MrSteam AromaFlo System Installation & Operation Manual

Marque: MrSteam

Modèle: AromaFlo System

Taper: Installation & Operation Manual

.steam® l Feel Good Inc.

AromaFlo

Installation, Operation & Maintenance Manual

Fragrance Metering Pump System for

Commercial Steam Rooms

Part Number CU-AROMAFLOA

__________________________________

IMPORTANT: Leave this material with the operator.

__________________________________

This installation, operation and maintenance manual is for general reference.

The installation, operation and maintenance manual supplied with the product must be used for

installation, operation and maintenance purposes. Failure to use the installation, operation and

maintenance manual supplied may result in a property damage or personal injury.

WARNING

TABLE OF CONTENTS

Installer’s Section:

Box Contents ........................................3

Important Safety Information ...............4

System Overview ..................................5

General System Dimensions ................6

General Installation .........................7-11

Operation ...........................................12

Troubleshooting ................................. 13

Replacement Parts .............................14

Installing the Caddy ......................15-16

Operator’s Section

Fragrances .........................................17

Important Safety Information .............18

Locating the Caddy ............................19

Pump Operation............................19-20

Warranty .............................................20

BEFORE INSTALLING

Carefully inspect the AromaFlo pump and packaging for ship-

ping damage. In the event of shipping damage, please contact

the carrier for claim information. Our customer service depart-

ment can assist you with product replacement.

Read these instructions before installation or service. Although

the AromaFlo pump has been fully qualiﬁed for shipment by

MrSteam, the following must be reviewed for proper, safe and

enjoyable steam bathing:

1. Verify that the model and accessories speciﬁcations are cor-

rect for the application.

2. The physical size of the unit, clearance for plumbing servic-

ing, its distance from the steam room and fragrance location

must all be considered before ﬁnal installation.

3. Consider any controls and accessories before initiating

installation. Read the Installation and Operation Manual of

all controls and accessories available at www.mrsteam.com

technical downloads.

IMPORTANT NOTES:

This document contains important safety, operation and main-

tenance information. After installation leave this document

with the operator. Do not discard this document.

The following general information should be used in conjunc-

tion with consultations with an architect, designer and contrac-

tor in determining factors necessary in providing a suitable and

safe steam room. MrSteam AromaFlo pumps are intended to

be operated with MrSteam CU commercial steam bath gen-

erators and are to be installed strictly in accordance with the

speciﬁc instructions contained in this manual and as supplied

in the manuals provided with the controls or accessories.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

IMPORTANT NOTE:

This “peel and stick” warning

label shall be posted in a

conspicuous location next to

the steam room door.

PUR100193 Rev 5.22

This room is equipped with an automatic

aromatic dispensing system. Leave Room

immediately if you have any adverse or

allergic reaction, including difficulty

breathing, or eye, nasal or throat irritation.

Mr. Steam

43-20 34th Street, Long Island City, New York 11101

800 767 8326

PN PUR100381 8/22

IMPORTANT NOTE:

As you follow these instructions, you will notice warning and caution

symbols. This blocked information is important for the safe and efficient installation and use of

the pump, fragrance and caddy. These are types of potential hazards that may occur during

installation and operation:

states a hazard may cause serious injury or death if precautions are not followed.

signals a situation where minor injury or product damage may occur if you do not

follow instructions.

IMPORTANT NOTE: This highlights information that is especially relevant to a problem-free

installation.

All information in these instructions is based on the latest product information available at the

time of publication.

MrSteam reserves the right to make changes at any time without notice.

WARNING

CAUTION

Pump Caddy

Additional Items included but not shown:

U ÓÝÊÕÌ}Ê-VÀiÜÃÊ>`ÊVÀÃÊvÀÊ>``ÞÊ>`Ê*Õ«

U ÕÃi

Box Contents

Check Valve Injector with

Injector Tubing

Installation &

Operation Manual

All Drawings for Illustrative Purposes Only

Pressure Tube

Assembly Suction Tube

Assembly

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

This room is equipped with an automatic

aromatic dispensing system. Leave Room

immediately if you have any adverse or

allergic reaction, including difficulty

breathing, or eye, nasal or throat irritation.

Mr. Steam

43-20 34th Street, Long Island City, New York 11101

800 767 8326

PN PUR100381 8/22

Warning Sign

(Includes mounting hardware)

UÊÛ`ÊVÌ>VÌÊÜÌÊiÞiÃ°Ê>ÞÊV>ÕÃiÊ`ÊiÞiÊÀÀÌ>Ì°Ê

Ingestion may cause irritation, nausea, vomiting.

UÊ6>«ÀÃÊ>ÞÊV>ÕÃiÊ`ÀÜÃiÃÃ]Ê>iÀ}VÊÀi>VÌÃ]Ê

difficulty breathing or skin irritation. If condition

persists get medical attention.

UÊÀ-Ìi>ÊvÀ>}À>ViÃÊCU-EUCALYPTUS, CU-LAVENDER)

are only for use with the MrSteam AromaFlo

dispensing pump (part number CU-AROMAFLO).

Never use MrSteam fragrances in any other pump,

spray or dispensing device. The use of MrSteam fra-

grances in any other device may introduce excessive

concentration of fragrances into the steam room and

may cause personal injury.

UÊ/iÊÕÃiÊvÊ>ÞÊvÀ>}À>ViÃÊÌiÀÊÌ>ÊÀ-Ìi>ÊvÀ>-

grances with a MrSteam AromaFlo dispensing pump

may introduce excessive concentration of fragrances

into the steam room, resulting in personal injury.

WARNING

FIRST AID

IMPORTANT NOTES:

UÊ/iÊ->viÌÞÊ>Ì>Ê-iiÌÊ«ÀÛ`iÃÊV«ÀiiÃÛiÊ

information about MrSteam fragrances. Contact

1-800-767-8326 or go online at www.mrsteam.com

for a copy of the Safety Data Sheet.

UÊ-Ìi>ÊÀ>ÊvÀ>}À>ViÃÊ>ÀiÊÞÊvÀÊÕÃiÊÊV-

mercial installations. Do Not use MrSteam fragranc-

es in residential installations.

IN CASE OF EYE CONTACT: Rinse the eyes

immediately with plenty of water, also

under the eyelids, for at least 15 minutes. If eye

irritation persists: Get medical attention.

IN CASE OF SKIN CONTACT: Remove/Take off

immediately all contaminated clothing.

UÊii«Ê>Ü>ÞÊvÀÊi>Ì]ÊÃ«>ÀÃ]ÊiiVÌÀV>ÊÕÌiÌÃ]Ê

open flames such as candles and hot surfaces.

UÊ ÊÃ}°Ê

UÊii«Ê"ÕÌÊvÊÌiÊ,i>VÊvÊ`Ài°Ê

UÊ1ÃiÊÞÊÃ«>À}ÊÌÃ°Ê/>iÊ«ÀiV>ÕÌ>ÀÞÊ

measures against static discharge.

UÊÌ>ÃÊ`i>ÌÕÀi`ÊiÌÞÊ>V°

UÊÊV>ÃiÊvÊvÀi\Ê1ÃiÊ"Ó]Ê`ÀÞÊViV>]Ê>VÊ

foam, and water spray for extinction.

UÊÜ>ÞÃÊÃÌÀiÊÌiÊÀ-Ìi>ÊvÀ>}À>ViÃÊÊ>ÊÃiVÕÀiÊ

V>Ì°Êii«ÊVÌ>iÀÊÌ}ÌÞÊVÃi`Ê>`Ê

store in a cool, dry and well-ventilated place.

UÊii«ÊÕÌÊvÊÀi>VÊvÊV`Ài°

UÊ/iÊÀ>ÊÃÞÃÌiÊ>ÃÊLiiÊv>VÌÀÞÊÃiÌÊÌÊ

deliver a suitable amount of fragrance into a typi-

cal sized commercial steam room. Start with the

AromaFlo dispensing pump volume at a very low

setting. Gradually increase the volume setting until

a comfortable fragrance level is reached. Do not

exceed the “

Recommended Setting

” indicated on

the pump volume.

UÊ iÛiÀÊÕÃiÊ>ÊÀ>Ê«Õ«ÊÊ>Ê,iÃ`iÌ>ÊÀÊ

Day Spa installation. Doing so may result in exces-

sive amounts of fragrance and personal injury.

UÊÊ ÌÊ>ÌiÀÊÀÊ`vÞÊ>ÞÊÀ-Ìi>Ê«À`ÕVÌ°Ê

Doing so may result in a personal injury.

UÊ Never locate the caddy near or on the steam boil-

er. Doing so may result in fire, property damage or

personal injury

FLAMMABLE LIQUID AND VAPOR

Rinse skin with soap and water or shower. If skin

irritation persists, get medical attention.

IF SWALLOWED: Do not induce vomiting.

Rinse mouth thoroughly with water. If conscious,

give large amounts of water. If symptoms per-

sist, call a physician.

UÊ ÌÊvÀÊÕÃiÊÊ>VÀÞVÊÀÊvLiÀ}>ÃÃÊÀÃ°Ê

Check with the room manufacturer to deter-

mine compatibility of these fragrances with

room construction materials.

UÊÊ ÌÊ>ÌiÀÊÀÊ`vÞÊ>ÞÊÀ-Ìi>Ê«À`ÕVÌ°Ê

Doing so will void the warranty.

UÊÀ-Ìi>ÊÀ>ÊvÀ>}À>ViÃÊÕÃÌÊLiÊ`Ã-

posed of as hazardous waste.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

Typical CU Commercial

Steambath Generator

Check

Valve

Steam Head

Steamline

Pressure Tube

Fragrance Container Cap

with Hole for Tubing

Fragrance Container

Fragrance

Caddy

Pump

Suction Tube

Pump Line

Cord

Steam Solenoid

with Outlet

AromaFlo System Overview

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

5 -10 ft. optimal

51/2 ft. max

6 ft. max

2 ft. max

Steam

Generator

Steam

Pipe T

Check Valve

Suction

Hose

Pump Line Cord 120V

(to grounded outlet attached

to steam solenoid valve)

Fragrance

Caddy

Steam Solenoid

Valve Steam Head

(inside steam room)

Pressure Hose

Pump

General System Dimensions

PUMP SPECS

Dimensions: 7.5”W x 4.5”H x 4.5”D

Weight: 5 pounds

Motor voltage 120VAC, 50/60 Hz

Current Draw 0.5 Amps

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

WARNING SIGN

The warning sign shall be posted in a conspicuous location

next to the steam room door.

PUMP LOCATION AND INSTALLATION

1. ii«ÊÌiÊÀ>Ê-ÞÃÌiÊ>Ü>ÞÊvÀÊi>Ì]ÊÃ«>ÀÃ]ÊiiVÌÀV>

outlets, open flames such as candles and hot surfaces.

2. Locate the Fragrance and Caddy to monitor the

consumption of fragrance and for easy replacement.

3. The AromaFlo System should not be installed in areas acces-

sible to children. A locked room is strongly recommended (i.e.

utility room)

4. The AromaFlo System is designed and intended for indoor

use only and is to be located indoors in a dry clean location

and not subject to moisture, condensation or similar high

humidity environments.

5. Do not install the AromaFlo System outdoors.

6. Do not install the AromaFlo System in a location where water

could freeze.

7. Do not install the AromaFlo System near corrosive materials

and chemicals. Installation in areas having high concentrations

of chlorine (such as pool equipment room) should be avoided.

8. Attach the AromaFlo Pump onto a secure vertical surface.

9. Use only non-sparking tools. Take precautionary

measures against static discharge.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

This room is equipped with an automatic

aromatic dispensing system. Leave Room

immediately if you have any adverse or

allergic reaction, including difficulty

breathing, or eye, nasal or throat irritation.

Mr. Steam

43-20 34th Street, Long Island City, New York 11101

800 767 8326

PN PUR100381 8/22

Installing the 90 degree T and Check Valve

1. For optimal results locate a brass 90 degree T (not provided)

in the steam supply line within 5-10 feet of the steam head. If

using copper tubing for steam lines, install a female 1/2 NPT

or 1/4 NPT reducing Tee in the steam line facing downward.

2. T must face downward as shown.

IMPORTANT NOTE:

Follow the installation instructions for the

steam pipeline in the MrSteam CU Series Steambath Generators

Installation and Operation Manual. Visit www.mrsteam.com to

download this document.

3. Install Check Valve into 90˚

/adaptor.

The Check Valve prevents excessive amounts of

fragrance from entering the steam line and steam room. Never

install the AromaFlo System without the Check Valve. Failure to

install the Check Valve may result in excessive fragrance delivery

into the steam room and cause dizziness and/or personal injury.

PRESSURE TUBE ASSEMBLY

For your convenience the pressure tube assembly is provided pre-

assembled. If additional tubing is needed please contact MrSteam

Technical service at 1-800-767-8326 or 1-800-727-8326.

Installation of Pressure Tube to the Pump

1. Insert the pressure tube through the hole of the pump tightening

nut and collar and firmly push the tube onto the tube holder.

2. Screw the pump tightening nut onto the pump and tighten the

nut by HAND only.

Installation of Pressure Tube to the 90˚ T

Insert the pressure tube through the Check Valve tightening nut

and collar and firmly push the pressure tube onto the tube holder.

2. Screw the Check Valve tightening nut onto the Check Valve.

IMPORTANT NOTE: To prevent connection from leaking, insert

tubing holder completely into tubing until it reaches the bottom.

Lubricate the ID of the tubing as required with soap to facilitate

insertion.

IMPORTANT NOTE:

To prevent damage do not use tools to

tighten the nut.

WARNING

Steam Pipe (not supplied)

Adapter

(not supplied)

Check Valve

Tube Holder

Collar

Check Valve

Tightening Nut

Pressure Tube

Pump

Tightening

Nut

Collar

Tube Holder

Pump

90˚ Tee

(not supplied)

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

SUCTION TUBE ASSEMBLY

For your convenience the suction tube assembly is provided

preassembled. If additional tubing is needed please

contact MrSteam Technical service at 1-800-767-8326 or

1-800-727-8326.

Installation of Suction Tube to the Pump

1. Insert the suction tube through the pump tightening nut

and collar and firmly push the tube onto the tube holder.

2. Screw the suction tube tightening nut to the

suction side of the pump.

IMPORTANT NOTE: HAND-TIGHTEN ONLY.

Installation of Suction Tube into the

Fragrance Container

1. Locate the “container cap” with the hole included

with the bottle of fragrance.

2. Insert the suction tube through the hole in the

container cap.

3. Remove the foot valve cap and insert the suction tube

through the cap. Push the suction tube onto the foot

valve. Tighten the cap onto the foot valve.

4. Unscrew the cap from the fragrance container

and discard.

5. Screw the cap onto the fragrance container.

6. Make sure the Foot Valve rests on the bottom of

the fragrance container.

IMPORTANT NOTE: To prevent connection from leaking,

insert tubing holder completely into tubing until it reaches the

bottom. Lubricate the ID of the tubing as required with soap

to facilitate insertion.

IMPORTANT NOTE: To prevent damage do not use tools to

tighten the nut.

Suction

Tube

Assembly

Tube Holder

Collar

Pump Tightening Nut

Suction Tube

Fragrance

Container

Cap with Hole

Foot Valve

Tightening Nut

Foot Valve

Fragrance

Container

Caddy

Pump

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

Priming the Pump

1. Insure MrSteam fragrance container is full.

2. Insert a short piece of soft injector tube onto the tip of

the injector (see Fig. 1).

3. Insert the open end of the injector tube onto the

pressure valve (see Fig. 1).

4. Open the priming valve by turning the knob counter

clockwise one full revolution.

5. Draw liquid from the injector slowly and evenly.

Continue until the injector is full of liquid.

6. If you have drawn up the injector completely and no

liquid is in the injector, remove the injector tube from

the pressure valve.

7. Drain injector. Repeat steps until the injector is filled.

8. Save the fragrance injector as it may be needed when

new fragrances are used.

9. Close the priming valve completely by turning the

knob clockwise.

Failing to close the valve will result in

fragrance leaking from the priming port.

IMPORTANT NOTE: If an extended pressure tube is

special ordered then contact MrSteam Technical Service

(see page 20) for instructions for filling the pressure tube

with fragrance.

Priming Valve Knob

Soft Injector Tubing

Injector

CAUTION

Figure 1

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

Electrical Connection of

Metering Pump

This AromaFlo system is

factory wired. If the power cord of the

AromaFlo pump is damaged it must be

replaced by the MrSteam service depart-

ment or similarly qualified personnel in

order to avoid an electric shock hazard.

All electrical connections to be made by a

licensed, qualified electrician. Disconnect

all power to the steam generator before

making power connections.

Electrical Box Assembly

To avoid possible electric

shock, the AromaFlo pump must be suitably

grounded according to National Electric

and local Codes. Disconnect all power

supplies before proceeding. Such wiring

should be done by a licensed electrician.

NOTE: Refer to the wiring diagram

above for all wiring connections

CAUTION

CU Steam Generator Digital 1 Control

CU AROMAFLO

PROBE

Steam Solenoid Valve

Digitl One Control

MrSteam Commercial

Steam Solenoid.

CAUTION

!Receptacle Faceplate

(supplied with AromaFlo)

Single Receptacle

(supplied with AromaFlo)

(2x4) NEMA Electrical Box

(supplied by others)

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

VOLUME

Recommended

Setting

OPERATION

Powering Up the Pump

IMPORTANT NOTE: This step only needs to be performed during installation.

1. The pump needs to be turned on before it can be used

2. Ensure power is being supplied to the pump.

3. Press and hold the power button for 3 seconds.

The LED will turn solid green.

PUMP LED LIGHT: KEY:

Flashing Green LED Pump is OFF. Press and hold the power button for 3 seconds to turn the pump on.

Solid Green LED

Pump is on and has been activated from the in-shower control.

The LED will turn off each time the pump injects fragrance into the steam line.

No Light

Pump is OFF

The AromaFlo pump will inject a metered amount of fragrance into the steam line only when the

steam solenoid valve is open.

Adjusting the Amount of Fragrance Delivery

The AromaFlo system has been factory set to deliver a suitable amount of aromatic

fragrance into a typical sized steam room. Do not exceed the maximum setting.

Please contact the MrSteam Technical Service Department before changing this setting.

Contact the MrSteam Technical Service Dept. at (800) 76-STEAM (East coast)

or (800) 72-STEAM (West Coast) for assistance or additional information.

Increasing the settings may introduce excessive concentration of

fragrance into the steam room, resulting in a health hazard.

Fragrance

Setting Knob

Power Button

LED Light

AROMAFLO

L2210-2 Rev C

VOLUME

ON/OFF

Do not install or operate this product without read-

ing and following the supplied Installation and Operation Manual.

Additional copies of the manual can be found at www.mrsteam.com

or by contacting MrSteam at 1-800-767-8326

For Commercial Installations Only

CAUTION

Recommended

Setting

WARNING

Fully Assembled

The electrical outlet shown

is for AromaFlo Pump connection only. Make

no other connections to this outlet. Other

connections may result in circuit overload

CAUTION

!Electric Box with

Steam Solenoid

3 Conductor,

Grounding-type

Line Cord

AromaFlo

Metering Pump

MrSteam Commercial

Steam Solenoid.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

Pump fragrance delivery too much

or too little

The AromaFlo system has been factory

set to deliver a suitable amount of aromatic fragrance

into a typical sized steam room. Please contact the

MrSteam Technical Service Department before

changing this setting. See page 12 for instructions

on adjusting the amount of fragrance delivery.

Contact the MrSteam Technical Service Dept. at (800)

76-STEAM (East coast) or (800) 72-STEAM (West Coast)

for assistance or additional information.

ELECTRICAL SHOCK HAZARD. MrSteam

AromaFlo pumps are connected to 120V line voltage

and contain live electrical components. All installation

and service to be performed by qualiﬁed and licensed

electricians and plumbers only. Installation or service

by unqualiﬁed persons or failure to use MrSteam parts

may result in property damage or in a hazardous

condition.

TROUBLESHOOTING

Ê /"Ê6"Ê/,Ê-"]Ê-" -

NECT POWER TO PUMP BEFORE SERVICING

Pump does not prime

1. Check if voltage is available.

2. Check liquid level in fragrance container.

Replenish liquid, if necessary.

3. Check for air bubbles in the suction tube or

the pump head. To eliminate air bubbles see:

Priming Pump.

4. Check valves for contamination. Clean valves

if necessary.

5. Check foot valve in container for contamination.

Rinse foot valve under clean water.

Pump does not inject fragrance into

steam room

1. Check if voltage is available.

2. Check liquid level in fragrance container. Replenish

fragrance if necessary.

3. Check for air bubbles in the suction tube or the

pump head. To eliminate air bubbles see:

Priming Pump.

4. Check valves for contamination. Clean valves if

necessary.

5. Check foot valve in container for contamination.

Rinse foot valve under clean water.

6. Check the pressure tube for kinking or jamming.

Straighten or replace.

7. Check if fragrance is freely flowing through the

Check Valve when the metering pump is energized.

Apply compressed air through the Check Valve.

Attach the compressed air at the point of connection

of the pressure tube.

Ensure the pump has been powered up. See page 12.

WARNING

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

Check Valve (5 pcs.)

104240

Tube (per foot)

104255

Tube Connector

(3 pcs)

104250

Pump Head

104239

Tube Connector

(3 pcs)

104250

Tube (per foot)

104255

Foot Valve (2 pcs.)

104241

O-Ring Kit

(3 pcs.) 104275

Syringe (103983)

Priming Tube (6”) 104322

Caddy (104319)

REPLACEMENT PARTS

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

Installing the Caddy

Box Contents: Tools required:

UÊ-Ì>iÃÃÊÃÌiiÊV>``ÞÊ UÊÀ`iÃÃÊ`ÀÊÜÌÊa Phillips bit

UÊÕÌ}ÊÃVÀiÜÃÊÓ®ÊÊ UÊiÛiÊÊ

UÊÃÌÀÕVÌÃÊÊ * Use only non-sparking tools.

Take precautionary measures

against static discharge

Locating the Caddy:

1. Place in a location that allows visual monitoring of the fragrances level.

2. Place in a location that allows for easy replacement of the fragrance

container.

3. The caddy should not be installed in areas accessible to children.

A locked room is strongly recommended (ie: utility room).

4. The maximm distance from the pump to the bottom of the caddy

is 6 feet (Diagram 1).

5. The caddy is designed and intended for indoor use only.

Do not install outdoors.

6. Do not install in an unheated location where water could freeze.

Locate in an area where the ambient temperature does not exceed 88˚ F.

8. Never locate the caddy near or on the steam boiler. Doing so may result

in fire, property damage or personal injury

6 feet

max

Pump

Caddy

Fragrance

Top Screw

Hole

Bottom

Screw Keyhole

Bottom

Screw

2x4

Wall Stud

Diagram 1

Diagram 2

All diagrams for illustrative purposes only

Diagram 3

Drawing details removed for clarity

WARNING

Using a fragrance container that is not secured

in the caddy, or using a caddy that is not mounted may

result in spillage, excessively strong vapors or a fire hazard.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

All diagrams for illustrative purposes only

Diagram 5

Diagram 4

Mounting the Caddy on a Wall:

1. Use a level to make sure the caddy is level.

2. Use the two mounting screws provided to secure the caddy

to a wall stud (Diagram 2).

3. The fragrance and caddy are heavy. Failure to mount the caddy to a wall

stud in a secure manner may result in spillage, excessively strong vapors

or a fire hazard.

4. Install the lower screw first into a wall stud. Leave about 1/8” of the screw

sticking out above the surface. Lower the caddy onto the screw so the

caddy bottom keyhole rests securely on the screw.

5. Mounting screws have been provided. However, as construction materi-

als may vary, use other hardware (screws, anchors, etc. ) as required for

secure mounting. Test the caddy for secure mounting.

Insert the fragrance container with the label facing outward so it is visible

through the caddy window (Diagram 4). The label contains important infor-

mation.

7. Connect the fragrance container to the pump according to instructions on

page 9 (Diagram 5).

8. Always keep the container in the caddy while it is connected to the dis-

pensing pump.

Mounting the Caddy on a Floor:

1. Use the two mounting screws provided to secure the caddy using the

two holes at the bottom of the caddy (Diagram 3).

2. Mounting screws have been provided. However, as construction materi-

als may vary, use other hardware (screws, anchors, etc. ) as required for

secure mounting. Test the caddy for secure mounting.

3. Insert the fragrance container with the label facing outward in a manner

it is visible through the caddy window (Diagram 4).

The label contains

important information.

4. Connect the fragrance container according to instructions on page 9

(Diagram 5).

5. Always keep the container in the caddy while it is connected to the dis-

pensing pump.

WARNING

Using a fragrance container that is not secured

in the caddy, or using a caddy that is not mounted may

result in spillage, excessively strong vapors or a fire hazard.

INSTALLER SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

OPERATOR SECTION

IMPORTANT NOTE:

As you follow these instructions, you will notice warning and caution symbols.

This blocked information is important for the safe and efficient installation and use of the fragrance and

caddy. These are types of potential hazards that may occur during installation and operation:

states a hazard may cause serious injury or death if precautions are not followed.

signals a situation where minor injury or product damage may occur if you do not follow instructions.

IMPORTANT NOTE:

This highlights information that is especially relevant to a problem-free installation.

WARNING

CAUTION

MrSteam Fragrance is Available in Two Fragrances:

FRAGRANCE PART NO. CONTAINER VOL.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Eucalyptus CU-EUCALYPTUS 1 Gallon

A deeply refreshing aroma with cleansing effects,

eucalyptus may help open air passageways.

Lavender CU-LAVENDER 1 Gallon

A sweet, lightly floral scent, lavender may help

soothe anxiety with its calming and restorative properties.

The Safety Data Sheet provides comprehensive information about

MrSteam AromaFlo fragrances. Contact 1-800-767-8326 or go online at

www.mrsteam.com for a copy of the Safety Data Sheet.

THE AROMAFLO SYSTEM

FRAGRANCE DISPENSING PUMP

The AromaFlo’s state-of-the-art pump introduces

fragrance

into the steam pipe and into a commercial steam room.

MrSteam AromaFlo Fragrances

AromaFlo Operation and Installation Instructions

UÊÛ`ÊVÌ>VÌÊÜÌÊiÞiÃ°Ê>ÞÊV>ÕÃiÊ`ÊiÞiÊÀÀÌ>Ì°Ê

Ingestion may cause irritation, nausea, vomiting.

UÊ6>«ÀÃÊ>ÞÊV>ÕÃiÊ`ÀÜÃiÃÃ]Ê>iÀ}VÊÀi>VÌÃ]Ê

difficulty breathing or skin irritation. If condition

persists get medical attention.

UÊÀ-Ìi>ÊvÀ>}À>ViÃÊCU-EUCALYPTUS, CU-LAVENDER)

are only for use with the MrSteam AromaFlo

dispensing pump (part number CU-AROMAFLO).

Never use MrSteam fragrances in any other pump,

spray or dispensing device. The use of MrSteam fra-

grances in any other device may introduce excessive

concentration of fragrances into the steam room and

may cause personal injury.

UÊ/iÊÕÃiÊvÊ>ÞÊvÀ>}À>ViÃÊÌiÀÊÌ>ÊÀ-Ìi>ÊvÀ>-

grances with a MrSteam AromaFlo dispensing pump

may introduce excessive concentration of fragrances

into the steam room, resulting in personal injury.

WARNING

FIRST AID

IMPORTANT NOTES:

UÊ/iÊ->viÌÞÊ>Ì>Ê-iiÌÊ«ÀÛ`iÃÊV«ÀiiÃÛiÊ

information about MrSteam fragrances. Contact

1-800-767-8326 or go online at www.mrsteam.com

for a copy of the Safety Data Sheet.

UÊ-Ìi>ÊÀ>ÊvÀ>}À>ViÃÊ>ÀiÊÞÊvÀÊÕÃiÊÊV-

mercial installations. Do Not use MrSteam fragranc-

es in residential installations.

IN CASE OF EYE CONTACT: Rinse the eyes

immediately with plenty of water, also

under the eyelids, for at least 15 minutes. If eye

irritation persists: Get medical attention.

IN CASE OF SKIN CONTACT: Remove/Take off

immediately all contaminated clothing.

UÊii«Ê>Ü>ÞÊvÀÊi>Ì]ÊÃ«>ÀÃ]ÊiiVÌÀV>ÊÕÌiÌÃ]Ê

open flames such as candles and hot surfaces.

UÊ ÊÃ}°Ê

UÊii«Ê"ÕÌÊvÊÌiÊ,i>VÊvÊ`Ài°Ê

UÊ1ÃiÊÞÊÃ«>À}ÊÌÃ°Ê/>iÊ«ÀiV>ÕÌ>ÀÞÊ

measures against static discharge.

UÊÌ>ÃÊ`i>ÌÕÀi`ÊiÌÞÊ>V°

UÊÊV>ÃiÊvÊvÀi\Ê1ÃiÊ"Ó]Ê`ÀÞÊViV>]Ê>VÊ

foam, and water spray for extinction.

UÊÜ>ÞÃÊÃÌÀiÊÌiÊÀ-Ìi>ÊvÀ>}À>ViÃÊÊ>ÊÃiVÕÀiÊ

V>Ì°Êii«ÊVÌ>iÀÊÌ}ÌÞÊVÃi`Ê>`Ê

store in a cool, dry and well-ventilated place.

UÊii«ÊÕÌÊvÊÀi>VÊvÊV`Ài°

UÊ/iÊÀ>ÊÃÞÃÌiÊ>ÃÊLiiÊv>VÌÀÞÊÃiÌÊÌÊ

deliver a suitable amount of fragrance into a typi-

cal sized commercial steam room. Start with the

AromaFlo dispensing pump volume at a very low

setting. Gradually increase the volume setting until

a comfortable fragrance level is reached. Do not

exceed the “

Recommended Setting

” indicated on

the pump volume.

UÊ iÛiÀÊÕÃiÊ>ÊÀ>Ê«Õ«ÊÊ>Ê,iÃ`iÌ>ÊÀÊ

Day Spa installation. Doing so may result in exces-

sive amounts of fragrance and personal injury.

UÊÊ ÌÊ>ÌiÀÊÀÊ`vÞÊ>ÞÊÀ-Ìi>Ê«À`ÕVÌ°Ê

Doing so may result in a personal injury.

UÊ Never locate the caddy near or on the steam boil-

er. Doing so may result in fire, property damage or

personal injury

FLAMMABLE LIQUID AND VAPOR

Rinse skin with soap and water or shower. If skin

irritation persists, get medical attention.

IF SWALLOWED: Do not induce vomiting.

Rinse mouth thoroughly with water. If conscious,

give large amounts of water. If symptoms per-

sist, call a physician.

UÊ ÌÊvÀÊÕÃiÊÊ>VÀÞVÊÀÊvLiÀ}>ÃÃÊÀÃ°Ê

Check with the room manufacturer to deter-

mine compatibility of these fragrances with

room construction materials.

UÊÊ ÌÊ>ÌiÀÊÀÊ`vÞÊ>ÞÊÀ-Ìi>Ê«À`ÕVÌ°Ê

Doing so will void the warranty.

UÊÀ-Ìi>ÊÀ>ÊvÀ>}À>ViÃÊÕÃÌÊLiÊ`Ã-

posed of as hazardous waste.

OPERATOR SECTION

AromaFlo Operation and Installation Instructions

Locating the Caddy/Fragrance:

1. Place in a location that allows visual monitoring of the fragrances level.

2. Place in a location that allows for easy replacement of the fragrance container.

3. The caddy should not be installed in areas accessible to children. A locked room is strongly

recommended (ie: utility room).

4. The maximm distance from the pump to the bottom of the caddy is 6 feet (Diagram 1).

5. The caddy is designed and intended for indoor use only. Do not install outdoors.

6. Do not install in an unheated location where water could freeze.

Locate in an area where the ambient temperature does not exceed 88˚ F.

8. Never locate the caddy near or on the steam boiler. Doing so may result in fire, property

damage or personal injury

Diagram 1

WARNING

Using a fragrance container that is not secured

in the caddy, or using a caddy that is not mounted may

result in spillage, excessively strong vapors or a fire hazard.

VOLUME

Recommended

Setting

Fragrance

Setting Knob

Power Button

LED Light

AROMAFLO

L2210-2 Rev C

VOLUME

ON/OFF

Do not install or operate this product without read-

ing and following the supplied Installation and Operation Manual.

Additional copies of the manual can be found at www.mrsteam.com

or by contacting MrSteam at 1-800-767-8326

For Commercial Installations Only

CAUTION

Recommended

Setting

OPERATION

Powering Up the Pump

IMPORTANT NOTE: This step only needs to be performed during installation.

1. The pump needs to be turned on before it can be used

2. Ensure power is being supplied to the pump.

3. Press and hold the power button for 3 seconds.

The LED will turn solid green.

PUMP LED LIGHT: KEY:

Flashing Green LED Pump is OFF. Press and hold the power button for 3 seconds to turn the pump on.

Solid Green LED

Pump is on and has been activated from the in-shower control.

The LED will turn off each time the pump injects fragrance into the steam line.

No Light

Pump is OFF

The AromaFlo pump will inject a metered amount of fragrance into the steam line only when the steam solenoid valve is open.

Adjusting the Amount of Fragrance Delivery

The AromaFlo system has been factory set to deliver a suitable amount of aromatic

fragrance into a typical sized steam room. Do not exceed the maximum setting.

Please contact the MrSteam Technical Service Department before changing this setting.

Contact the MrSteam Technical Service Dept. at (800) 76-STEAM (East coast)

or (800) 72-STEAM (West Coast) for assistance or additional information.

Increasing the settings may introduce excessive concentration of

fragrance into the steam room, resulting in a health hazard.

WARNING

All diagrams for illustrative purposes only

OPERATOR SECTION

AromaFlo Operation and Installation Instructions

All Drawings for Illustrative Purposes Only

.steam®

Feel Good Inc.

www.mrsteam.com

Products, information and specifications are subject to change without notice.

Please call Technical Support at 1.800.76.STEAM (East Coast) or 1.800.72.STEAM (West Coast) for more information.

The model and serial number is printed on the data plate on the front of the steam bath generator.

Have this information available when contacting Technical Service.

mr.steam®

hello@mrsteam.com

I www.mrsteam.com

43-20 34th Street, Long Island City, NY 11101 TEL: 1 800 76 STEAM I 9410 S. La Cienega Blvd. Inglewood CA 90301 TEL: 1 800 72 STEAM

2020

Digital 1, Express Steam, Feel Good Inc., From Bathroom to Spa, HomeWizard, iButler, iGenie, iSpa Package, iSteam, iTempo, iTempo/Plus, Linear Steamhead, Making Wellness a Way of Life,

Music Therapy, My Steam, SmartSizing, Spa Package, Steam Genie, Steam on Demand, Steam in a Box, Steam@Home, SteamStart, SteamTherapy, Tala, Tala Bath & Body, Tempo, The Intelligent