Tripp Lite 4K/60 HDMI over Cat6 Extenders and Extender/Splitters Le manuel du propriétaire

1

Owner’s Manual

4K/60 HDMI over Cat6 Extenders

and Extender/Splitters

Extender Kit Models: B127-1A1-HH, B127-002-2H2

and B127-004-H4H

Local Unit Models: B127-002-H, B127-004-H

Remote Unit Models: B127-100-H, B127-100-H-SR

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Español 17 • Français 33 • Русский 49

19-01-427-933919.indb 1 3/18/2019 4:56:29 PM

2

Package Contents

Product Features

B127-1A1-HH

B127-002-2H2

B127-004-H4H

B127-002-H

B127-004-H

B127-100-H

B127-100-H-SR

Local Unit (L), Remote Unit (R)

or Both (B)

B B B L L R R

External Power Supplies

(0 or 1)

1 1 1 1 1 0 0

Mounting Hardware Y Y Y Y Y Y N

All

• Support a maximum video resolution of 4K (3840 x 2160) @

60 Hz with 4:4:4 Chroma Subsampling

• Support up to 7.1-channel surround sound audio

• HDMI 2.0, HDCP 2.2 and HDR compatible

• Plug and play—no software or drivers required

B127-1A1-HH

• HDMI over Cat6 Power-over-Cable (PoC) Extender Kit

• Extends a 4K (3840 x 2160) @ 60 Hz signal up to 125 ft. (38 m)

from the source

19-01-427-933919.indb 2 3/18/2019 4:56:29 PM

3

Product Features

• Additional HDMI port on the local transmitter unit allows connection of

local monitor

• Remote receiver unit features built-in equalization (EQ) control and

auto EDID image adjustment

• Includes mounting hardware that allows both the local transmitter and

remote receiver units to be wall-mounted, rack-mounted or pole-

mounted

B127-002-2H2

• HDMI over Cat6 Power-over-Cable (PoC) 2-Port Splitter/Extender Kit

• Extends a 4K (3840 x 2160) @ 60 Hz signal up to 125 ft. (38 m)

from the source

• Remote receiver unit features built-in equalization (EQ) control and

auto EDID image adjustment

• Kit includes a 2-Port Splitter Extender and two Remove Receivers

• Includes mounting hardware that allows unit to be wall-mounted,

rack-mounted or pole-mounted

B127-004-H4H

• HDMI over Cat6 Power-over-Cable (PoC) 4-Port Splitter/Extender Kit

• Extends a 4K (3840 x 2160) @ 60 Hz signal up to 125 ft. (38 m)

from the source

• Remote receiver unit features built-in equalization (EQ) control and

auto EDID image adjustment

• Kit includes a 4-Port Splitter Extender and four Remote Receivers

• Includes mounting hardware that allows unit to be wall-mounted,

rack-mounted or pole-mounted

• Additional HDMI port on the local transmitter unit allows connection of

local monitor

19-01-427-933919.indb 3 3/18/2019 4:56:29 PM

4

Product Features

B127-002-H

• 2-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit

• Splits an HDMI signal into two

• Works with remote receiver units to extend an HDMI signal past the

15 ft. (4.5 m) distance limitation

• Includes mounting hardware that allows unit to be wall-mounted,

rack-mounted or pole-mounted

B127-004-H

• 4-Port HDMI over Cat6 Extender/Splitter Local Transmitter Unit

• Splits an HDMI signal into four

• Includes an additional HDMI port, which can be used to connect a

local monitor or to daisy-chain additional B127-004-H units (up to

three units can be daisy-chained together)

• Works with remote receiver units to extend an HDMI signal past

the 15 ft. (4.5 m) distance limitation

• Includes mounting hardware that allows unit to be wall-mounted,

rack-mounted or pole-mounted

• Additional HDMI port on the local transmitter unit allows connection of

local monitor

B127-100-H

• HDMI over Cat6 Power-over-Cable (PoC) Remote Receiver Unit

• Works with B127-002-H and B127-004-H extender/splitters to extend

a 4K/60 Hz signal up to 125 ft. (38 m) from the source

• Built-in equalization (EQ) and EDID allows control for auto image

adjustment

• Includes mounting hardware that allows unit to be wall-mounted,

rack-mounted or pole-mounted

19-01-427-933919.indb 4 3/18/2019 4:56:29 PM

5

Product Features

Disclaimer

B127-100-H-SR

• HDMI over Cat6 Power-over-Cable (PoC) Short Distance Remote

Receiver Unit

• Works with B127-002-H and B127-004-H extender/splitters to extend

a 4K/60 Hz signal up to 50 ft. (15 m) from the source

• Built-in equalization (EQ) and EDID allows control for auto image

adjustment

Optional Accessories:

• N202-Series Cat6 24 AWG Solid-Wire Patch Cables

• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

Before installation, please check the following settings of your source(s)

and TV/monitor(s):

1. Set to display 60 Hz. Double-check factory settings, as default can

be set to a lower frequency (Hz) than advertised.

2. Ensure the input setting of your monitor is set at HDMI 2.0. Some

displays may have default setting at HDMI 1.4

3. Verify your monitor has the HDR feature enabled. Some displays

may have this feature disabled as a factory setting.

4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/

monitor. Conﬁrm with your TV/monitor manufacturer which HDMI ports

support UHD Deep Color.

Note: If wishing to connect a local monitor to your installation, depending on

your TV/monitor make/model, the UHD Deep Color setting may need to be

disabled on your local TV/monitor to achieve 4K 60 Hz resolution.

19-01-427-933919.indb 5 3/18/2019 4:56:29 PM

6

Mounting Instructions (select models only)

The B127-1A1-HH, B127-002-2H2, B127-004-H4H, B127-002-H,

B127-004-H and B127-100H include includes mounting hardware that

allows for a variety of mounting methods. The following images illustrate

how the included mounting brackets can be attached for different

installations.

Note: The model shown in the below images is for illustrative purposes only. Your

product may vary by model number, size or port orientation. The mounting options

for all over IP units are the same.

Wall-mount

19” Rack-mount Pole-mount

19-01-427-933919.indb 6 3/18/2019 4:56:29 PM

7

Standard Extender Kit Installation

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG, will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire

cabling.

3) The installation diagram shows a B127-1A1-HH unit.

4) External power is not required for remote receiver units due to Power-over-Cable

(PoC) technology incorporated in the transmitter units.

OPTIONAL LOCAL

MONITOR HDR PLAYER

LOCAL

TRANSMITTER

REMOTE

RECEIVER

Up to 125 ft. (38 m) at 4K/60 Hz

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

1

2

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the local transmitter unit.

19-01-427-933919.indb 7 3/18/2019 4:56:29 PM

8

Standard Extender Kit Installation

3. Optional for B127-1A1-HH: Using an HDMI 2.0 cable (such as

Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect

a local monitor to the LOCALOUT port on the B127-1A1-HH local

transmitter unit.

4. Using Cat6 cable, connect the RJ45 port on the local transmitter unit

to the RJ45 port on the remote receiver unit.

5. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the remote receiver unit’s HDMI

port to a monitor.

6. Turn the power on to your connected TVs/monitors. The LOCAL

(orange) LED will illuminate to indicate local port has been connected

to a display.

7. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED on the local transmitter unit

will illuminate to indicate the unit is receiving power from the external

power supply. The POWER (green) LED on the remote receiver unit

will illuminate to indicate the unit is receiving power from the local

transmitter unit through PoC technology.

8. Turn on the power to the HDMI source. The OUTPUT (orange) LED

on the local transmitter unit illuminates to indicate a signal is being

received from the source.

9. The (orange) RJ45 LED will illuminate on both local transmitter and

remote receiver units to indicate a signal is being received from

source to display. The screen should now display on the connected

monitor.

19-01-427-933919.indb 8 3/18/2019 4:56:29 PM

9

Standard Extender/Splitter Installation

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG, will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire

cabling.

3) The installation diagram shows the B127-004-H local transmitter unit. The

B127-002-H installation is the same, except there are only two remote ports and

no local monitor port.

4) External power is not required for the B127-100-H and B127-100-H-SR units.

5) These installation instructions can be used for the B127-002-2H2 and

B127-004-H4H extender kits.

B127-004-H4H

extender kit

OPTIONAL

LOCAL MONITOR

HDR PLAYER

B127-004-H

B127-100-H

B127-100-H-SR

B127-100-H

B127-100-H-SR

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

2

1

3

19-01-427-933919.indb 9 3/18/2019 4:56:29 PM

10

Standard Extender/Splitter Installation

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127-002-H or B217-004-H units.

3. Optional for B127-004-H: Using an HDMI 2.0 cable (such as

Tripp Lite P569-XXX-CERT or P568-XXX-2A Series cables), connect an

HDMI monitor to the LOCAL port on the B127-004-H unit.

4. Using Cat6 cable, connect one of the RJ45 output ports on the local

transmitter unit to the RJ45 input port on a B127-100-H (up to

125 ft./38 m) or B127-100-H-SR (up to 50 ft./15 m) remote

receiver unit.

5. Repeat step 5 for each additional remote unit being connected.

6. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the B127-100-H-SR or

B127-100-H to a display.

7. Turn on the power to all your connected TVs or monitors. The LOCAL

(orange) LED will illuminate to indicate the port has been connected

to a display.

8. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED will illuminate to indicate

the unit is receiving power from the external power supply. On the

B127-100-H, the POWER (green) LED will illuminate to indicate

the unit is receiving power from the extender/splitter. On the

B127-100-H-SR, the (green) LED next to the RJ45 port will illuminate

to indicate the unit is receiving power from the extender/splitter.

19-01-427-933919.indb 10 3/18/2019 4:56:29 PM

11

Standard Extender/Splitter Installation

Splitter Daisy-Chain Installation

(B127-004-H only)

9. Turn on the power to the HDMI source. The (orange) RJ45 LEDs will

illuminate on the B127-002-H and B127-004-H to indicate the

unit is receiving a signal from the source. Additionally, the OUTPUT

(orange) LED will illuminate for each port signal connection.

10. The RJ45 (orange) LEDs on the B127-100-H and orange LED on the

B127-100-H-SR will illuminate to indicate a signal is being received

from the extender/splitter. The screen should now display on the

connected monitors.

Notes:

1) Test to ensure the entire installation works properly before pulling cables through

ceilings/walls.

2) To achieve maximum distance and performance, use 24 AWG solid-wire Cat6

cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher

than 24 AWG, will result in shorter extension distance. Higher gauge cabling,

such as 26 AWG, has a more limited transmission capability than lower gauge

cabling. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire

cabling.

3) Using the B127-100-H, a 4K/60 Hz signal can be extended up to 125 ft. (38 m)

from the source. Using a B127-100-H-SR, a 4K/60 Hz signal can be extended

up to 50 ft. (15 m) from the source.

19-01-427-933919.indb 11 3/18/2019 4:56:29 PM

12

Splitter Daisy-Chain Installation

(B127-004-H only)

Level 1

Level 2

Level 3

OPTIONAL

LOCAL

MONITOR

HDR PLAYER

B127-004-H

Up to 125 ft. (38 m) Cat6 cable at 4K/60 Hz

Up to 50 ft. (15 m) Cat6 cable at 4K/60 Hz

Up to 15 ft. (4.5 m) HDMI 2.0 cable at 4K/60 Hz

Up to 6 ft. (1.8 m) HDMI 2.0 cable at 4K/60 Hz

1

3

2

4

19-01-427-933919.indb 12 3/18/2019 4:56:30 PM

13

Splitter Daisy-Chain Installation

(B127-004-H only)

1. Make sure all equipment in the installation—such as TVs, Blu-ray

players and the transmitter—is powered OFF.

2. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the HDMI source to the INPUT

port on the B127-004-H unit.

3. Using a 6 ft./1.83 m HDMI 2.0 cable (such as Tripp Lite

P569-006-CERT or P568-006-2A cables), connect the LOCAL port on

the B127-004-H to the INPUT port on a second B127-004-H unit.

4. Repeat step 3 if connecting a third B127-004-H unit.

Note: Only three levels of splitters can be cascaded.

5. Optional: Using an HDMI 2.0 cable (such as Tripp Lite

P569-XXX-CERT or P568-XXX-2A Series cables), connect a local

monitor to the LOCAL HDMI port of the last B127-004-H unit in the

installation.

6. Using Cat6 cable, connect one of the RJ45 output ports on the local

transmitter units to the RJ45 input port on a B127-100-H or

B127-100-H-SR remote receiver unit.

7. Repeat step 6 for each additional remote unit being connected.

8. Using an HDMI 2.0 cable (such as Tripp Lite P569-XXX-CERT or

P568-XXX-2A Series cables), connect the B127-100-H or

B127-100-H-SR to a display.

9. Repeat step 8 for each additional monitor you are connecting to a

remote receiver unit.

10. Turn on the power to all your connected displays.

11. Connect the external power supply to the local transmitter unit and

plug it into an available wall outlet or (optional) a Tripp Lite Surge

Protector, Power Distribution Unit (PDU) or Uninterruptible Power

Supply (UPS). The POWER (green) LED will illuminate to indicate the

unit is receiving power from the external power supply.

19-01-427-933919.indb 13 3/18/2019 4:56:30 PM

14

Splitter Daisy-Chain Installation

(B127-004-H only)

12. Repeat step 11 for each additional B127-004-H unit in the daisy

chain.

13. B127-100-H and B127-100-H-SR: The green and orange LEDs will

illuminate, with the green LED indicating the unit is receiving power

from the extender/splitter, and the orange LED indicating the unit is

connected to a powered ON local unit via Cat6 cable.

14. Turn on the power to the HDMI source. The orange RJ45 LEDs

will illuminate on the B127-004-H to indicate the unit is receiving

a signal from the source. The screen should now display on the

connected monitors.

19-01-427-933919.indb 14 3/18/2019 4:56:30 PM

15

Warranty and Product Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and

workmanship for a period of one (1) year from the date of initial purchase.

TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its

sole option) any such defective products. To obtain service under this warranty, you

must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or

an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE

or an authorized TRIPP LITE service center with transportation charges prepaid and

must be accompanied by a brief description of the problem encountered and proof

of date and place of purchase. This warranty does not apply to equipment which

has been damaged by accident, negligence or misapplication or has been altered or

modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied

warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the

purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR

DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING

OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGE. Speciﬁcally, TRIPP LITE is not liable for any costs, such as lost

proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software,

loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll

be automatically entered into a drawing for a chance to win a FREE Tripp Lite

product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

19-01-427-933919.indb 15 3/18/2019 4:56:30 PM

16

Warranty and Product Registration

WEEE Compliance Information for Tripp Lite Customers and Recyclers

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and

implementing regulations, when customers buy new electrical and electronic

equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis

(this varies depending on the country)

• Send the new equipment back for recycling when this ultimately becomes

waste

WARNING

Use of this equipment in life support applications where failure of this equipment

can reasonably be expected to cause the failure of the life support equipment or to

signiﬁcantly affect its safety or effectiveness is not recommended.

Tripp Lite has a policy of continuous improvement. Speciﬁcations are subject to

change without notice. Photos and illustrations may differ slightly from actual

products.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

19-01-427 93-3919_RevA

19-01-427-933919.indb 16 3/18/2019 4:56:30 PM

17

Manual del Propietario

Extensores y Extensores

Divisores HDMI 4K / 60

sobre Cat6

Modelos de Juego Extensor: B127-1A1-HH,

B127-002-2H2 y B127-004-H4H

Modelos de Unidad Local: B127-002-H, B127-004-H

Modelos de Unidad Remota: B127-100-H,

B127-100-H-SR

1111 W. 35th Street, Chicago, IL 60609 EE UU • www.tripplite.com/support

English 1 • Françaís 33 • Русский 49

19-01-427-933919.indb 17 3/18/2019 4:56:30 PM

18

Contenido del Empaque

Características del Producto

B127-1A1-HH

B127-002-2H2

B127-004-H4H

B127-002-H

B127-004-H

B127-100-H

B127-100-H-SR

Unidad Local (L), Unidad

Remota (R) o Ambas (B)

B B B L L R R

Fuentes de Alimentación

Externas (0 o 1)

1 1 1 1 1 0 0

Accesorios de instalación Y Y Y Y Y Y N

Todas

• Soportan una resolución de video de 4K (3840 x 2160) @

60 Hz con Submuestreo de Croma 4:4:4

• Soporta audio de sonido envolvente de hasta 7.1 canales

• Compatible con HDMI 2.0, HDCP 2.2 y HDR

• Conectar y Usar—No requiere software ni controladores

B127-1A1-HH

• Juego Extensor HDMI sobre Cat6 con PoC

• Extiende una señal de 4K (3840 x 2160) @60 Hz hasta a 38 m [125 pies]

de la fuente

19-01-427-933919.indb 18 3/18/2019 4:56:30 PM

19

Características del Producto

• Un puerto HDMI adicional en la unidad transmisora local permite la conexión

de un monitor local

• La unidad receptora remota cuenta con un control de ecualización (EQ)

incorporado y ajuste de imagen EDID automático

• Incluye los accesorios de instalación que permiten que las unidades

transmisora local y receptora remota sean instaladas en rack, en la pared o

en poste.

B127-002-2H2

• Juego de Extensor y Divisor de 2 Puertos HDMI sobre Cat6 con PoC

• Extiende una señal de 4K (3840 x 2160) @60 Hz hasta a 38 m [125 pies]

de la fuente

• La unidad receptora remota cuenta con un control de ecualización (EQ)

incorporado y ajuste de imagen EDID automático

• El Juego Incluye un Extensor Divisor de 2 Puertos y dos Receptores Remotos

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

B127-004-H4H

• Juego de Extensor Divisor de 4 Puertos HDMI sobre Cat6 con PoC

• Extiende una señal de 4K (3840 x 2160) @60 Hz hasta a 38 m [125 pies]

de la fuente

• La unidad receptora remota cuenta con un control de ecualización (EQ)

incorporado y ajuste de imagen EDID automático

• El Juego Incluye un Extensor Divisor de 4 Puertos y cuatro Receptores

Remotos

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

• Un puerto HDMI adicional en la unidad transmisora local permite la conexión

de un monitor local

19-01-427-933919.indb 19 3/18/2019 4:56:30 PM

20

Características del Producto

B127-002-H

• Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 2 Puertos

• Divide una señal HDMI en dos

• Trabaja con unidades receptoras remotas para extender una señal HDMI

más allá de la limitación de 4.57 m [15 pies]

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

B127-004-H

• Unidad Transmisora Local Extensor Divisor HDMI sobre Cat6 de 4 Puertos

• Divide una señal HDMI en cuatro

• Incluye un puerto HDMI adicional que puede utilizarse para conectar un

monitor local o unidades B127-004-H adicionales en cadena (pueden

encadenarse hasta tres unidades juntas)

• Trabaja con unidades receptoras remotas para extender una señal HDMI

más allá de la limitación de 4.57 m [15 pies]

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

• Un puerto HDMI adicional en la unidad transmisora local permite la conexión

de un monitor local

B127-100-H

• Unidad Receptora Remota HDMI sobre Cat6 PoC

• Trabaja con los Extensores Divisores B127-002-H y B127-004-H para

extender una señal 4K / 60Hz hasta a 38 m [125 pies] de la fuente

• La ecualización incorporada (EQ) y EDID permiten el control para el ajuste

automático de la imagen

• Incluye los accesorios de instalación que permiten que la unidad sea

instalada en rack, en la pared o en poste.

19-01-427-933919.indb 20 3/18/2019 4:56:30 PM

La page charge ...

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Extender/Splitters Le manuel du propriétaire

Tripp Lite 4K/60 HDMI over Cat6 Extenders and Extender/Splitters Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents