Pioneer VSX-S520 Manuel utilisateur

English

Français

Español

Italiano Deutsch Nederlands

Language select / Sélection de la langue / Selección de idioma / Selezione lingua /

Sprachauswahl / Taal selecteren / Выбор языка

VSX-S520D

VSX-S520

Русский

E

N

Before Start

What's in the box .................................................................... 2

Part Names

Front Panel ............................................................................. 3

Rear Panel .............................................................................. 4

Remote Controller .................................................................. 6

Display .................................................................................... 7

Install

1. Speaker Layout .................................................................. 8

2. Connect the Speakers ...................................................... 13

3. Connect the TV ................................................................. 15

4. Connect the HDMI AV Components ................................. 16

5. Connect the Audio Components ....................................... 17

6. Connect Other Cables ...................................................... 18

Initial Setup

Initial Setup with Auto Start-up Wizard ................................. 19

Playback

AV Component Playback ...................................................... 22

Internet Radio ....................................................................... 23

Spotify ................................................................................... 25

Music Server ......................................................................... 26

USB Storage Device ............................................................. 28

AirPlay

®

................................................................................ 30

BLUETOOTH

®

Playback ......................................................31

Listening to the FM/DAB Radio ............................................ 32

Listening Modes ................................................................... 35

AV Adjust .............................................................................. 44

Supplementary information

Supplementary information for player functions .................... 46

Advanced Setup

System Setup ........................................................................ 47

MCACC ................................................................................. 56

Network/Bluetooth ................................................................. 59

Firmware Update .................................................................. 62

Others

Troubleshooting .................................................................... 65

General Specifications .......................................................... 70

About HDMI .......................................................................... 72

License and Trademark Information ..................................... 73

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

AV RECEIVER

VSX-S520D

VSX-S520

Instruction

Manual

2

> Before Start > Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Before Start

What's in the box

0

Connect speakers with

4

Ω to

8

Ω impedance.

0 The power cord must be connected only after all other cable connections are completed.

0 We will not accept responsibility for damage arising from the connection of equipment

manufactured by other companies.

0 Functionality may be introduced by firmware updates and service providers may cease

services, meaning that some network services and content may become unavailable in

the future. Furthermore, available services may vary depending on your area of

residence.

0 Specifications and appearance are subject to change without prior notice.

0 We plan to provide support for the Dolby Atmos and DTS:X audio format through a

firmware update for this unit. Refer to our website for more information.

Main unit (1)

Remote controller (RC-933R) (1), batteries (AAA/R03) (2)

Speaker setup microphone (1)

DAB/FM antenna (1) (VSX-S520D)

Indoor FM antenna (1) (VSX-S520)

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

3

E

N

Part Nam es

Front Panel

1. Í STANDBY/ON button: Turns the unit on or into standby mode.

2. Display (P7)

3. Remote control sensor

4. INPUT SELECTOR dial: Switches the input to be played. (BD/DVD / CBL/SAT / GAME /

STRM BOX / CD / TV / PHONO / DAB (VSX-S520D) / FM / NET / USB / BT AUDIO)

5. MASTER VOLUME dial: Allows you to adjust the volume.

6. PHONES jack: Stereo headphones with a mini plug (

Ø 3.5 mm) are connected.

7. MCACC SETUP MIC jack: The supplied speaker setup microphone is connected.

8. USB port: A USB storage device is connected so that music files stored in it can be

played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable.

9. FL OFF indicator: This lights when you have pressed DIMMER repeatedly to turn the

display off.

10.

NETWORK indicator: When the power of the unit is on, this lights when "NET" is selected

with the input selector and the unit is connected to the network. If the unit is in standby

mode, this lights when functions such as HDMI CEC and Network Standby are enabled.

 













4

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Rear Panel

1. ANTENNA DAB / FM jack: Connect the supplied antenna.

2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

4. SIGNAL GND terminal: The ground wire of the turntable is connected.

5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

6. Power cord

7. NETWORK port: Connect to the network with an Ethernet cable.

8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

10.

SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.

11.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

180°

90°



 







 







VSX-S520D

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

5

E

N

1. ANTENNA FM UNBAL 75h jack: Connect the supplied antenna.

2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled

device. The diagram shows the movable range for the wireless antenna. Do not try to

force it beyond this range otherwise you may break it.

3. AUDIO IN jacks: Input AV component audio signals with an analog audio cable.

4. SIGNAL GND terminal: The ground wire of the turntable is connected.

5. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals

with a digital optical cable or digital coaxial cable.

6. Power cord

7. NETWORK port: Connect to the network with an Ethernet cable.

8. HDMI OUT jack: Connect a HDMI cable to transfer video signals and audio signals to a

TV.

9. HDMI IN jacks: Input video signals and audio signals with a HDMI cable connected to an

AV component.

10.

SPEAKERS terminals: Connect speakers or passive subwoofers with speaker cables.

11.

SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable.

180°

90°



 







 







VSX-S520

6

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Remote Controller

1. Í button: Turns the unit on or into standby mode.

2. Input selector buttons: Switches the input to be played.

3. (AV ADJUST) button: You can perform common settings on the TV screen. (P44)

4. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.

5. button: Displays the Home.

6. Volume buttons: Allows you to adjust the volume. This button also cancels the muting.

7. button: Temporarily mutes audio. Press again to cancel muting.

8. Listening mode buttons: Allows you to select the listening mode. (P35)

9. Play buttons: You can start play of the Music Server or USB.

10.

button: You can start repeat or random play of the Music Server or USB.

CLEAR button: Deletes all characters you have entered when entering text on the TV

screen.

11.

(STATUS) button: Switches the information on the display.

12.

button: Returns the display to the previous state during setting.

13.

DIMMER button: You can switch the display off or adjust the brightness of the display in

three steps.

14.

MODE button: Switches tuning to an FM station between automatic tuning and manual

tuning.

15.

+Fav button: Used to register FM/DAB radio stations.































30°

Approx.5 m

(16 ft.)

> Before Start >Part Names > Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

7

E

N

Display

1. Lights in the following conditions.

HDMI: HDMI signals are input and selected.

ARC: Audio signals from the ARC compatible TV are input and selected.

USB: When "USB" is selected with the input selector and the unit is connected by USB

and the USB device is selected. Flashes if the USB is not properly connected.

NET: When "NET" is selected with the input selector and the unit is connected to the

network. It will flash if the connection to the network is not correct.

DIGITAL: Digital signals are input and the digital input selector is selected.

2. Lights when operating the "NET" or "USB" input selector indicating remote controller

cursor operations are possible in screens showing list of tracks, for example.

3. Lights when headphones are connected.

4. Lights when operating the "NET" or "USB" input selector when tracks are played or

paused.

5. Lights according to the type of input digital audio signals and the listening mode.

6. Lights in the following conditions.

RDS (European models): Receiving RDS broadcasting.

AUTO: When FM tuning mode is auto.

TUNED: Receiving FM radio.

FM STEREO: Receiving FM stereo.

SLEEP: Sleep timer has been set.

ASb: When Auto Standby function is enabled. (P54)

7. Flashes when muting is on.

8. Displays various information of the input signals. Characters that cannot be displayed on

this unit are replaced with asterisks ( ).



Neo:6









 

8

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Install

1. Speaker Layout

1

2

1: 22° to 30°, 2: 120°

5.1 Channel System

Front speakers output front stereo sound and the center

speaker outputs sounds emanating from the center of the

screen, such as dialog and vocals. Surround speakers

create the sound field at the rear. The powered subwoofer

reproduces bass sounds and enriches the sound field. The

optimal positioning for front speakers is at ear height, and for

surround speakers it is just above ear height. The center

speaker should be set up at an angle to face the listening

position. Placing the powered subwoofer between the center

speaker and a front speaker gives you a natural sound even

when playing music.

1,2 Front Speakers

3 Center Speaker

4,5 Surround Speakers

6 Powered Subwoofer

9

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

1

3´ (0.9 m)

or more

1: 22e to 30e

3.1.2 Channel System-1

(Front High Speakers)

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of front high speakers, a type of height speaker. Front high

speakers should be situated at least 3y/0.9 m higher than

the front speakers. They should also be put directly above

the front speakers, angled to face the listening position.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos. Visit our website

for details about firmware updates.

1,2 Front Speakers

3 Center Speaker

4,5 Front High Speakers

6 Powered Subwoofer

10

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

1

1: 65° to 100°

3.1.2 Channel System-2

(Ceiling Speakers)

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of top middle speakers, a type of height speaker. Fit top

middle speakers on the ceiling directly above the listening

position. The distance between each pair should match the

distance between the two front speakers.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos. Visit our website

for details about firmware updates.

0 Dolby Laboratories recommends placing this type of

height speakers to obtain the best Dolby Atmos effect.

1,2 Front Speakers

3 Center Speaker

4,5 Top Middle Speakers

6 Powered Subwoofer

11

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

1

1: 22° to 30°

3.1.2 Channel System-3

(Dolby Enabled Speakers (Dolby Speakers))

This is a 3.1-channel system consisting of front speakers, a

center speaker, and a powered subwoofer, with the addition

of Dolby enabled speakers (front), a type of height speaker.

Dolby enabled speakers are special speakers designed to

face the ceiling so that sound is heard after bouncing off the

ceiling so that sound appears to be coming from overhead.

Place Dolby enabled speakers (front) above the front

speakers.

0 We plan to provide support for the Dolby Atmos audio

format through firmware updates for this unit. After this

firmware update, by installing height speakers, you can

select the Dolby Atmos listening mode, which realizes the

most up-to-date 3D sound including overhead sounds,

when the input format is Dolby Atmos. Visit our website

for details about firmware updates.

1,2 Front Speakers

3 Center Speaker

4,5 Dolby Enabled Speakers (Front)

6 Powered Subwoofer

12

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Speaker combinations

Speaker Channels FRONT CENTER SURROUND HEIGHT

2.1 ch

3.1 ch

4.1 ch

5.1 ch

2.1.2 ch

3.1.2 ch

13

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

2. Connect the Speakers

a speaker cable, b subwoofer cable

1/2˝

(12 mm)

a

b

1

2

3

a

b

Connect the speakers

Refer to the illustration to connect the speaker system.

Twist the wires of the speaker cable tightly before inserting

into the terminals. Make correct connection between the

unit’s jacks and speaker’s jacks (+ to + and – to –) for each

channel. If connection is wrong, a bass sound may become

poor due to reverse phase.

Either a powered subwoofer or passive subwoofer may be

connected. To connect a powered subwoofer, use a

subwoofer cable and connect to the SUBWOOFER PRE

OUT jack. To connect a passive subwoofer, connect to the

SPEAKERS terminals with speaker cables as shown below.

14

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

Make sure the exposed wires of the speakers do not stick

out of the speaker terminals when connecting. If the

exposed wires of the speakers touch the rear panel or the +

and – wires touch each other, the protection circuit will be

activated. (P65)

Setup

0 Settings for the speaker configuration you have

connected need to be made in "1. Full Auto MCACC"

(P20) in Initial Setup.

15

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

3. Connect the TV

a HDMI cable, b digital optical cable

a

b

DIGITAL

OPTICAL OUT

1

To ARC TV

For a TV that supports the ARC (Audio Return Channel)

(P72) feature, use an HDMI cable and connect according

to illustration "a". Choose an HDMI IN jack on the TV that

supports ARC when connecting.

To Non-ARC TV

For a TV that does not support the ARC (Audio Return

Channel) feature, connect both the HDMI cable in illustration

"a" and the digital optical cable in "b".

Setup

0 Settings are required to use the ARC function. Select

"Yes" in "4. Audio Return Channel" (P21) in the Initial

Setup.

0 Please refer to the TV’s operation manual for directions

on connections and setup for the TV.

16

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

4. Connect the HDMI AV Components

a HDMI cable

e.g. BD

a

H

DMI O

U

T

1

BD/DVD

GAME

a

Cable/Satellite

set-top box

Streaming media

player

This is an example of connection with an AV component

that has an HDMI jack. With connection to an AV

component that conforms with the CEC (Consumer

Electronics Control) standard, you can use features such as

the HDMI CEC feature that links with the input selector, and

the HDMI Standby Through feature which allows you to

play video and audio from AV components on the TV even

when this unit is in standby mode. (P72)

0 To play 4K or 1080p video, use the high speed HDMI

cable.

Setup

0 Settings are required to use the HDMI CEC and HDMI

Standby Through features. (P53) Make settings after

all connections are complete.

0 To enjoy digital surround sound including Dolby Digital,

audio output should be set to "Bitstream output" on the

connected Blu-ray Disc player or other device.

17

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

5. Connect the Audio Components

a digital coaxial cable, b analog audio cable

CD

a

b

Turntable

Connecting a CD player

Use a digital coaxial cable to connect a CD player to the

DIGITAL IN COAXIAL jack.

Connecting a turntable

You can also connect a turntable that has an MM-type

cartridge to the PHONO jack.

0 If the turntable has a built-in audio equalizer, connect it to

an AUDIO IN jack other than the PHONO jack. Further, if

the turntable uses an MC type cartridge, install an audio

equalizer compatible with the MC type cartridge between

the unit and the turntable, then connect to any AUDIO IN

jack other than the PHONO jack.

If the turntable has a ground wire, connect it to the SIGNAL

GND terminal of this unit.

18

> Before Start > Part Names >Install > Initial Setup > Playback

Supplementary information | Advanced Setup | Others

E

N

6. Connect Other Cables

a DAB/FM antenna, b FM indoor antenna, c Ethernet cable, d Power cord

1

d

3

c

b

a

2

VSX-S520D VSX-S520

(North American

models)

(North American

models)

Antenna Hookup

DAB/FM antenna (VSX-S520D) Connect the supplied

DAB/FM antenna to the ANTENNA DAB/FM terminal. Make

sure the plug is pushed in all the way, then fix in place by

turning the nut to the right. Use a tack or similar to fix the

antenna to a wall.

FM indoor antenna (VSX-S520) Connect the supplied FM

indoor antenna to the ANTENNA FM UNBAL 75h terminal.

Move the FM indoor antenna around while playing the radio

to find the position with the best reception.

Network Hookup

Connect this unit to the network using wired LAN or Wi-Fi

(wireless LAN). You can enjoy network features such as

internet radio by connecting the unit to the network. If you

connect by wired LAN, connect with an Ethernet cable to the

NETWORK port as shown in the illustration. To connect by

Wi-Fi, then after selecting "Wireless" in "3. Network

Connection" (P20) in Initial Setup, select the desired

setting method and follow the onscreen instructions to

configure the connection.

Power Cord Hookup

Connect the power cord of this unit only after all other

connections are completed.

19

> Before Start > Part Names > Install > Initial Setup >Playback

Supplementary information | Advanced Setup | Others

E

N

Initial Setup

Initial Setup with Auto Start-up Wizard

1

3 4

2

TV's remote controller

Initial Setup starts automatically

1. Switch the input on the TV to that assigned to the unit.

2. Put batteries into the remote controller of this unit.

3. Press Í on the remote controller. When power turns on

for the first time, an Initial Setup screen is automatically

displayed on the TV to allow you to make settings

required for start up.

4. Follow the on-screen instructions to select the item with

the cursors of the remote controller and press ENTER to

confirm your selection.

0 To return to the previous screen, press .

To redo Initial Setup: If you terminate the procedure on the

way or want to change a setting made during Initial Setup,

press on the remote controller, select "Miscellaneous" -

"Initial Setup" in the System Setup menu from Home and

press ENTER. To select the language displayed again,

change "OSD Language". (P47)

Initial Setup

Language Select

English

Deutsch

Français

Español

Italiano

Nederlands

Svenska

Русский язык

La page charge ...

Pioneer VSX-S520 Manuel utilisateur

Ce manuel convient également à

Pioneer VSX-S520 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents