Haier LT19M1CW Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur

Ce manuel convient également à

USER'S MANUAL
LCD TV RECEIVER
Please read this manual carefully before
using your television and keep this manual
In a good place for future reference.
MODEL:
L T19M1CW,LT19M2CW
L T22M1CW,LT26M2C
L T26M1C
Q41G2202672 2B
WARNING
Misuse or modification of this appliance may result in breakdown or injury.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
IMPORTANT INFORMATION
The appliance is intended for household use only.
The appliance should always be turned to OFF before plugging or unplugging from socket. Never
yank cord to disconnect from socket; instead, grasp plug and pull to disconnect.
Check that the voltage on the rating plate of your product corresponds with your local electricity
supply which must be A.C. (Alternating Current).
If the mains sockets in your home are not suitable for the plug supplied with this product, check
with a qualified electrician for replacement.
FOR OPTIMUM PERFORMANCE
Do not use in environments which are extremely hot, cold, dusty or humid.
Keep the unit free from dust and clean with a dry cloth.
Do not use in areas exposed to direct sunlight or where it can become extremely hot.
Avoid placement where there is a lot of movement, vibration or on an unstable surface.
To reduce the risk of fire or electric shock, the equipment shall not be exposed to rain or moisture
and objects filled with liquids, such as vases, shall be placed on the apparatus.
To avoid fire, no naked flame source, such as lit candles, should be placed on or around the unit.
FFor ventilation, leave at least 10 cm free all around the TV. Do not place the TV on a carpet.
The ventilation holes must be kept clear from obstructions.
In case of smoke, or unusual noises or smells coming from the unit, switch it off, unplug it from
the wall socket and contact your dealer or service center.
Place the TV in such a position that the screen is not exposed to direct sunlight. It is best to have
soft indirect lighting whilst watching TV. Avoid dark environments and screen reflection as these
may cause eye fatigue.
When the TV has been moved from a cold place, it will need time for the moisture from inside to
evaporate.
The appliance coupler is used as the disconnect device of this apparatus, the disconnect device
shall remain readily operable.
IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before use and keep for future reference.
Keep away from sources of strong magnetism - such as speakers.
• The equipment shall not be exposed to dripping or splashing.
The apparatus must be connected to a mains socket outlet with a protected earthed connection.
CHILDREN
Children do not always understand the dangers associated with operating electrical appliances.
Never allow children to use this appliance.
POWER SUPPLY
If the unit uses a mains supply, ensure that the plug is securely inserted into the mains socket,
and it is easily accessible.
Protect the power lead from sharp objects, excessive heat and damp or wet locations. Check
the power lead periodically, and replace if damaged.
If the unit uses batteries, please ensure that they are inserted correctly - observing the polarity
(+/-).
Do not mix new and used batteries.
Please make sure that used batteries are disposed of correctly. Do not burn or incinerate.
Check that the voltage on the rating plate of your product corresponds with your local electricity
supply which must be A.C. (Alternating Current).
Any repairs should only be carried out by a fully qualified electrician or an authorised service agent.
LISTENING WITH EARPHONES
Listen at moderate volumes to avoid hearing damage.
If you hear no sound during playback, do not turn the volume up as the music may suddenly begin
at a high volume. Excessive sound pressure from earphones and headphones can cause hearing loss.
To avoid damaging your ears, adjust the volume to the lowest level before playback, and turn up
to the desired level when playback has started.
IMPORTANT SAFETY INSTRUCTIONS
Read all instruction before use and keep for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK), THERE ARE NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
FOR SAFETY
DO NOT:
Attempt to disassemble this unit or carry out repairs.
Attempt to modify the unit in any way.
Make sure that foreign objects do not get inside the unit.
Place naked flame sources - such as lit candles on or near the unit.
Place objects filled with liquids - such as vases, on or next to the unit.
Cover the unit - allow the unit to be well ventilated.
Drop the unit or subject it to strong shocks.
Attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
EN
1
Know Your Machine ......................................................................................... 3
Remote Control ................................................................................................ 6
Wall Mounting.................................................................................................... 8
Antenna Connection ......................................................................................... 10
Tuning Menu Options ...................................................................................... 11
Other Connections ............................................................................................ 13
Basic Operation ................................................................................................ 18
Menu Operation ................................................................................................ 22
Teletext .............................................................................................................. 32
Common Interface Module ............................................................................... 34
Troubleshooting ............................................................................................... 36
Specifications .................................................................................................. 37
CONTENTS
HD Ready Digital LCDTV User Manual
NOTE: This LCD cabinet drawing is a sample and may not depict
your actual LCD
cabinet design.
2
KNOW YOUR MACHINE
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
Q
R
S
T
U
V
X
Y
1 x Remote Control
POWER
VIDEO
SCART
TV
PC
Numerical Buttons
EPG
PRE PR
ASPECT
SOURCE
NICAM
SLEEP
PICTURE
PR LIST
SOUND
VOL
MUTE
PR
DISPLAY
MENU
EXIT
OK
Navigation Buttons
Green Button
Yellow Button
Blue Button
Red Button
MIX
TELETEXT
SIZE
SUBPAGE
INDEX
SUBTITLE
REVEL/Tick
HOLD/VIEW
A
B
C E
D
F
G
H
K
J
M
L
N
P
O
Q
R
S
T
U
V
Y
X
a
b
d
g
f
m
n
k
h
p
q
q
a
b
d
e
g
h
k
m
n
p
e
f
EN
3
KNOW YOUR MACHINE
B
D
F
G
H
J
M
N
O
P
C
E
Power LED
Wall Mount Hole
Volume Up
Volume Down
Channel Up
Channel Down
MENU Button
Source Button
Power Button
Common Interface Slot
Headphone Output
Audio Input
Video Input
S-Video Input
HDMI 2 Input
Antenna Input
SCART Input
PC Audio Input
SPDIF Output
Component Input
HDMI 1 Input
Power Connector
VGA Input
K
L
Q
R
S
T
A
U
V
X
Y
HD Ready Digital LCDTV User Manual
1 x LCD TV
Control Panel
Rear Connections
A
C
D
E
F
G
H
J
Y
B
V
X
4
KNOW YOUR MACHINEKNOW YOUR MACHINE
HD Ready Digital LCDTV User Manual
EN
1 x AC Power Cord
Z
2 x AAA Battery
a
Front View
Side Connections
Rear View
K
L
N
O
QS RT
U
M
V
P
5
2. Insert two new 1.5V size AAA
Batteries with the and marks
correctly aligned.
See fig. 2.
NOTE ON BATTERIES:
Do not mix different types of
batteries or an old battery with
a new one.
To prevent the risk of leakage
or explosions, never recharge
the batteries, apply heat or take
them apart.
When not using batteries,
remove them to prevent battery
drain.
If liquid leaks from the batteries,
throw them away. Thoroughly
clean the battery compartment
with a dry cloth.
REMOTE CONTROL
1. Unclip the Battery Cover from the
Remote Control.
See fig. 1.
REMOTE CONTROL
NOTES:
- Please read the important safety
instructions before use.
fig. 1
Battery
Compartment
Cover
fig. 2
HD Ready Digital LCDTV User Manual
6
3. Carefully close the Battery Cover.
See fig. 3.
REMOTE CONTROL
fig. 3
PRECAUTIONS:
To obtain the best performance
from your remote control, please
consider the following:
Ensure there is no obstruction
between remote control and
TV set.
Bright sunlight may affect the
remote control performance.
Always ensure that both
batteries are replaced at the
same time.
HD Ready Digital LCDTV User Manual
EN
7
IMPORTANT: When drilling into
walls always check that there
are no hidden wires or pipes etc.
Make sure that the screws and
wall plugs supplied are suitable
for supporting the unit. Consult
a qualified tradesperson if you
are not sure.
NOTE: It would be useful to ask
someone to help you at this
stage.
WALL MOUNTING
NOTES:
- Please read the important safety
instructions before use.
1. Put the unit face down on a safe,
flat surface that is covered by a
smooth cloth.
See fig. 4 and 5.
Stand
fig. 4
Screws
WALL MOUNTING (Optional)
fig. 6
fig. 5
Stand
2. Unscrew the screws of the stand.
Then remove the Stand.
See fig. 4 - 6.
HD Ready Digital LCDTV User Manual
8
4. For the Wall Bracket - Refer to
the user instructions supplied
with the wall bracket (not
included).
See fig. 8.
3. Use 4 Wall Mount Holes B and
Screws (not included) to mount the
TV on the Bracket (not included).
See fig. 7.
WALL MOUNTING
fig. 7
fig. 8
TV Screen
Size (inches)
VESA-Compatible
Wall bracket
(W x H mm)
Screw Type
W
H
19"
22"
26"
100 x 100 mm
100 x 100 mm
200 x 100 mm
Metric 4 x 10 mm
Metric 4 x 10 mm
Metric 4 x 10 mm
B
HD Ready Digital LCDTV User Manual
EN
9
NOTE: Make sure your local
voltage is 230V/240V~, 50Hz.
Z
Mains Socket
1. Connect the AC Power Cord Z
to the Power Connector X .
See fig. 9.
2. Connect the AC Power Cord Z
to the mains socket.
See fig. 9.
ANTENNA CONNECTION
Q
1. Connect the Antenna Plug to the
Antenna Input Q located at the
rear of the TV.
See fig. 9.
2. For optimum picture quality, adjust
the direction of the antenna.
3. To improve picture quality where
the signal is poor use a signal
amplifier (not included).
CONNECTING THE ANTENNA
Antenna Plug
fig. 9
X
WARNING:
- Switch off the TV before
connecting any external device.
AC POWER CORD CONNECTION
HD Ready Digital LCDTV User Manual
10
TUNING MENU OPTIONS
J
A
fig. 10
fig. 11
fig. 12
Thank you for your purchase of this TV.
Please proceed with the following steps to set-up your TV.
Next
A
TURN ON THE LCD-TV
1. When the POWER J or A is
pressed the TV will turn on and the
Power LED A on the front of the
TV will change from red to blue
See fig. 10 and 11.
2. When the LCD-TV is turned off
using the POWER J or A , the
LCD-TV will go into standby mode
and the Power LED A will turn
red.
See fig. 10 and 11.
FIRST TIME INSTALLATION
1. This display will appear on the
screen when the TV is turned on
for the first time.
See fig. 12.
NOTE: If you can not find this
screen press MENU U . Then
use the Natvigation Keys Y to
select the TV menu.
See fig. 11.
2. Press the Green Button a to
proceed with the installation.
See fig. 11.
U
Y
a
HD Ready Digital LCDTV User Manual
EN
11
4. Use Navigation Keys Y to select
your country. Then press Green
Button a to continue or press
Yellow b to go back.
See fig. 13 and 15.
5. System searching may take few
minutes to complete.
See fig. 16.
6. A message will be displayed when
the search is complete. Press Red
Button e to finish system
searching. The LCD TV will
automatically display the first
channel found automatically.
See fig. 13.
TUNING MENU OPTIONS
fig. 13
fig. 14
fig. 15
fig. 16
Next
TV Installation
Exit
System searching. Please wait...
Analog channels found: 0
Digital channels found: 0
3/3
3. Use Navigation Keys Y to select
your language. Then press Green
Button a to continue.
See fig. 13 and 14.
e
a
b
Y
Next
Language
TV Installation
Previous
English
Français
Italiano
Nederlands
Svenska
Dansk
Deutsch
Espanol
1/3
Next
Country
TV Installation
Previous
2/3
Gemary
Ireland
Czech Republic
Denmark
Finland
France
Austria
Belgium
HD Ready Digital LCDTV User Manual
12
WARNING:
- Switch off the TV before
connecting any external device.
OTHER CONNECTIONS
R
fig. 17
SCART1
SCART Lead
fig. 18
SCART INPUT
1. Plug the scart lead from the
external device into TV SCART
Socket R .
See fig. 17.
2. SCART 1 - Full SCART, which
transmits RGB, S-Video and CVBS
in and CVBS tuner out (Analog).
3. Press SCART C or SOURCE K
to select the SCART.
See fig. 18.
- To connect external devices
such as DVD players, set top
boxes or games consoles.
C
K
HD Ready Digital LCDTV User Manual
EN
13
OTHER CONNECTIONS
U
fig. 19
Audio Cables
fig. 20
YPbPr INPUT
3. Turn on the power of the LCD-TV
first and then turn on the power
of the AV device.
2. Connect the (Y, Pb, Pr) cables
and audio cables to the
Component and Audio Input
on
the TV.
See fig. 19.
1. Make sure that the power of the
LCD-TV and the AV device are
off.
- For connecting devices such as
video cameras.
K
YPr Pb
4. Press VIDEO B or SOURCE K
to select the YPbPr input.
See fig. 20.
B
HD Ready Digital LCDTV User Manual
14
U
U
VGA INPUT
OTHER CONNECTIONS
Y
fig. 21
SV
fig. 22
- You can use your LCD-TV as a
monitor for your personal computer.
1. Connect the D type 15-pin VGA
interface cable (not supplied) to
VGA Input Y on the LCD-TV.
See fig. 21.
2. Connect the audio cable (not
supplied) to Audio Input S on the
back of the LCD-TV (if necessary).
See fig. 21.
3. Press PC E or SOURCE K to
select the PC input.
See fig. 22.
1. Connect the cable from the HDMI
devices to the TV HDMI Input V .
See fig. 21.
2. Press VIDEO B or SOURCE K
to select the HDMI input.
See fig. 22.
3. Operate the corresponding external
equipment. (Refer to external
equipment operating guide.)
HDMI 1 INPUT
CAUTION: You must ensure both
devices are switched off before
connection.
to PC
K
B E
HDMI
Cable
HD Ready Digital LCDTV User Manual
EN
15
OTHER CONNECTIONS
O
fig. 23
fig. 24
M
N
AV INPUT
- For connecting an AV device.
1. Make sure that the power of the
LCD-TV and the AV device are off.
2. Connect the cables from the
AV device's output jacks to the
Audio
Input M .
See fig. 23.
3. Connect the cables from the
AV device's output jacks to the
Video
Input N .
See fig. 23.
turn on the AV device.
B or SOURCE K
to select the AV input.
See fig. 24.
K
B
S-Video Cable
S-VIDEO INPUT
- For connecting video recorders.
1. Make sure that the power of the
LCD-TV and the AV device are off.
2. Connect the audio and S-Video
cables from the VCR's output jacks
to the S-Video Input O and Audio
Input .
See fig. 23.
3. Turn on the LCD-TV first and then
turn on the VCR.
4. Press VIDEO B or SOURCE K
to select the S-VIDEO input.
See fig. 24.
N
video
audio
HD Ready Digital LCDTV User Manual
16
4. Turn on the LCD-TV first ; and then
5. Press VIDEO
OTHER CONNECTIONS
L
fig. 25
K
COMMON INTERFACE SLOT
HEADPHONE OUTPUT
1. Connect a set of stereo
headphones (not included) to the
Headphone Output L for private
listening. When headphones are
in use, the speakers will be
automatically disconnected.
See fig. 25.
IMPORTANT: When using
headphones always set the
volume control to a low level
before you put the headphones
on, then put the headphones
on and gradually increase the
volume to a comfortable
listening level.
P
HDMI 2 INPUT
- You can use a Conditional Access
Module (CAM) card to view Pay
TV.
1. Insert the CAM card (not included)
in Common Interface Slot K .
See fig. 25.
2. Please refer to the COMMON
INTERFACE section for more
detailed information.
- Same as HDMI 1.
HD Ready Digital LCDTV User Manual
EN
17
NICAM
1. Press NICAM L to select MONO,
STEREO, DUAL 1 and DUAL 2
for ATV channel. Select Audio
language for DTV channel.
See fig. 26.
BASIC OPERATION
fig. 26
AUDIO CONTROL
1. Press VOL+ Q to increase the
volume or VOL- Q to decrease
the volume. A number will
appear on screen indicating the
volume level.
See fig. 26.
MUTE
1. Press MUTE R to mute the
sound. A mute icon will appear
on the screen.
See fig. 26.
2. Press MUTE R again or
VOL+/VOL-to restore the sound.
The mute icon will disappear.
See fig. 26.
A
SELECT SOURCE
1. Press POWER A to turn on the
LCD-TV. Then press TV D , PC
E , SCART C , VIDEO B or
SOURCE K to select the source.
See fig. 26.
D
E
B
C
K
Q
R
L
HD Ready Digital LCDTV User Manual
18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200
  • Page 201 201
  • Page 202 202
  • Page 203 203
  • Page 204 204
  • Page 205 205
  • Page 206 206
  • Page 207 207
  • Page 208 208

Haier LT19M1CW Manuel utilisateur

Catégorie
Téléviseurs LED
Taper
Manuel utilisateur
Ce manuel convient également à