Matrox Millennium G550 Manuel utilisateur

Millennium

G

550

User Guide

10776-301-0100

2001.07.30

ENGLISH

2 Matrox Graphics Card – User Guide

Hardware installation

This section describes how to install your Matrox card. If your Matrox graphics card is already

installed in your computer, skip to “Connection setup”, page 4. For information specific to your

computer, like how to remove its cover, see your system manual.

1

Switch to the standard VGA display driver

If you’re running Windows 98/Me/2000 on your computer, this step isn’t necessary.

If you’re using another operating system (for example, Windows NT 4.0), see its

documentation for how to switch to VGA mode.

2

Open your computer and

remove your existing graphics

card

*

Turn off your computer and all peripherals

such as your monitor or printer. Open the

computer and remove your existing

graphics card (if any). (If graphics hardware

is built into the motherboard of your

computer, this graphics hardware should

automatically disable itself after your

Matrox card is installed.)

WARN I N G:

To avoid personal injury, turn off your computer, unplug it, and then wait for

it to cool before you touch any of its internal parts. Also, static electricity can severely damage

electronic parts. Before touching any electronic parts, drain static electricity from your body

(for example, by touching the metal frame of your computer). When handling a card,

carefully hold it by its edges and avoid touching its circuitry.

* With multi-display mode, you may be able to use your existing graphics card. For Windows 98/Me/2000, see Windows

98/Me/2000 online help under “Multiple Display Support”. For Windows NT 4.0, only Matrox graphics card models supported

by the Matrox display driver can be used.

Matrox Graphics Card – User Guide 3

3

Choose an expansion slot

Most computers have different types of

expansion slots. Choose an AGP or PCI slot,

depending on the type of Matrox card you

have. Your system manual should identify

the location of each type of expansion slot in

your computer.

4

Insert your Matrox card

a

Remove the cover for the slot you intend

to use.

b

Save the screw for the mounting

bracket. Position your Matrox card over

the expansion slot you’ve chosen.

c

Push the card in firmly and evenly until

it’s fully seated in the slot.

d

Replace the screw to secure the bracket

of your Matrox card to the computer

frame.

Your Matrox card is now installed.

Before restarting your computer

, connect your monitor or

monitors (see “Connection setup”, page 4).

After connecting

, restart your computer and install your

Matrox software (see “Software installation”, page 8).

WARN I N G:

Inserting your Matrox card

into the wrong type of slot could damage

your card, your computer, or both.

If you have an AGP card,

don’t

insert the

plastic tab (see picture) into the slot.

AGP slot

PCI slot

ISA slot

(Back of computer)

AGP cardPCI card

Plastic

tab

4 Matrox Graphics Card – User Guide

Connection setup

For the purpose of determining your connection setup, there are 3 types of graphics cards:

!

DVI/HD-15 –

a DVI (white) and an HD-15

(blue) connector

!

DVI only –

only a DVI (white) connector

!

LFH-60 –

only an LFH-60 (black) connector

WA R NI N G:

Don’t change monitor connections while your computer is turned on. While

your computer is turned on, it may be using monitor settings that are specific to the current

monitor connections.

Some

devices may be permanently damaged if incorrect settings are

used.

Note:

To c o n n e c t a

digital

monitor (a

monitor that uses digital input, usually a flat

panel monitor) to your Matrox product,

your monitor must have a DVI connector.

P&D and MDR-20 connectors aren’t

supported.

If you have an

analog

monitor (a monitor

that uses analog input) with a DVI

connector and you want to connect it to an

HD-15 connector, you’ll need a separate

adapter. If this adapter isn’t included with

your monitor, contact your monitor vendor.

Some monitors with DVI connectors support both digital and analog input. If you’re using

one of these monitors with your Matrox product, make sure it’s configured to use the correct

type of input. For more information, see your monitor documentation.

DVI HD-15

DVI

LFH-60

HD-15 connector (analog)

P&D connector

(digital)

MDR-20 connector

(digital)

DVI connector

(digital)

DVI connector

(analog/digital)

Matrox Graphics Card – User Guide 5

If you have a DVI/HD-15 graphics card

If your Matrox card has a DVI and an HD-15

connector, you can connect up to two

monitors directly to your card.

You can use the HD-15 connector on your

card to connect an analog monitor.

You can use the DVI connector on your card

to connect a digital monitor.

You can also use the DVI connector to

connect an analog monitor. You should do

this only when there’s already a device

connected to the HD-15 connector. You can

connect an analog monitor with a DVI

connector directly. You can also connect an

analog monitor with an HD-15 connector

using a DVI-to-HD15 adapter. If you need

this adapter and it’s not included with your

Matrox product, contact your computer

vendor.

If you have a DVI-only graphics card

If your Matrox card only has a DVI

connector, you can connect one monitor

directly to your card or up to two monitors

using a dual-monitor cable.

You can connect a monitor with a DVI

connector directly to your card.

You can also connect an analog monitor

with an HD-15 connector using an analog

dual-monitor cable (included with certain

Matrox products) or using a DVI-to-HD15

adapter. If you need this adapter and it’s not

included with your Matrox product, contact

your computer vendor.

HD-15

connector

DVI

connector

DVI connector

HD-15 connector

DVI-to-HD15 adapter

HD-15 connector

DVI

connector

DVI connector

DVI

connector

DVI-to-HD15 adapter

HD-15 connector

DVI

connector

6 Matrox Graphics Card – User Guide

To use a dual-monitor cable to connect one

or two analog monitors, connect it to your

card and to your analog monitor cables. If

you’re connecting only one monitor, use the

main connector (labeled

1

or

1/3

) of your

dual-monitor cable.

If you have an LFH-60 graphics card

If your Matrox card only has an LFH-60

connector, you can connect up to two

monitors to your card using a dual-monitor

cable. The type of monitor you can connect

to your card depends on the type of dual-

monitor cable you have.

If you’re using an

analog

dual-monitor cable

(a cable with HD-15 connectors), connect it

to your card and to your analog monitor

cables. If you’re connecting only one

monitor, use the main connector (labeled

1

or

1/3

) of your dual-monitor cable.

If you’re using a

digital

dual-monitor cable

*

(a cable with DVI connectors), connect it to

your card and directly to your digital

monitors. The dual-monitor cable replaces

the cables that came with your digital

monitors. If you’re connecting only one

monitor, use the main connector (labeled

1

or

1/3

) of your dual-monitor cable.

* The digital dual-monitor cable is only available for cards with an LFH-60 connector.

HD-15

connector (1)

HD-15

connector (2)

Dual-monitor

cable

LFH-60 connector

HD-15

connector (1)

HD-15

connector (2)

A

na

l

og

d

ua

l

-

monitor cable

Digital monitor

DVI connector

Digital dual-

monitor cable

Matrox Graphics Card – User Guide 7

Determining your main and secondary display

Your Matrox hardware has a main display and a secondary

display – the main display is more capable than the

secondary display. Which connector the software uses for

your main display depends on your connection setup.

!

If your Matrox card has a DVI and an HD-15 connector,

there are 3 conditions that

determine which connector is used for your main display:

"

If a digital monitor is connected, the DVI connector is used for your main display.

"

If the TV output adapter is connected, the DVI connector is used for your main

display.

"

If no digital monitor or no TV output adapter is connected, the HD-15 connector is

used for your main display.

!

If your Matrox card only has a DVI connector and you’re not using a dual-monitor

cable,

this connector is used for your main display.

!

If you’re connecting your monitors using a dual-monitor cable,

the connectors are

numbered. The main display uses the connector labeled

1

(or

1/3

) and the secondary

display uses the connector labeled

2

(or

2/4

).

Note:

To connect to the digital dual-monitor cable, your monitor must have a DVI

connector. P&D and MDR-20 connectors (see page 4), and analog monitors aren’t supported

with this cable.

Note:

Whenever you change your connection setup, make sure you’re using the correct

connectors and that all connectors are properly fastened.

Whenever you restart your computer, make sure your monitors are already turned on.

Otherwise, the software may not be able to properly detect your monitors.

Note:

If a TV output adapter is included with your Matrox

product, you can use this adapter to connect a TV or video

recorder to your Matrox product. The adapter connects to the

HD-15 connector on your card or to the connector labeled

2

(or

2/4

) on an analog dual-monitor cable. For more information, see

“TV output” in the online version of this guide.

VIDEO OUT

S-VIDEO OUT

TV output adapter

8 Matrox Graphics Card – User Guide

Software installation

This section describes how to install Matrox software for

Wi ndows

*

98/Me/2000 or NT 4.0

. (For other operating systems,

see the

Readme

file in the root folder of the Matrox installation

CD-ROM.)

Windows 2000 or NT 4.0 –

You may need administrator rights

to install certain software. For more information, see Windows

documentation.

1

Restart your computer

If you’re using Windows 98/Me/2000

, it detects new

hardware when you restart. If Matrox display drivers haven’t been previously installed,

Windows reports finding a PCI adapter (even if you have an AGP card). Windows prompts

you to install a display driver. Follow the on-screen instructions. (The Matrox Windows

98/Me display driver is in the

Win9x

folder of your Matrox installation CD-ROM. The

Matrox Windows 2000 display driver is in the

Win2k

folder.)

2

Install required software

After your computer has restarted, insert (or reinsert)

the Matrox installation CD-ROM in your CD-ROM drive – the setup program automatically

starts.

†

This setup program works with Windows 98/Me/2000

and NT 4.0, and detects which

operating system you’re using. If the required display software isn’t already installed, the

setup program automatically prompts you to install this software. Follow the on-screen

instructions.

After the required display software is installed, you’re prompted to restart your computer for

changes to take effect. Leave your Matrox CD-ROM in your CD-ROM drive.

3

Install optional software

After your computer restarts, the setup program shows

you a list of additional items you can install. For each item you want to install, select a list

item, click

Install

, then follow the on-screen instructions.

4

Set up your display software

See “Display setup”, page 9.

* Unless otherwise indicated, references to

Windows 2000

also apply to

Windows XP.

2

k2k

NT

2

k

NT

9

898

9

8

2k2k

M

eMe

Me

† If Windows doesn’t automatically start the setup program, you can start it manually from the root folder of the CD-ROM.

Note:

Included with certain Matrox products is software for HeadCasting. With

HeadCasting

, you can use real-time 3D animated heads in programs that support this feature.

For more information, see “Matrox HeadCasting” in the online version of this guide.

Matrox Graphics Card – User Guide 9

Display setup

Your Matrox display driver includes Matrox PowerDesk software. This software helps you get the

most out of your Matrox graphics card. This section has important information on how to configure

your display settings using Matrox PowerDesk software.

Accessing PowerDesk property sheets

Many display controls are on Matrox PowerDesk property sheets. You can identify

Matrox PowerDesk property sheets by the icon appearing on the tab. To access

these property sheets:

!

Windows 98/Me/2000 –

Right-click your Windows desktop background, then click

Properties

#

Settings

#

Advanced

. If you’re using a multi-display desktop, select a

display before clicking

Advanced

.

!

Windows NT 4.0 –

Click

#

Settings

#

Control Panel

#

Matrox Display

Properties

(double-click).

Also, to quickly access PowerDesk features, click the Matrox QuickDesk icon ( ) on your Windows

taskbar.

Monitor setup

Before changing your display resolution, color palette, or other Matrox PowerDesk settings, make

sure correct software monitor settings are selected. If you have a Plug-and-Play (DDC) monitor, the

correct settings are usually automatically selected. The following explains how to make sure your

monitor settings are okay.

9

898

9

8

2k2k

M

eMe

Me

NTNT

Note:

Multi-display mode is supported under Windows 98/Me/2000 and NT 4.0. For more

information on multi-display mode, see Windows 98/Me/2000 online help under “Multiple

Display support” and see “DualHead Multi-Display setup”, page 10.

WA R NI N G:

If incorrect software monitor settings are applied,

some

monitors can be

permanently damaged. For more information, see your monitor manual.

10 Matrox Graphics Card – User Guide

Windows 98/Me/2000 –

If you have a Plug-and-Play (DDC) monitor, Windows should

automatically use the correct settings for your monitor. To make sure the correct monitor is

selected in Windows:

1

Right-click your Windows desktop background, then click

Properties

#

Settings

.

2

Depending on what version of Windows you have, click

Change Display Type

, or

Advanced Properties

#

Monitor

, or

Advanced

#

Monitor

. If you’re using a multi-display

desktop, select a display before clicking

Advanced

.

3

If the monitor name listed doesn’t match your monitor, click the

Change

button to select

a new monitor name. Follow the on-screen instructions.

For more information on Windows monitor settings, see Windows documentation.

If you want to customize your Windows monitor settings:

1

Access the PowerDesk

Monitor Settings

property sheet (see “Accessing PowerDesk

property sheets”, page 9).

2

Depending on what you want to do, click one of the buttons in the

Monitor settings

selection method

box, then follow the on-screen instructions.

Windows NT 4.0

–

1

Access the Matrox PowerDesk

Monitor

property sheet (see “Accessing PowerDesk

property sheets”, page 9).

2

If you have a Plug-and-Play monitor:

Make sure the

Plug-and-Play (DDC) monitor

button is

selected. If so, the Matrox display driver

automatically

uses the correct settings for your

monitor. If not, click this button, then click

Apply

.

If you don’t have a Plug-and-Play monitor:

See if the

Default monitor (60 Hz)

button is selected. If

so, use the Matrox monitor selection method. For more information on Matrox monitor

selection, see Matrox PowerDesk online documentation.

DualHead Multi-Display setup

With your Matrox graphics card, you can enable a second display (for example, a computer monitor

or a TV) as part of your Windows desktop. This is the Matrox

DualHead Multi-Display

feature. To use

this feature:

Windows 98/Me/2000 –

When you first restart your computer, you’ll be prompted to enable

the DualHead Multi-Display feature. Follow the on-screen instructions. For more

information, see the online help.

9

898

9

8

2k2k

M

eMe

Me

NTNT

9

898

9

8

2k2k

M

eMe

Me

Matrox Graphics Card – User Guide 11

Windows NT 4.0 –

1

Access the Matrox PowerDesk

DualHead

property sheet (see “Accessing PowerDesk

property sheets”, page 9).

2

Select the

DualHead Multi-Display

option button.

3

Click

OK

#

Yes

to restart your computer and for changes to take effect.

4

Access the Matrox PowerDesk

Settings

property sheet (see “Accessing PowerDesk

property sheets”, page 9).

5

Click

Multi-Display Desktop

( ).

6

Move the

Desktop area

slider to adjust your multi-display desktop, then click

OK

to

accept your changes.

Other DualHead features

If your Matrox graphics card has a second monitor connector you can also use these features:

Windows 98/Me/2000 or NT 4.0 –

!

DualHead Clone

– View a copy of your main display on your secondary display. Each

display can use different monitor settings (refresh rates).

!

DualHead Zoom

– Use your secondary display to view a zoomed-in portion of your main

display.

Windows 98/Me/2000 –

!

DualHead DVDMax

– Play digital video in a window on your main display and, at the

same time, view that video full-screen on your secondary display.

Note:

In multi-display mode under Windows NT 4.0, the same display resolution and color

palette is used for each display.

Note:

You can also use your main and secondary displays for two distinct views in games that

use the DualHead Multi-Display feature. For more information on games that use this

feature, see the Matrox Web site (www.matrox.com/mga

).

NTNT

12 Matrox Graphics Card – User Guide

More PowerDesk information

For more information on Matrox PowerDesk:

Windows 98/Me/2000 or NT 4.0 –

!

For context-sensitive help where available, click the “ ” icon in the title bar, then click

the item you want help on. Right-click a help topic for a pop-up menu that lets you print

or copy it. (Some help topics are only available through context-sensitive help.)

Windows 98/Me/2000 –

!

Access the PowerDesk

Information

property sheet (see “Accessing PowerDesk property

sheets”, page 9), then click

Help

or

View Readme File

.

Windows NT 4.0 –

!

Access the Matrox PowerDesk

Information

property sheet (see “Accessing PowerDesk

property sheets”, page 9).

!

Click the Matrox QuickDesk icon ( ) on your Windows taskbar, then click

Help

#

PowerDesk Guide

or

Help

#

View Readme File

.

9

898

9

8

2k2k

M

eMe

Me

NTNT

Matrox Graphics Card – User Guide 13

Troubleshooting

Basic procedures

This section explains basic procedures that are referred to by some troubleshooting items in this

guide.

Restarting in safe mode

What follows is information on how to restart your computer in

safe mode

(or

VGA mode

).

If your primary display is

usable

:

Windows 98/Me/2000 or NT 4.0 –

1

Restart your computer:

"

Windows 98/Me/2000 –

Click

#

Shut Down

#

Restart

#

OK

.

"

Windows NT 4.0 –

Click

#

Shut Down

#

Restart your computer

#

Yes

.

2

Windows 98/Me/2000 –

Before

Windows starts, press [F8] for the Windows startup

menu to appear. (If [F8] doesn’t work, instead try pressing and holding [Ctrl] before

Windows starts.)

3

Select “safe mode” or “VGA mode”, then press [Enter].

If your primary display is

unusable

:

Windows 98/Me –

1

Press [Ctrl]+[Alt]+[Del] twice to restart your computer.

2

Before

Windows starts, press [F8] for the Windows startup menu to appear. (If [F8]

doesn’t work, instead try pressing and holding [Ctrl] before Windows starts.)

3

Select “safe mode”, then press [Enter].

Windows 2000 –

1

Press [Ctrl]+[Alt]+[Del]

#

[Tab]

#

[Tab]

#

[Enter]

#

[

$

] (down arrow)

#

[Enter] to

restart your computer.

2

Before

Windows starts, press [F8] for the Windows startup menu to appear.

3

Select “safe mode”, then press [Enter].

9

898

9

8

M

eMe

Me

2k2k

14 Matrox Graphics Card – User Guide

Windows NT 4.0 –

1

Press [Ctrl]+[Alt]+[Del]

#

[Tab]

#

[Tab]

#

[Enter]

#

[

$

] (down arrow)

#

[Enter] to

restart your computer.

2

From the startup menu, choose Windows “VGA mode”.

Main troubleshooting

This section addresses possible problems that could prevent you from using your computer.

Problem Computer doesn’t display information or boot after Matrox card is installed

1

Cause

Your Matrox card may not be properly installed.

1

Solution

Make sure your Matrox card is properly installed. Specifically, make sure the card is firmly

inserted in its expansion slot and that all connections to it are firmly in place. For more

information, see “Hardware installation”, page 2.

2

Cause

There may be an unsupported graphics adapter in your computer. (For Matrox

multi-display

mode

in Windows NT, all graphics cards in your computer must be Matrox cards supported

by the display driver.)

1

Solution

If an unsupported graphics card is plugged into an expansion slot, remove it.

2

Solution

If a graphics adapter is built into your computer motherboard, your system may not have

automatically disabled it when you inserted your Matrox card. Check your system manual for

instructions on how to disable your computer’s built-in graphics adapter.

3

Cause

Your computer BIOS (Basic Input/Output System) may not be up to date. For more

information on your computer BIOS, see your system manual.

1

Solution

Reinstall your previous graphics card and, if possible, update your computer BIOS. This can

usually be done with software from the manufacturer of your computer. Contact your system

vendor or manufacturer to get a BIOS update for your computer.

To get the correct BIOS update, you may need to know the serial number your computer

displays when it restarts. (This number is usually in the lower-left corner of the display.)

4

Cause

The BIOS of your Matrox graphics card may need to be updated or restored.

NTNT

Matrox Graphics Card – User Guide 15

1

Solution

For advanced users –

If you have another VGA-compatible graphics card (ISA or PCI), you

can try resetting the BIOS of your Matrox graphics card.

1

Turn off your computer and insert the other graphics card into an expansion slot. For

more information on expansion slots, see “Choose an expansion slot”, page 3.

2

Plug your monitor into the other graphics card and restart your computer.

3

Make sure

Matrox System Utilities

are installed on your computer. (These can be

installed from your Matrox CD-ROM.)

4

Windows 98/Me/2000 or NT 4.0 –

Click

#

Run

, type

c:\matrox\util\pbioswin

,

then click

OK

. Follow the on-screen instructions.

DOS –

Restart your computer in DOS mode, then type:

cd c:\matrox\util

[Enter]

upbiosdos

[Enter]

5

Turn off your computer, remove the other graphics card, then plug your monitor into

your Matrox graphics card.

6

Restart your computer.

Problem Wrong color balance, screen image off-center, or no picture at all

1

Cause

Your monitor video controls may be improperly set.

1

Solution

Adjust your monitor controls (brightness, contrast, and so on). For more information, see

your monitor manual.

2

Cause

Your monitor may not be properly connected.

1

Solution

Make sure you’re using the correct connectors (see “Connection setup”, page 4) and that all

connectors are properly fastened.

Note:

Make sure your computer uses the other graphics card to control your primary

display. The graphics card that controls your primary display is the one that first displays

information when you restart your computer. (A DualHead-supporting graphics card

may display this startup information on both of its displays at the same time.)

Your computer BIOS (Basic Input/Output System) and the slot type (ISA, PCI, or AGP

– see “Choose an expansion slot”, page 3) of each graphics card help determine which

graphics card controls your primary display.

To control which graphics card is used for your primary display, you may be able to

change the configuration of your computer BIOS. For information on how to change

your computer BIOS settings, see your system manual.

16 Matrox Graphics Card – User Guide

2

Solution

Make sure the monitor power cable is firmly in place.

3

Solution

Make sure the connection to the back of the monitor is firmly in place.

If your monitor uses BNC input, make

sure the Red (

R

), Green (

G

), Blue (

B

),

Horizontal Sync (

HSYNC

– white or gray

wire), and Vertical Sync (

VSYNC

– black

wire) connections are firmly in place and

plugged into the correct input.

3

Cause

If your monitor uses BNC input, one or more connection settings may be incorrect.

1

Solution

Set each of your monitor RGB input and sync switches (if available) to 75 ohms, with the

sync set to “external”. These controls are usually switches on the back of your monitor.

4

Cause

If display problems occur after the startup screen of your operating system, your software

monitor settings may be incorrect.

1

Solution

Make sure correct software monitor setings are selected.

If your primary display is still usable, see “Monitor setup”, page 9. Otherwise, see the next

troubleshooting item.

Problem After the startup screen, or after display settings are changed,

the screen image is garbled or unusable

(blank screen, rolling or overlapping screen images)

1

Cause

The Matrox display driver may be trying to use settings your monitor doesn’t support. This

can happen if a monitor was never selected in the software and the display resolution was

changed to one your monitor doesn’t support, or if the monitor connected to your computer

was changed without changing it in the software.

1

Solution

Windows 98/Me/2000 –

1

If your primary display is unusable, restart your computer in safe mode (see “Restarting

in safe mode”, page 13).

2

Right-click the Windows desktop background, then click

Properties

#

Settings

.

3

Move the

Screen area

slider down to its lowest setting, then click

OK

.

Bayonet Nut Connect (BNC)

WARN I N G:

If incorrect software monitor settings are applied,

some

monitors can be

permanently damaged. For more information, see your monitor manual.

9

898

9

8

2k2k

M

eMe

Me

Matrox Graphics Card – User Guide 17

4

Restart your computer normally.

5

Make sure the correct monitor is selected in Windows (see “Monitor setup”, page 9).

6

Make sure you’re not using inappropriate monitor setting customizations: Access the

PowerDesk

Monitor Settings

property sheet (see “Accessing PowerDesk property sheets”,

page 9), then click

Delete all customizations

.

7

Restore your original display settings (see steps 2 and 3).

Windows NT 4.0 –

1

If your primary display is unusable, restart your computer in VGA mode (see “Restarting

in safe mode”, page 13).

2

Right-click the Windows desktop background, then click

Properties

#

Settings

.

Windows may prompt you that the display settings are incorrect for the current mode;

click

OK

to continue.

3

Move the

Desktop area

slider down to its lowest setting, then click

OK

.

4

Restart your computer normally.

5

Select a monitor with the Matrox PowerDesk

Monitor

property sheet, then adjust your

display settings. For more information, see the Matrox PowerDesk online

documentation.

2

Cause

Files on your system may have been deleted or corrupted.

1

Solution

Remove, then restore Matrox software:

Windows 98/Me/2000 or NT 4.0 –

1

If your primary display is unusable, restart your computer in safe mode or VGA mode

(see “Restarting in safe mode”, page 13).

2

To remove Matrox software, click

#

Settings

#

Control Panel

#

Add/Remove

Programs

(double-click)

#

Matrox Graphics Software (remove only)

#

Add/Remove

#

Yes

.

Note:

In multi-display mode (see “DualHead Multi-Display setup”), each monitor has its

own monitor settings (refresh rates).

NTNT

Note:

Before removing software, make sure you have all the necessary files to reinstall

software that may still be needed. Also, make sure the display driver you reinstall supports

all

Matrox products in your computer.

18 Matrox Graphics Card – User Guide

3

After removing Matrox software, install the latest display driver for your Matrox graphics

card. You may also need to reinstall other Matrox software.

More information

We provide additional documentation in help files,

Readme

files, and Adobe Acrobat PDF (Portable

Document Format) files. To view or print PDF files, use the

Acrobat Reader

program, which you can

install from the Matrox installation CD-ROM. This guide is available on the CD-ROM as a PDF file

(

Doc\English\Guide\Guide_en.pdf

).

The online version of this guide has additional information, including the following sections:

“Matrox HeadCasting”, “TV output”, “Extra troubleshooting”, “Display information”, “Hardware

information”, “Customer support”, “Warranty”, and “Software license agreement”. The “Extra

troubleshooting” section includes more information on the following problems:

• Can’t use Windows, Windows reports a

configuration error, and/or can’t install or uninstall

Matrox display driver

• Monitor settings aren’t automatically detected

• After game for Windows 98/Me/2000 starts,

monitor doesn’t display properly

• Setup program reports an IRQ problem

• Game for Windows 98/Me doesn’t start or runs

slower than normal

• After restarting computer, Windows 98/Me warns

that the graphics card isn’t configured correctly

• Using multiple displays under Windows

98/Me/2000 or NT 4.0, program doesn’t work with

main graphics card

• Not all graphics cards in the computer are fully

supported

• In multi-display mode, displays aren’t numbered

consecutively

• Screen image defects appear, program doesn’t run

properly, or Windows doesn’t work properly

• Program window or dialog box doesn’t appear on

screen

• Display on digital monitor appears blurry or uses

only a portion of the screen

• Video file playback is jerky (skipping frames)

• Can’t view video

• Mouse pointer flickers or disappears when it’s over

a video window

• DVD video playback is jerky (skipping frames)

• Can’t play certain DVD videos

• Can’t record DVD video

• TV image is garbled or unusable

• Computer text is hard to read with a TV

• Poor TV or video recorder image quality

• Can’t record video with a video recorder

• Sound doesn’t record, video files play back with no

sound, or sound output is distorted or too loud

Note:

Be sure to check for any last-minute release notes at the end of this manual and in the

Matrox CD-ROM

Readme

file. Also, check the Matrox Web site (www.matrox.com/mga) for

the latest Matrox software, technical support, and product information.

Matrox Graphics Card – User Guide 19

Matrox HeadCasting

With Matrox

HeadCasting

, you can use real-time 3D animated heads in programs that support this

feature. The 3D head can be an existing one or you can get a customized one (for example, using your

own image). You can use HeadCasting with the following software included with certain Matrox

products:

!

Matrox Virtual Presenter

– Enhance Microsoft PowerPoint

presentations with audio and an animated 3D lip-synching head.

After preparing such a presentation, play the presentation with the

included

Matrox Presenter Player

. This player may be distributed

free of charge.

!

LIPSinc HeadFone

– Communicate by voice over the Internet

using a 3D lip-synching head.

Getting a Digimask file

To use HeadCasting, you need a Digimask (

*.dmk

) file. You can use Digimask files included

with your Matrox product or supplied by others.

Also, you can get your own custom Digimask file. To do this:

1

Get two digital images of the head you want to use – one from

the front and one from the side.

These images need to be Windows bitmaps (

*.bmp

) or JPEG

(

*.jpg

) files. If you’re using a standard camera, you can transfer

your pictures to your computer using a scanner. Software for

converting and manipulating digital images is widely available

and is included with most digital cameras and scanners.

2

Install and then run

Digimask LaunchPad

on your computer. To use LaunchPad, your

computer needs an Internet connection. The LaunchPad setup program is included with

your Matrox product or is available on the Web at www.digimask.com

. After starting

LaunchPad, follow the on-screen instructions.

After your Digimask file is sent to you over the Internet, you can use it with other Digimask-

supporting software (for example, Matrox Virtual Presenter). For more information on

using a Digimask file with specific software, see the documentation of that software.

Note:

For more information on the software included with your Matrox product, see the

online documentation included with the software.

20 Matrox Graphics Card – User Guide

TV output

You can use the TV output adapter

*

to connect a TV or video

recorder to view or record the secondary display of your

Matrox graphics card. If a TV output adapter wasn’t included

with your Matrox product, you can purchase it separately (see

http://shopmatrox.com

). This section describes how to use the

TV output

feature.

Connection setup

1

Turn of f co mpu t er

Windows 98/Me/2000 or NT 4.0 –

To shut down your computer, click

#

Shut Down

#

Shut down

#

OK

, then turn off your computer.

2

Attach TV adapter

If your Matrox card has an HD-15

connector, attach your Matrox TV

output adapter to this connector. If

you’re using an analog

*

dual-monitor

cable, attach your TV output adapter to

the connector labeled

2

(or

2/4

).

*TV output isn’t supported with a digital dual-monitor cable.

Note:

TV output isn’t supported with full-screen DOS display modes (for example, the

information you see before Windows starts) or with standard VGA mode (for example, when

you restart Windows in “safe mode”). Older programs may use these display modes. While

one of these display modes is in use, your TV displays nothing (black).

VIDEO OUT

S-VIDEO OUT

TV output adapter

WA R NI N G:

Don’t change monitor connections while your computer is turned on. While

your computer is turned on, it may be using monitor settings that are specific to the current

monitor connections.

If a display device (monitor, TV or video recorder) is connected while your computer is using

settings intended for another display device, the display of the new device may be garbled or

unusable.

Some

devices may be permanently damaged if incorrect settings are used.

TV output

adapter

Matrox card

HD-15

connector

La page charge ...

Matrox Millennium G550 Manuel utilisateur

Matrox Millennium G550 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents