Haier LT26M1C Manuel utilisateur

USER'S MANUAL

LCD TV RECEIVER

Please read this manual carefully before

using your television and keep this manual

In a good place for future reference.

MODEL:

L T19M1CW,LT19M2CW

L T22M1CW,LT26M2C

L T26M1C

Q41G2202672 2B

WARNING

• Misuse or modification of this appliance may result in breakdown or injury.

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

IMPORTANT INFORMATION

• The appliance is intended for household use only.

• The appliance should always be turned to OFF before plugging or unplugging from socket. Never

yank cord to disconnect from socket; instead, grasp plug and pull to disconnect.

• Check that the voltage on the rating plate of your product corresponds with your local electricity

supply which must be A.C. (Alternating Current).

• If the mains sockets in your home are not suitable for the plug supplied with this product, check

with a qualified electrician for replacement.

FOR OPTIMUM PERFORMANCE

• Do not use in environments which are extremely hot, cold, dusty or humid.

• Keep the unit free from dust and clean with a dry cloth.

• Do not use in areas exposed to direct sunlight or where it can become extremely hot.

•

Avoid placement where there is a lot of movement, vibration or on an unstable surface.

• To reduce the risk of fire or electric shock, the equipment shall not be exposed to rain or moisture

and objects filled with liquids, such as vases, shall be placed on the apparatus.

•

To avoid fire, no naked flame source, such as lit candles, should be placed on or around the unit.

• FFor ventilation, leave at least 10 cm free all around the TV. Do not place the TV on a carpet.

• The ventilation holes must be kept clear from obstructions.

• In case of smoke, or unusual noises or smells coming from the unit, switch it off, unplug it from

the wall socket and contact your dealer or service center.

• Place the TV in such a position that the screen is not exposed to direct sunlight. It is best to have

soft indirect lighting whilst watching TV. Avoid dark environments and screen reflection as these

may cause eye fatigue.

• When the TV has been moved from a cold place, it will need time for the moisture from inside to

evaporate.

•

The appliance coupler is used as the disconnect device of this apparatus, the disconnect device

shall remain readily operable.

IMPORTANT SAFETY INSTRUCTIONS

Read all instruction before use and keep for future reference.

• Keep away from sources of strong magnetism - such as speakers.

• The equipment shall not be exposed to dripping or splashing.

•

The apparatus must be connected to a mains socket outlet with a protected earthed connection.

CHILDREN

• Children do not always understand the dangers associated with operating electrical appliances.

Never allow children to use this appliance.

POWER SUPPLY

• If the unit uses a mains supply, ensure that the plug is securely inserted into the mains socket,

and it is easily accessible.

• Protect the power lead from sharp objects, excessive heat and damp or wet locations. Check

the power lead periodically, and replace if damaged.

• If the unit uses batteries, please ensure that they are inserted correctly - observing the polarity

(+/-).

• Do not mix new and used batteries.

• Please make sure that used batteries are disposed of correctly. Do not burn or incinerate.

• Check that the voltage on the rating plate of your product corresponds with your local electricity

supply which must be A.C. (Alternating Current).

• Any repairs should only be carried out by a fully qualified electrician or an authorised service agent.

LISTENING WITH EARPHONES

• Listen at moderate volumes to avoid hearing damage.

• If you hear no sound during playback, do not turn the volume up as the music may suddenly begin

at a high volume. Excessive sound pressure from earphones and headphones can cause hearing loss.

• To avoid damaging your ears, adjust the volume to the lowest level before playback, and turn up

to the desired level when playback has started.

IMPORTANT SAFETY INSTRUCTIONS

Read all instruction before use and keep for future reference.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER

(OR BACK), THERE ARE NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

FOR SAFETY

DO NOT:

• Attempt to disassemble this unit or carry out repairs.

• Attempt to modify the unit in any way.

• Make sure that foreign objects do not get inside the unit.

• Place naked flame sources - such as lit candles on or near the unit.

• Place objects filled with liquids - such as vases, on or next to the unit.

• Cover the unit - allow the unit to be well ventilated.

• Drop the unit or subject it to strong shocks.

• Attempt to service this product yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

EN

1

Know Your Machine ......................................................................................... 3

Remote Control ................................................................................................ 6

Wall Mounting.................................................................................................... 8

Antenna Connection ......................................................................................... 10

Tuning Menu Options ...................................................................................... 11

Other Connections ............................................................................................ 13

Basic Operation ................................................................................................ 18

Menu Operation ................................................................................................ 22

Teletext .............................................................................................................. 32

Common Interface Module ............................................................................... 34

Troubleshooting ............................................................................................... 36

Specifications .................................................................................................. 37

CONTENTS

HD Ready Digital LCDTV User Manual

NOTE: This LCD cabinet drawing is a sample and may not depict

your actual LCD

cabinet design.

2

KNOW YOUR MACHINE

A

B

C

D

E

F

G

H

J

K

L

M

N

O

P

Q

R

S

T

U

V

X

Y

1 x Remote Control

POWER

VIDEO

SCART

TV

PC

Numerical Buttons

EPG

PRE PR

ASPECT

SOURCE

NICAM

SLEEP

PICTURE

PR LIST

SOUND

VOL

MUTE

PR

DISPLAY

MENU

EXIT

OK

Navigation Buttons

Green Button

Yellow Button

Blue Button

Red Button

MIX

TELETEXT

SIZE

SUBPAGE

INDEX

SUBTITLE

REVEL/Tick

HOLD/VIEW

A

B

C E

D

F

G

H

K

J

M

L

N

P

O

Q

R

S

T

U

V

Y

X

a

b

d

g

f

m

n

k

h

p

q

a

b

d

e

g

h

k

m

n

p

e

f

EN

3

KNOW YOUR MACHINE

B

D

F

G

H

J

M

N

O

P

C

E

Power LED

Wall Mount Hole

Volume Up

Volume Down

Channel Up

Channel Down

MENU Button

Source Button

Power Button

Common Interface Slot

Headphone Output

Audio Input

Video Input

S-Video Input

HDMI 2 Input

Antenna Input

SCART Input

PC Audio Input

SPDIF Output

Component Input

HDMI 1 Input

Power Connector

VGA Input

K

L

Q

R

S

T

A

U

V

X

Y

HD Ready Digital LCDTV User Manual

1 x LCD TV

Control Panel

Rear Connections

A

C

D

E

F

G

H

J

Y

B

V

X

4

KNOW YOUR MACHINEKNOW YOUR MACHINE

HD Ready Digital LCDTV User Manual

EN

1 x AC Power Cord

Z

2 x AAA Battery

a

Front View

Side Connections

Rear View

K

L

N

O

QS RT

U

M

V

P

5

2. Insert two new 1.5V size AAA

Batteries with the and marks

correctly aligned.

See fig. 2.

NOTE ON BATTERIES:

• Do not mix different types of

batteries or an old battery with

a new one.

• To prevent the risk of leakage

or explosions, never recharge

the batteries, apply heat or take

them apart.

• When not using batteries,

remove them to prevent battery

drain.

• If liquid leaks from the batteries,

throw them away. Thoroughly

clean the battery compartment

with a dry cloth.

REMOTE CONTROL

1. Unclip the Battery Cover from the

Remote Control.

See fig. 1.

REMOTE CONTROL

NOTES:

- Please read the important safety

instructions before use.

fig. 1

Battery

Compartment

Cover

fig. 2

HD Ready Digital LCDTV User Manual

6

3. Carefully close the Battery Cover.

See fig. 3.

REMOTE CONTROL

fig. 3

PRECAUTIONS:

To obtain the best performance

from your remote control, please

consider the following:

• Ensure there is no obstruction

between remote control and

TV set.

• Bright sunlight may affect the

remote control performance.

• Always ensure that both

batteries are replaced at the

same time.

HD Ready Digital LCDTV User Manual

EN

7

IMPORTANT: When drilling into

walls always check that there

are no hidden wires or pipes etc.

Make sure that the screws and

wall plugs supplied are suitable

for supporting the unit. Consult

a qualified tradesperson if you

are not sure.

NOTE: It would be useful to ask

someone to help you at this

stage.

WALL MOUNTING

NOTES:

- Please read the important safety

instructions before use.

1. Put the unit face down on a safe,

flat surface that is covered by a

smooth cloth.

See fig. 4 and 5.

Stand

fig. 4

Screws

WALL MOUNTING (Optional)

fig. 6

fig. 5

Stand

2. Unscrew the screws of the stand.

Then remove the Stand.

See fig. 4 - 6.

HD Ready Digital LCDTV User Manual

8

4. For the Wall Bracket - Refer to

the user instructions supplied

with the wall bracket (not

included).

See fig. 8.

3. Use 4 Wall Mount Holes B and

Screws (not included) to mount the

TV on the Bracket (not included).

See fig. 7.

WALL MOUNTING

fig. 7

fig. 8

TV Screen

Size (inches)

VESA-Compatible

Wall bracket

(W x H mm)

Screw Type

W

H

19"

22"

26"

100 x 100 mm

200 x 100 mm

Metric 4 x 10 mm

B

HD Ready Digital LCDTV User Manual

EN

9

NOTE: Make sure your local

voltage is 230V/240V~, 50Hz.

Z

Mains Socket

1. Connect the AC Power Cord Z

to the Power Connector X .

See fig. 9.

2. Connect the AC Power Cord Z

to the mains socket.

See fig. 9.

ANTENNA CONNECTION

Q

1. Connect the Antenna Plug to the

Antenna Input Q located at the

rear of the TV.

See fig. 9.

2. For optimum picture quality, adjust

the direction of the antenna.

3. To improve picture quality where

the signal is poor use a signal

amplifier (not included).

CONNECTING THE ANTENNA

Antenna Plug

fig. 9

X

WARNING:

- Switch off the TV before

connecting any external device.

AC POWER CORD CONNECTION

HD Ready Digital LCDTV User Manual

10

TUNING MENU OPTIONS

J

A

fig. 10

fig. 11

fig. 12

Thank you for your purchase of this TV.

Please proceed with the following steps to set-up your TV.

TURN ON THE LCD-TV

1. When the POWER J or A is

pressed the TV will turn on and the

Power LED A on the front of the

TV will change from red to blue

See fig. 10 and 11.

2. When the LCD-TV is turned off

using the POWER J or A , the

LCD-TV will go into standby mode

and the Power LED A will turn

red.

See fig. 10 and 11.

FIRST TIME INSTALLATION

1. This display will appear on the

screen when the TV is turned on

for the first time.

See fig. 12.

NOTE: If you can not find this

screen press MENU U . Then

use the Natvigation Keys Y to

select the TV menu.

See fig. 11.

2. Press the Green Button a to

proceed with the installation.

See fig. 11.

U

Y

a

HD Ready Digital LCDTV User Manual

EN

11

4. Use Navigation Keys Y to select

your country. Then press Green

Button a to continue or press

Yellow b to go back.

See fig. 13 and 15.

5. System searching may take few

minutes to complete.

See fig. 16.

6. A message will be displayed when

the search is complete. Press Red

Button e to finish system

searching. The LCD TV will

automatically display the first

channel found automatically.

See fig. 13.

TUNING MENU OPTIONS

fig. 13

fig. 14

fig. 15

fig. 16

Exit

System searching. Please wait...

Analog channels found: 0

Digital channels found: 0

3/3

3. Use Navigation Keys Y to select

your language. Then press Green

Button a to continue.

See fig. 13 and 14.

e

a

b

Y

TV Installation

Français

Italiano

Nederlands

Svenska

Dansk

Deutsch

Espanol

1/3

TV Installation

Gemary

Ireland

Czech Republic

Denmark

Finland

France

Austria

Belgium

HD Ready Digital LCDTV User Manual

12

WARNING:

- Switch off the TV before

connecting any external device.

OTHER CONNECTIONS

R

fig. 17

SCART1

SCART Lead

fig. 18

SCART INPUT

1. Plug the scart lead from the

external device into TV SCART

Socket R .

See fig. 17.

2. SCART 1 - Full SCART, which

transmits RGB, S-Video and CVBS

in and CVBS tuner out (Analog).

3. Press SCART C or SOURCE K

to select the SCART.

See fig. 18.

- To connect external devices

such as DVD players, set top

boxes or games consoles.

C

K

HD Ready Digital LCDTV User Manual

EN

13

OTHER CONNECTIONS

U

fig. 19

Audio Cables

fig. 20

YPbPr INPUT

3. Turn on the power of the LCD-TV

first and then turn on the power

of the AV device.

2. Connect the (Y, Pb, Pr) cables

and audio cables to the

Component and Audio Input

on

the TV.

See fig. 19.

1. Make sure that the power of the

LCD-TV and the AV device are

off.

- For connecting devices such as

video cameras.

K

YPr Pb

4. Press VIDEO B or SOURCE K

to select the YPbPr input.

See fig. 20.

B

HD Ready Digital LCDTV User Manual

14

U

VGA INPUT

OTHER CONNECTIONS

Y

fig. 21

SV

fig. 22

- You can use your LCD-TV as a

monitor for your personal computer.

1. Connect the D type 15-pin VGA

interface cable (not supplied) to

VGA Input Y on the LCD-TV.

See fig. 21.

2. Connect the audio cable (not

supplied) to Audio Input S on the

back of the LCD-TV (if necessary).

See fig. 21.

3. Press PC E or SOURCE K to

select the PC input.

See fig. 22.

1. Connect the cable from the HDMI

devices to the TV HDMI Input V .

See fig. 21.

2. Press VIDEO B or SOURCE K

to select the HDMI input.

See fig. 22.

3. Operate the corresponding external

equipment. (Refer to external

equipment operating guide.)

HDMI 1 INPUT

CAUTION: You must ensure both

devices are switched off before

connection.

to PC

K

B E

HDMI

Cable

HD Ready Digital LCDTV User Manual

EN

15

OTHER CONNECTIONS

O

fig. 23

fig. 24

M

N

AV INPUT

- For connecting an AV device.

1. Make sure that the power of the

LCD-TV and the AV device are off.

2. Connect the cables from the

AV device's output jacks to the

Audio

Input M .

See fig. 23.

3. Connect the cables from the

AV device's output jacks to the

Video

Input N .

See fig. 23.

turn on the AV device.

B or SOURCE K

to select the AV input.

See fig. 24.

K

B

S-Video Cable

S-VIDEO INPUT

- For connecting video recorders.

1. Make sure that the power of the

LCD-TV and the AV device are off.

2. Connect the audio and S-Video

cables from the VCR's output jacks

to the S-Video Input O and Audio

Input .

See fig. 23.

3. Turn on the LCD-TV first and then

turn on the VCR.

4. Press VIDEO B or SOURCE K

to select the S-VIDEO input.

See fig. 24.

N

video

audio

HD Ready Digital LCDTV User Manual

16

4. Turn on the LCD-TV first ; and then

5. Press VIDEO

OTHER CONNECTIONS

L

fig. 25

K

COMMON INTERFACE SLOT

HEADPHONE OUTPUT

1. Connect a set of stereo

headphones (not included) to the

Headphone Output L for private

listening. When headphones are

in use, the speakers will be

automatically disconnected.

See fig. 25.

IMPORTANT: When using

headphones always set the

volume control to a low level

before you put the headphones

on, then put the headphones

on and gradually increase the

volume to a comfortable

listening level.

P

HDMI 2 INPUT

- You can use a Conditional Access

Module (CAM) card to view Pay

TV.

1. Insert the CAM card (not included)

in Common Interface Slot K .

See fig. 25.

2. Please refer to the COMMON

INTERFACE section for more

detailed information.

- Same as HDMI 1.

HD Ready Digital LCDTV User Manual

EN

17

NICAM

1. Press NICAM L to select MONO,

STEREO, DUAL 1 and DUAL 2

for ATV channel. Select Audio

language for DTV channel.

See fig. 26.

BASIC OPERATION

fig. 26

AUDIO CONTROL

1. Press VOL+ Q to increase the

volume or VOL- Q to decrease

the volume. A number will

appear on screen indicating the

volume level.

See fig. 26.

MUTE

1. Press MUTE R to mute the

sound. A mute icon will appear

on the screen.

See fig. 26.

2. Press MUTE R again or

VOL+/VOL-to restore the sound.

The mute icon will disappear.

See fig. 26.

A

SELECT SOURCE

1. Press POWER A to turn on the

LCD-TV. Then press TV D , PC

E , SCART C , VIDEO B or

SOURCE K to select the source.

See fig. 26.

D

E

B

C

K

Q

R

L

HD Ready Digital LCDTV User Manual

18

La page charge ...

Haier LT26M1C Manuel utilisateur

Ce manuel convient également à

Haier LT26M1C Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents