Panasonic CT34WX50 Manuel utilisateur

Wide Screen TV

Operating Instructions

Model No.

English

TQBC0213-2

CT-34WX50

For assistance, please call : 1-888-VIEW-PTV(843-9788)

or send e-mail to : [email protected]

or visit us at www.panasonic.co.jp/global/ (U.S.A)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

MBS0100S0(MS) 1

MBS0100S1020(MS)

MBS0100S2020(MS)

2

WARNING: To reduce the risk of electric shock do not remove cover or back. No

user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with

arrow-head within a triangle

is intended to tell the user

that parts inside the product

are a risk of electric shock to

persons.

The exclamation point within

a triangle is intended to tell

the user that important

operating and servicing

instructions are in the papers

with the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to

qualified service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin

grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including

on shelves above, etc.)

3

Important Safety Instructions

1) Read these instructions.

All the safety and operating instructions should be read before the appliance is operated.

2) Keep these instructions.

The safety and operating instructions should be retained for future reference.

3) Heed all warnings.

All warnings on the appliance and in the operating instructions should be adhered to.

4) Follow all instructions.

All operating and use instructions should be followed.

5) Do not use this apparatus near water.

For example, near a bathtub, wash bowl, kitchen sink, or laundry tube, in a wet basement, or near a swimming pool,

and the like.

6) Clean only with dry cloth.

Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

7) Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to

protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other

similar surface.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid

injury from tip-over.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination

to overturn.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

This will prevent damage to the product due to Lightning and power-line surges.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally. or has been dropped.

CAUTION : This TV set for use only with TV-stand. (Model: TY-S34WX50) Use with other stand is capable of resulting

in stability causing possible injury.

4

AVERTISSEMENT: Pour réduire les risques de secousse électrique, ne pas retirer le

couvercle ni le panneau arrière. Cet appareil ne contient aucune pièce qui puisse être

réparée par l'utilisateur; l'entretien doit être effectué par du personnel qualifié.

Le symbole de l'éclair, inscrit dans un

triangle équilatéral, a pour objet

d'appeler l'attention de l'utilisateur sur la

présence, à l'intérieur du produit, de

pièces non isolées portées à une

"tension dangereuse" qui peut avoir une

amplitude suffisante pour provoquer une

secousse électrique.

Le symbole du point d'exclamation,

inscrit dans un triangle équilatéral, a pour

objet d'appeler l'attention de l'utilisateur

sur la présence, dans la documentation

accompagnant le produit, d'importantes

instructions concernant son mode

opératoire et son entretien.

AVERTISSEMENT

Risque de secousse électrique

Ne pas ouvrir

AVERTISSEMENT: Pour éviter tout dommage pouvant entraîner un incendie ou une secousse électrique,

n'exposez pas l'appareil à la pluie ou à l'humidité.

Ne placez aucun récipient contenant de l’eau (vase de fleur, tasse, bouteille de produit

de beauté, etc.) sur l’appareil (ou sur une étagère le dominant).

AVERTISSEMENTS:1) Pour réduire les risques de secousse électrique, ne pas retirer le couvercle. Cet appareil ne

contient aucune pièce qui puisse être réparée par l'utilisateur; l'entretien doit être effectué par

du personnel qualifié.

2) Ne supprimez pas la broche de mise à la terre de la fiche du cordon d'alimentation. Cet

appareil est équipé d'une fiche à 3 broches qui ne peut être introduite que dans une prise

secteur dont la troisième broche est reliée à la terre. Cette disposition concerne la sécurité.

Si la fiche ne pénètre pas complètement dans la prise, consultez un électricien qui remplacera

la prise ou la fiche hors norme.

Ne tentez pas de contourner la sécurité de la fiche avec broche de mise à la terre.

5

Précautions de sécurité importantes

1) Lisez ces instructions.

Lisez toutes les instructions de sécurité et de fonctionnement avant d’utiliser l’appareil.

2) Conservez ces instructions.

Les instructions de sécurité et de fonctionnement doivent être conservées à titre d’information.

3) Prenez en compte tous les avertissements.

Tous les avertissements marqués sur l’appareil ou dans le mode d’emploi doivent être pris en compte.

4) Suivez toutes les instructions.

Toutes les instructions de fonctionnement et d’utilisation doivent être suivies.

5) N’utilisez pas cet appareil près de l’eau.

Par exemple, près d’une baignoire, d’un lavabo, d’un évier, d’une machine à laver, dans un sous-sol humide, près

d’une piscine, etc.

6) Nettoyez l’appareil uniquement avec un chiffon sec.

N’utilisez pas des nettoyants liquides ou aérosols. Pour le nettoyage, utilisez un chiffon sec.

7) Ne bloquez pas les orifices de ventilation. Installez l’appareil en suivant les instructions du fabricant. Les fentes et les orifices

du boîtier servent à la ventilation, aident au bon fonctionnement de l’appareil et le protègent des échauffements anormaux.

Ces orifices ne doivent jamais être bloqués en plaçant l’appareil sur un lit, un canapé, un tapis ou une autre surface similaire.

8) N’installez pas l’appareil près d’une source de chaleur telle qu’un radiateur, une chaudière, un poêle ou un autre appareil

(y compris les amplificateurs) produisant de la chaleur.

Cet appareil ne doit pas être placé à l’intérieur d’un meuble tel qu’une bibliothèque ou un bâti électronique sauf si une

ventilation suffisante peut être assurée ou que les instructions du fabricant sont respectées.

9) N’invalidez pas les caractéristiques de sécurité de la fiche polarisée ou avec mise à la terre. Une fiche polarisée possède

deux broches, une plus large que l’autre. Une fiche avec mise à la terre possède deux broches et une troisième broche de

mise à la terre. La lame large et la troisième broche de mise à la terre ont été faites pour des raisons de sécurité. Si la broche

de la fiche ne se branche pas dans la prise, consultez un électricien pour faire remplacer la prise.

10) Protégez le cordon d’alimentation et empêchez qu’il soit piétiné, ou pincé, particulièrement au niveau de la prise

secteur murale et de la sortie de l’appareil.

11) Utilisez uniquement des dispositifs auxiliaires/accessoires spécifiés par le fabricant.

12) Utilisez uniquement un chariot, socle, trépied, support ou table spécifié par le fabricant ou vendu

avec l’appareil. Si vous utilisez un chariot, faites attention lors du déplacement du chariot avec

l’appareil qu’il ne tombe et ne vous blesse pas.

Un arrêt brusque, une force excessive et une surface inégale peuvent causer le renversement de

l’ensemble.

13) Débranchez l’appareil pendant un orage ou lorsqu’il ne doit pas être utilisé pendant une période prolongée.

Cela évitera qu’il soit endommagé pendant un orage ou par une surtension.

14) Pour toute réparation, consultez une personne qualifiée. L’appareil doit être réparé s’il a été endommagé de n’importe

quelle façon, comme quand, par exemple, le cordon ou la fiche d’alimentation est endommagé, un liquide ou un objet

a pénétré à l’intérieur de l’appareil, l’appareil a été exposé à la pluie ou l’humidité, ne fonctionne pas normalement ou

est tombé.

AVIS : Ce téléviseur doit être utilisé uniquement avec le meuble de téléviseur (modèle: TY-S34WX50). L’utilisation

d’un autre modèle peut rendre l’ensemble instable et être cause de blessures.

6

Note:

This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these

materials may be regulated in your community due to environmental considerations. For disposal or recycling information

please contact your local authorities, or the Electronics Industries Alliance: <http:// www.eiae.org.>

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment

from your new color television set.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments,

and retain them for future reference.

Retain your purchase receipt also, and note down the model number and serial number of your set in

the space provided on the back cover of these instructions.

Visit our Panasonic Web Site for USA : www.panasonic.com

for canada : www.panasonic.ca

FCC CAUTION:

Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this monitor not expressly approved by

Matsushita Electric Corporation of America could result in harmful interference and would void the user’s authority to

operate this device.

For assistance, please call : 1-888-VIEW-PTV(843-9788)

or send e-mail to : [email protected]

or visit us at www.panasonic.co.jp/global/ (U.S.A)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

For assistance, please call : 1-800-561-5505

or visit us at www.panasonic.ca (Canada)

7

Table of Contents

Important Safety Instructions .......................................2

Installation ......................................................................8

Receiver Location .........................................................8

Optional External Equipment ........................................8

AC Power Supply Cord .................................................8

Safety Precaution..........................................................8

Remote Control Battery Installation ..............................9

Connecting the Antenna Cable to the RF In Terminal....

10

Antenna / Cable Connection .......................................11

How to connect the “1, 2, 3, 4” input terminals ...........13

How to connect the COMPONENT VIDEO Input Terminals ....

14

How to connect the AV Prog. Out Terminals ...............14

Connecting Headphones / Earphones ........................15

Location of Controls ....................................................16

Illuminated Remote Control ........................................16

Controls and Terminals on the TV...............................18

Power ON / OFF............................................................19

Connecting the Plug to the Wall Outlet ........................

19

How to Turn the Power On...........................................

19

Flow Chart of Main Menu ............................................20

Tuning channels

(Automatic channel programming)..................

22

Tuning channels

(Manual channel programming)......................

23

ASPECT Controls.........................................................24

VHF, UHF and CATV .....................................................26

Cable TV........................................................................27

Searching for the desired channel

(channel search)........

28

Playing a VCR or other peripheral equipment

(changing input modes)..............................................................

29

Playing games in game mode.....................................30

Recall / Mute .................................................................31

Split screen...................................................................32

Adjusting screen position and size............................34

Audio Adjustments ......................................................36

Picture Adjustments ....................................................38

Playing special video software...................................41

Closed Captions...........................................................42

Lock Feature.................................................................44

Customizing the VIDEO INPUT labels ........................48

Selecting STEREO/SAP/MONO...................................50

Using the off-timer .......................................................51

Viewing with reduced brightness

(POWER SAVE)...........

52

Video game player to VIDEO INPUT...........................53

Optimizing display for DVC recording mode

(DVC PLAYBACK MODE)......

54

Adjusting unnatural video images

(3D Y/C FILTER) ........

55

Automatically changing screen size for VIDEO INPUT modes .....

56

Cancelling automatic enlarging of screen.................57

Setting when 480p signals (sequential scan) are

input through COMPONENT VIDEO INPUT ........58

Geomagnetic correction

(Adjusting skewing of images)........

59

Switching languages for display ................................60

Operating peripheral equipment using the remote control.....

61

Troubleshooting ...........................................................69

Specifications...............................................................71

8

The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,

video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.

Before you purchase any cables, be sure you know what type of output and input connectors your various components

require. Also determine the length of cable you’ll need.

Installation

Receiver Location

This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.

Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the

screen.

Use of some types of fluorescent lighting can reduce remote control transmitter range.

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.

To insure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.

Optional External Equipment

AC Power Supply Cord

CAUTION: To prevent electric shock, match wide blade of plug to wide slot of AC outlet and fully insert. Do not use this

(polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent blade exposure.

Please take safety precautions to prevent the unit

from falling over.

The unit may fall over during earthquakes, or if

someone stands on, or shakes, the TV.

Safety Precaution

Fixing to a wall

Use a strong rope or a chain (not

included) to fasten the TV firmly

to a strong support such as a wall

or pillar.

9

Remote Control Battery Installation

Helpful Hint:

For frequent remote control users, replace old

batteries with Alkaline batteries for longer life.

Note: In order to maximize the life of the batteries, the

lighted buttons on the Remote Control can be turned OFF

and ON by pressing R-TUNE and RECALL at the same

time.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Observe the following precautions:

1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.

Helpful Hint:

Whenever you remove the batteries, you may

need to reset the remote control infrared

codes. We recommend that you record the code

on page 62, prior to setting up the remote.

Requires two AA batteries.

1. Turn the Transmitter face down.

Remove top cover by pressing

down on marking and sliding cover

off in the direction indicated.

2. Install the batteries as shown in

the battery compartment. (Polarity

+ or – must match the markings in

the compartment).

3. Replace the cover and slide in

reverse until the lock snaps.

Installation

Two AA size

10

Connecting the Antenna Cable to the RF In Terminal

1

23

INPUT

COMPONENT VIDEO INPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

Y

P

B

P

R

L

R

AUDIO

VIDEO

UHF Antenna

RF In Terminal

VHF Antenna

Mixer

75 Ohm

Coaxial Cable

Coaxial Antenna Plug

Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best reception an

outdoor antenna is recommended. Antenna Mode must be set to TV.

Installation

11

Installation

Antenna / Cable Connection

Incoming Cable From Home Antenna (75 Ohm)

VHF/UHF

on Back of Set

Cable Connection - For reception of cable channels (01 - 125) connect the cable supplied by your local cable company.

Antenna Mode must be set to CABLE. (Refer to Antenna Mode section.)

Incoming 75 Ohm Cable (From Cable Company)

VHF/UHF

on Back of Set

Note:

Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable

converter box is required for proper reception. Check with your local Cable company for its compatibility requirements.

12

Antenna Connection (Cable Box, no VCR)

Use this configuration when connecting the TV to a cable TV system using a Cable Box.

Antenna Connection (Cable Box, and VCR)

Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.

Connect the cable from the Output

terminal on the back of the Cable

Box to the ANT terminal on the back

of the TV.

ANTENNA

TERMINAL ON THE

BACK OF THE TV

CABLE BOX

TERMINAL ON THE BACK

OF THE CABLE BOX

Incoming Cable from

Antenna or Cable TV

System

OUTPUT

S-VIDEO

VIDEO

L-AUDIO-R

Connect the cable from the Output

terminal on the back of the VCR to

the Antenna input terminal on the

back of the TV.

Connect the cable from the

Output terminal on the back

of the Cable Box to the

Antenna input terminal on the

back of the VCR.

ANTENNA

TERMINALS ON THE

BACK OF THE TV

VCR

CABLE BOX

TERMINAL ON THE BACK

OF THE CABLE BOX

Incoming Cable

from Antenna or

Cable TV System

OUTPUT INPUT

ANT

OUTPUT INPUT

TO VCR

Connect the cable from the

antenna or cable system to

the Input terminal on the

back of the CABLE BOX.

ANT OUTPUT

ANT INPUT

Installation

Note: When the antenna cable is connected to the TV antenna terminal via a cable box or VCR, set the TV channel to CH3

or CH4, cable. This does not apply when signal is input from VIDEO INPUT.

13

Notes:

(1) When a monaural VCR is used, connect the monaural audio cable to the AUDIO-L (Left) terminal.

(2) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals.

Input 4 is located on the front of the unit.

Select the desired VIDEO input position by pushing the TV/VIDEO button. (See page 29)

(3) When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal and the video

input terminal are connected at the same time.

How to connect the “1, 2, 3, 4” input terminals

Installation

(Super-VHS VCR)

Audio

OUT

Video

OUT

S-Video

OUT

RL

VIDEO

AUDIO

1

23

INPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

(VHS VCR)

VIDEO

AUDIO

Audio

OUT

Video

OUT

R

L

1

23

INPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

Connects VCRs and other peripheral equipment

14

Installation

Audio

OUT

P

B

YP

R

DVD(Y•P

B

•P

R

)

AUDIO

DVD(Y•P

B

•P

R

) OUT

LR

DVD Player

COMPONENT VIDEO INPUT

Y

P

B

P

R

Y

P

B

P

R

L

R

AUDIO

VIDEO

1

2

Recording Equipment

(VHS VCR)

VIDEO

AUDIO

Audio

IN

Video

IN

S-Video

IN

S-VIDEO Cable

R

L

1

23

INPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

How to connect the COMPONENT VIDEO Input Terminals

How to connect the AV Prog. Out Terminals

The “Prog. Out” Terminals output the same signals as main picture on the TV screen and sound from the speaker at that

time, e.g. TV programs or signals from INPUT 1, 2, 3, 4 terminals.

Notes:

(1) Never connect the VIDEO IN and Prog. OUT terminals to the same video recorder, as this could cause incorrect

operation.

(2) The monitor output emits the main picture normal video and audio signals.

(3) Even if the television is in picture-out-picture condition, Prog. OUT terminals output the same signals as main picture on

the screen and sound from speaker. Sub picture including strobe, still, channel search, etc. will not be output at the

PROG. OUT terminals.

(4) DVD signal (Y, PB, PR) is not output at the Prog. OUT terminals.

(5) COMPONENT VIDEO INPUT

In order to prevent colors from interfering, image signals are divided into three signals of brightness, red and blue

(green is created automatically from these three signals). Each signal is processed from its own circuit and combined

on the screen, creating a natural picture.

15

Installation

Connecting Headphones / Earphones

Connect headphones / earphones as follows.

(Optional)

HPJ

LEFT P.

EPJ

RIGHT P.

INPUT4

S-VIDEO

VIDEO

L-AUDIO-R

You can listen to sound from each of the headphones Jacks as shown below.

LEFT headphones plug:

When a LEFT headphones plug is inserted into the LEFT headphones socket, all speakers will be automatically disconnected;

only the headphones will function.

Use Volume Up or Down button to control volume level.

Front jack

M3 plug jack

Headphones (stereo) or

earphones (monaural)

•

Volume and sound effects will

vary, depending on the

connected headphones or

earphones.

HPJ

LEFT P.

EPJ

RIGHT P.

Sounds from

speakers are turned

off.

Speakers also

function.

RIGHT P. (PICTURE)

•

During single screen, volume adjustments can be made.

•

During split screen, sound from the right screen is played

and its volume adjustments can be made.

1. Press the RH-SPLIT

button.

2. Immediately make

volume adjustments.

VCR

DVD

AUX

RCVR

TV

DTV

CBL

DBS

CH

VOL VOL

CH

MENU

INFO/RECALL

AV-ADJ

NORMAL

GAME

RH-SPLIT

EXIT

VCR REC

GUIDE

REW

SEARCH

STOP

PLAY

SPLIT

FF

ACTION

RH-EPJ VOLUME

0

– +

(M3 plug)

16

Illuminated Remote Control

Location of Controls

Power button

Press to turn the TV ON or OFF (See page 19).

Note:

The TV’s power cord must first be plugged into the wall outlet and then turned on at the

POWER switch (standby mode).

VCR

DVD

AUX

RCVR

TV

DTV

CBL

DBS

Operation of other Device

R-TUNE button

Switches to previously view

to channel or video mode.

Mode Selection buttons

Selects the operation mode for the remote control. (See page 60)

VCR Mode Selection for Remote Control

Digital Video Disk Mode Selection for Remote Control

Aux Mode Selection for Remote Control

TV Mode Selection for Remote Control

Digital Broadcasting Satellite for

Remote Control

Receiver/Amplifier Mode Selection

for Remote Control

Digital TV Mode Selection for Remote Control

Cable TV Mode Selection for Remote Control

Buttons

TV

VCR

CABLE/DBS

DVD/LD/CD

RCVR

Split Freeze

TV/VCR switch

Open/Close

Channel down

Center –

Channel up

Center +

Split Swap

Pause

Still/Pause

Slow -/LD-sideB

/Random

Slow +/LD-sideA

/Repeat

MUTE button

Push this button to mute the sound (See page 31).

R-TUNE

Buttons

TV

VCR

CABLE/DBS

DVD/LD/CD

RCVR

REW

Skip Search REW

Surround –

Split Search

STOP

PLAY

Split ON/OFF

FF

Skip Search FF

Surround +

17

LIGHT

ASPECT

MUTE TV/VIDEO

VCR

DVD

AUX

RCVR

TV

DTV

CBL

DBS

CH

VOL VOL

CH

MENU

INFO/RECALL

AV-ADJ

NORMAL

GAME

RH-SPLIT

EXIT

VCR REC

GUIDE

REW

SEARCH

STOP

PLAY

SPLIT

FF

FREEZE

TV/VCR

SLOW

SWAP

PAUSE

OPEN/CLOSE

VCR/DBS CHANNEL

STILL

123

456

789

0

R-TUNE PROG

ACTION

POWER

CH

VOL VOL

CH

MENU

INFO/RECALL

ACTION

MENU

ADJUST

CUSTOM

PICTURE

AUDIO

PICTURE ADJUST

POSITION/SIZE

SELECT

AUDIO ADJUST

SET UP

EXIT

PAGE

ACTION

STEREO

SAP

MONO

PanasonicAUTO

STANDARD

CH6

AV-ADJ

NORMAL

GAME

RH-SPLIT

EXIT

VCR REC

GUIDE

NORMALIZATION button

Each setting in the MENU screen

is reset to its standard values

(PICTURE, ADVANCE, AUDIO,

POSITION/SIZE)

GAME button

(See page 30)

RH-SPLIT button

Operates the right

screen (See page

33).

AV ADJUSTMENT

button

AV-adjustments are

displayed.

(See page 37, 39)

Direct program number

selection buttons

Reduces volume

Moves cursor to the

left during menu

mode.

Displays menu

Press the Menu

button to display

the Menu screen.

Changes to the next

channel down

Moves cursor downward

during menu mode.

Increase volume

Moves cursor to the

right during menu

mode.

Changes to the next channel up

Moves cursor upward during menu mode.

Lights the remote control buttons.

The selected button blinks when lit.

Panasonic AUTO NORMAL JUST

FULL ZOOM

ASPECT button

Change of screen size (See page 24).

PROG button

The screen below

is displayed for 10

seconds

Returns to normal

viewing from the

MENU screen.

Previous item in

MENU.

VCR Record button

TV/VIDEO button.

This input mode changes each time this button is pressed. (See page 29)

PROG

GUIDE button

for DBS.

R-TUNE

INFO/RECALL

Turning ON and OFF the remote

control illumination

Remote control illumination

can be turned ON OFF by

pressing the INFO/RECALL

button while pressing the

R-TUNE button.

Location of Controls

18

Location of Controls

Controls and Terminals on the TV

Action button (see page 21)

Volume up(+) / down(–) buttons (see page 20, 26)

Program number selection buttons (see page 21, 26)

ACTION TV/VIDEO

MENU

HPJ

LEFT P.

EPJ

RIGHT P.

INPUT4

S-VIDEO

VIDEO

L-AUDIO-R

VOLUME

CHANNEL

1

23

INPUT

COMPONENT VIDEO I NPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

Y

P

B

P

R

L

R

AUDIO

VIDEO

1

23

INPUT

COMPONENT VIDEO INPUT

PROG.

OUT

S - V I D E O

V I D E O

A U D I O - L

A U D I O - R

Y

P

B

PR

L

R

AUDIO

VIDEO

Input mode selection buttons (see page 29)

Menu button (see page 20)

Stereo headphone jack

Input4 terminals

Video camera and TV game

cable terminal

Press the

mark on the center of

the front cover to open.

Earphone jack

Open

Monitor out terminals

Input1 terminals

Input2 terminals

Input3 terminals

Component signal input

19

Power ON / OFF

Note:

Main plug types vary between countries. The power plug

shown at left may, therefore, not be the type fitted to

your set.

Push the POWER switch on the TV to turn the set on.

POWER-ON: Green

Example: The screen below is displayed for a while after

the TV is turned on. (setting condition is an

example.)

Press the POWER button on the remote control to turn

the TV off: Red (standby)

Press the POWER button on the remote control to turn

the TV on: Green

Turn the power to the TV set off by pressing the POWER

switch on the TV when the TV is on or in standby mode.

Connecting the Plug to the Wall Outlet

How to Turn the Power On

STEREO

SAP

MONO

PanasonicAUTO

STANDARD

CH6

LIGHT

ASPECT

MUTE TV/VIDEO

VCR

D

V

D

AUX

RCVR

TV

DTV

CBL

DBS

CH

VOL VOL

ACTION

POWER

Remote Control Sensor

La page est en cours de chargement...

Panasonic CT34WX50 Manuel utilisateur

Ce manuel convient également à

Panasonic CT34WX50 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents