Braun 32899 Rev A Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

32899 Rev A
January 2007
Operator's
Manual
®
®
"Providing Access to the World"
International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA
1-800-THE LIFT
®
(574) 946-6153 FAX: (574) 946-4670
braunmobility.com
entervan.com
W
A
RNING
Read manual
before operating.
Failure to do
so may result in
serious bodily
injury and/or
property damage.
Keep manual in
Entervan.
Oper
ual
Man
ator's
featuring 2004 and Newer
Wheelchair-Accessible
Lowered Floor Conversion
CONSUMER
BRAUN
Foldout Ramp
CONSUMER
BRAUN
Foldout Ramp
Toyota Minivans
Toyota Minivans
®
Toyota Minivans
Toyota Minivans
®
Foldout Rampvan featuring
®
Foldout Rampvan featuring
featuring Toyota Minivans
Foldout Rampvan
®
featuring Toyota Minivans
Foldout Rampvan
®
Congratulations
We at The Braun Corporation wish to express our fullest appreciation
on your new purchase. With you in mind, our skilled craftsmen have de-
signed and assembled the finest lowered floor vehicle available.
This manual includes safety precautions, operating instructions, manual
operating instructions, and instructions for maintenance and lubrication pro-
cedures.
Your Rampvan
®
is built for dependability, and will bring you years of
pleasure and independence, as long as the maintenance is performed regu-
larly and the Rampvan
®
is operated by an instructed person.
Sincerely,
THE BRAUN CORPORATION
Ralph W. Braun
Chief Executive Officer
Page 1
CONTENTS
WARRANTY AND REGISTRATION ................................ 2
INTRODUCTION ............................................................. 3
RAMPVAN OPERATION QUICK REFERENCE
GUIDE .......................................................................... 4, 5
FEATURES .................................................................. 6, 7
SAFETY PRECAUTIONS ................................................ 8
OPERATION
Terminology .............................................................. 9
One-Touch Control System ...................................... 9
Control Switches ................................................ 10-13
Ramp Access Sliding Door ............................... 14, 15
Kneel System ..................................................... 16-18
Power Ramp Operation .......................................... 19
Power Ramp Safety ............................................... 20
Power Ramp Manual Operation ............................. 21
Ramp Safety (General) ..................................... 22-24
WHEELCHAIR AND OCCUPANT RESTRAINT ...... 25-34
SEAT REMOVAL AND INSTALLATION
Front Seats (General Information) .......................... 35
Front Seat Wiring Harnesses ........................... 36, 37
Front Seat Removal and Installation
Instructions ....................................................... 38, 39
Third Row Power Seat Operation ........................... 40
Third Row Power Seat Removal and
Installation Instructions ..................................... 41-43
Third Row Non-Power Seat Removal
and Installation Instructions ............................. 44, 45
WARRANTY ............................................................. 46-49
RETURN AUTHORIZATION PROCEDURE .................. 49
PREVENTIVE MAINTENANCE .............................. 50, 51
JACKING AND TIRE CHANGING INSTRUCTIONS .... 52
REPORTING SAFETY DEFECTS ................................. 53
BELOW FLOOR OBSTRUCTIONS ....................... 54, 55
TOWING ......................................................................... 56
Page 2
WARRANTY AND REGISTRATION INSTRUCTIONS
Examine your Rampvan
®
for any damage. Should
any damage have occurred during delivery, notify
the carrier at once with any claims.
The warranty/registration card shown
here is supplied with each Rampvan
®
.
5HYLHZWKHGHOLYHU\FKHFNOLVWDQGÀOO
out the warranty registration informa-
tion with your sales representative
and mail it to The Braun Corporation.
A detailed Warranty section is provid-
ed within this manual. The warranty
card must be processed to activate
the warranty.
5HFRUGWKHODVWHLJKWGLJLWVRIWKHYHKLFOHLGHQWLÀFD-
tion number (VIN) in the space provided for future
reference. This information must be provided
ZKHQÀOLQJDZDUUDQW\FODLPRURUGHULQJSDUWV.
9HKLFOH,GHQWLÀFDWLRQ9,11XPEHU
INDEPENDENT MOBILITY SYSTEMS
FARMINGTON, NM 87401-9916
4100 W. PIEDRAS STREET
No Postage
Necessary
If Mailed In The
United States
FIRST CLASS PERMIT NO. 63 FARMINGTON, NM
BUSINESS REPLY MAIL
Note: Attached
to glove box door.
Page 3
INTRODUCTION
Operation Quick Reference Guide
The Braun Rampvan
®
lowered
ÁRRUFRQYHUVLRQLVGHVLJQHGWR
provide years of pleasure and
mobility independence. Familiarity
with proper operation and mainte-
nance procedures will help ensure
safe, trouble free operation.
The Braun Corporation encour-
ages wheelchair passengers and
their attendant(s) to review the
material contained in this manual
with your Rampvan
®
sales rep-
resentative, EHIRUHDWWHPSWLQJ
operation. Any questions or con-
cerns can be answered by your
sales representative at that time.
This manual addresses Ramp-
van
®
standard features as well as
options. Refer to the instructions
applicable for your package, and
disregard the information that
does not apply.
The Rampvan
®
Operation Quick
Reference Guide hanging on
the mirror provides a condensed
explanation of Entervan operation
(shown at right). Read the guide
and then insert it in this manual
for future reference. Note: An
Operation Quick Reference Guide
(overview) section is provided on
pages 4 and 5 of this manual also.
Contact The Braun Corporation
at 1-800-THE LIFT
®
if any of this
information is not understood.
Store this manual in the vehicle
along with your Toyota owner’s
manual.
If you experience an operation
problem or there is any sign of
wear, damage, or other abnormal
condition, contact your sales rep-
resentative or call The Braun
Corporation at 1-800-THE LIFT
®
.
One of our national Product Sup-
port representatives will direct
you to a Braun authorized service
center.
Page 4
Interior mounted control switches
display one of these graphics.
2QH7RXFK&RQWURO$FWLYDWLRQ
Rampvan power door, kneel functions and power
ramp are activated by SUHVVLQJDQGUHOHDVLQJ
any control switch.
Open Functions: When activating the Open
functions, the power door opens, the kneel sys-
tem lowers the rear of the vehicle and the ramp
unfolds.
&ORVH)XQFWLRQV When activating the Close
functions, the ramp folds, the kneel system raises
the rear of the vehicle and the power door closes.
0DQXDO2SHUDWLRQ
In event of power or equipment failure, the door,
ramp and kneel system can be manually operated.
Read this manual for further details.
RAMPVAN OPERATION QUICK REFERENCE GUIDE
or
PWR
DOOR
Press and
UHOHDVH this
switch.
Toyota Remote
Keyless Entry
Transmitter
Rampvan power functions
are managed by the One-
Touch electronic control
system. The control sys-
tem can be activated using
the Toyota remote keyless
entry transmitter, any one
of the interior mounted
control switches
or the optional
magnetic entry.
Details on
pages 10-13.
Rampvan Operation Overview
7KLVRYHUYLHZSURYLGHVDVLPSOLÀHGH[SODQDWLRQ
of Rampvan operation. Read the entire owner’s
(operator’s) manual for complete details. Contact
The Braun Corporation at 1-800-THE LIFT
®
if any
of this information is not understood.
Power Operation
Page 5
UNFOLD
Just press any one of
the buttons like the
one pictured below
(or any interior
control switch). . .
1
2SHUDWLQJ<RXU1HZ
5DPSYDQ&RXOGQҋW
%H6LPSOHU
And the sliding door opens. . .
The ramp unfolds. . .
2
RAMPVAN OPERATION QUICK REFERENCE GUIDE
The rear suspension lowers. . .
3
Allowing easy entrance!
4 5
Press
and
UHOHDVH
this
switch.
Page 6
2QH7RXFK(OHFWURQLF&RQWURO
System: The Rampvan One-
Touch electronic control system
provides simple one-touch activa-
tion of all Rampvan power fea-
tures. For your convenience, the
control system can be activated
using the Toyota remote key-
less entry transmitter, any of the
interior mounted control switches
or the optional magnetic entry
(control switch photos and details
are provided on pages 10-13).
3RZHU3DVVHQJHU6LGH6OLGLQJ
Door: The One-Touch elec-
tronic control system activates the
Toyota passenger side power slide
door for ramp access. The slide
GRRUDQGORZHUHGÁRRUFRQÀJXUD-
tion provides 54-1/4" clear vertical
passageway. Note: The driver-
side sliding door is lowered to
provide clear passage also.
Ramp: Fully automatic power
ramp is available in 29 1/2" us-
able width.
(OHFWURPHFKDQLFDO3RZHU
.QHHOLQJ5HDU6XVSHQVLRQ
“Kneeling” is the lowering motion
of the electromechanical rear
suspension. The kneel feature
reduces the slope of the ramp
when deployed.
/RZHUHG)ORRUIURP5HDU$[OH
WR)LUHZDOO This feature pro-
vides additional headroom (59"
ÁRRUWRFHLOLQJDWFHQWHURIYDQ
and further reduces the slope of
the ramp when deployed. Car-
peting is featured throughout the
ORZHUHGÁRRUDUHD
Ground Effects: Exterior color-
matched ground effect panels con-
FHDOWKHORZHUHGÁRRUDQGORZHUHG
sliding doors.
)RUZDUG)DFLQJ:KHHOFKDLUDQG
2FFXSDQW%HOW7UDFN6\VWHP
One Forward-Facing Wheelchair
and Occupant Belt Kit is supplied
for the restraint of one wheelchair
and occupant. The belt kit is used
LQFRQMXQFWLRQZLWKWKHÁRRUWUDFN
Note: Additional belt kits can be
purchased (option).
FEATURES
Page 7
)ORRU7UDFNIRU:KHHOFKDLU
and Occupant Securement in
0LGSRLQW/RZHUHG)ORRU$UHD
Floor track provided in the mid-
SRLQWORZHUHGÁRRUDUHD3RVLWLRQ
C) can be utilized for restraint
of wheelchair passenger(s).
Wheelchair capacity at midpoint
may have limitations based
RQWKHGLPHQVLRQVRIVSHFLÀF
wheelchairs.
4XLFN5HOHDVH)URQW3DV-
VHQJHU6HDWZLWK)ORRU7UDFN
IRU:KHHOFKDLUDQG2FFXSDQW
Securement: The passenger
seat (Position B) is equipped
with quick-release seat attach-
ments (making seat removal and
installation procedures simple).
The seat can be removed and
the seat location can be utilized
E\DZKHHOFKDLURFFXSDQWÁRRU
track provided).
Driver Seat: For the wheel-
chair occupant who chooses
to drive the Rampvan, this
seat (Position A) can be
removed and adaptive driving
systems custom tailored for
the individual can be pur-
chased from and installed
by your local mobility dealer.
The driver’s seat is available
with quick-release seat at-
WDFKPHQWVÁRRUWRFHLO-
ing headroom is provided at
both front seating positions.
FEATURES
Available Wheelchair Positions
A
C
B
Midpoint
“L”
Track
Front
Seat
“L”
Track
Front
Seat
“L”
Track
Midpoint
“L”
Track
Page 8
All information contained
in this manual and
6DIHW\6\PEROV
SAFETY FIRST! Know That....
C
CAUTION
7KLVV\PEROLQGLFDWHV
important information
UHJDUGLQJKRZWR
avoid a hazardous
VLWXDWLRQWKDWFRXOG
UHVXOWLQPLQRUSHU-
VRQDOLQMXU\RU
SURSHUW\GDPDJH
A
supplements (if included), is pro-
vided for your safety. Familiarity
with proper operation instructions
as well as proper maintenance
procedures are necessary to en-
sure safe, trouble free operation.
Safety precautions are provided
to identify potentially hazardous
situations and provide instruction
on how to avoid them.
B
W
A
RNING
7KLVV\PEROLQGLFDWHV
important safety in-
IRUPDWLRQUHJDUGLQJD
SRWHQWLDOO\KD]DUGRXV
VLWXDWLRQWKDWFRXOG
UHVXOWLQVHULRXV
ERGLO\LQMXU\DQGRU
SURSHUW\GDPDJH
D
Note:$GGLWLRQDOLQIRUPDWLRQSURYLGHGWRKHOSFODULI\RUGHWDLODVSHFLÀFVXEMHFW
These symbols will appear throughout this manual and may appear on labels posted on your Rampvan.
5HFRJQL]HWKHVHULRXVQHVVRIWKLVLQIRUPDWLRQ
SAFETY PRECAUTIONS
Page 9
Whenever parking your Rampvan
and before utilizing Rampvan
features, always engage the ve-
hicle transmission in Park “P” and
engage the vehicle parking brake.
The vehicle transmission must
be engaged in Park “P,” before
operating the Rampvan automatic
features. Rampvan power func-
tion control switches cannot be
activated if the vehicle transmis-
sion is not in Park.
7HUPLQRORJ\
“Kneeling” is the lowering motion
of the Rampvan electromechanical
rear suspension. The term “De-
ploy” indicates the lowering motion
of the ramp to the deployed posi-
tion. “Stow” is the raising motion
of the ramp to the vertical (stowed)
position.
The terms “Open” and “Close”
refer to sequences of power func-
tions that will occur when acti-
vated by the One-Touch electronic
control system. When activating
the Open functions, the power
door opens, the kneel system
lowers the rear of the vehicle and
the ramp unfolds. When activating
Close functions, the ramp folds,
the kneel system raises the rear
of the vehicle and the power door
closes.
2QH7RXFK&RQWURO6\VWHP
Rampvan power functions are
managed by a One-Touch elec-
tronic control system. The control
system can be activated using the
Toyota remote keyless entry trans-
mitter or any one of the controls
addressed on pages 10-12.
Do not attempt to interface
aftermarket control systems.
OPERATION
Braun Corporation
$IWHUPDUNHW&RQWURO
6\VWHPV3ROLF\
The Braun Corporation manufac-
tures dedicated control systems
for its products. These control
systems have been designed
and tested for use in conjunction
ZLWKVSHFLÀF%UDXQSURGXFWV
Braun control systems are the
RQO\ control systems authorized
for use with Braun products.
Do not attempt to interface after-
market control systems without
authorization from The Braun
Corporation. To do so may
UHVXOWLQVHULRXVERGLO\LQMXU\
DQGRUSURSHUW\GDPDJH.
Page 10
OPERATION
&HQWHU&RQVROH6ZLWFK
For front seat passengers, a
switch is located on the driver
side of the center console.
&RQWURO6ZLWFKHV
For your convenience, the
Rampvan One-Touch electronic
control system can be activated
using the Toyota remote keyless
entry transmitter, any of the in-
terior-mounted control switches
or the optional magnetic entry
(details follow).
2QH7RXFK&RQWURO$FWLYDWLRQ
Rampvan power door, ramp and
kneel functions are activated by
SUHVVLQJDQGUHOHDVLQJ any
VSHFLÀHGFRQWUROVZLWFK
Note: The Slide Door Off
switch must be in the raised
position to activate Rampvan
power functions (see page 12).
Using the Toyota remote entry
transmitter eliminates the need
for an additional remote control.
Toyota
Remote
Keyless
Entry
Transmitter
5HPRWH.H\OHVV(QWU\
Transmitter
Press and
UHOHDVH this
switch.
Press and
UHOHDVH this
switch.
PWR
DOOR
Page 11
OPERATION
&3LOODU6ZLWFK
A switch is located on the wall
panel behind the passenger
side slide door (C-pillar).
%3LOODU6ZLWFK
A switch is located on the wall
panel ahead of the passenger
side slide door (B-pillar).
2YHUKHDG&RQVROH6ZLWFK
For front seat passengers, a
control switch is located in the
overhead console.
Press and
UHOHDVH this
switch.
PWR
DOOR
Press and
UHOHDVH this
switch.
PWR
DOOR
Press and
UHOHDVH this
switch.
Page 12
OPERATION
.QHHO2Q2II6ZLWFK
The Kneel On/Off switch is locat-
ed on the driver side of the center
console. The Kneel On/Off switch
turns the kneel system on and off
RQO\. The kneel switch must be
in the ON position in order for the
kneeling system to be activated.
Press this switch to ON
to activate kneel feature.
Press this switch to OFF
to disable kneel feature.
6OLGH'RRU2II6ZLWFK
The override switch is located
on the driver lower left knee
bolster. Pressing this switch
in disables Rampvan power
functions. Pressing the switch
again and returning it to the
out position (button raised with
orange band visible) enables
Rampvan power functions.
Switch OUT:
Power
Functions
Enabled
Switch IN:
Power
Functions
Disabled
Page 13
OPERATION
Passenger Side
Taillight Assembly
Magnet Tip Keychain Magnet
OPEN / CLOSE
2
8013
O
PEN /
CL
O
SE
2
8
0
1
3
Align Tip with
Magnetic Switch
0DJQHWLF(QWU\
The magnetic entry is offered as an
option. A magnetic switch is built
into the rear passenger-side taillight
assembly. The switch is labeled
OPEN/CLOSE.
A keychain-style magnet is supplied
for switch activation (see photo at
right). Simply align the magnet tip
ZLWKWKHVZLWFKWDUJHWLGHQWLÀHGZLWK
decal 28013) and Entervan power
door, ramp and kneel functions will
be activated.
When activating the Open functions
using the magnetic entry, there is ap-
proximately a RQHVHFRQGGHOD\EH-
fore the Rampvan Open sequence is
activated. The One-Touch electronic
control system unlocks all vehicle
doors before activating Rampvan
power functions.
Page 14
If a control switch is pressed while
the door is closing, the door will
continue to the closed position.
If the slide door outside handle or
the interior latch is pulled while the
door is opening, the door reverses
direction and returns to the closed
position.
If the slide door outside handle or
the interior latch is pulled while the
door is closing, the door reverses
direction and returns to the open
position.
Once the Open sequence is com-
plete (door is fully open and ramp
is deployed), press and release a
control switch to close the door.
The ramp stows and the door will
close as the vehicle raises to com-
plete the Close sequence.
If a control switch is pressed and
released while the door is open-
ing, the door will reverse direction
and return to the closed position.
The passenger side power slid-
ing door may be opened using
the Rampvan One-Touch Con-
trol System or it may be opened
manually. Press and release the
remote keyless entry transmitter,
any one of the interior-mounted
control switches or the optional
magnetic entry to activate the
door. When a control switch is
pressed, the door will open and
the Open sequence will con-
tinue.
5DPS$FFHVV6OLGLQJ'RRU
OPERATION
Page 15
OPERATION
Power Door Safety Sensor: If
the power door is obstructed
while opening or closing, the door
will reverse direction, provided it
PHHWVVXIÀFLHQWUHVLVWDQFH,IDQ
obstruction is encountered while
the door is closing, the door opens
fully and stops. Press a control
switch again and the door closes.
Keep clear of the area in which the
power door operates.
Ensure door travel path is clear.
Be sure the door is fully closed
and latched before driving.
W
A
RNING
.HHSFOHDURIDUHD
in which power door
operates. )DLOXUHWR
GRVRPD\UHVXOWLQ
ERGLO\LQMXU\DQGRU
SURSHUW\GDPDJH
3RZHU'RRU0DQXDO2SHUDWLRQ
In event of power or equipment
failure, unlock the passenger side
sliding door. Open the slide door
from inside or outside using the
OEM door handles.
Note: Using excessive force or
speed when opening or closing
the door may cause damage to
the vehicle and may cause the
door to dislodge from its roller
tracks.
Page 16
OPERATION
$XWRPDWLF.QHHO6\VWHP
Kneeling is the lowering motion of
the Rampvan electro-mechanical
rear suspension. The kneel sys-
tem lowers the rear of the vehicle.
Lowering the rear of the vehicle
reduces the slope of the ramp.
.QHHO2Q2II)HDWXUHA Kneel
On/Off feature is incorporated into
the One-Touch electronic control
system. This feature provides
the option of kneeling the ve-
hicle when operating the power
door and power ramp. The Kneel
On/Off switch must be in the ON
position in order for the kneeling
system to be activated (see photo
at right). See page 12 for addi-
tional Kneel On/Off switch details.
The kneel system is automatically
activated by the One-Touch elec-
tronic control system.
When a control switch is pressed
to start the Open functions, the
power door opens, the kneel sys-
tem lowers the rear of the vehicle
and the ramp deploys.
When the Close functions are acti-
vated, the vehicle starts to raise at
the same time the ramp starts to
retract (stow).
Note: If the Rampvan is in the
kneeled position and the vehicle
is shifted out of Park, the vehicle
will raise and you will hear a very
rapid pulsing tone (cricket tone).
Press this switch to ON
to enable kneel feature.
Press this switch to OFF
to disable kneel feature.
.QHHO
2Q2II
Switch
Note: If the Rampvan is in the
kneeled position and the Close
functions are activated, the vehicle
will raise whether the Kneel On/Off
switch is on or off.
Page 17
OPERATION
.QHHO2YHUULGH)HDWXUHV
In the event the Rampvan is in the
kneeled position and you experi-
ence power or equipment failure,
an electrical override and a me-
chanical override are available to
raise the rear of the vehicle. The
vehicle cannot be lowered using
override features.
Use the Electrical Override Switch
if possible (details at right). The
rear of the vehicle can be raised
using the mechanical override
if there is an electrical problem
(manual procedures). See Kneel
Mechanical Override on next page.
Do not drive the Rampvan with the
rear of the vehicle in the lowered
position. Attempting to do so will
result in an extremely rough and
unstable ride.
In the event of a kneel system
failure, have the kneel system
repaired immediately. Contact
your sales representative or
call The Braun Corporation at
1-800-THE LIFT
®
. One of our
national Product Support rep-
resentatives will direct you to
an authorized service center.
.QHHO(OHFWULFDO2YHUULGH
The Kneel Override is avail-
able to electrically power the
kneel system direct (by-pass-
ing the electronic control
system). The Kneel Override
Switch is located on the pas-
senger side C-pillar (rear of
the slide door).
Press and hold the switch to re-
lease the kneel system (raise ve-
hicle). Release the switch when
the rear of the Rampvan has
raised fully. The kneel actuator
motor will ratchet (make clicking
sound).
3UHVVDQGKROG this switch to
release kneel (raise vehicle).
Kneel Override Switch
Page 18
OPERATION
.QHHO0HFKDQLFDO2YHUULGH
In the event the Rampvan is in the
kneeled position and you experi-
ence a kneel system failure, use
the electrical override feature to
raise the rear of the vehicle if possi-
ble. If the kneel system cannot be
released using the electrical over-
ride, follow the kneel mechanical
override procedures outlined here.
Note: Although the mechanical
override feature is available to
raise the rear vehicle, mechani-
cal (manual) procedures cannot
EHDFFRPSOLVKHGUDSLGO\. Avoid
driving the Rampvan and have the
kneel system repaired immediately.
The kneel mechanical override fea-
ture allows the rear of the vehicle to
be raised to the normal position.
The kneel actuator assembly
is located under the third row
seat (driver side). A metal cover
protects the kneel assembly. The
motor end of the electric actuator
is visible in the access hole pro-
YLGHGLQWKHÁRRUPRXQWHGFRYHU
Use the wrench provided with the
Rampvan to turn the release nut
(release kneel system). Turn the
wrench as shown (toward front of
vehicle).
Use the Kneel Mechanical Over-
rideRQO\if the vehicle will not
raise electrically. Ensure the
Kneel On/Off switch is Off until
a service technician checks the
suspension system.
Kneel System Cover
Front
Kneel Motor Release Nut
Rear
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Braun 32899 Rev A Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues