9/10 2021/4/23
wording and ensure the host system and the Module itself are labeled as specified in this
document.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document. LITE-ON requests that the O
EM integrator acknowledge its receipt of this document and the above instructions. You may con
tact LITE-ON with any questions concerning this document or the responsibilities of the OEM int
egrator
IC statement:
This device contains licence‐exempt transmitter(s)/receiver(s) that comply with Innovation, Scie
nce and Economic Development Canada’s licence‐exempt RSS(s). Operation is subject to the foll
owing two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CN
R d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1.L’appareil ne doit pas produire de brouillage;
2.L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susce
ptible d’en compromettre le fonctionnement.
IC Radiation Exposure Statement
This equipment complies with IC RSS‐102 radiation exposure limit set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm b
etween the radiator and your body.
Déclaration d’exposition à la radiation : Cet équipement respecte les limites d’exposition aux ra
yonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé
et mis en marche à une distance minimale de 20 cm qui sépare l’élément rayonnant de votre co
rps.
L’émetteur ne doit ni être utilisé avec une autre antenne ou un autre émetteur ni se trouver à l
eur proximité.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed
such that 25 cm may be maintained between the antenna and users. The final end product mus
t be labeled in a visible area with the following: “Contains IC: 4491A‐WCBN3606L”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenn
e peut être installée de telle sorte qu'une distance de 25cm peut être maintenue entre l'antenn
e et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription s
uivante: "Contient des IC: 4491A‐WCBN3606L".
Page 10/10 2021/4/23
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

LITE ON WCBN3606L Manuel utilisateur

Marque
LITE ON
Modèle
WCBN3606L
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents