Sony Personal Computer PCV-L640 Manuel utilisateur

VAIO Slimtop™ LCD

Computer User Guide

PCV-L640

VAIO Slimtop™ LCD Computer User Guide

2

NOTICE

whole or in part without written permission is

the software described herein, in whole or in

part, may not be reproduced, translated, or

reduced to any machine-readable form without

prior written approval.

SONY ELECTRONICS INC. PROVIDES NO

WARRANTY WITH REGARD TO THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN AND

HEREBY EXPRESSLY DISCLAIMS ANY

IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR

ANY PARTICULAR PURPOSE WITH

REGARD TO THIS MANUAL, THE

SOFTWARE, OR SUCH OTHER

INFORMATION. IN NO EVENT SHALL

SONY ELECTRONICS INC. BE LIABLE

FOR ANY INCIDENTAL,

CONSEQUENTIAL, OR SPECIAL

DAMAGES, WHETHER BASED ON TORT,

CONTRACT, OR OTHERWISE, ARISING

OUT OF OR IN CONNECTION WITH THIS

MANUAL, THE SOFTWARE, OR OTHER

INFORMATION CONTAINED HEREIN OR

THE USE THEREOF.

Sony Electronics Inc. reserves the right to make

any modification to this manual or the

information contained herein at any time

without notice. The software described herein is

governed by the terms of a separate user license

agreement.

This product contains software owned by Sony

and licensed by third parties. Use of such

software is subject to the terms and conditions

of license agreements enclosed with this

product. Some of the software may not be

transported or used outside the United States.

Software specifications are subject to change

without notice and may not necessarily be

identical to current retail versions.

Updates and additions to software may require

an additional charge. Subscriptions to online

service providers may require a fee and credit

card information. Financial services may

require prior arrangements with participating

financial institutions.

Sony, VAIO, the VAIO logo, VAIO Smart,

VAIO Digital Studio, Media Park, DVgate,

Media Bar, Handycam, Mavica, PictureGear

and i.LINK are trademarks of Sony. Intel,

Pentium, and Celeron are trademarks of Intel

Corporation. Microsoft, Windows, and the

Windows 98 logo are registered trademarks of

Microsoft Corporation.

This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of this

copyright protection technology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

All other trademarks are trademarks or

registered trademarks of their respective

owners.

Owner’s Record

The model number and serial number are

located on the back of your Sony VAIO

computer. Record the serial number in the space

provided here. Refer to the model and serial

numbers when you call your Sony Service

Center.

Model Number: PCV-L640

Serial Number:______________________

3

Safety Information and

Caution

To prevent fire or shock hazard,

do not expose your desktop to

rain or moisture.To avoid

electrical shock, do not open the

cabinet. Refer servicing to

qualified personnel only.

Never install modem or telephone

wiring during a lightning storm.

Never install telephone jacks in

wet locations unless the jack is

specifically designed for wet

locations.

Never touch uninsulated

telephone wire or terminals

unless the telephone line has been

disconnected at the network

interface.

Use caution when installing or

modifying telephone lines.

Avoid using the modem during an

electrical storm.

Do not use the modem or a

telephone to report a gas leak in

the vicinity of the leak.

The socket outlet shall be

installed near the equipment and

shall be easily accessible.

CDRW Laser diode properties

Laser output

1.8mW(Read)

21mW (Write)

Wave Length

773–797nm

780–795nm

(UJDA320)

! To change the backup battery,

please contact your nearest Sony

Service Center.

! Caution - The use of optical

instruments with this product

will increase eye hazard. As the

laser beam used in this product

is harmful to the eyes, do not

attempt to disassemble the drive

cabinet. Refer servicing to

qualified personnel only.

! Danger - Visible and invisible

laser radiation when open. Avoid

direct exposure to beam.

! For CD-RW: Danger - Invisible

laser radiation when open. Avoid

direct exposure to beam.

! Caution: For ADSL modem

models, to reduce the risk of fire,

use only No. 26 AWG or larger

telecommunication line cord.

! Pour changer la pile de

rechange, veuillez contacter

votre centre de service Sony le

plus près.

VAIO Slimtop™ LCD Computer User Guide

4

Pour prévenir tout risque d’incendie ou

d’électrocution, garder cet appareil à

l’abri de la pluie et de l’humidité.

Pour prévenir tout risque d’électrocution,

ne pas ouvrir le châssis de cet appareil et

ne confier son entretien qu’à une personne

qualifiée.

Ne jamais effectuer l’installation de fil

modem ou téléphone durant un orage

électrique.

Ne jamais effectuer l’installation d’une

prise téléphonique dans un endroit

mouillé à moins que la prise soit conçue à

cet effet.

Ne jamais toucher un fil téléphonique à

découvert ou un terminal à moins que la

ligne téléphonique n’ait été débranché de

l’interface réseau.

Soyez très prudent lorsque vous installez

ou modifiez les lignes téléphoniques.

Évitez d’utiliser le modem durant un

orage électrique.

N'utilisez pas le modem ni le téléphone

pour prévenir d'une fuite de gaz vous êtes

près de la fuite.

L’appareil doit être le plus près possible

d’une prise murale pour en faciliter

l’accès.

For questions regarding your product or for the

Sony Service Center nearest you, call 1-888-

476-6972 in the United States or 1-800-961-

7669 in Canada.

Sony Customer Support can be reached at

www.sony.com.pcsupport

! Avertissement - L'utilisation

d'instruments optiques avec ce

produit augmente les risques

pour les yeux. Puisque le

faisceau laser utilisé dans ce

produit est dommageable pour

les yeux, ne tentez pas de

désassembler le boîtier.

Adressez-vous à un agent de

service qualifié.

! Danger : Radiation laser visible

et invisible si ouvert. Évitez

l’exposition directe au faisceau.

! Pour les CD-RW : Danger :

Radiation laser visible et

invisible si ouvert. Évitez

l'exposition directe au faisceau.

! Attention : Pour ADSL modele

modem, afin de réduire les

risques d'incendie, n'utilisez

qu'un cordon de communication

N0. 26 AWG ou plus gros.

5

Regulatory Information

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the Rules. These

limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in

accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

Reorient or relocate the receiving

antenna.

Increase the separation between

the equipment and the receiver.

Connect the equipment into an

outlet on a circuit different from

that to which the receiver is

connected.

Consult the dealer or an

experienced radio/TV technician

for help.

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Only peripherals (computer input/output

devices, terminals, printers, etc.) that comply

with FCC Class B limits may be attached to this

computer product. Operation with

noncompliant peripherals is likely to result in

interference to radio and television reception.

All cables used to connect peripherals must be

shielded and grounded. Operation with cables,

connected to peripherals, that are not shielded

and grounded, may result in interference to

radio and television reception.

FCC Part 68

This equipment complies with Part 68 of the

FCC rules. The FCC Ringer Equivalence

Number (REN) for this equipment is 0.7. If

requested, this information must be provided to

the telephone company.

This modem uses the USOC RJ-11 telephone

jack.

The REN is used to determine the quantity of

devices which may be connected to the

Declaration of Conformity

Trade Name: SONY

Model No.: PCV-L640

Responsible

Party:

Sony Electronics Inc.

Address: 1 Sony Drive

Park Ridge, NJ 07656

Telephone: 201-930-6972

This phone number is for FCC-related

matters only.

This device complies with Part 15 of the

FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

VAIO Slimtop™ LCD Computer User Guide

6

telephone line. Excessive RENs on the

telephone line may result in the devices not

ringing in response to an incoming call. In

most, but not all areas, the sum of the RENs

should not exceed five (5.0). To be certain of

the number of devices that may be connected to

the line, as determined by the total RENs,

contact the telephone company to determine the

maximum REN for the calling area.

If the terminal equipment causes harm to the

telephone network, the telephone company will

notify you in advance that temporary

discontinuance of service may be required. But

if advance notice is not practical, the telephone

company will notify the customer as soon as

possible. Also, you will be advised of your right

to file a complaint with the FCC if you believe

it is necessary.

The telephone company may make changes in

its facilities, equipment, operations or

procedures that could affect the operations of

the equipment. If this happens, the telephone

company will provide advance notice in order

for you to make the necessary modifications in

order to maintain uninterrupted service.

If trouble is experienced with this modem, for

repair or warranty information, please contact

1-888-4SONY-PC, or write to the Sony

Customer Information Center, 12451 Gateway

Blvd., Fort Myers, FL 33913. If the trouble is

causing harm to the telephone network, the

telephone company may request that you

remove the equipment from the network until

the problem is resolved.

Repair of this equipment should be made only

by a Sony Service Center or Sony authorized

agent. For the Sony Service Center nearest you,

call 1-888-4SONYPC (1-888-476-6972).

This equipment cannot be used on public coin

service provided by the telephone company.

Connection to Party Line Service is subject to

state and possible provincial tariffs. (Contact

the state or provincial utility service

commission, public service commission, or

corporation commission for information.)

Telephone Consumer

Protection Act of 1991

(United States)

The Telephone Consumer Protection Act of

1991 makes it unlawful for any person to use a

computer or other electronic device to send any

message via a telephone facsimile machine

unless such message clearly contains, in a

margin at the top or bottom of each transmitted

page or on the first page of the transmission, the

date and time it is sent and an identification of

the business, other entity, or individual sending

the message, and the telephone number of the

sending machine or such business, other entity,

or individual.

In order to program this information into your

facsimile machine, see your fax software

documentation.

Telephone Consumer

Guidelines (Canada)

Please refer to your telephone directory under

‘Privacy Issues’ and/or ‘Terms of Service.’ For

more detailed information, please contact:

CRTC

Terrasses de la Chaudiére, Tour centrale

1 promenade du Portage, 5 étage Hull PQ K1A

0N2.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet àppareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

7

DISPOSAL OF LITHIUM ION

BATTERY

You can return your unwanted lithium ion

batteries to your nearest Sony Service Center or

Factory Service Center.

For the Sony Service Center nearest you, call 1-

888-476-6972 in the United States or 1-800-

961-7669 in Canada.

INDUSTRY CANADA NOTICE

NOTICE: The Industry Canada label identifies

certified equipment. This certification means

that the equipment meets certain

telecommunications network protective,

operational and safety requirements as

prescribed in the appropriate Terminal

Equipment Technical Requirements

document(s). The Department does not

guarantee the equipment will operate to the

userís satisfaction.

Before installing this equipment, users should

ensure that it is permissible to be connected to

the facilities of the local telecommunications

company. The equipment must also be installed

using an acceptable method of connection.

The customer should be aware that compliance

with the above conditions may not prevent

degradation of service in some situations.

In some areas the disposal of lithium

ion batteries in household or

business trash may be prohibited.

! Do not handle damaged or

leaking lithium ion batteries.

! Ne pas manipuler les batteries

au lithium-ion qui fuient ou sont

endommagées.

! Danger of explosion if battery is

incorrectly replaced. Replace

only with the same or equivalent

type recommended by the

manufacturer. Discard used

batteries according to the

manufacturer’s instructions.

! Une batterie non conforme

présente un danger d'explosion.

La remplacer seulement par une

batterie identique ou de type

équivalent recommandé par le

fabricant. Évacuer les batteries

usées selon les directives du

fabricant.

! The battery pack used in this

device may present a fire or

chemical burn hazard if

mistreated. Do not disassemble,

heat above 212°F (100°C) or

incinerate.

Dispose of used battery

promptly.

Keep away from children.

! La manutention incorrecte du

module de batterie de cet

appareil présente un risque

d'incendie ou de brûlures

chimiques. Ne pas démonter,

incinérer ou exposer à une

température de plus de 100°C.

Évacuer promptement la batterie

usée. Garder hors de portée des

enfants.

VAIO Slimtop™ LCD Computer User Guide

8

Repairs to certified equipment should be

coordinated by a representative designated by

the supplier. Equipment malfunctions or any

repairs or alterations made by the user to this

equipment may give the telecommunications

company cause to request that the user

disconnect the equipment.

Users should ensure for their own protection

that the electrical ground connections of the

power utility, telephone lines and internal

metallic water pipe system, if present, are

connected together. This precaution may be

particularly important in rural areas.

CAUTION: Users should not attempt to make

such connections themselves, but should

contact the appropriate electrical inspection

authority, or electrician, as appropriate.

NOTICE: The Ringer Equivalence Number

(REN) assigned to each terminal device

provides an indication of the maximum number

of terminals allowed to be connected to a

telephone interface. The termination on an

interface may consist of any combination of

devices subject only to the requirement that the

sum of the Ringer Equivalence Numbers of all

the devices does not exceed 5. The Ringer

Equivalence Number for this equipment is 0.7.

AVIS DE L’INDUSTRIE

CANADA

AVIS: L’étiquette d’Industrie Canada identifie

le matériel homologué.

Cette étiquette certifie que le matériel est

conforme aux normes de protection,

d’exploitation et de sécurité des réseaux de

télécommunications, comme le prescrivent les

documents concernant les exigences techniques

relatives au matériel terminal. Le Ministère

n’assure toutefois pas que le matériel

fonctionnera à la satisfaction de l’utilisateur.

Avant d’installer ce matériel, l’utilisateur doit

s’assurer qu’il est permis de le raccorder aux

installations de l’entreprise locale de

télécommunication. Le matériel doit également

être installé en suivant une méthode acceptée de

raccordement. L’abonné ne doit pas oublier

qu’il est possible que la conformité aux

conditions énoncées ci-dessus n’empêche pas la

dégradation du service dans certaines situations.

Les réparations de matériel homologué doivent

être coordonnées par un représentant désigné

par le fournisseur. L’entreprise de

télécommunications peut demander à

l’utilisateur de débrancher un appareil à la suite

de réparations ou de modifications effectuées

par l’utilisateur ou à cause de mauvais

fonctionnement.

Pour sa propre protection, l’utilisateur doit

s’assurer que tous les fils de mise à la terre de la

source d’énergie électrique, des lignes

téléphoniques et des canalisations d’eau

métalliques, s’il y en a, sont raccordés

ensemble. Cette précaution est particulièrement

importante dans les régions rurales.

Avertissement: L’utilisateur ne doit pas tenter

de faire ces raccordements lui-même; il doit

avoir recours à un service d’inspection des

installations électriques, ou à un électricien,

selon le cas.

AVIS: L’indice d’équivalence de la sonnerie

(IES) assigné à chaque dispositif terminal

indique le nombre maximal de terminaux qui

peuvent être raccordés à une interface.

La terminaison d’une interface téléphonique

peut consister en une combination de quelques

dispositifs, à la seule condition que la somme

d’indices d’équivalence de la sonnerie de tous

les dispositifs n’excède pas 5. L’indice

d’équivalence de la sonnerie de ce matériel est

de 0.7.

9

Contents

Welcome ....................................................12

Choosing an Ergonomic Location ............................12

Front Panel Overview ...............................................14

Back Panel Overview ...............................................16

LCD Overview .........................................................18

Using a Headphone or Microphone .........................20

VAIO Action Setup ...................................21

Pre-setting i.LINK devices .......................................21

Changing the Window Design of Sony Software ....22

Programmable Power Keys ......................................22

Internal Timer ...........................................................23

AutoAlert E-mail Notification System .....................23

AutoAlert E-mail Software Restrictions ...........................24

Using the Wheel Mouse ...........................................24

Using the Memory Stick Media and VisualFlow .....25

VisualFlow ........................................................................27

Using PC Cards ........................................................28

VAIO Slimtop™ LCD Computer User Guide

10

1010

10

Sony Digital Media Park Applications

Sony Digital Media Park Applications Sony Digital Media Park Applications

Sony Digital Media Park Applications ........

................

........30

3030

30

Movie Shaker ........................................................... 31

Importing Images and Sound Clips .................................. 31

Create a Movie using Shaker ........................................... 31

Editing Clips and Scenes .................................................. 32

Saving a Movie ................................................................ 33

Using Digital Video ................................................. 34

Connecting a Digital Video Recorder .............................. 34

Using DVgate ................................................................... 34

Hard Drive Partition ................................................. 35

Defragmenting your Hard Disk Drive ..................... 36

i.LINK (IEEE1394) Compatibility .......................... 36

Enabling Smart Connect .......................................... 38

Enabling Ethernet .................................................... 39

System and Application Recovery CD(s)

System and Application Recovery CD(s) System and Application Recovery CD(s)

System and Application Recovery CD(s) ...

......

...40

4040

40

Using the System Recovery CD(s) .......................... 40

Using the Application Recovery CD(s) ................... 42

11

1111

11

Troubleshooting

Troubleshooting Troubleshooting

Troubleshooting ..........................................

....................................................................................

..........................................43

4343

43

To Reach Sony ..................................................................53

Notes on Use ............................................................53

On the Power Source ........................................................53

On Disposal of the Lithium Battery ..................................55

On Handling ......................................................................55

On Installation ...................................................................55

On Moisture Condensation ...............................................56

On Upgrading the System .................................................56

On Handling an LCD Display ..........................................57

On Handling a CRT Display .............................................58

On Using the Hard Disk Drive .........................................58

On Handling Diskettes ......................................................58

On Handling CD Media ....................................................58

On Cleaning CD Media ....................................................58

Resources .................................................................59

For Answers to Your Software Questions ................60

Sony Service Center ..........................................................60

Specifications ...........................................................63

Index

Index Index

Index ...........................................................

......................................................................................................................

...........................................................66

6666

66

VAIO Slimtop™ LCD Computer User Guide

12

Welcome

Thank you for purchasing your Sony VAIO

®

computer! Your new computer is a

superb blend of high technology and easy-to-use functionality. This User Guide

contains information about the applications included with your system, contact

information for software vendors, and the specifications for your computer.

Choosing an Ergonomic Location

Before you get started, find the best location for your new computer. Here are

some things to consider when planning your workspace:

Stable work surface — Use a stable work surface large enough to support

the computer and other equipment.

Ventilation — Leave at least eight inches of space on the left and back sides

of your computer to enable proper ventilation.

Placement of the keyboard, mouse, and other input devices — Place

your keyboard, mouse, and other input devices so that your arms and hands

are in a relaxed, comfortable position. The keyboard should be directly in

front of you. Adjust the level of the keyboard so that your lower arms are

parallel to the floor. Keep your wrists in a relaxed position when you are

using the keyboard—not angled up or down. Use the palmrest only briefly,

for resting. While typing, never use the palmrest or rest your hands on the

table. Position the mouse at the same level as the keyboard. Hold the mouse

with a relaxed hand, and use your whole arm to move it. Take breaks during

sessions with your computer. Excessive use of the mouse or a joystick may

strain muscles or tendons.

Furniture and posture — Sit in a chair with good back support and

armrests. Adjust the level of the chair so your feet are flat on the floor. A

footrest may make you more comfortable. Sit in a relaxed, upright posture—

avoid slouching forward or leaning far backward.

Viewing angle of the display — Position the display 18 to 26 inches

directly in front of you, with the top of the screen at or a little below eye

level. Use the display’s tilting feature to find the best position. You can

reduce eye strain and muscle fatigue by placing the display in the proper

position.

Choosing an Ergonomic Location

13

Lighting — Choose a location where windows and lights do not create glare

and reflection on the display. Use indirect lighting to avoid bright spots on

the display. You can also purchase accessories for your display that help

reduce glare. Proper lighting adds to your comfort and work effectiveness.

VAIO Slimtop™ LCD Computer User Guide

14

Front Panel Overview

The front panel of your VAIO Slimtop Computer allows for access to the diskette

and CD-RW drive. It also includes USB and i.LINK

®

ports to connect USB

devices, digital equipment, or other components.

Locating Controls and Connectors

Slimtop Front Panel

1 Power switch and indicator light

Turns on/off the computer and the display.

The indicator light is green while the power is on and amber when the

computer is in standby mode.

2 Floppy disk drive

Reads/writes data from/to a 3.5-inch floppy disk.

3 Floppy disk eject button

Ejects the floppy disk.

4CD-RW drive

Reads data from a CD-RW/CD-R/CD-ROM.

5 Manual eject hole

If the CD does not come out when you press the CD-RW eject button, insert

a thin, pointed object into this hole to eject the disc manually.

6 CD-RW eject button

Ejects a CD.

FD DISC HD

Front Panel Overview

15

Slimtop Front Panel (cont’t)

7 FD (Floppy disk drive) access indicator light

Lights in green while reading/writing data from/to a floppy disk.

8 Disc (CD-RW drive) access indicator light

Lights in amber while reading data from a CD-RW/CD-R/CD-ROM.

9 HD (drive) access indicator light

Lights in green while reading/writing data from/to the hard disk.

10 MIC (Microphone) connector*

Connects a microphone (not supplied).

11 PHONES (Headphones) connector*

Connects headphones (not supplied).

12 VOLUME control

Adjusts the volume of the headphones connected to the PHONES connector.

Users should note that this does not control the volume of the integrated LCD

speakers.

13 PC CARD slot

A PC Card (also called a PCMCIA card) can be installed in this slot. PC cards

enable you to add functionality to your system.

FD DISC HD

VAIO Slimtop™ LCD Computer User Guide

16

*See “Using a Headphone or Microphone” for important information about connecting a microphone

and headphone.

Back Panel Overview

The back panel of your computer contains the connectors where you plug in

supplied and optional accessories. The icons on the back panel serve as a map to

help you locate the connectors on your computer.

Locating Controls and Connectors

Slimtop Rear Panel

14 MEMORY STICK media slot

Insert a Sony Memory Stick

®

card into this slot.

15 i.LINK (4-pin)

Connects a digital device such as a Sony Digital Handycam

®

Camcorder.

16 USB (Universal Serial Bus) connector

Connects a USB device.

1 AC INPUT connector

Connects the supplied power cord.

PRINTER SERIAL MONITOR

USB LINE

I.LINK S400

KEYBOARD

OUTIN

LIN E PHONE

I.LINK S400

LCD

PRINTER SERIAL MONITOR

USB LINE

LCD KEYBOARD

OUTIN

Back Panel Overview

17

2 LINE jack

Connects a phone cable to the wall jack.

3 ETHERNET connector

10Base-T/100Base-TX Fast Ethernet interface.

! The connector marked with (Network) is for LAN.

4 TELEPHONE jack

Connects the phone to the computer.

5 PRINTER connector

Connects a parallel device, such as a printer or scanner.

6 SERIAL connector

Connects a serial device, such as a digital still camera.

7 MONITOR connector

Connects a standard CRT display.

8 USB (Universal Serial Bus) connector

Connects a USB device.

9 LINE IN connector

Connects an audio device.

10 LINE OUT connector

Connects an audio device or an active speaker.

11 i.LINK (6-pin)

Connects a digital device such as a Sony Digital Handycam

®

Camcorder.

12 LCD MONITOR connector

Connects the LCD that comes with the VAIO Slimtop LCD computer.

Note: Do not connect any display to this connector other than the LCD that is

supplied with this system.

13 KEYBOARD connector

Connects a keyboard.

VAIO Slimtop™ LCD Computer User Guide

18

LCD Overview

Your VAIO Slimtop Computer comes with an LCD monitor, saving valuable

desktop space.

LCD

1 Power indicator light

Light is green while the power is on. When the computer enters the standby

mode, this indicator light turns amber.

2 Information LED

Light turns red to alert the user to activities, such as the arrival of e-mail. See

“AutoAlert E-mail Notification System.”

3 Brightness control

Adjusts the brightness of the screen.

4 Volume control

Adjusts the volume of the integrated speakers on the LCD display.

LCD Overview

19

To adjust the height and viewing angle of the display

1 Holding both sides of the display, push the display panel out and up.

2 Set the display height so that it does not touch the keyboard, and adjust the

viewing angle approximately 27 degrees from eye level to the center of the

screen.

The LCD display is designed to maintain the best ergonomic viewing angle.

VAIO Slimtop™ LCD Computer User Guide

20

Using a Headphone or Microphone

When you connect a microphone or headphone to your computer, attaching a

ferrite core will reduce electrical interference.

1 Attach the (supplied) ferrite core at the end of the headphone or microphone

cable closest to the computer.

2 Wrap the cable through the center of the ferrite core.

The following illustration shows how to attach the ferrite core when you are using

both a headphone and a microphone.

The LCD and keyboard cables already include a ferrite core. Do not remove the

ferrite core from these cables.

Plugs connected to

Microphone and

Ferrite core

the computer

headphone cables

La page charge ...

Sony Personal Computer PCV-L640 Manuel utilisateur

Ce manuel convient également à

Sony Personal Computer PCV-L640 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents