Senix BLX2-M Manuel utilisateur

Marque: Senix

Modèle: BLX2-M

Taper: Manuel utilisateur

20V MAX LITHIUM ION

CORDLESS BLOWER

Operator’s manual

Model: BLX2-M

BLX2-M-0

For customer support, please call 1-800-261-3981 or send email to:

[email protected]

SAVE THIS MANUAL FOR FUTURE REFERENCE.

ORIGINAL INSTRUCTIONS

EN - 2 WWW.SENIXTOOLS.COM

1234

WWW.SENIXTOOLS.COM 3 - EN

Light Button

Unlock Button

LED Light

Speed Control Button

On/Off Switch

EN - 4 WWW.SENIXTOOLS.COM

TABLE OF CONTENTS

SAFETY & INTERNATIONAL SYMBOLS ......................... 4

SAFETY INSTRUCTIONS ................................................. 5

KNOW YOUR UNIT ......................................................... 10

SPECIFICATIONS* ......................................................... 10

ASSEMBLY ......................................................................11

OPERATION .....................................................................11

MAINTENANCE .............................................................. 13

TROUBLESHOOTING .................................................... 14

PARTS ............................................................................. 15

WARRANTY .................................................................... 16

SAFETY & INTERNATIONAL

SYMBOLS

Explanation of safety & international symbols describes

safety and international symbols and pictographs that may

appear on this product. Read the operator’s manual for

complete safety, assembly, operating and maintenance and

repair information.

Caution / Warning.

To reduce the risk of injury, user must read

instruction manual.

Wear eye protection.

Wear hearing protection.

Wear respiratory protection.

Wear protective gloves.

Wear Sturdy, non-slip footwear.

Do not use in rain or wet conditions.

Keep bystanders a safe distance away from

the work area.

Thrown objects can ricochet and result in

personal injury or property damage.

Rotating blades. Keep hands and feet away

from the openings, while the machine is

running.

Do not dispose of battery packs in rivers or

immerse in water.

Do not dispose of battery packs in fire. They

will explode and cause injury.

Use and store the battery within an temperature

below 122°F(50°C).

Do not disassemble, crush, heat above

212°F(100°C); Never expose the battery to

microwaves or high pressures.

Indoor use only. Only use battery charger

indoors.

WWW.SENIXTOOLS.COM 5 - EN

SAFETY INSTRUCTIONS

WARNING!

This product can expose you to

chemicals including lead, a chemical

known to the State of California to

cause cancer and birth defects or

other reproductive harm. For more

information go to www.P65Warnings.

ca.gov.

WARNING!

Some dust created by power

sanding, sawing, grinding, drilling

and other construction activities

contains chemicals known to the

state of California to cause cancer,

birth defects or other reproductive

harm.Some examples of these

chemicals are:

Lead from lead-based paints,

Crystalline silica from bricks and

cement and other masonry products

and Arsenic and chromium from

chemically treated lumber.

Your risk from these exposures

varies, depending on how often you

do this type of work. To reduce your

exposure to these chemical:

Work in a well ventilated area,

And work with approved safety

equipment,such as those dust

masks that are specially designed to

lter out microscopic particles.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING!

When using electric gardening

appliances, basic safety precautions

should always be followed to

reduce risk of re, electric shock,

and personal injury, including the

following:

SAVE THESE INSTRUCTIONS AND

REVIEW FREQUENTLY PRIOR

TO USE AND IN INSTRUCTING

OTHERS.

• Keep Children Away – All visitors

should be kept at a distance from

work area.

• Dress Properly – Do not wear

loose clothing or jewelry. They can

be caught in moving parts. Use

of rubber gloves and substantial

footwear is recommended when

working outdoors. Wear protective

hair covering to contain long hair.

• Use Safety Glasses – Always use

face or dust mask if operation is

dusty.

• Wear Appropriate Personal

Hearing Protection During Use

– Under some conditions and

duration of use, noise from this

product may contribute to hearing

loss.

EN - 6 WWW.SENIXTOOLS.COM

tools normally spark, and the

sparks might ignite fumes.

• Avoid Unintentional Starting –

Don’t carry the blower with nger

on switch. Be sure switch trigger is

in the locked or off position before

inserting battery pack.

• Don’t Force Appliance – It will

do the job better and with less

likelihood of a risk of injury at the

rate for which it was designed.

• Don’t Overreach – Keep proper

footing and balance at all times.

• Stay Alert – Watch what you are

doing. Use common sense. Do not

operate appliance when you are

tired.

• Store Idle Appliances Indoors

– When not in use, appliances

should be stored indoors in dry,

and high or locked-up place out of

reach of children.

• Maintain blower With Care – Keep

guard and handles clean for best

performance and to reduce the

risk of injury. Keep handles dry

and free from oil and grease.

BLOWER SAFETY WARNING

• This tool is designed for blowing

leaves and other dry garden

rubbish, such as grass and twigs.

• This tool is intended for residential

use only. Commercial use of this

• Use Right Appliance – Do not use

appliance for any job except that

for which it is intended.

• Disconnect Appliance –

Disconnect the appliance from the

power supply when not in use,

before servicing, when changing

accessories such as blades, and

the like.

• Check Damaged Parts – Before

further use of the blower, a guard

or other part that is damaged

should be carefully checked to

determine that it will operate

properly and perform its intended

function. Check for alignment of

moving parts, binding of moving

parts, breakage of parts, mounting

and any other condition that may

affect its operation. A guard or

other part that is damaged should

be properly repaired or replaced

call our customer service help line

for assistance.

• Lighting – Only operate blower in

daylight or good articial light.

• Don’t overreach – Keep proper

footing and balance at all times.

• Don’t Use In Rain.

• Avoid Dangerous Environments

– Don’t use blower in rain, damp

or wet locations. Do not operate

blower in gaseous or explosive

atmospheres. Motors in these

WWW.SENIXTOOLS.COM 7 - EN

product is prohibited and will void

the manufacturer's warranty.

• Prevent unintentional starting.

Ensure the switch is in the

off-position before connecting

to battery pack, picking up or

carrying the appliance. Carrying

the appliance with your nger on

the switch or energizing appliance

that have the switch on invites

accidents.

• Disconnect the battery pack from

the appliance before making

any adjustments, changing

accessories, or storing appliance.

Such preventive safety measures

reduce the risk of starting the

appliance accidentally.

• When operating the unit, never

point the blower nozzle in the

direction of people or pets or in

the direction of windows. Use

extra caution when blowing debris

near solid objects, such as trees,

automobiles, and walls.

• Be sure to secure the unit when

transporting it.

• Never douse or squirt the unit

with water or any other liquid.

Clean the unit after each use as

described in the cleaning and

storage section.

• Carefully inspect your appliance

prior to use and follow all label

and marking instructions.

• Keep all parts of your body away

from any moving parts and all hot

surfaces of the unit.

• Do not put any object into the

tool’s openings. Do not use the

tool with any opening blocked;

keep openings free of dust, lint,

hair, or any other object that may

reduce air ow.

• Check the work area before each

use. Remove all objects such as

rocks, broken glass, nails, wire,

or string, which can be thrown

or become entangled in the

machine.

• Service on the product must

be performed by qualied

repair personnel only. Service

or maintenance performed by

unqualied personnel could result

in injury to the user or damage to

the product.

• Never run the unit without the

proper equipment attached.

Always ensure the blower tube is

properly installed.

• Always grasp the handle when

operating the unit, only operate

the machine in its intended

orientation.

BATTERY PACK AND BATTERY

CHARGER SAFETY WARNINGS

EN - 8 WWW.SENIXTOOLS.COM

acid and lithium-ion cell types. If

this advice is incorrect for a cell

design that differs from these,

then the correct advice may be

substituted.)

• Do not use a battery pack or

appliance that is damaged

or modied. Damaged or

modied batteries may exhibit

unpredictable behavior resulting in

re, explosion or risk of injury.

• Do not expose a battery pack

or appliance to re or excessive

temperature. Exposure to re or

temperature above 266°F(130°C)

may cause explosion.

• Follow all charging instructions

and do not charge the battery

pack or appliance outside of the

temperature range specied in the

instructions. Charging improperly

or at temperatures outside of the

specied range may damage the

battery and increase the risk of

re.

• Do not modify or attempt to repair

the appliance or the battery pack

(as applicable) except as indicated

in the instructions for use and

care.

EMERGENCY

Familiarize yourself with the use

of this product by means of this

• Recharge only with the charger

specied by the manufacturer. A

charger that is suitable for one

type of battery pack may create a

risk of re when used with another

battery pack.

• Use appliances only with

specically designated battery

packs. Use of any other battery

packs may create a risk of injury

and re.

WARNING!

Use only the following type and size

battery: B25X2/B50X2.

• When battery pack is not in use,

keep it away from other metal

objects, like paper clips, coins,

keys, nails, screws or other small

metal objects, that can make a

connection from one terminal

to another. Shorting the battery

terminals together may cause

burns or a re.

• Under abusive conditions,

liquid may be ejected from the

battery; avoid contact. If contact

accidentally occurs, ush with

water. If liquid contacts eyes,

additionally seek medical help.

Liquid ejected from the battery

may cause irritation or burns.

(This advice is considered correct

for conventional NiMh, NiCd, lead

WWW.SENIXTOOLS.COM 9 - EN

instruction manual. Memorize the

safety directions and follow them to

the letter. This will help to prevent

risks and hazards.

1. Always be alert when using this

product, so that you can recognize

and handle risks early. Fast

intervention can prevent serious

injury and damage to property.

2. Switch off the product and

remove the battery pack if there

are malfunctions. Have the

product checked by a qualied

professional and repaired, if

necessary, before you operate it

again.

RESIDUAL RISKS

Even if you are operating this

product in accordance with all

the safety requirements, potential

risks of injury and damage remain.

The following dangers can arise in

connection with the structure and

design of this product:

1. Health defects resulting from

vibration emission if the product

is being used over long periods of

time or not adequately managed

and properly maintained.

2. Injuries and damage to property

due to broken attachments or the

sudden impact of hidden objects

during use.

3. Danger of injury and property

damage caused by ying objects.

4. Prolonged use of this product

expose the operator to vibrations

and may produce ‘whitenger’

disease. In order to reduce the

risk, please wear gloves and keep

your hands warm. If any of the

‘whitenger’ symptoms appear,

seek medical advice immediately.

‘Whitenger’ symptoms include:

numbness, loss of feeling,

tingling, pricking, pain, loss of

strength, changes in skin colour

or condition. These symptoms

normally appear in the ngers,

hands or wrists. The risk increases

at low temperatures.

WARNING!

This product produces an

electromagnetic eld during

operation! This eld may under

some circumstances interfere with

active or passive medical implants!

To reduce the risk of serious or fatal

injury, we recommend persons with

medical implants to consult their

doctor and the medical implant

manufacturer before operating this

product!

SAVE THESE INSTRUCTIONS

EN - 10 WWW.SENIXTOOLS.COM

KNOW YOUR UNIT

APPLICATIONS

Model: BLX2-M

As a cordless blower:

Blowing leaves, garden waste such as grass, twigs and pine

needles.

1Blower Tube

2 Air Outlet Mounting Base

3 LED Light

4 Speed Control Switch

5 On/Off Switch

6 Handle

7 Battery

8 Housing

9 Air Inlet Mounting Base

NOTE:

BLX2-M-0 does not include the charger and the battery

pack.

SPECIFICATIONS*

Model BLX2-M

Input voltage 18 V d.c.

Max. wind speed 181MPH

Max. wind volume 75CFM

Weight (without battery pack) 4.5lbs

Battery model for option B25X2 B50X2

Rated voltage 18V 18V

Rated capacity 2.5Ah 5.0Ah

Weight 0.74lbs 1.43lbs

Charger model CHX2

Rated input 100-240V ~ 50/60Hz

Rated output 21V, 2000mA

Charging time

(with 2.5 Ah battery) 85mins

Charging time

(with 5.0 Ah battery) 130mins

Protection class(for charger) / II

Weight 0.75lbs

Model BLX2-M-0

Input voltage 18 V d.c.

Max. wind speed 181MPH

Max. wind volume 75CFM

Weight (without battery pack) 4.5lbs

Battery model Not included

Charger model Not included

WWW.SENIXTOOLS.COM 11 - EN

ASSEMBLY

1. Unpack all parts and lay them on a flat, stable surface:

2. Remove all packing materials and shipping devices, if

applicable.

3. The scope of delivery varies depending on the country

and purchased variant:

Model of BLX2-M-0

• Blower x1

• Instruction manual x1

• Blower tube x1

4. If you find that parts are missing or show damage do

not use the product but contact your dealer. Using an

incomplete or damaged product represents a hazard to

people and property.

5. Ensure that you have all the accessories and tools

needed for assembly and operation. This also includes

suitable personal protective equipment.

NOTE:

BLX2-M includes the charger and the battery pack.

BLX2-M-0 does not include the charger and the battery

pack.

WARNING:

Wear protective gloves for this assembly work

and always lay the product on a flat and stable

surface while assembling.

Follow the assembly instructions step-by-step

and use the pictures provided as a visual guide

to easily assemble the product!

Do not insert the battery pack before the power

tool is completely assembled or adjusted!

INSTALLING THE BLOWER TUBE

WARNING:

Take care of small parts that are removed during

assembly or when making adjustments. Keep

them secure to avoid loss.

Align and attach the blower tube to the air outlet mounting

base. Rotate clockwise for snapping the raised block of the

blower tube into slot (Fig.2).

INSTALLING/REMOVING THE

BATTERY PACK

WARNING:

Using unsuitable batteries can lead to

malfunctions or damage the machine.

To install:

Align and slide the battery pack into the battery docking port

until it is locked in position (Fig.3).

To remove:

Press the unlock button of the battery pack and slide it out

(Fig.4).

OPERATION

WARNING:

Inspect the tool for complete installation. Any

missing, damaged or misplace may cause

serious injury. Wear protective equipments at all

times while operating the power tool.

SWITCHING ON/OFF

1. Check and secure all accessories.

2. Press the on/off switch to turn on the blower.

3. Release the on/off switch to turn off the blower (Fig.5).

WARNING:

Wait until it comes to a complete stop before

putting the product down!

NOTE:

The LED light will automatically turn on/off when the blower

starts/stops.

ADJUSTING BLOWING SPEED

The blowing speed can be changed by speed control

switch. Adjust to desired blower speed to meet your

requirement (Fig.5).

OPERATING HOURS

Only operate the product at reasonable hours - not early in

the morning, late at night or on weekends/public holidays

when people might be disturbed. Inform yourself about local

restrictions.

EN - 12 WWW.SENIXTOOLS.COM

GENERAL

WARNING:

To reduce the risk of hearing loss ,hearing

protection is required.

1. Double check that accessories or application tools are

properly fixed.

2. Always hold the product on its handle. Keep the handle

dry and clean to ensure safe support.

3. Ensure that the air vents are always unobstructed

and clear. Clean them if necessary with a soft brush.

Blocked air vents may lead to overheating and damage

the product.

4. Switch the product off immediately if you are disturbed

while working by other people entering the working

area. Always let the product come to complete stop

before putting it down.

5. Do not overwork yourself. Take regular breaks to ensure

you can concentrate on the work and have full control

over the product.

6. Before switching the product on, check whether it has

been assembled correctly and all the moving parts are

running smoothly!

7. While working, ensure that the product does not strike

hard objects, as this can cause damage.

8. Do not blow any solid bodies such as stones, branches,

pieces of branch or similar.

9. We recommend slightly dampening surfaces in dusty

conditions or using a moister attachment.

NOTE:

The risk of the operation may occurs, such as the sharp

tree branches may cut the user's skin, the blade of the unit

may hurt the user's body. Always wear eye, hearing, hand,

foot and body protection to reduce the risk of injury when

operating this unit.

BLOWING

1. Before blowing, loosen leaves that are stuck to the

ground using a broom or rake.

2. Hold the tube approximately 3.9inch(10cm) above

the ground and walk slowly forward using a sweeping

motion from side to side.

3. Direct the air stream away from yourself.

4. Ensure that you do not stir up any heavy objects and

hurt somebody or damage something.

WARNING:

When the blower vibrates abnormally,

immediately shut off the unit. Abnormal vibration

often shows a mechanical problem and

continues use could result in injury or property

damage.

CHARGING THE BATTERY PACK

WARNING:

This Lithium-Ion battery pack is shipped partially

charged. Fully charge the battery pack before

using it for the first time.

NOTE:

Charge batteries at a ambient temperature of 32°F-104°F

(0°C-40°C) and always store batteries at a ambient

temperature of 32°F-77°F (0°C-25°C).

1. Charge the Lithium-Ion battery pack only with the

correct charger.

2. Connect the charger to a power supply, the light

indicator of the charger turns red.

3. Align the raised ribs of the battery pack with the slot in

the charger (Fig.6).

4. Insert the battery pack into the charger, the light

indicator of the charger turns green and it flashes.

5. The charger will communicate with the battery pack to

evaluate the condition of the battery pack.

6. It is fully charged that the four lights of the battery turn

on. Disconnect the power supply from the charger.

Remove battery pack from the charger.

CHARGING INDICATOR

Press the light button to check the battery pack whether

needs to charge (Fig.4) .

Lights

Status

Lighted Off Blinking

The battery is at full

capacity.

The battery is at 75%

capacity.

WWW.SENIXTOOLS.COM 13 - EN

The battery is at 50%

capacity and requires

charging.

The battery is at 25%

capacity and requires

charging soon.

The battery is less

than 5% capacity

and requires charging

immediately.

WARNING:

Malfunctions may occur when the four lights

blinking in turns.

OVERHEAT PROTECTION

When the tool/battery is overheated, the tool stops

automatically. In this situation, let the power tool/battery cool

before turning the tool on again.

OVERDISCHARGE PROTECTION

When the battery capacity is not enough, the tool stops

automatically. In this case, remove the battery from the tool

and charge the battery.

MAINTENANCE

WARNING:

Always switch the product off, remove the

battery pack and let the product cool down

before performing cleaning and maintenance

work!

Always wear eye, hearing, hand, foot and body

protection to reduce the risk of injury when

operating this unit.

Only perform cleaning and maintenance work

according to these instructions! All further works

must be performed by a qualied specialist!

And only use specied spare parts for

replacement.

CLEANING

• Switch the product off, pull out the battery pack from the

product.

• Clean up debris from blower tube.

• Remove wood chips and other debris from air vents.

• Use a small brush to clean the outside of the unit. Do not

use strong detergents. Household cleaners that contain

aromatic oils such as pine and lemon, and solvents such

as kerosene, can damage plastic.

• Wipe off any moisture with a soft cloth. The tool should

never come in contact with water.

TRANSPORT

• Clean the product as described above.

• Always carry the product by its handle.

• Protect the product from any heavy impact or strong

vibrations which may occur during transportation in

vehicles.

• Secure the product to prevent it from slipping or falling

over, damage or injury.

STORAGE

• Clean the product as described above.

• Store the product and its accessories in a dark, dry, frost-

free, well-ventilated place.

• Always store the product in a place that is inaccessible

to children. The ideal storage temperature is between

50°F(10°C) and 86°F(30°C).

• We recommend using the original package for storage or

covering the product with a suitable cloth or enclosure to

protect it against dust.

NOTE:

To prolong battery life, never store battery pack in a

completely discharged condition. Make sure the battery

pack is charged once per year or when the LED indicator

shows only one light.

DISPOSAL

Waste product should not be disposed of with household

waste. Please recycle where facilities exist. Check with your

local authority or retailer for recycling advice.

Electrical products should not be discarded with

household products. Used electrical products

must be collected separately and disposed of at

collection points provided for this purpose. Talk

with your local authorities or dealer for advice

on recycling.

EN - 14 WWW.SENIXTOOLS.COM

TROUBLESHOOTING

Suspected malfunctions are often due to causes that the users can x themselves. Therefore, check the product using this

section. In most cases the problem can be solved quickly.

PROBLEM POSSIBLE CAUSE SOLUTION

Product does not start

Battery pack not properly attached Attach properly

Battery pack capacity too low Remove and charge battery pack

Battery pack damaged Check by a specialist electrician

Product does not reach full power

Battery pack capacity too low Charge battery pack

Air vents are blocked Clean the air vents

Vibration or noise is excessive Bolts/nuts are loose Tighten bolts/nuts

Product suddenly stops

Battery pack capacity too low Remove and charge battery pack

Battery too hot Remove battery pack and let it cool down

WWW.SENIXTOOLS.COM 15 - EN

PARTS

No. Part # Description Qty.

1202054000058 Blower tube 1

2202015000445 Tube Sleeve 1

WWW.SENIXTOOLS.COM

WARRANTY

LIMITED WARRANTY

5-year limited warranty on all Senix X2 series outdoor battery powered equipment. 3-year limited warranty on all Senix X2

batteries and chargers.*

FOR FIVE YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or

workmanship on power tools. Defective product will receive free repair.*

FOR THREE YEARS from the original date of retail purchase this Senix product is warranted against defects in materials or

workmanship on batteries and chargers. Defective product will receive free repair.*

This warranty does not cover normal wear of parts and components such as cutting chain, line or blades nor does this

warranty cover product transportation cost for warranty or service.

Warranty is subject to the following conditions:

• Warranty applies to the original purchaser at retail and is not transferrable*

• Warranty Registration at www.senixtools.com

• The tool has not been misused, abused, neglected, altered, modied or repaired by anyone other than an authorized

service center

• Only genuine Senix accessories have been used with or on this product

• The tool has been subjected to normal wear and tear

• The tool has not been used for trade or professional purposes

• The tool has not been used for rental purposes

• This warranty only covers defects arising under normal usage and does not cover any malfunction, failure or defect

resulting from misuse, abuse (including overloading the product, exposure to water or rain) accidents, neglect or lack of

proper installation and improper maintenance or storage.

To locate your nearest Senix service provider call toll free at 800-261-3981 or email us at [email protected].

Additional Limitations

Any implied warranty granted under state law, including warranties of merchantability or tness for a particular purpose,

are limited to three years from the date of purchase on power tools and chargers and seven years on batteries. The

manufacturer is not responsible for direct, indirect, incidental or consequential damages. Some states and provinces do not

allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages,

so the above limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and you may also

have other rights which vary from state to state or province to province.

The YAT USA declines any responsibility in regard to civil liability arising from abusive use or not in conformity with proper

use and maintenance of the machine as described in the operator’s manual.

YAT USA is not responsible for direct, indirect, incidental or consequential damages.

After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator’s manual

before using the machine.

*Original purchase receipt may be required for proof of purchase

For customer service contact us toll free at 1-800-261-3981 or Senixtools.com.

10506 Bryton Corporate Center Dr, #500 Huntersville, NC 28078

CON IONES DE LITIO DE 20V MÁX

SOPLADOR INALÁMBRICO

Manual del operador

Modelo: BLX2-M

BLX2-M-0

Para el servicio de atención al cliente, llame al 1-800-261-3981 o envíe un email a:

[email protected]

GUARDE ESTE MANUAL PARA FUTURAS CONSULTAS.

INSTRUCCIONES ORIGINALES

ES - 18 WWW.SENIXTOOLS.COM

1234

WWW.SENIXTOOLS.COM 19 - ES

Botón de luz

Botón de des-

bloqueo

Luz LED

Botón de control de velocidad

Interruptor de

encendido/

apagado

ES - 20 WWW.SENIXTOOLS.COM

ÍNDICE

SEGURIDAD Y SÍMBOLOS INTERNACIONALES .......... 20

INSTRUCCIONES DE SEGURIDAD ............................... 21

CONOZCA SU UNIDAD ................................................... 27

ESPECIFICACIONES* ..................................................... 27

ENSAMBLAJE .................................................................. 28

OPERACIÓN .................................................................... 28

MANTENIMIENTO ........................................................... 30

SOLUCIÓN DE PROBLEMAS ......................................... 32

PIEZAS ............................................................................. 33

GARANTÍA ....................................................................... 34

SEGURIDAD Y SÍMBOLOS IN-

TERNACIONALES

Este manual del operador describe la seguridad y los sím-

bolos y pictogramas internacionales que pueden aparecer

en este producto. Lea el manual del operador para obtener

información completa sobre seguridad, montaje, operación

y mantenimiento y reparación.

Precaución / Advertencia.

Para reducir el riesgo de lesiones, el usuario

debe leer y entender el manual de instruc-

ciones.

Use protección para los ojos.

Use protección auditiva.

Use protección respiratoria.

Use guantes de protección.

Use calzado robusto no resbaladizo.

No usar bajo la lluvia o en condiciones de

humedad.

Mantenga a los transeúntes a una distancia

segura de la zona de trabajo.

Los objetos lanzados pueden rebotar y causar

lesiones personales o daños a la propiedad.

Cuchillas giratorias. Mantenga sus manos

y pies alejados de las aberturas mientras el

aparato esté en funcionamiento.

No deseche los paquetes de baterías en los

ríos ni los sumerja en agua.

No arroje los paquetes de baterías al fuego.

Explotarán y causarán lesiones.

Use y guarde la batería a una temperatura

inferior a 122°F (50°C).

No desensamble, aplaste o caliente por enci-

ma de los 212°F (100°C). Nunca exponga la

batería a microondas o altas presiones.

Para uso solo en interiores. Utilice el cargador

de batería únicamente en interiores.

La page charge ...

Senix BLX2-M Manuel utilisateur

Marque: Senix

Modèle: BLX2-M

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Senix BLX2-M User manual
español: Senix BLX2-M Manual de usuario

Senix BLX2-M Manuel utilisateur

Senix BLX2-M Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents