Soundcast VG7 Guide de démarrage rapide

Marque: Soundcast

Modèle: VG7

Catégorie: Hauts-parleurs portatifs

Taper: Guide de démarrage rapide

NFC Link: location for pairing of

smartphones with NFC.

Enlace NFC: ubicación para sintonizar

smartphones con NFC.

Liaison NFC: emplacement de raccordement

de smartphones équipés de NFC

Indoor/Outdoor EQ LED

Luces LED para interiores/exteriores

Voyant d’intérieur/extérieur

Control Keypad

Teclado de control

Pavé de commande

USB Mobile Charging Output

Salida USB para la carga de celulares

Sortie de charge USB pour portables

Aux Input Jack: 3.5mm jack

Clavija de entrada auxiliar: clavija de

3.5 mm

Entrée auxiliaire : prise jack de 3,5 mm

Power Input Jack

Clavija de entrada de alimentación

Prise jack d’entrée d’alimentation

VG7 Connections and Controls

Conexiones y controles del VG7

Connexions et commandes du VG7

Connecting and Pairing

Conexión y sintonización

Connexion et appariement

Bluetooth Pairing with NFC

Sintonización de Bluetooth con NFC

Appariement Bluetooth avec NFC

1. Enable Bluetooth and NFC functions on your phone

then press Bluetooth button on VG7

Habilite las funciones de Bluetooth y NFC en su teléfono,

luego presione el botón Bluetooth en el VG7

Activez les fonctions Bluetooth et NFC sur votre téléphone,

puis appuyez sur le bouton Bluetooth du VG7

2. Hold phone over the NFC logo on VG7 until

phone connects

Sostenga su teléfono sobre el logo de NFC en el VG7

hasta que el teléfono se conecte

Placez votre téléphone sur le logo NFC

du VG7 jusqu’à

ce que le téléphone se connecte

3. Press OK on your phone to connect

Presione OK en su teléfono para conectarse

Appuyez sur OK sur votre téléphone pour vous connecter

4. Play audio

Reproduzca el audio

Lecture audio

Standard Bluetooth Pairing

Sintonización estándar con Bluetooth

Appariement Bluetooth standard

1. Enable Bluetooth on your smartphone

Habilite Bluetooth en su smartphone

Activez la fonction Bluetooth sur votre téléphone

2. Pair a new device: press and hold the VG7 Bluetooth

button for 3 seconds (Bluetooth LED will blink

slowly)

Sintonice un nuevo dispositivo: presione y sostenga el

botón Bluetooth del VG7 por 3 segundos (la luz LED de

Bluetooth titilará lentamente)

AUX

Pour apparier un nouvel appareil : appuyez sur le bouton

Bluetooth du VG7 et maintenez-le enfoncé pendant 3

secondes (le voyant Bluetooth se met à clignoter lentement)

3. From Bluetooth menu on phone, select “VG7 by

Soundcast”

Desde el menú de Bluetooth en su teléfono, seleccione “VG7

by Soundcast”

Sur le menu Bluetooth de votre téléphone, sélectionnez

« VG7 by Soundcast »

4. Once paired, the Bluetooth LED becomes solid.

Una vez sincronizado, la luz LED de Bluetooth se vuelve

sólida.

Une fois les deux appareils appariés, le voyant Bluetooth

demeure allumé en continu.

Press Bluetooth button to reconnect to previously

paired devices.

Presione el botón Bluetooth para reconectarse a otros

dispositivos previamente sincronizados.

Appuyez sur le bouton Bluetooth pour vous reconnecter à

des appareils déjà appariés.

To clear all devices from memory, press and hold the

Bluetooth key for 10 seconds. The Bluetooth LED will

double blink when memory is clear.

To clear all devices from memory, press and hold the

Bluetooth key for 10 seconds. The Bluetooth LED will double

blink when memory is clear.

To clear all devices from memory, press and hold the

Bluetooth key for 10 seconds. The Bluetooth LED will double

blink when memory is clear.

Aux Input Mode

Modo de entrada auxiliar

Mode d’entrée auxiliaire

Plug external source into 3.5mm jack to automatically

switch to Aux Input mode, LED turns YELLOW. Remove

plug to switch back to Bluetooth.

Enchufe la fuente externa en la clavija de 3.5 mm para

conmutar automáticamente al modo de entrada auxiliar, la luz

LED se volverá AMARILLA. Retire el enchufe para regresar a los

modos Bluetooth.

Raccordez la source externe dans la prise jack de 3,5 mm pour

passer automatiquement en mode d’entrée auxiliaire. Le voyant

jaune s’allume. Retirez la che jack pour revenir au mode

Bluetooth.

TrueWireless™ Stereo (TWS) Pairing

With TWS, two VG7 units may be paired for synchronous

Bluetooth play. On/off, volume, track controls and TWS

Mode will be synced and may be controlled from either

unit.

With TWS, two VG7 units may be paired for synchronous

Bluetooth play. On/off, volume, track controls and TWS Mode

will be synced and may be controlled from either unit.

With TWS, two VG7 units may be paired for synchronous

Bluetooth play. On/off, volume, track controls and TWS Mode

will be synced and may be controlled from either unit.

1. Both Speakers must be in Bluetooth Mode (no Aux

input connected).

Both Speakers must be in Bluetooth Mode (no Aux input

connected).

Both Speakers must be in Bluetooth Mod (no Aux input

connected).

2. Press and hold the TWS button on the rst VG7 unit

until TWS LED fast blinks blue. Repeat with the

second VG7 unit.

Press and hold the TWS button on the rst VG7 unit until

TWS LED fast blinks blue. Repeat with the second VG7 unit.

Press and hold the TWS button on the rst VG7 unit until

TWS LED fast blinks blue. Repeat with the second VG7 unit.

4. When paired, the TWS LED on both units will show

both blue and orange.

When paired, the TWS LED on both units will show both blue

and orange

When paired, the TWS LED on both units will show both blue

and orange.

5. Reconnecting: The TWS-paired units will re-connect

automatically, shortly after power-up. A short press of

the TWS button on either unit allows cycling through

the TWS modes (stereo, left/right, off) listed below:

Reconnecting: The TWS-paired units will re-connect

automatically, shortly after power-up. A short press of the

TWS button on either unit allows cycling through the TWS

modes (stereo, left/right, off) listed below:

Reconnecting: The TWS-paired units will re-connect

automatically, shortly after power-up. A short press of the

TWS button on either unit allows cycling through the TWS

modes (stereo, left/right, off) listed below:

LED blue and orange: left/right from each speaker

LED orange only: left from primary speaker, right

from secondary speaker

LED off: TWS off

LED blue and orange: left/right from each speaker

LED orange only: left from primary speaker, right from

secondary speaker

LED off: TWS off

LED blue and orange: left/right from each speaker

LED orange only: left from primary speaker, right from

secondary speaker

LED off: TWS off

No music or intermittent dropouts? VG7 Primary and

Secondary units may be too far away from each other.

No music or intermittent dropouts? VG7 Primary and

Secondary units may be too far away from each other.

No music or intermittent dropouts? VG7 Primary and

Secondary units may be too far away from each other.

Keypad Lockout Mode

This Mode locks all VG7 keys except the Power On/Off.

If any locked key is pressed, all LEDs will rapidly ash to

signify lockout mode. To toggle the keypad lockout on or

off, Power up the VG7 while simultaneously holding down

the Indoor/Outdoor and Mute Buttons.

This Mode locks all VG7 keys except the Power On/Off. If any

locked key is pressed, all LEDs will rapidly ash to signify

lockout mode. To toggle the keypad lockout on or off, Power up

the VG7 while simultaneously holding down the Indoor/Outdoor

and Mute Buttons.

This Mode locks all VG7 keys except the Power On/Off. If any

locked key is pressed, all LEDs will rapidly ash to signify

lockout mode. To toggle the keypad lockout on or off, Power up

the VG7 while simultaneously holding down the Indoor/Outdoor

and Mute Buttons.

AUX

Track Control Buttons:

Control compatible Bluetooth sources

Botones de control de pista:

Control compatible con fuentes conectadas a Bluetooth

Boutons de contrôle des pistes :

Contrôle des sources Bluetooth compatibles

Power On/Off Button

Botón de encendido/apagado

Bouton marche/arrêt

Aux Input LED: Lights YELLOW when Aux Input is

connected.

Luces LED de entrada auxiliar: Se encienden de

color AMARILLO cuando se conecta una entrada auxiliar.

Voyant entrée auxiliaire : S’allume en jaune lorsque

l’entrée auxiliaire est connectée.

TrueWireless™ Stereo (TWS) Button

and LED

Botón TrueWireless Stereo (TWS) y luz LED

Bouton TrueWireless Stereo (TWS) et LED

Bluetooth Button and LED

Botón Bluetooth y luz LED

Bouton et voyant Bluetooth

Mute Button and LED

Botón silenciador y luz LED

Bouton de sourdine et LED

Indoor/Outdoor EQ Button: Switches between indoor and outdoor modes.

• Outdoor Mode=EQ bass+, LED ON

• Indoor Mode=EQ bass–, LED OFF

Botón para interiores/exteriores: Permite conmutar entre los modos para interiores y

para exteriores.

• Modo para exteriores=EQ bass+, LED encendido

• Modo para interiores=EQ bass–, LED apagado

Bouton d’intérieur/extérieur : Bascule entre les modes en intérieur et en extérieur.

• Mode en extérieur = EQ bass+, DEL allumée

• Mode en intérieur = EQ bass–, DEL éteinte

Battery Indicator LED:

• Solid RED=charging • Off=charged • Blinking RED=low battery

Luz LED indicadora de la batería:

• ROJO sólido=se está cargando • Apagado= cargado • ROJO titilante=batería baja

Voyant de la batterie :

• Rouge xe = en cours de charge • Éteint = chargée • Rouge clignotant = batterie faible

Volume Buttons: Up and down volume controls. NOTE: set phone volume to 80%-

90% for best performance.

Botones de volumen: controles de aumento y disminución de volumen. NOTA: congure el

volumen del teléfono a 80%-90% para obtener el mejor rendimiento.

Boutons de volume : Commandes d’augmentation et de diminution du volume. REMARQUE :

réglez le volume entre 80 et 90 % pour une performance optimale.

✼

VG7 Quick Start Guide EN-SP-FR 121516-ER.indd 2 12/15/16 7:57 PM

Only supports charging

FCC Information and Copyright

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1)This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment .This equipment should be installed and operated with minimum distance 20cm

between the radiator& your body. This transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

Soundcast VG7 Guide de démarrage rapide

Marque: Soundcast

Modèle: VG7

Catégorie: Hauts-parleurs portatifs

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Soundcast VG7 Quick start guide

Soundcast VG7 Guide de démarrage rapide

Soundcast VG7 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents