Monster DNA GO Manuel utilisateur

Monster
Marque
Monster
Modèle
DNA GO
Catégorie
Casques mobiles
Taper
Manuel utilisateur
For French, Spanish and Portuguese
instructions scan here:
www.monsterforever.com
Monster DNA Manual
- Matte Finish
- Place Mannual inside the envelope
Envelope
- Matte Black 350 gsm cardstock front and back
- Cardstock
Stickers
- Matte Finish
- Place Stickers Inside the Envelope
- DO NOT print the white dieline
Product Specs:
Model No: Monster DNA GO
Version: 5.2 Bluetooth® Chipset
Support profiles: HSP/HFP/A2DP/AVRCP
Frequency response: 20hz-20kHz
Impedance: 32Ω
Driver size: 12mm
Sensitivity: 110±3dB
Eective range: up to 10 meters
Earbud battery capacity: 2 x 50mAh
Playing time: 7-8 hours
Charging case battery capacity: 400mAh
Earbud charging time: Max. 1.5 hour
Charging case charge time: Approx. 1.5 hours
Charging port: Type-C™
Input voltage: DC5.0V / 1A
Ingress protection: iPX5 (Earbuds only)
Wireless charging: Yes, QI™ standard
Monster DNA GO
Earbud Operation
Power on: Take both earbuds out of the charging case and they will automatically power
ON. Alternatively, if the earbuds are powered o, press and hold the (MFB) button for
2 seconds.
Power o: Place the earbuds back in the charging case, ensure that the case is powered,
the earbuds will be automatically powered OFF. Or you can press and hold the (MFB)
button on either earphone for 9 seconds.
Play/Pause:
Press either “MFB” button once.
Volume Down:
Press and hold the left “MFB” decrease
volume incrementally.
Volume Up:
Press and hold the right “MFB” increase
volume incrementally.
Previous Track:
Double press the Left “MFB”.
Next Track:
Double press the Right “MFB”.
Answer Call:
Press either “MFB” button once.
(if answering a call while on another call,
then the first call will be placed on hold).
Reject Call:
Double press either “MFB”.
End Call:
Press either “MFB” button.
Activating Phone Assistant:
Triple press either “MFB”.
(does not work during a call)
Pairing:
When the earbuds are removed from the
charging case for the first time, they will
enter Bluetooth pairing automatically. To
pair to a new device, disconnect from the
DNA GO or turn o Bluetooth pairing on
your original device.
Charging Case
Button
Multi-Function
Button (MFB)
Earbud LED
Indicator
Charging Case
LED Indicator
Type-C™
Charging Port
Made in China - Model: 2MNTW0396
FCC ID：WWE-2MNTW0396
IC：8047A-2MNTW0396
Package Includes:
Package Includes: (1) pair of wireless earbuds, (1)
charging case, (1) charging cable, (12) pairs of eartips, (1) user manual
Warranty: 2 Year Limited Lifetime Warranty
See more at www.monsterforever.com
2022 © The M Monster logo and Pure Monster Sound are trademarks or
registered trademarks that are used under license of Monster, Inc. 2022 © All
rights reserved. Manufactured, marketed and distributed by Lifeworks
Technology Group LLC. under license. New York, NY 10018. All other
trademarks are property of their respective owners.
website: www.monsterforever.com support: [email protected]
English
This Bluetooth® earpiece shall be charged by the supplied charging unit only.
Caution: The batteries in this product are not replaceable. During use, storage or transportation the
battery should not be subjected to extremely low temperatures, or low air pressure at high altitude. If the
battery is exposed to extremely high temperatures it could result in an explosion or the leaking of
flammable liquid or gas. Please take care when disposing of the unit; disposal in a fire, oven, mechanically
crushing or cutting machine could cause an explosion.
Warning: Do not dispose of the unit in fire or water. Never attempt to disassemble and reassemble.
Waste electrical products should not be disposed of with household waste, please recycle where
facilities exist. Check with your local authority for recycling advice. Keep your device and all accessories
out of the reach of children and animals. Small parts may cause choking or serious injury if swallowed.
Avoid exposing your device to very cold or very hot temperatures (Below 0° or above 45° C). Extreme
temperatures can cause deforming of the device and reduce the charging capacity and life of your device.
Do not allow your device to get wet, liquids can cause serious damage. Do not handle your device with
wet hands.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., iPhone,
iPad and Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a wireless power charger,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the product.
Bluetooth® Pairing:
Go to “Bluetooth” Setting on your Bluetooth® device
(Phone, Tablet, etc.).
Turn the Bluetooth® ON, on your device.
Open the charging case, and take the earbuds out, they will turn on automati-
cally.
If this is your first time using your earbuds, they will automatically enter
Bluetooth Pairing mode.
On your devices Bluetooth menu, select the ‘Monster DNA Go’ earbuds from the
list of available devices.
To pair your earbuds to a dierent Bluetooth® device, disconnect from the DNA
GO or turn o Bluetooth® pairing on your original device. Remove the earbuds
from the case and they will enter pairing mode automatically.
Troubleshoot tip: If the earbuds do not connect to your device, place the
earbuds back in their charging case, turn your device’s Bluetooth OFF and then
back ON again, then repeat the pairing process.
Your earbuds are designed to automatically sync to each other when they are
turned ON, however if they ever fail to sync, please put both earbuds back into
the charging case and try a factory reset.
Factory Reset: Before resetting your earbuds, go to your paired device’s
Bluetooth list and remove (forget) the ‘Monster DNA Go’ earbuds.
1. Place both earbuds in the charging case and make sure that they are both
placed securely and are charging (the Earbud LED indicator should be ON)
2. Press and hold the “Charging Case” button for 15s until the Charging Case
LED indicator flashes red and white. The Earbud LED indicator will blink twice,
then turn OFF.
3. Once the Charging Case LED Indicator stops flashing, remove both earbuds
from the case and hold them near each other. The Earbud LED Indicator on both
earbuds should flash quickly or 5s-10s, then turn o, followed by intermittent
flashing of the Left Earbud LED Indicator only. If this does not happen, repeat the
Factory Reset steps.
4. The Factory Reset is complete, and the earbuds will forget any previously
paired devices. Follow the Bluetooth Pairing Instructions from the beginning to
pair to a new device.
Charging the Case:
Connect the USB-C™ charging cable into the socket on the charging case. Plug
the cable into a standard USB-C™ 5V / 1A output. (LED indicator will flash red or
green depending on the battery level.)
To check the charging case’s battery level, single press the Charging Case
Button.
· 0-10% - The first LED is blinking red.
· 10-33% - The first LED is breathing; the others are OFF.
· 33-66% - The first LED is ON, the second is breathing, the third is OFF.
· 66-99% - The first and second LEDs is ON, the third LED is breathing.
· 100%- All three LEDs are ON.
You can also charge your case via any Qi™ compatible wireless charger (not
included); a full charge should take approximately 2.5 hours.
Warning: To avoid damage to the charging case,
please only use a 5V / 1A charger.
Charging the Earbuds:
To charge your earbuds, place them the charging case. The earbud LED
indication will light up while they are charging and will turn o once they
are fully charged.
It’s recommended to fully charge your earbuds and charging case
before first use.
Warning: The earbuds can only be used with the provided charging
case.
Responsible Party:
Company name: LIFEWORKS TECHNOLOGY GROUP LLC
Address:530 7th Ave, 21st Floor | New York, NY 10018
Tel:212.221.1863 ext. 1534
E-mail:[email protected]
ANICES-3(B)/NMB-3(B)
ThisClassBdigitalapparatuscomplieswithCanadianICES-003.
(CetappareilnumériquedelaClasseBconformeàlanormeNMB-003duCanada)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme
aux CNR d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d' en compromettre le fonctionnement.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
  • Page 1 1

Monster DNA GO Manuel utilisateur

Monster
Marque
Monster
Modèle
DNA GO
Catégorie
Casques mobiles
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Autres documents