Kodak F330 Manuel utilisateur

F320/F330 AutoCamera

Consumer Imaging

EASTMAN KODAK COMPANY

Rochester, NY 14650

Kodak

Camera Identification

Unfold front and back cover flaps of manual to view camera diagrams.

ENGLISH/ESPAÑOL/FRANÇAIS

1 shutter button

2 self-timer button

3 LCD panel

4 viewfinder

5 self-timer bulb

6 flash

7 lens-cover switch

8 lens

9 film-door lever

15 film chamber

16 film door

17 tripod socket

18 battery door

1

2

3

4

9

6

7

8

5

15

18

16

17

Pt. No. 919 6403 Printed in USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause

undesired operation.

NOTE: Your model camera has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits provide reasonable

protection against interference in residential use. The camera generates, uses and can

radiate radio frequency energy and, if not used in accordance with the instructions, may

cause interference to radio communications. There is no guarantee that interference will

not occur. If this camera does cause interference to radio or television reception, which

can be determined by turning the camera off and on, you may reduce the interference by

the following:

— Reorient or relocate the receiving antenna.

— Increase the separation between the camera and the receiver.

— Consult the dealer or an experienced radio/television technician for help.

Changes or modifications not approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

19

LCD Panel

20

21

10 print-format

switch

11 viewfinder

eyepiece

12 film-rewind button

13 flash-ready lamp

14 strap post

19 self-timer indicator

20 picture counter

21 battery symbol

10

11

13

14

12

1

Kodak

ENGLISH

F320/F330 Auto Camera

NEED HELP WITH YOUR CAMERA OR MORE INFORMATION

ABOUT THE ADVANCED PHOTO SYSTEM?

Go to our Web site at http://www.kodak.com (for US) or

http www.kodak.ca (for Canada) or call: Kodak (US only) from

9:00 a.m. to 7:00 p.m. (Eastern time) Monday through Friday

at 1-800-242-2424.

Kodak (Canada only) from 8:00 a.m. to 5:00 p.m. (Eastern time)

Monday through Friday at 1-800-465-6325, ext. 36100; for the

Toronto area, call 416-766-8233, ext. 36100. When you call,

please have your camera available.

For warranty purposes, please keep your sales receipt as

proof of the date of purchase.

2

CONTENTS

CAMERA FEATURES ................ 3

ATTACHING THE STRAP .......... 4

LOADING THE BATTERIES ...... 5

Low-batteries indicator......... 6

Battery tips .......................... 6

Power shutdown................... 7

LOADING THE FILM ................. 8

TAKING PICTURES ................ 10

Typical print sizes

(formats) .......................... 12

Tips for better pictures ...... 13

TAKING FLASH PICTURES .... 14

Flash-to-subject distance .. 15

USING THE SELF-TIMER ....... 15

UNLOADING THE FILM .......... 16

Automatic rewind ............... 16

Manual rewind .................... 17

CARING FOR

YOUR CAMERA .................... 18

TROUBLESHOOTING ............. 19

SPECIFICATIONS ................... 21

3

CAMERA FEATURES

Three Print Formats

• You can take three different

size pictures: Classic (C), Group/

HDTV (H), and Panoramic (P)

pictures from the same film

cassette. The viewfinder

changes to show the selected

picture size.

Double Exposure Protection (DEP)

• You don’t need to worry about

accidentally re-exposing your

film. Your camera reads the

Film Status Indicator (FSI) on

the film cassette to prevent

double exposures.

Easy, Drop-in Loading

• Easy, drop-in loading is fast

and virtually error-free. The

camera uses KODAK ADVANTIX

Film. The film cassette com-

municates the status of film

and becomes the carrier and

storage container for the

processed film.

Safety-Locked Film Door

• After you close the safety-

interlocked film door and the

film starts to prewind, you

cannot open the door until the

film is completely rewound into

the film cassette.

4

ATTACHING THE STRAP

Thread the shorter looped end

of the strap under the strap

post (14); pull the longer end

through the shorter loop and pull

it tight.

Film Status Indicator (FSI)

• A highlighted indicator

advances from one symbol to

another to identify the status

of the film inside the cassette.

4

3

2

1

Processed negatives

Unexposed

Partially exposed

Fully

exposed

5

• Before you remove the old

batteries, close the lens cover.

LOADING THE BATTERIES

This camera uses 2 AAA-size

batteries that supply power for all

camera operations.

1.Open the battery door (18).

2. Place the batteries over the

battery-pull strap and insert

into the chamber as shown.

3. Snap the battery door closed.

NOTE: Insert the batteries into

the camera before you load

the film.

6

• Keep batteries away

from children.

• Do not try to take apart,

recharge or short circuit the

batteries, or subject them to

high temperature or fire.

• Do not use rechargeable

batteries.

• Store batteries in their original

packaging prior to use.

• Remove the batteries from the

camera when the camera is

not going to be used for an

extended length of time.

• Replace all batteries with the

same brand and grade and as

a set at the same time.

Low-batteries indicator

It’s time to replace the batteries

when the battery symbol (21)

appears on the LCD panel (3) or

when the flash-ready lamp (13)

takes longer than 12 seconds to

turn on.

Battery tips

• Dispose of batteries according

to local and national regulations.

• Remember to keep spare

batteries with you at all times.

• Read and follow all warnings

and instructions supplied by

the battery manufacturer.

7

• In the unlikely event that

battery fluid leaks onto your

skin, contact Kodak Health,

Safety and Environment

Information at 1-716-722-5151

in the U.S. Customers outside

the U.S. can contact their local

health care provider.

• In the unlikely event that

battery fluid leaks inside the

camera, U.S. customers can

contact the Kodak Information

Center (KIC) at 1-800-242-

2424. Customers outside the

U.S. can contact their local

Kodak Customer Service

representative.

Power shutdown

To conserve battery power, the

camera automatically goes into a

sleep mode if it is not operated

for more than 4 minutes. You can

awaken the camera by taking a

picture or by closing and

reopening the lens cover. When

the camera will not be used for an

extended length of time, close

the lens cover to completely turn

off the camera.

8

• The film door opens only

when the film chamber is

empty or the film in the

camera is completely

rewound into the film cassette.

2. Insert the film cassette

completely into the film

chamber (15).

LOADING THE FILM

You can load film into the camera

with the camera ON or OFF.

Insert the batteries into the camera

before you load the film.

1. Move the film-door lever (9) to

open the film door (16).

9

Look for this logo to be certain that the film

you buy is made for this camera.

Look for this logo to select a certified

photofinisher for developing your film and to

assure that you get all the features of the

Advanced Photo System.

• Make sure the Film Status

Indicator (FSI) on the film

cassette is at

●

(#1 position)

for a new cassette.

• Do not force the film

cassette into the film chamber.

3. Close the film door to start the

automatic film prewind. The

picture counter (20) on the LCD

panel (3) displays the number

of pictures remaining on

the film.

• After you close the safety-

interlocked film door and the

film starts to prewind, you

cannot open the door until

the film is completely

rewound into the film cassette.

10

TAKING PICTURES

You can take Classic (C), Group/

HDTV (H)*, and Panoramic (P)

pictures on the same film cassette. Your

photo-processing cost may be

based on the format size(s) that

you use to expose the film.

* High Definition Television (HDTV) prints

are the same aspect ratio as the TV for

CD interface capabilities.

1. Slide the lens-cover switch (7)

to uncover the lens (8) and

to turn on the camera.

11

3. Frame your subject within the

viewfinder eyepiece (11).

For a sharp picture, stand at

least 3.3 ft (1.0 m) from

your subject.

• For low-light conditions, wait

until the flash-ready lamp (13)

turns green.

2. Move the print-format switch (10)

to select C, H, or P format.

The viewfinder changes to

show the selected field of view.

P

H

C

CH P

12

Typical print sizes (formats)

CH P

Classic Group (HDTV) Panoramic

3.5 x 5 in. or 4 x 6 in. 3.5 x 6 or 4 x 7 in. 3.5 x 8.5 in. to 4 x 11.5 in.

(88.9 x 127 mm or (88.9 x 152 mm or (88.9 x 216 mm to

102 x 152 mm) 102 x 178 mm) 102 x 292.7 mm)

NOTE:

Your photofinisher generally provides 4 x 6, 4 x 7, and 4 x 11.5 in.

(102 x 152, 102 x 178, and 102 x 292.7 mm) sizes. Some local printers may offer

3.5 x 5, 3.5 x 6, and 3.5 x 8.5 in. (88.9 x 127, 88.9 x 152, and 88.9 x 216 mm) sizes.

4. Press the shutter button (1)

to take the picture.

13

Tips for better pictures

• Hold your camera steady

by keeping your elbows close

to your body when you press

the shutter button to avoid

blurry pictures.

• Keep your pictures simple.

Move close enough to your

subject so that it fills the

viewfinder but not closer

than 3.3 ft (1.0 m).

• Take pictures at the subject’s

level. Kneel down to take

pictures of children and pets.

• Keep the sun behind you.

This provides the best

subject illumination.

• Hold your camera vertically to

capture tall, narrow subjects,

such as a waterfall, skyscraper,

or a single person.

• Add interest to your picture by

framing it with a tree branch,

a window, or even the rails of

a fence.

• Stand at an angle to shiny

surfaces like windows or

mirrors to avoid flash reflection

and bright spots in your pictures.

• Turn on all the room lights and

have your subject look at the

lights. This helps to reduce red

eyes in flash pictures.

14

TAKING FLASH PICTURES

In dim light, such as indoors or

outdoors in heavy shade, or on

dark overcast days, you need

flash. Your camera has a built-in

automatic flash that fires

as needed.

• Don’t take pictures beyond

the maximum distance or

your pictures will be dark.

4. Wait for the flash-ready

lamp (13) to turn green.

5. Press the shutter button (1)

to take a picture.

1. Slide the lens-cover switch (7)

to uncover the lens (8) and

to turn on the camera.

2. Frame your subject within the

viewfinder eyepiece (11).

3. Keep the subject within the

distance range for the speed

of film in your camera (see

Flash-to-subject distance).

15

USING THE SELF-TIMER

Use this feature to include

yourself in pictures.

Flash-to-subject distance

ISO film Flash-to-subject

speed distance

100 3.3 to 10 ft

(1.0 to 3.1 m)

200 3.3 to 14 ft

(1.0 to 4.3 m)

400 3.3 to 18 ft

(1.0 to 5.5 m)

1. Attach a tripod to the camera

tripod socket (17) or place it on

a firm support.

2. Press the self-timer button (2).

• The self-timer

indicator (19)

appears

on the LCD

panel (3).

3. Frame your

subject within

the viewfinder

eyepiece (11)

and allow room for yourself in it.

16

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds

the film into the cassette after

the last exposure.

1. Wait for the camera motor to

stop to ensure that the film is

completely rewound into the

film cassette.

• The picture counter (20)

on the LCD panel (3) displays

“0.” The picture-counter

display disappears when the

lens cover is closed.

2. Move the film-door lever (9) to

open the film door (16).

4. Hold the camera steady and

gently press the shutter

button (1).

5. Quickly position yourself in the

composed picture making sure

that you see the self-timer

bulb (5).

• The self-timer bulb glows and

then blinks during the last two

seconds of countdown.

• To cancel the self-timer

selection before the shutter

releases, close the lens

cover.

• The self-timer automatically

turns off after the shutter

releases.

17

3. Remove the film cassette from

the camera and reload with

new KODAK ADVANTIX Film.

• The FSI on the fully-exposed

film cassette is at ✖

(#3 position).

Manual rewind

If you don’t want to take pictures on

the entire film, you can manually

actuate the automatic rewind.

1. Press the film-rewind button (12)

to start the

auto-film

rewind.

2. See

Automatic

rewind,

steps 1–3.

NOTE:

You cannot

reload partially exposed film

into this camera to continue

taking pictures.

18

CARING FOR YOUR CAMERA

• Protect the camera from dust,

moisture, sudden impact, and

excessive heat.

CAUTION: Do not use solvents

or harsh or abrasive cleaners

on the camera body.

• If the lens appears dirty,

breathe on it to form a mist

and wipe the surface gently

with a soft, lintless cloth or a

camera lens-cleaning tissue.

Never wipe a dry lens.

CAUTION: Do not use solvents

or solutions not designed for

cleaning camera lenses. Do

not use chemically treated

tissues intended for cleaning

eyeglasses.

• Remove the batteries when

you store the camera for an

extended time.

CAUTION: To prevent possible

damage and electrical shock,

do not attempt to disassemble

or repair the camera or flash

unit by yourself.

La page charge ...

Kodak F330 Manuel utilisateur

Kodak F330 Manuel utilisateur

dans d''autres langues

Documents connexes