Senix PDIX2-M2 Manuel utilisateur

CORDLESS SCREWDRIVER

Operator’s manual

Model:PDIX2-M2

PDIX2-M2-0

For customer support, please call 1-800-261-3981 or send email to:

[email protected]

SAVE THIS MANUAL FOR FUTURE REFERENCE.

ORIGINAL INSTRUCTIONS

TM

EN - 2 WWW.SENIXTOOLS.COM

TABLE OF CONTENTS

SAFETY & INTERNATIONAL SYMBOLS ..................................................................................................................................2

SAFETY INSTRUCTIONS..........................................................................................................................................................3

KNOW YOUR UNIT...................................................................................................................................................................10

SPECIFICATIONS*...................................................................................................................................................................11

ASSEMBLY...............................................................................................................................................................................12

OPERATION.............................................................................................................................................................................14

MAINTENANCE........................................................................................................................................................................17

TROUBLESHOOTING..............................................................................................................................................................18

WARRANTY..............................................................................................................................................................................19

Caution / Warning.

To reduce the risk of injury, user must read

instruction manual.

Wear eye protection.

Wear a dust mask.

Wear safety footwear.

Wear protective gloves.

Do not dispose of battery packs in rivers or

immerse in water.

Do not dispose of battery packs in fire. They

will explode and cause injury.

Use and store the battery within an temperature

below 122°F(50°C).

Do not disassemble, crush, heat above

212°F(100°C); Never expose the battery to

microwaves or high pressures.

Keep bystanders a safe distance away from

the work area.

Indoor use only. Only use battery charger

indoors.

SAFETY & INTERNATIONAL SYMBOLS

Explanation of Safety & international symbols describes safety and international symbols and pictographs that may appear on

this product. Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information.

3 - ENWWW.SENIXTOOLS.COM

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING!

Read all safety warnings,

instructions, illustrations and

specifications, provided with this

power tool. Failure to follow all

instructions listed below may result

in electric shock, fire and/or serious

injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the

warnings refers to your mains-

operated (corded) power tool or

battery-operated (cordless) power

tool.

1) Work Area Safety

a) Keep work area clean and well

lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools

in explosive atmospheres,

such as in the presence of

flammable liquids, gases or

dust. Power tools create sparks

which may ignite the dust or

fumes.

c) Keep children and bystanders

away while operating a power

tool. Distractions can cause you

to lose control.

2) Electrical Safety

a) Power tool plugs must match

the outlet. Never modify the

plug in any way. Do not use

any adapter plugs with earthed

(grounded) power tools.

Unmodified plugs and matching

outlets will reduce risk of electric

shock.

b) Avoid body contact with

earthed or grounded surfaces,

such as pipes, radiators,

ranges and refrigerators. There

is an increased risk of electric

shock if your body is earthed or

grounded.

c) Do not expose power tools

to rain or wet conditions.

Water entering a power tool

will increase the risk of electric

shock.

d) Do not abuse the cord. Never

use the cord for carrying,

pulling or unplugging the

power tool. Keep cord away

from heat, oil, sharp edges

or moving parts. Damaged or

entangled cords increase the risk

of electric shock.

e) When operating a power tool

outdoors, use an extension

cord suitable for outdoor

use. Use of a cord suitable for

SAFETY INSTRUCTIONS

EN - 4 WWW.SENIXTOOLS.COM

with your finger on the switch or

energising power tools that have

the switch on invites accidents.

d) Remove any adjusting key

or wrench before turning the

power tool on. A wrench or a

key left attached to a rotating

part of the power tool may result

in personal injury.

e) Do not overreach. Keep

proper footing and balance at

all times. This enables better

control of the power tool in

unexpected situations.

f) Dress properly. Do not wear

loose clothing or jewellery.

Keep your hair and clothing

away from moving parts. Loose

clothes, jewellery or long hair

can be caught in moving parts.

g) If devices are provided for the

connection of dust extraction

and collection facilities,

ensure these are connected

and properly used. Use of

dust collection can reduce dust-

related hazards.

h) Do not let familiarity gained

from frequent use of tools

allow you to become

complacent and ignore tool

safety principles. A careless

action can cause severe injury

within a fraction of a second.

outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a

damp location is unavoidable,

use a residual current device

(RCD) protected supply. Use

of an RCD reduces the risk of

electric shock.

3) Personal Safety

a) Stay alert, watch what you

are doing and use common

sense when operating a power

tool. Do not use a power tool

while you are tired or under

the influence of drugs, alcohol

or medication. A moment of

inattention while operating

power tools may result in serious

personal injury.

b) Use personal protective

equipment. Always wear

eye protection. Protective

equipment such as a dust mask,

non-skid safety shoes, hard

hat or hearing protection used

for appropriate conditions will

reduce personal injuries.

c) Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to

power source and/or battery

pack, picking up or carrying

the tool. Carrying power tools

5 - ENWWW.SENIXTOOLS.COM

4) Power Tool Use And Care

a) Do not force the power tool.

Use the correct power tool for

your application. The correct

power tool will do the job better

and safer at the rate for which it

was designed.

b) Do not use the power tool if

the switch does not turn it on

and off. Any power tool that

cannot be controlled with the

switch is dangerous and must be

repaired.

c) Disconnect the plug from the

power source and/or remove

the battery pack, if detachable,

from the power tool before

making any adjustments,

changing accessories, or

storing power tools. Such

preventive safety measures

reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of

the reach of children and do

not allow persons unfamiliar

with the power tool or these

instructions to operate the

power tool. Power tools are

dangerous in the hands of

untrained users.

e) Maintain power tools and

accessories. Check for

misalignment or binding of

moving parts, breakage of

parts and any other condition

that may affect the power

tool’s operation. If damaged,

have the power tool repaired

before use. Many accidents are

caused by poorly maintained

power tools.

f) Keep cutting tools sharp and

clean. Properly maintained

cutting tools with sharp cutting

edges are less likely to bind and

are easier to control.

g) Use the power tool,

accessories and tool bits

etc. in accordance with

these instructions, taking

into account the working

conditions and the work to be

performed. Use of the power

tool for operations different from

those intended could result in a

hazardous situation.

h) Keep handles and grasping

surfaces dry, clean and free

from oil and grease. Slippery

handles and grasping surfaces

do not allow for safe handling

and control of the tool in

unexpected situations.

5) Battery Tool Use And Care

a) Recharge only with the

charger specified by the

EN - 6 WWW.SENIXTOOLS.COM

in fire, explosion or risk of injury.

f) Do not expose a battery pack

or tool to fire or excessive

temperature. Exposure to fire or

temperature above 266°F(130

°C) may cause explosion.

g) Follow all charging

instructions and do not

charge the battery pack or tool

outside the temperature range

specified in the instructions.

Charging improperly or at

temperatures outside the

specified range may damage the

battery and increase the risk of

fire.

6) Service

a) Have your power tool

serviced by a qualified repair

person using only identical

replacement parts. This will

ensure that the safety of the

power tool is maintained.

b) Never service damaged battery

packs. Service of battery packs

should only be performed by

the manufacturer or authorized

service providers.

SAFETY RULES FOR

SCREWDRIVER

a) Hold power tools by insulated

gripping surfaces, when

manufacturer. A charger that is

suitable for one type of battery

pack may create a risk of fire

when used with another battery

pack.

b) Use power tools only with

specifically designated battery

packs. Use of any other battery

packs may create a risk of injury

and fire.

c) When battery pack is not in

use, keep it away from other

metal objects, like paper clips,

coins, keys, nails, screws or

other small metal objects,

that can make a connection

from one terminal to another.

Shorting the battery terminals

together may cause burns or a

fire.

d) Under abusive conditions,

liquid may be ejected from

the battery; avoid contact. If

contact accidentally occurs,

flush with water. If liquid

contacts eyes, additionally

seek medical help. Liquid

ejected from the battery may

cause irritation or burns.

e) Do not use a battery pack

or tool that is damaged

or modified. Damaged or

modified batteries may exhibit

unpredictable behaviour resulting

7 - ENWWW.SENIXTOOLS.COM

performing an operation where

the fastener may contact

hidden wiring. Fasteners

contacting a ″live″ wire will make

exposed metal parts of the

power tool ″live″ and could give

the operator an electric shock.

b) Maintain labels and

nameplates on the tool.

These carry important safety

information.

c) Avoid unintentional starting.

Prepare to begin work before

turning on the tool.

d) Do not lay the tool down until

it has come to a complete

stop. Moving parts can grab the

surface and pull the tool out of

your control.

e) When using a handheld power

tool, maintain a firm grip on

the tool with both hands to

resist starting torque.

f) Do not leave the tool

unattended when the battery

pack is connected. Turn off

the tool, and remove the battery

pack before leaving.

g) This product is not a toy. Keep

it out of reach of children.

SAFETY WARNING FOR BATTERY

PACK AND BATTERY CHARGER

• Recharge only with the charger

specified by the manufacturer. A

charger that is suitable for one

type of battery pack may create

a risk of fire when used with

another battery pack.

• Use appliances only with

specifically designated battery

packs. Use of any other battery

packs may create a risk of injury

and fire.

WARNING!

Use only the following type and size

battery: B25X2/B50X2.

• When battery pack is not in use,

keep it away from other metal

objects, like paper clips, coins,

keys, nails, screws or other small

metal objects, that can make a

connection from one terminal

to another. Shorting the battery

terminals together may cause

burns or a fire.

• Under abusive conditions,

liquid may be ejected from the

battery; avoid contact. If contact

accidentally occurs, flush with

water. If liquid contacts eyes,

additionally seek medical help.

Liquid ejected from the battery

may cause irritation or burns.

(This advice is considered

correct for conventional NiMh,

EN - 8 WWW.SENIXTOOLS.COM

VIBRATION + NOISE REDUCTION

To reduce the impact of noise and

vibration emission, limit the time of

operation, use low-vibration and low-

noise operating modes as well as

wear personal protective equipment.

Take the following points into

account to minimise the vibration

and noise exposure risks.

• Only use the product as

intended by its design and these

instructions.

• Ensure that the product is

in good condition and well

maintained.

• Use correct attachments for the

product and ensure they are in

good condition.

• Keep tight grip on the handles/

grip surface.

• Maintain this product in

accordance with these

instructions and keep it well

lubricated (where appropriate).

• Plan your work schedule to

spread any high vibration tool

use across a longer period of

time.

EMERGENCY

Familiarize yourself with the use

of this product by means of this

instruction manual. Memorize the

safety directions and follow them to

NiCd, lead acid and lithium-

ion cell types. If this advice

is incorrect for a cell design

that differs from these, then

the correct advice may be

substituted.)

• Do not use a battery pack or

appliance that is damaged

or modified. Damaged or

modified batteries may exhibit

unpredictable behavior resulting

in fire, explosion or risk of injury.

• Do not expose a battery pack or

appliance to fire or excessive

temperature. Exposure to

fire or temperature above

266°F(130°C) may cause

explosion.

• Follow all charging instructions

and do not charge the battery

pack or appliance outside of

the temperature range specified

in the instructions. Charging

improperly or at temperatures

outside of the specified range

may damage the battery and

increase the risk of fire.

• Do not modify or attempt to repair

the appliance or the battery

pack (as applicable) except as

indicated in the instructions for

use and care.

9 - ENWWW.SENIXTOOLS.COM

the letter. This will help to prevent

risks and hazards.

• Always be alert when using

this product, so that you can

recognize and handle risks early.

Fast intervention can prevent

serious injury and damage to

property.

• Switch off the product and

remove the battery pack if there

are malfunctions. Have the

product checked by a qualified

professional and repaired, if

necessary, before you operate it

again.

EN - 10 WWW.SENIXTOOLS.COM

KNOW YOUR UNIT

APPLICATIONS

Model: PDIX2-M2

As a cordless screwdriver:

Driving in or loosening screws and bolts.

NOTE:

PDIX2-M2-0 does not include charger and battery pack.

1

2

3

4

5

6

7

8

9

10

1. Chuck

2. Bit

3. Work Light

4. Switch Trigger

5. Control Panel

6. Unlock Button

7. Battery Pack

8. Belt Clip

9. Handle

10. Direction Selector

11 - ENWWW.SENIXTOOLS.COM

SPECIFICATIONS*

Model PDIX2-M2

Rated Voltage 20V (Max)

No Load Speed 0-1100/0-2100/

0-3000/0-3300rpm

Impact per minute 0-1100/0-2600/

0-3600/0-3800 IPM

Max. Fastening Torque 133 ft.Ibs

Driving Shank 1/4" Hex

Fastening Capacities

Machine Screw 5/32 " – 5/16 "

Standard Bolt 3/16 "- 5/8 "

High Tensile Bolt 3/16 "- 1/2 "

Weight(without battery) 1.98 lbs

Battery model B25X2 B50X2

Rated voltage 20V (Max) 20V (Max)

Rated capacity 2.5Ah 5.0Ah

Weight 0.74lbs 1.43lbs

Charger model CHX2

Rated input 100-240 V ~ 50/60 Hz

Rated output 21V, 2000 mA

Charging time

(with 2.5 Ah battery) 85 mins

Charging time

(with 5.0 Ah battery) 130 mins

Protection class

(for charger) / II

Weight 0.75 lbs

Model PDIX2-M2-0

Rated Voltage 20V (Max)

No Load Speed 0-1100/0-2100/

0-3000/0-3300rpm

Impact per minute 0-1100/0-2600/

0-3600/0-3800 IPM

Max. Fastening Torque 133 ft.Ibs

Driving Shank 1/4" Hex

Fastening Capacities

Machine Screw 5/32 " – 5/16 "

Standard Bolt 3/16 "- 5/8 "

High Tensile Bolt 3/16 "- 1/2 "

Weight(without battery) 1.98 lbs

Battery model Not included

Charger model Not included

EN - 12 WWW.SENIXTOOLS.COM

ASSEMBLY

1. Unpack all parts and lay them on a flat, stable surface:

2. Remove all packing materials and shipping devices, if

applicable.

3. The scope of delivery varies depending on the country

and purchased variant:

Model of PDIX2-M2

• Screwdriver x1

• Driver bit x1

• Belt clip x1

• Screw x1

• Battery pack x1

• Charger x1

• Instruction manual x1

4. If you find that parts are missing or show damage do

not use the product but contact your dealer. Using an

incomplete or damaged product represents a hazard to

people and property.

5. Ensure that you have all the accessories and tools

needed for assembly and operation. This also includes

suitable personal protective equipment.

NOTE:

PDIX2-M2 includes charger and battery pack.

PDIX2-M2-0 does not include charger and battery pack.

WARNING:

Wear protective gloves for this assembly work

and always lay the product on a flat and stable

surface while assembling.

Follow the assembly instructions step-by-step

and use the pictures provided as a visual guide

to easily assemble the product!

Do not insert the battery pack before the power

tool is completely assembled or adjusted!

BELT CLIP

Secure the belt clip on the tool by a screw.

DRIVER BIT

WARNING:

Observe the technical requirements of this

product (see section "SPECIFICATIONS") when

purchasing and using application tools (e.g.

adapter for wrench socket or screwdriver bits).

Always use suitable application tool according to

the intended use.

Always hold the product firmly in the hand while

assembling application tool.

To install:

Pull the collar froward and insert a suitable bit as far as

possible into the chuck. Release the collar then the chuck

will rmly hold the bit in place. Pull the bit outward to make

sure it is secured.

Collar

13 - ENWWW.SENIXTOOLS.COM

To remove:

Pull the collar forward, remove the bit from chuck then

release the collar.

Collar

NOTE:

Make sure the bit is xed rmly and will never comes out

before use.

BATTERY PACK

NOTE:

Prior to installation, lock the switch trigger by trigger lock to

avoid unintentional start.

To install:

Align and slide the battery pack to the docking port until it is

locked in place.

To remove:

Press the unlock button on battery pack and slide the

battery pack out.

Unlock Button

EN - 14 WWW.SENIXTOOLS.COM

OPERATION

WARNING:

Always wear eye, hearing, hand protection to

reduce the risk of injury when operating the

tool. Keep all parts of your body away from the

rotating bit.

RUNNING DIRECTION

The tool is designed to loosen or tighten bolts/nuts. Press

the direction selector to achieve different using purposes.

WARNING:

Do not change direction of rotation while chuck

is rotating.

Mode Setting Application

Forward Shift to left side Drilling/tightening

screw

Reverse Shift to right side Loosening jammed

drill bit or screw

Center Lock Shift to middle

position Locking the trigger

Forward

Reverse

NOTE:

When changing bits or when the tool is not in use, the

direction selector shall be kept in "locking" position to avoid

unintended start.

SWITCH TRIGGER

Press the switch trigger to start tool. The further you push,

the higher speed will reach. Release the trigger to stop tool.

ROTATION SPEED

Different rotation speed can be realized by pressing the

button 1 on control panel. Find details in below table.

Press time Indicator Speed

Once 0-1100r/min

Twice 0-2100r/min

Three times 0-3000r/min

Four times 0-3300r/min

NOTE:

The tool will keep the latest setting after restart or battery

reinstallation.

15 - ENWWW.SENIXTOOLS.COM

WORK LIGHT

The driver is designed with a work light controlled by button

2 for providing sufcient brightness around driving bit.

REVERSAL AUTO STOP

Press the button 3 to enable or disable auto stop under

the reverse mode. The indicator shows green when it is

activated and the tool stops automatically after bolts/nuts

get enough loosened for preventing bolts/nuts from falling

off.

NOTE:

Reversal auto stop only can be turned on when the tool is

used for loosing purpose.

HOW TO CHARGE THE BATTERY

PACK

WARNING:

This Lithium-Ion battery pack is shipped partially

charged. Fully charge the battery pack before

using it for the first time.

NOTE:

Charging batteries at a ambient temperature of 32°F(0°C)-

104°F(40°C).

1. Charge the Lithium-Ion battery pack only with the

correct charger.

2. Connect the charger to a power supply, the light

indicator of the charger turns red.

3. Align the raised ribs of the battery pack with the slot in

the charger.

4. Insert the battery pack into the charger, the light

indicator of the charger turns green and it ashes.

5. The charger will communicate with the battery pack to

evaluate the condition of the battery pack.

6. It is fully charged that the four lights of the battery turn

on. Disconnect the power supply from the charger.

Remove battery pack from the charger.

EN - 16 WWW.SENIXTOOLS.COM

CHARGING INDICATOR

Press the light button on the battery pack to check whether

it needs to charge.

Light Button Indicator

Lights

Status

Lighted Off Blinking

The battery is at full

capacity.

The battery is at 75%

capacity.

The battery is at 50%

capacity and requires

charging.

The battery is at 25%

capacity and requires

charging soon.

The battery is less than

5% capacity and requires

charging immediately.

WARNING:

Malfunctions may occur when the four lights

blinking in turns.

OVERHEAT PROTECTION

When the tool/battery is overheated, the tool stops

automatically. In this situation, let the power tool/battery cool

before turning the tool on again.

OVERDISCHARGE PROTECTION

When the battery capacity is not enough, the tool stops

automatically. In this case, remove the battery from the tool

and charge the battery.

WORKPIECE AND WORK AREA

SET UP

1. Designate a work area that is clean and well lit. The

work area must not allow access by children or pets to

prevent distraction and injury.

2. Secure loose workpieces using a vise or clamps (not

included) to prevent movement while working.

3. There must not be objects, such as utility lines,nearby

that will present a hazard while working.

PRACTICAL ADVICES

1. Ensure that correct application tool is tted and all

controls are set in correction position.

2. Always hold the product perpendicular to the workpiece.

Holding it at an angle may cause slipping, jamming or

damage of application tool, screw/bolt and workpiece.

3. Always place the application tool in position before

switching the product on.

4. Start with low speed until the screw penetrates

workpiece perpendicularly or bolt is tted along the

thread properly.

5. Before screwing larger, longer screws into hard

materials, it is advisable to pre-drill a pilot hole with the

core diameter of the thread to the entire screw length.

6. Apply proper feeding force to keep the connect of bit/

socket and screw/bolt/nut. Too big feeding force will not

increase working effectiveness but increase the risk of

loss of control and heating of screw/bolt.

7. If the screw/bolt gets stuck in the workpiece, switch

the power tool off, switch to reverse rotation mode and

press the switch trigger slightly to loosen the screw/bolt.

8. Check the application tool regularly during work. Ret or

replace it if necessary.

WARNING:

Do not use the power tool like a hand screw

driver or wrench, this could damage the spindle

lock in the power tool.

17 - ENWWW.SENIXTOOLS.COM

MAINTENANCE

WARNING:

Only perform cleaning and maintenance work

according to these instructions!

All further works must be performed by a

qualified specialist!

WARNING:

TO PREVENT SERIOUS INJURY FROM

ACCIDENTAL OPERATION: Make sure the

trigger is locked and battery pack is removed

before performing any procedure in this section.

TO PREVENT SERIOUS INJURY FROM TOOL

FAILURE: Do not use damaged equipments.

If abnormal noise or vibration occurs, have the

problem corrected before further use.

There are no user-serviceable parts in your power tool.

If any of following condition are found, stop using it and

send it to the authorized service center for repair.

• leaking, swollen, or cracked battery pack

• loose hardware

• misalignment or binding of accessories.

• cracked or broken parts.

• any other condition that may affect its safe operation.

CLEANING

1. Clean dust and debris from air vents.

2. Keep handle clean, dry and free of oil or grease.

3. Make sure the chuck is not clogged with debris.

4. Remove stubborn dirt from housing with high pressure

air (max. 3 bar).

NOTE:

Do not use chemical, alkaline, abrasive or other aggressive

detergents or disinfectants to clean this product as they

might be harmful to its surfaces.

TRANSPORTATION

1. Only carry by its handle.

2. Protect from any heavy impact or strong vibrations

which may occur during transportation in vehicles.

3. Secure to prevent it from slipping or falling over.

STORAGE

1. Clean thoroughly as described above.

2. Store in a dark, dry, frost-free and well-ventilated area

that is inaccessible to children. The ideal storage

temperature is between 50°F(10°C) and 86°F(30°C).

3. Use original package for storage or cover with a suitable

cloth to protect it against dust.

NOTE:

To prolong battery life, store the battery pack separately

from the tool in a 30%-50% charged condition. It's

recommended to have your battery pack charged at least

every 6 months.

DISPOSAL

Waste product should not be disposed of with

household waste. Please recycle where facilities exist.

Check with your local authority or retailer for recycling

advice.

Debris or dust may produced by the tool during operation,

users should clean these objects to protect environment.

Electrical products should not be discarded with

household products. Used electrical products

must be collected separately and disposed of at

collection points provided for this purpose. Talk

with your local authorities or dealer for advice

on recycling.

EN - 18 WWW.SENIXTOOLS.COM

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the users can x themselves. Therefore, check the product using this

section. In most cases the problem can be solved quickly.

PROBLEM POSSIBLE CAUSE SOLUTION

Product does not start

Direction selector at center lock position Push direction selector to proper side

Battery pack is not properly attached Attach properly

Battery pack is completely discharged Charge the battery pack

Product does not reach

full power

Battery pack power is too low Charge the battery pack

Battery pack reaches its life cycle Replace with new battery pack

Unsatisfactory result

Drill/driver bit is dull/damaged Replace with new one

Driver bit/ socket bit is not suitable for intended

operation Use proper one

19 - ENWWW.SENIXTOOLS.COM

WARRANTY

LIMITED WARRANTY

5-year limited warranty on all Senix X2 series outdoor battery powered equipment and charger. 3-year limited warranty on

all Senix X2 batteries.*

FOR FIVE YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or

workmanship on power tools and chargers. Defective product will receive free repair.*

FOR THREE YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or

workmanship on batteries. Defective product will receive free repair.*

This warranty does not cover normal wear of parts and components such as cutting chain, line or blades nor does this

warranty cover product transportation cost for warranty or service.

Warranty is subject to the following conditions:

• Warranty applies to the original purchaser at retail and is not transferrable*

• Warranty Registration at www.senixtools.com

• The tool has not been misused, abused, neglected, altered, modied or repaired by anyone other than an authorized

service center

• Only genuine Senix accessories have been used with or on this product

• The tool has been subjected to normal wear and tear

• The tool has not been used for trade or professional purposes

• The tool has not been used for rental purposes

• This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect

resulting from misuse, abuse (including overloading the product, exposure to water or rain) accidents, neglect or lack of

proper installation and improper maintenance or storage.

To locate your nearest Senix service provider call toll free at 800-261-3981 or email us at [email protected].

Additional Limitations

Any implied warranty granted under state law, including warranties of merchantability or tness for a particular purpose,

are limited to three years from the date of purchase on power tools and chargers and seven years on batteries. The

manufacturer is not responsible for direct, indirect, incidental or consequential damages. Some states and provinces do not

allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages,

so the above limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and you may also

have other rights which vary from state to state or province to province.

The YAT USA declines any responsibility in regard to civil liability arising from abusive use or not in conformity with proper

use and maintenance of the machine as described in the operator’s manual.

YAT USA is not responsible for direct, indirect, incidental or consequential damages.

After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator’s manual

before using the machine.

*Original purchase receipt may be required for proof of purchase

For customer service contact us toll free at 1-800-261-3981 or Senixtools.com.

YAT USA, Inc. 10506 Bryton Corporate Center Dr, #500 Huntersville, NC 28078

DESTORNILLADOR INALÁMBRICO

Manual del operador

Modelo:PDIX2-M2

PDIX2-M2-0

Para el servicio de atención al cliente, llame al 1-800-261-3981 o envíe un email a:

[email protected]

GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS.

INSTRUCCIONES ORIGINALES

TM

La page charge ...

Senix PDIX2-M2 Manuel utilisateur

Senix PDIX2-M2 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents