Silvercrest 270744 Operating Instructions Manual

Catégorie
Hachoirs
Taper
Operating Instructions Manual

Ce manuel convient également à

MINCER SFW 350 C1
MINCER
Operating instructions
KØDHAKKER
Betjeningsvejledning
KÖTTKVARN
Bruksanvisning
FLEISCHWOLF
Bedienungsanleitung
IAN 270744
VLEESMOLEN
Gebruiksaanwijzing
HACHOIR À VIANDE
Mode d’emploi
GB / IE Operating instructions Page 1
SE Bruksanvisning Sidan 19
DK Betjeningsvejledning Side 37
FR / BE Mode d’emploi Page 55
NL / BE Gebruiksaanwijzing Pagina 73
DE / AT / CH Bedienungsanleitung Seite 91
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Vik ut bildsidan och ha den till hands när du läser igenom anvisningarna och gör dig bekant med
apparatens / maskinens funktioner.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Avant de lire le mode d’emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l’appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
A
B
0
9
7
65
8
w
q
e
1
4
2
3
C
t
u
z
r
GB
IE
 1
SFW 350 C1
Index
Introduction ...................................................2
Copyright .............................................................. 2
Limited liability ........................................................... 2
Intended use ..................................................2
Items supplied / Component description ............................3
Technical data .................................................3
Safety instructions .............................................4
Assembly / Disassembly .........................................6
Assembling the meat grinder ................................................ 6
Assembling the sausage stuffer attachment .................................... 7
Assembling the kubbe attachment ............................................ 8
Assembling the biscuit attachments ........................................... 8
Operation ....................................................9
Operating the appliance ................................................... 9
Processing meat .........................................................10
Processing sausage meat .................................................. 10
Using the kubbe attachment ............................................... 11
Making biscuits .........................................................11
Non-functionality .............................................12
Cleaning .....................................................12
Cleaning the motor block .................................................12
Cleaning the accessories ..................................................13
Storage .....................................................13
Disposal .....................................................14
Warranty and Service .........................................14
Importer .....................................................15
Recipes ......................................................15
Kubbe ................................................................15
Fresh Grill Sausages .....................................................16
Biscuits ................................................................17
2 
GB
IE
SFW 350 C1
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a part of this product. They contain important information in regard to safety,
use and disposal. Before using the product, familiarise yourself with all of these
operating and safety instructions. Use the product only as described and only for
the specified areas of application. Retain these instructions for future reference. In
addition, pass these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Limited liability
All technical information, data and instructions for the installation, connection
and operation contained in these operating instructions correspond to the latest
available at the time of printing and, to the best of our knowledge, take into
account our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to ob-
serve these instructions, improper use, incompetent repairs, making unauthorised
modifications or for using unapproved replacement parts.
Intended use
This appliance is intended only for the preparation of food in quantities expected
in domestic households:
Mincing fresh meat,
Making sausages with natural or artificial sausage skin,
Making biscuits
This appliance is not intended for the processing of frozen foods or other hard
foodstuffs, e.g. bones or nuts, or for use in commercial or industrial environments.
GB
IE
 3
SFW 350 C1
Items supplied / Component description
Figure A:
Biscuit attachment with pattern strips
Stodger
Feeding tray
Motor unit
Meat grinder casing made of metal
Transport screw
Spring
Cross blade
Cutting discs for coarse and fine mincing
Ring clamp
- Sausage stuffer attachment
3 Sausage disc
! Kubbe attachment
Figure B:
. Locking button
Figure C:
0 “I” button
6 “0” button
1 “<” button
Technical data
Voltage 220 - 240 V ∼, 50 Hz
Power consumption 250 - 350 W
Protection class
II /
C.O. Time 15 minutes
C.O. Time
The C.O. Time (Continuous Operation) details how long an appliance may be
used without the motor overheating and being damaged. After the appliance has
run for this period it must be switched off until the motor has cooled itself down.
4 
GB
IE
SFW 350 C1
Safety instructions
RISK OF ELECTRIC SHOCK
Ensure that the power cable does not become damaged. Pro-
tect the cable from heat and ensure that it cannot be trapped
or clamped.
Arrange for damaged power cables and/or plugs to be
replaced as soon as possible by a qualified specialist or by
Customer Services.
Use the appliance only in dry indoor areas, not outdoors.
Never immerse the motor block in water or any other
liquid! If you do, then you could receive a potentially
fatal electric shock.
WARNING!
Never use the appliance for purposes other than those listed
here. There will be a major risk of serious accidents should
you try to neutralise the safety fitments on the appliance!
WARNING! RISK OF INJURY!
Never put your hand into the openings of the appliance. Do
not insert any objects of any kind into the openings – except
for the appropriate stodger and the foodstuff to be processed.
If you do, there will be a serious risk of accidents!
Unplug the appliance from the power source before attaching
or removing accessories.
Do not leave the appliance unsupervised when it is ready
for use. To avoid it being switched on accidentally, always
unplug the appliance after use or during breaks.
Only use the original accessory parts for this appliance.
Other accessories may not meet the safety requirements.
GB
IE
 5
SFW 350 C1
WARNING! RISK OF INJURY!
Never operate the appliance in a no-load condition. This
could irreparably damage the appliance.
Before changing accessories or additional parts that are in
motion during operation, the appliance must be switched off
and disconnected from mains power.
Never use the appliance for purposes other than those
described in these instructions.
Warning – the cross blade is very sharp! Always take care
when handling and cleaning the appliance.
The appliance should always be disconnected from the
mains when unattended and before assembly, disassembly
or cleaning.
This appliance may not be used by children.
The appliance and its connecting cable must be kept away
from children.
This appliance may be used by persons with limited physical,
sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or
have been told how to use the appliance safely and are
aware of the potential risks.
The appliance must not be used as a plaything by children.
6 
GB
IE
SFW 350 C1
Assembly / Disassembly
CAUTION - PROPERTY DAMAGE!
All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw in the meat grinder casing .
2) Place the spring onto the transport screw .
3) Then fit the cross blade on so that the sharp side points away from the
spring . Ensure that the square opening in the cross blade is placed
correctly on the square axle.
WARNING! RISK OF INJURY!
The cross blade is very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
The appliance will be damaged if the cross blade is inserted the other
way around!
4) Select the appropriate cutting disc /sausage disc 3.
GB
IE
 7
SFW 350 C1
5) Place your selected cutting disc into the meat grinder casing so that
the fixings on the cutting disc are located in the openings in the meat
grinder casing .
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
7) The ready-assembled meat grinder casing is connected by a bayonet
connector to the motor block :
Insert the meat grinder casing into the motor block such that the
arrow on the meat grinder casing lies against the symbol
on the
motor unit . The locking button .presses itself in (Fig. B).
Lightly press the meat grinder casing in and at the same time turn
the feeding shaft on the meat grinder casing into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol
.
When the meat grinder casing engages, the locking button .
springs out.
Finally, place the feeding tray on top of the feeding funnel.
To dismantle it, press the locking button .and turn the feeding funnel
to the right (Fig. B)
. You can now pull the meat grinder casing out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw , the spring and the cross blade back into
the meat grinder casing .
5) Insert the sausage disc 3 so that the fixings on the sausage disc 3 are
located in the openings in the meat grinder casing .
6) Then place the sausage stuffer attachment - before the sausage disc 3.
7) Screw the ring clamp on hand-tight.
8) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.
8 
GB
IE
SFW 350 C1
Assembling the kubbe attachment
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing .
NOTICE
For the kubbe attachment !, the cross blade with the spring is not
required! If need be, remove them both from the meat grinder casing .
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment ! so that the fixings on
the bottom kubbe attachment ! ring are located in the openings in the meat
grinder casing .
5) When everything has been attached correctly, screw the ring clamp back
on hand-tight.
6) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing .
NOTICE
For the biscuit attachment , the cross blade with the spring is not
required! If need be, remove them both from the meat grinder casing .
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips away from the front of the biscuit attachment .
5) First place the plastic disc and then the metal disc of the biscuit attachment 
into the meat grinder casing (see fold-out side). Insert the biscuit attach-
ment . so that the fixings on the biscuit attachment . are located in the
openings in the meat grinder casing .
6) After everything has been correctly assembled, screw the ring clamp
back on hand-tight.
GB
IE
 9
SFW 350 C1
7) Replace the pattern strips back in to the front of the biscuit attachment .
Ensure that the grip on the pattern strips points away from the appliance.
If it does not, you will not be able to adjust the pattern, which is located
directly on the grip.
8) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.
9) To dismantle it, you must first remove the pattern strips before you can
screw the ring clamp open and take the biscuit attachment back out.
Operation
RISK OF ELECTRIC SHOCK
NEVER open the housing of the motor block – it does not contain any
user-serviceable elements. If the housing is opened, the warranty becomes
void. If the housing is opened, there is a risk of receiving a potentially fatal
electric shock.
CAUTION - PROPERTY DAMAGE!
Do not use the appliance for longer than 15 minutes continuously. To avoid
an overheating of the appliance, after such a period switch it off and allow
it to cool down for ca. 30 minutes.
NEVER activate the buttons "I" 0 or "<" 1, during a change of rotation
direction, if the appliance motor has not come to a complete stop. This
could damage the motor.
Operating the appliance
Once the appropriate attachments have been fixed:
1) Place the appliance where it will at all times be absolutely stable and under
no circumstances could it fall off of the work surface or in any way come into
contact with water (due to vibrations or becoming snagged in the power
cable). Vibration is unavoidable when it is working.
RISK OF ELECTRIC SHOCK
Never touch an appliance, which is plugged in or is operational when it
happens, that falls or lands in water – or in the case of other emergencies!
First disconnect the appliance from the mains power source in all emergency
situations! Otherwise you run the risk of serious injury or loss of life!
2) Put the food which is to be processed in the feeding tray and place a
catchment container at the front under the exit opening.
10 
GB
IE
SFW 350 C1
3) First press the button “0” 6to check that the appliance is still switched off.
Otherwise there is a risk that the appliance could unintentionally start
when the plug is inserted into the power socket.
4) Then insert the plug into a mains power socket.
5) Press the button “I” 0 to start the appliance.
WARNING! RISK OF INJURY!
Push the foodstuff into the feeding shaft ONLY with the round stodger
NEVER with one’s fingers, forks, spoons or similar objects. That could lead
to physical injury and also damage the appliance.
CAUTION - PROPERTY DAMAGE!
Do not ever press so hard that the motor gets audibly slower. This could
overburden the machine and damage it.
Processing meat
1) Use pieces of meat that fit easily into the feeding funnel. If necessary, cut the
meat to size beforehand. Check that the meat does not have any bones and
or tendons.
WARNING!
Minced meat is very prone to bacterial contamination. Therefore take care
to maintain good hygiene when processing meat. If you do not, it may
cause serious health problems.
2) When you have read and understood all of the instructions on the topic
”Meat“, you can now use the appliance as described in the chapter
“Operating the appliance”.
Processing sausage meat
1) Pass meat through the meat grinder twice before using it as sausage stuffing.
2) To make sausage stuffing, add some chopped onions, spices and other
ingredients to the minced meat, as per your recipe, and knead the mixture
well. Refrigerate this for 30 minutes before processing it further.
3) Pull one end of the sausage skin (natural or artificial sausage skin) onto the
sausage stuffer attachment - and tie a knot in the other end. For 1 kg of the
filling, you will need approximately 1.60 m of sausage skin.
GB
IE
 11
SFW 350 C1
TIP!
Soak the natural sausage skin in lukewarm water for about 3 hours before
using it and wring it out before attaching it. This will make the natural sau-
sage skin more elastic. Natural sausage skins are available from butcher
suppliers close to slaughter houses or from your family butcher.
4) The sausage mixture will be pressed into the sausage skin by the sausage
stuffer attachment -. When it is long enough switch the appliance off, press
the sausage together at the ends and rotate it a couple of times along its
longitudinal axis.
TIP!
Sausage meat tends to expand when cooked or frozen. Therefore, to
prevent it from bursting it is best not to overstuff the sausage.
5) When you have read and understood all of the instructions on the topic
”Sausage”, you can now use the appliance as described in the chapter
“Operating the appliance”.
Using the kubbe attachment
With the kubbe attachment ! foodstuffs can be processed to form hollow rolls
of meat or vegetables, which can then be stuffed as desired.
1) First put the meat through the meat grinder twice before pressing it through
the kubbe attachment !.
2) When you have read and understood all of the instructions on the topic
“Kubbe-Attachment”, you can now use the appliance as described in the
chapter “Operating the appliance”.
Making biscuits
After you have made the biscuit pastry according to your recipe, and after having
fixed the biscuit attachment :
1) Line a small baking tray with greaseproof paper and place or hold it directly
under the exit opening at the front of the appliance.
2) Press pastry evenly into the meat grinder casing – the transport screw 
then pushes it through the selected design on the design motif strip of the
biscuit attachment .
3) When the biscuit is the required length, stop the appliance and break the
pastry off at the exit opening. Lay the biscuits on the baking tray.
4) When you have read and understood all of the instructions on the topic
“Biscuits”, you can now use the appliance as described in the chapter
“Operating the appliance”.
12 
GB
IE
SFW 350 C1
Non-functionality
If the drive is blocked by accumulated food:
Press the button “0” 6to stop the meat grinder.
Press and hold the button “<” 1. The appliance will now run in the reverse
direction. This enables you to transport the food which has become stuck a
short way backwards, and the motor to run freely again.
When the drive runs smoothly again, release the “<” 1button.
Press the button “I” 0to re-start the meat grinder.
If you do not succeed in getting the drive free with this, clean the appliance
as described in the chapter “Cleaning”.
Should the motor suddenly stop, it could be due to automatic
activation of the internal overload fuse. This is intended to
protect the motor.
Switch the appliance off and allow it cool down for approximately 30 minutes
before continuing to use it.
Should this not work, wait for a further 15 minutes.
If it still does not function at the end of this period, this indicates a technical
problem. In this case, contact the Customer Service Centre.
If the power cable is damaged or the accessories are
visibly damaged:
Immediately switch the appliance off by pressing the “0” 6 button!
If this is not possible without risk to personal safety, disconnect the plug from
the mains power socket.
Arrange for the defective parts to be repaired by Customer Services before
re-using the appliance.
Cleaning
RISK OF ELECTRIC SHOCK
Disconnect the plug from the mains power socket before cleaning the appli-
ance. In this way accidents caused by the inadvertent switching on of the
appliance and electric shocks can be avoided.
Cleaning the motor block
Clean the exterior surfaces and the power cable with a slightly damp cloth.
Dry the appliance well before re-using it.
GB
IE
 13
SFW 350 C1
RISK OF ELECTRIC SHOCK
Never immerse the motor block in water or any other liquid! Should this
occur, you are at risk of a potentially fatal electric shock if permeating
moisture makes contact with the electrical wiring.
CAUTION - PROPERTY DAMAGE!
Never use detergents, abrasive cleaners or solvents. These could damage
the appliance and leave residues on the foodstuffs.
Cleaning the accessories
NOTICE
Do not clean the accessories in a dishwasher! This could cause damage to
them!
Clean the accessories that could come in contact with foodstuffs, ...
by hand only, the accessories are not dishwasher safe.
with hot water and a household detergent suitable for use with foods.
WARNING! RISK OF INJURY!
The cross blade is very sharp! Risk of injury!
Dry all parts thoroughly, before re-using the appliance.
NOTICE
Apply a light coating of cooking oil to all metallic components after each
cleaning Otherwise, metal parts can discolour!
Storage
Push the power cable (but not the plug) into the cable storage shaft under
the appliance base. There it is protected from damage.
Store the appliance at a dry location.
After drying the metal attachments coat them lightly with a little cooking oil –
if you are not going to use the appliance immediately. This will protect them
from corrosion.
Store the appliance where it will be out of reach of children and people
requiring supervision. They are not always able to correctly assess the
potential risks involved with using electrical appliances.
14 
GB
IE
SFW 350 C1
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Dispose of all packaging materials in an environmentally friendly manner.
Warranty and Service
The warranty for this appliance is for 3 years from the date of purchase. This appli-
ance has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim,
please make contact by telephone with our service department. Only in this way
can a post-free despatch for your goods be assured.
NOTICE
The warranty covers only claims for material and manufacturing defects, not
for transport damages, worn parts or for damage to fragile components,
e.g. buttons or batteries.
The appliance is intended for domestic use only, NOT for commercial purposes.
If this product has been subjected to improper or inappropriate handling, abuse,
or modifications not carried out by one of our authorised sales and service
outlets, the warranty will be considered void.
Your statutory rights are not restricted in any way by this warranty. The warranty
period is not extended by repairs effected under warranty. This applies also to
replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after
unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
The warranty period is not extended by repairs effected under warranty.
This applies also to replaced and repaired parts.
Damages or defects discovered after purchase are to be reported directly after
unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
GB
IE
 15
SFW 350 C1
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
IAN 270744
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
IAN 270744
Hotline availability: Monday to Friday 08:00 - 20:00 (CET)
Importer
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
Recipes
Kubbe
Ingredients for the wrapping
450 g of lean Lamb, Veal or Beef
150 g Flour
1 Tsp Pimento (type of pepper)
1 Tsp Nutmeg
1 Pinch Chili powder
1 Pinch Pepper
Ingredients for the meat filling
700 g Mutton
1 1/2 Tbsp. Olive oil
1 1/2 Tbsp Onions, finely chopped
1/2 Tsp Pimento (type of pepper)
1/2 Tsp. Salt
1 1/2 Tbsp Flour
16 
GB
IE
SFW 350 C1
Pass the meat for the wrapping through the meat grinder twice (first with the
coarse and then with the fine cutting discs ) and then combine it with the
ingredients. Then pass this mixture through the meat grinder twice. Exchange
the cutting disc for the Kubbe attachment ! (see chapter “ Assembling the
kubbe attachment”).
Shape the Kubbe wrappers with the Kubbe attachment ! and then freeze them.
Filling:
Pass the meat through the meat grinder twice (first with the coarse and then with
the fine cutting discs ). Saute the onions and then mix them well with the meat
and other ingredients. Fill the Kubbe wrappers and fry until done.
Alternative Fillings:
250 g steamed Broccoli
or 250 g steamed Zucchini
or 250 g cooked Rice
Fresh Grill Sausages
Ingredients:
300 g lean Beef
500 g lean Pork
200 g Shoulder bacon
20 g Salt
1/2 Tsp ground white Pepper
1 Tsp Caraway
1/2 Tsp Nutmeg
Pass the beef, pork and bacon through the meat grinder twice.
Add the mixed spices and salt and thoroughly knead for 5 minutes.
Place the sausage filling in the refrigerator for ca. 30 minutes. Fill the skins with
sausage meat as detailed (see chapter “Preparing sausage”) and make sausages
of ca. 25 cm in length.
Grill the sausages well and eat them on the same day.
GB
IE
 17
SFW 350 C1
Biscuits
Ingredients:
500 g butter
500 g sugar
2 - 3 packets of vanilla sugar
1 packet of vanilla custard
1/4 tsp salt
1 egg
4 egg yolks
800 g plain flour
2 tbsp baking powder
200 g ground (blanched) almonds
Zest of a lemon
Beat the butter until fluffy. Add the remaining ingredients one after another and
knead well into the dough. Cover the finished dough and allow to stand for around
12 hours in the fridge (e.g. overnight). Then pass it through the meat grinder with
the biscuit attachment . Place the biscuits on a baking tray lined with baking
paper. Bake the biscuits in a pre-heated oven at 180°C for approx. 10 - 15 minutes
until golden brown.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111

Silvercrest 270744 Operating Instructions Manual

Catégorie
Hachoirs
Taper
Operating Instructions Manual
Ce manuel convient également à

dans d''autres langues