Philips HD7857/50 Le manuel du propriétaire

HD7858, HD7857,

HD7856, HD7855

User manual

Benutzerhandbuch

Mode d’emploi

Gebruiksaanwijzing

3

1 Introduction

Congratulations on your purchase and welcome

to Philips! To fully benet from the support that

Philips offers, register your product at

www.philips.com/welcome.

1.1 SENSEO

®

coffee system

Make your coffee moments truly special with

SENSEO

®

. This unique system combines the

easy-to-use Philips SENSEO

®

coffee machine

with the specially developed D.E Master Blenders

SENSEO

®

coffee pods, giving you a full, smooth

coffee with a delicious foam layer.

D.E Master Blenders coffee in convenient

SENSEO

®

coffee pods and Philips’ unique new

SENSEO

®

brewing system are perfectly matched

to ensure that the best taste and aroma are

extracted from the coffee. Discover all SENSEO

®

coffee blends at www.senseo.com.

To ensure a smooth and full coffee taste, you

should keep the following things in mind:

Fresh coffee pods

Use the SENSEO

®

coffee pods that have been

specially developed by D.E Master Blenders for

your SENSEO

®

coffee machine for a full, round

taste. D.E Master Blenders SENSEO

®

coffee

pods stay fresh longer if you store them in an

airtight storage container.

Fresh water

Use fresh water every day. If you have not used

the coffee machine for one day, you have to ush

it with fresh water before you use it again.

Table of contents

1 Introduction 3

1.1 SENSEO

®

coffee system 3

2 General description 4

3 Important 4

3.1 Compliance with standards 5

4 Flushing the machine before

rst use 5

5 Brewing black SENSEO

®

coffee 7

6 Brewing a coffee speciality with

fresh milk 8

7 Adjusting the coffee volume 11

7.1 Adjusting the coffee volume to your

personal taste 11

8 Cleaning 11

8.1 Cleaning the milk spout 12

8.2 Cleaning the coffee spout and

the machine 14

9 Descaling 15

9.1 Descaling procedure 15

10 Ordering accessories 17

11 Environment 17

12 Guarantee and support 17

13 Troubleshooting 18

13.1 SENSEO

®

coffee machine 18

ENGLISH

4

• This machine can be used by

children aged from 8 years and

above and by persons with

reduced physical, sensory or

mental capabilities or lack of

experience and knowledge if they

have been given supervision or

instruction concerning use of the

machine in a safe way and if they

understand the hazards involved.

• Cleaning and user maintenance

shall not be made by children

unless they are older than

8 and supervised.

• Keep the machine and its cord out

of the reach of children aged less

than 8 years.

• Children should be supervised to

ensure that they do not play with

the machine.

• Do not use the machine if the

plug, the mains cord or the

machine itself is damaged.

• If the mains cord is damaged, you

must have it replaced by Philips,

a service centre authorised

by Philips or similarly qualied

persons in order to avoid a hazard.

Caution

• Always return the machine to

a service centre authorised by

Philips for examination or repair.

Do not attempt to repair the

machine yourself, otherwise your

guarantee becomes invalid.

• Do not use the machine in

combination with a transformer,

as this could cause hazardous

situations.

2 General description

1 1-cup pod holder q

2 2-cup pod holder qq

3 Coffee collector

4 Coffee spout

5 Milk spout

6 Milk tube

7 Cup tray

8 Removable drip tray

9 Water reservoir

10 Touch panel with recipe buttons

11 CALC button

12 Café Latte button

13 Latte Macchiato button

14 Cappuccino button

15 Cup indicators

16 On/off button

17 Regular coffee button

18 Strong coffee button

19 Milk only button

3 Important

Read this user manual carefully before

you use the machine and save it for

future reference.

Danger

• Never immerse the machine in

water or any other liquid.

Warning

• Check if the voltage indicated

on the bottom of the machine

corresponds to the local mains

voltage before you connect the

machine.

5

4 Flushing the

machine before rst

use

It is important that you ush your SENSEO

®

coffee

machine before rst use. After the ushing cycle,

the machine is ready for brewing SENSEO

®

coffee.

C

Caution:

Never interrupt the ushing cycle halfway. If you

do, the boiler does not ll itself properly.

1 Tilt the water reservoir backwards (1) and lift

the water reservoir off the machine (2).

2 Fill the water reservoir.

• Always put the machine on a

at and stable surface. Keep it

in upright position, also during

transport.

• Do not place the machine on a

hotplate, directly next to a hot

oven or similar source of heat.

• Do not keep the machine at

temperatures below 0°. Water left

in the heating system may freeze

and cause damage.

• Never pour milk, coffee, hot water

or carbonated water into the

water reservoir.

• Never put normal ground coffee

or use torn pods in the machine,

as this causes it to become

blocked.

• Never ush the machine or let it

brew coffee when the spout is not

in place.

• This machine is intended for

normal household use only.

It is not intended for use in

environments such as staff

kitchens of shops, ofces, farms

or other work environments.

Nor is it intended to be used by

clients in hotels, motels, bed and

breakfasts and other residential

environments.

3.1 Compliance with standards

This Philips machine complies with all applicable

standards and regulations regarding exposure to

electromagnetic elds.

The energy consumption of this machine in

off mode is less than 0,5 watt. This means that

this machine complies with European Directive

2009/125/EC, which sets the ecological design

requirements for energy-using products.

ENGLISH

6

7 Put the plug in an earthed wall socket.

8 Press the on/off button. The button lights up

to indicate that you have to ush the machine.

9 To start ushing, press any of the recipe

buttons.

• During the ushing cycle, the boiler lls itself

with water from the water reservoir and

cold water comes out of the coffee spout.

During the ushing cycle, the machine

produces more noise than during a regular

brewing cycle.

3 Tilt the water reservoir and place the bottom

back onto the machine (1). Then press the top

of the water reservoir towards the machine (2).

4 Slide the milk spout onto the machine. Make

sure you attach the milk spout by sliding it

over the guiding rails on the coffee spout. You

hear a click sound when the spout is attached

properly.

5 Place a bowl with a capacity of at least 1 litre

under the coffee spout.

6 Make sure a pod holder, without pod or pods,

is in place.

7

3 Press the on/off button. The on/off button

ashes slowly while the water heats up.

D

Note:

If the on/off button ashes rapidly, the water

reservoir does not contain enough water for

brewing one cup of coffee.

4 Pull the lid lever upwards to open the lid.

5 If you want to make one cup of SENSEO

®

coffee, place the 1-cup pod holder q in the

machine (1). If you want to make two cups,

put the 2-cup pod holder qq in the machine

(2). Make sure the pod holder is clean.

• When all the water in the water reservoir

has been used up, the ushing cycle is

nished and the machine switches off. You

may notice some steam coming from the

machine, this is normal.

10 Fill the water reservoir with fresh tap water

and place it back onto the machine.

5 Brewing black

SENSEO

®

coffee

1 Make sure that the water reservoir is lled

with fresh cold tap water.

E

Tip:

Use fresh water every day.

2 Put the plug in an earthed wall socket.

ENGLISH

8

D Note:

You can adjust the height of the drip tray

or remove the drip tray to be able to place

higher cups.

D

Note

The cups you use should have a capacity of at

least 150ml when you brew regular coffee or

100ml when you brew strong coffee. Do not

use cups that are too large, as they cause the

coffee to get cold more quickly.

9 Press the button with two coffee beans for a

regular cup of coffee. Press the button with

three coffee beans for a strong cup of coffee.

10 Press the recipe button once for one cup of

coffee or twice for two cups of coffee.

11 When the water has heated up and the on/

off button lights up continuously, the machine

automatically starts brewing coffee.

D

Note:

Do not remove the water reservoir during a

brewing cycle.

12 When the coffee is ready, remove the used

coffee pod or pods. Simply lift the pod holder

out of the machine and empty it.

C

Caution:

There may still be some hot water/coffee on

the coffee pod or pods.

13 After use, press the on/off button to switch

off the machine.

6 Place 1 coffee pod in the 1-cup pod holder

q (1) or place 2 coffee pods in the 2-cup

pod holder qq (2). Place the pod or pods

properly in the centre of the pod holder, with

the convex side pointing downwards. Press

the pod or pods lightly into the pod holder.

D

Note:

Make sure the coffee in the pod or pods is

evenly distributed.

C

Caution:

Never put normal ground coffee or use torn

pods in the SENSEO

®

machine, as this causes

it to become blocked.

7 Close the lid and lock the lever.

8 Place one cup or two cups under the spout

openings. Use the markings on the drip tray to

place the cup or cups.

9

D Note:

If the on/off button ashes rapidly, the water

reservoir does not contain enough water for

brewing one cup of coffee.

4 Pull the lid lever upwards to open the lid.

5 If you want to make one cup of cappuccino,

café latte or latte macchiato, place the 1-cup

pod holder q in the machine (1). If you want

to make two cups, put the 2-cup pod holder

qq in the machine (2). Make sure the pod

holder is clean.

D

Note:

For warm milk only, you do not have to place

a pod holder in the machine. Proceed with

step 7.

D Note:

If you do not use the machine, it switches off

automatically after 15 minutes to save energy.

6 Brewing a coffee

speciality with fresh

milk

With the SENSEO

®

coffee machine you can easily

create the perfect cappuccino, café latte, latte

macchiato or warm milk only with two cups at the

same time.

1 Make sure that the water reservoir is lled

with fresh cold tap water.

E

Tip:

Use fresh water every day.

2 Put the plug in an earthed wall socket.

3 Press the on/off button. The on/off button

ashes slowly while the water heats up.

ENGLISH

10

9 Insert the connector of the milk tube into the

milk spout (1). Place the other end of the milk

tube in a milk carton or jar (2).

E

Tip:

Use fresh chilled milk. We recommend semi

skimmed fresh cow’s milk to get the best milk

froth.

D

Note:

To prevent steam from coming out of the milk

spout, make sure there is enough milk in the

carton or jar.

10 Place one cup or two cups under the spout

openings. You can adjust the drip tray or

remove the drip tray to be able to place

higher cups.

11 Press the recipe button of your choice to select

the desired coffee speciality. You can choose

between cappuccino, café latte, latte macchiato

or warm milk only. Press the recipe button

once for one cup or twice for two cups.

6 Place 1 coffee pod in the 1-cup pod holder

q (1) or place 2 coffee pods in the 2-cup

pod holder qq (2). Place the pod or pods

properly in the centre of the pod holder, with

the convex side pointing downwards. Press

the pod or pods lightly into the pod holder.

D

Note:

Make sure the coffee in the pod or pods is

evenly distributed.

C

Caution:

Never put normal ground coffee or use torn

pods in the SENSEO

®

machine, as this causes

it to become blocked.

7 Close the lid and lock the lever.

8 Slide the milk spout onto the machine. Make

sure you attach the milk spout by sliding it

over the guiding rails on the coffee spout. You

hear a click sound when the spout is attached

properly.

11

D Note:

If you do not use the machine, it switches off

automatically after 15 minutes to save energy.

7 Adjusting the coffee

volume

Note: this function is only available for type

number HD7858, HD7857.

7.1 Adjusting the coffee volume

to your personal taste

You can adjust the volume of each recipe to your

own personal taste by programming the different

recipes.

1 Switch on the appliance.

2 Fill the water reservoir with cold water up to

the MAX indication.

3 Put a coffee pod in the pod holder.

4 If you want to prepare a coffee speciality with

milk, put the tube of the milk spout into a

carton or jar of milk.

5 Press the CALC button and the button for

the recipe you want to adjust simultaneously.

Release the buttons when the appliance

beeps twice after approximately two seconds.

12 When the water has heated up and the on/

off button lights up continuously, the machine

starts to create the selected coffee speciality

with milk.

D

Note:

The machine rst brews milk and then adds

the coffee. In case of café latte, the machine

rst adds coffee and then brews milk.

13 When the coffee is ready, remove the used

coffee pod or pods. Simply lift the pod holder

out of the machine and empty it.

C

Caution:

There may still be some hot water/coffee on

the coffee pod or pods.

14 Remove the milk spout and tube from

the machine and clean them (see chapter

‘Cleaning the milk spout’).

15 After use, press the on/off button to switch

off the machine.

ENGLISH

12

D Note:

If you do not plan to froth milk again straight

away, rinse the milk spout and milk tube within 30

minutes after use.

D

Note:

After the last use of the day, clean the milk spout

and milk tube thoroughly.

8.1.1 Rinsing after every use

1 Put the milk tube in a cup of clean water.

2 Place an empty cup under the spout.

3 Press the milk only button.

The machine rinses all milk residues from the

milk spout and milk tube with clean hot water.

• The 1-cup symbol starts to ash.

6 Press one of the following buttons to change

the coffee volume: the regular coffee button

for a larger cup, the milk only button for a

medium cup (default setting) or the strong

coffee button for a smaller cup.

• The appliance beeps three times to conrm

and starts to brew a coffee recipe according

to the new setting.

The appliance saves the setting automatically.

8 Cleaning

Regular cleaning of your SENSEO

®

is important

to ensure that the SENSEO

®

coffee always tastes

optimally and to optimise the lifetime of the

coffee machine.

B

Warning:

Never immerse the SENSEO

®

coffee machine in

water.

8.1 Cleaning the milk spout

For a reliable performance of the milk spout

and consistently good frothing results, it is

important to clean the milk spout and milk tube

regularly and thoroughly. The milk spout can be

disassembled completely, which allows you to

remove all milk residues from it.

13

5 The frothing system can be separated into

two parts. Open the spring to separate the

parts.

6 Remove the inside part of the frothing system

by pulling it downwards.

7 Remove the small lid by pulling it upwards.

8.1.2 After the last use of the day

Clean the milk tube and the milk spout in the

dishwasher or in hot water with some washing-up

liquid.

D

Note:

Cleaning in the dishwasher is recommended.

1 Pull the milk tube out of the milk spout.

2 To remove the milk spout from the machine,

pull it towards you.

3 Remove the top part of the milk spout from

the bottom part by pulling it rmly.

4 Take out the frothing system.

ENGLISH

14

4 Place the frothing system in the bottom part

of the milk spout.

5 Place the top part of the milk spout back

onto the bottom part.

8.2 Cleaning the coffee spout

and the machine

1 Always unplug the machine before you clean it.

2 To remove the coffee spout from the

machine, pull it towards you.

3 Remove the top part of the coffee spout from

the bottom part by pulling it rmly.

8 Clean all parts in the dishwasher or with hot

water and some washing-up liquid.

8.1.3 Reassembling the milk spout

1 Place the small lid back on the frothing system.

2 Place the inside part back into the frothing

system.

3 Close the spring to lock the two parts

together.

15

9 Descaling

Scale builds up inside the machine during use. It is

essential to descale the SENSEO

®

coffee machine

when the CALC light goes on.

When to descale

• Descale the SENSEO

®

coffee machine as

described below when the CALC button

lights up (after you have brewed approx. 400

cups of SENSEO

®

coffee).

Why to descale

Your reasons to descale:

• It prolongs the life of your SENSEO

®

coffee

machine

• It ensures maximum cup volume

• It ensures maximum coffee temperature

• The machine produces less sound during

brewing

• It prevents malfunctioning

If the descaling procedure is not performed

correctly, scale residue remains behind in the

machine. This causes scale to build up more

quickly and may cause permanent and irreparable

damage to the machine.

Use the correct descaling agent

Use SENSEO

®

Descaler (HD7012, HD7011) only.

It has been developed to ensure better machine

performance and operation. Each descaling

mixture can be used only once. For more

information about this descaler, visit our website

www.philips.com.

B

Warning:

Never use a descaling agent based on mineral

acids such as sulphuric acid, hydrochloric acid,

sulphamic acid and acetic acid (e.g. vinegar).

These descaling agents may damage your

SENSEO

®

coffee machine.

9.1 Descaling procedure

The CALC button lights up to indicate you

have to descale your machine. The descaling

procedure consists of a descaling cycle and 3

ushing cycles. Do not interrupt the descaling

cycle and do not switch off the machine before

you have performed the ushing cycles. The whole

procedure takes approximately 60 minutes.

4 Clean the outside of the machine with a moist

cloth.

5 Clean the water distribution disc and the

rubber sealing ring with a moist cloth.

6 Clean the water inlet on the machine with a

moist cloth.

7 Clean the water reservoir, the coffee spout,

the coffee collector, the drip tray, the cup tray,

the milk tube, the milk spout and the pod

holders in hot water or in the dishwasher.

C

Caution:

Be careful not to damage the valve in the

bottom of the water reservoir if you use

a washing-up brush to clean the water

reservoir.

D

Note:

Check if the sieve in the centre of the pod

holder is clogged. If this is the case, unclog the

sieve by rinsing the pod holder under the tap.

If necessary, use a washing-up brush to clean

the sieve.

8 When you are nished with cleaning, place

the top part of the coffee spout back onto

the bottom part.

9 Place the water reservoir, the coffee collector

and the drip tray back into the machine.

10 Slide the coffee spout into the machine.

11 Put the plug the back in the wall socket.

ENGLISH

16

4 Place the 1-cup pod holder q with a used

coffee pod in it in the machine. Close the lid

and make sure it is properly locked.

D

Note:

Always put a used coffee pod in the pod

holder when you descale the machine. This

pod serves as a ‘lter’ to prevent the sieve or

hole in the pod holder from getting clogged

with scale residue.

B

Warning:

Make sure the lid is closed properly and the

lid lever is locked before you start descaling

the machine.

5 Put a bowl with a capacity of at least 1 litre

under the spout to collect the descaling

solution.

B Warning:

Make sure you place the milk spout for proper

descaling.

D

Note:

You can always descale your machine before the

appliance indicates it is necessary, follow the steps

below.

1 Mix the descaler with 1 litre of water in

a measuring jug. Stir until the powder has

dissolved. Fill the water reservoir with the

descaling solution.

2 Tilt the water reservoir and place the bottom

back onto the machine (1). Then press the top

of the water reservoir towards the machine (2).

3 Press the on/off button. The on/off button

ashes slowly while the water heats up. The

machine is ready for descaling when the on/

off button lights up continuously.

17

2 Press the CALC button to start the ushing

cycle. The water ows continuously for

approximately 5 minutes.

3 Wait until the machine has completed the

ushing cycle. The on/off button ashes quickly

and the CALC button ashes slowly.

4 Empty the bowl and place it back under the

spout.

5 Repeat steps 1 to 4 twice to complete the

ushing procedure. When the last ushing

cycle is complete, the machine switches off

automatically.

10 Ordering accessories

To buy accessories or spare parts, visit

www.shop.philips.com/service or go to your

Philips dealer. You can also contact the Philips

Consumer Care Centre in your country (see the

worldwide guarantee leaet for contact details).

11 Environment

• Do not throw away the machine with the

normal household waste at the end of its life,

but hand it in at an ofcial collection point for

recycling. By doing this, you help to preserve

the environment.

6 The machine is ready for descaling when

the on/off button and CALC button light up

continuously. Press the CALC button until the

machine beeps twice to start the descaling cycle.

7 The descaling cycle is in progress. During the

descaling cycle, the descaling solution comes

out of the machine in intervals. During the

last 5 minutes the descaling solution ows

continuously.

B

Warning:

Do not interrupt the descaling cycle.

8 When all the descaling solution in the water

reservoir has been used up after approximately

50 minutes, the on/off button ashes quickly

and CALC button ashes slowly.

9 Empty the bowl and place it back under the

spout.

10 Remove the used coffee pod from the pod

holder.

9.1.1 Flushing cycles:

1 Rinse and ll the water reservoir with fresh

water until the MAX indication. Place it back

onto the machine.

ENGLISH

18

The on/off light ashes quickly.

• There is not enough water in the water reservoir.

Fill the water reservoir and make sure you

place the reservoir properly into the machine.

• The oat in the water reservoir might be stuck.

Empty the water reservoir and shake it a few

times to release the oat. Clean the water

reservoir with hot water and some washing-up

liquid or in the dishwasher.

• You are using the machine at an ambient

temperature below 10*C.

Only use the machine at an ambient

temperature above 10*C.

• If these solutions do not solve the problem,

contact the Philips Consumer Care Centre in

your country.

The CALC light is on continuously.

• You need to descale the machine.

• Perform the descaling procedure as described

in chapter ‘Descaling’. Do not switch off the

machine during descaling.

The CALC light is on continuously after descaling.

• The descaling procedure has not been completed.

• Perform the descaling procedure as described

in chapter ‘Descaling’. Do not switch off the

machine during descaling.

The CALC light ashes.

• The descaling procedure is in progress.

• Let the machine complete the descaling

procedure. See chapter ‘Descaling’.

The on/off lights ashes quickly and the CALC

light ashes slowly.

• The water reservoir is empty.

• Rinse and ll the water reservoir and make

sure you place the reservoir properly into the

machine. Press the CALC button to continue

the descaling procedure as described in

chapter ‘Descaling’.

12 Guarantee and

support

If you need information or support, please

visit www.philips.com/support or read the

separate worldwide guarantee leaet.

The purchase of the Philips SENSEO

®

coffee

machine does not exhaust any of the rights of D.E.

Master Blenders 1753 or Philips under any of their

patents nor does it confer upon the purchaser a

licence under these patents.

Always return the machine to a service centre

authorised by Philips for examination or repair.

Do not attempt to repair the machine yourself,

otherwise your guarantee becomes invalid.

13 Troubleshooting

13.1 SENSEO

®

coffee machine

This chapter summarises the most common

problems you could encounter with the machine.

If you are unable to solve the problem with the

information below, visit www.philips.com/

support for a list of frequently asked questions or

contact the Consumer Care Centre in your country.

The on/off light is on continuously.

• You need to ush the machine before rst use.

Flush the machine before rst use, see chapter

‘Flushing the machine before rst use’.

• The machine is ready to brew.

The on/off light ashes slowly.

• The machine is heating up.

• If this takes longer than two minutes, contact the

Philips Consumer Care Centre in your country.

19

The SENSEO

®

machine does not produce good

or enough frothed milk.

• There is not enough milk in the milk carton or jar.

• Make sure the milk carton or jug contains

enough milk.

• Make sure the milk tube is properly

connected into the milk spout and the tube is

properly placed in the milk carton or jar.

• The milk is not cold enough.

Make sure you use cold milk straight from the

refrigerator (5°C-8°C).

• You did not use cow’s milk.

To achieve the best frothing results we advise

you to use semi-skimmed cow’s milk at

refrigerator temperature (5°C-8°C).

• The milk froth quality decreases over time.

The milk spout and milk tube may be dirty.

Disassemble all the parts of the milk spout and

milk tube. Clean them thoroughly with a brush

and some washing-up liquid or put them in the

dishwasher. See chapter ‘Cleaning the milk spout’.

• The coffee machine is clogged by scale and

needs to be descaled.

Perform the descaling procedure as described

in chapter ‘Descaling’.

The milk froth continues to ow from the milk spout.

• The milk continues to ow more than a few

seconds.

• Make sure you place the milk carton or jar on

the same level as the coffee machine.

• I cannot open the lid.

• Overpressure may have temporarily formed

under the lid.

• Switch of the coffee machine. Pull up the lever

and wait 24 hours before you open the lid.

You may need to use some force.

• Always make sure the pod holders are clean

and the centre of the sieve is not clogged to

prevent over pressure.

One cup indicator lights up.

• You pressed the recipe button once to brew

one cup of coffee.

• Press the recipe button once more if you

want to brew two cups of coffee. In this case,

both cup indicators light up.

Two cup indicators light up.

• You pressed the recipe button twice for two

cups of coffee.

• If you want to brew just one cup of coffee,

press the recipe button once more. In this

case, only one cup indicator lights up.

The coffee is not hot enough.

• The machine has been used for a longer

period of time without descaling.

Perform the descaling procedure as described

in chapter ‘Descaling’.

• The coffee temperature quickly decreases in

the cup.

• Do not use cups that are too large.

• Use thin-walled cups. Thin-walled cups absorb

less heat from the coffee than thick-walled cups.

• You can preheat the coffee machine and cup

by brewing a cup of hot water rst without

placing a coffee pod in the pod holder.

• The coffee speciality with fresh milk is not hot

enough.

• This is normal. A milk-based coffee recipe

is less hot than a cup of black coffee. Milk is

heated to a lower temperature to ensure

high-quality milk froth.

The touch panel with recipe buttons does not work.

• There may be water on the touch panel.

• Make sure your hands and the touch panel

are dry when you choose a coffee recipe.

• Make sure that the voltage indicated on the

coffeemaker corresponds to the local mains

voltage.

ENGLISH

20

1 Einführung

Herzlichen Glückwunsch zu Ihrem Kauf und

willkommen bei Philips! Um die Unterstützung

von Philips optimal nutzen zu können, registrieren

Sie Ihr Produkt bitte unter www.philips.com/

welcome.

1.1 SENSEO

®

Kaffeesystem

Mit SENSEO

®

erleben Sie einen sensationellen

Kaffeegenuss. Dieses einzigartige System

kombiniert die einfach zu bedienende Philips

SENSEO

®

Kaffeepadmaschine mit den speziell

von D.E Master Blenders SENSEO

®

entwickelten

Kaffeepads: Das Ergebnis ist eine perfekte Tasse

Kaffee mit einem weichen, vollen Aroma und einer

köstlichen Crema.

Kaffee von D.E Master Blenders in praktischen

SENSEO

®

Kaffeepads und das einzigartige

SENSEO

®

Brühsystem von Philips sind perfekt

aufeinander abgestimmt, sodass sich das volle

Aroma des Kaffees entfalten kann. Unter

www.senseo.com nden Sie alle SENSEO

®

Kaffeesorten.

Beachten Sie folgende Tipps, um stets den vollen

und aromatischen Kaffeegeschmack zu erhalten:

Frische Kaffeepads

Verwenden Sie die speziell von D.E Master

Blenders für Ihre SENSEO

®

Kaffeepadmaschine

entwickelten SENSEO

®

Kaffeepads für ein

weiches, volles Aroma. Die D.E Master Blenders

SENSEO

®

Kaffeepads bleiben länger frisch, wenn

Sie sie in einem luftdichten Behälter aufbewahren.

Frisches Wasser

Verwenden Sie täglich frisches Wasser. Wenn

die Kaffeepadmaschine einen Tag lang nicht in

Gebrauch war, lassen Sie vor dem nächsten

Aufbrühen frisches Wasser durchlaufen.

Inhaltsangabe

1 Einführung 20

1.1 SENSEO

®

Kaffeesystem 20

2 Allgemeine Beschreibung 21

3 Wichtig 21

3.1 Normerfüllung 22

4 Die Maschine vor dem ersten

Gebrauch durchspülen 22

5 Schwarzen SENSEO

®

Kaffee

zubereiten 24

6 Eine Kaffeespezialität mit frischer

Milch zubereiten 26

7 Die Kaffeemenge einstellen 29

7.1 Die Kaffeemenge nach Ihrem

persönlichen Geschmack einstellen 29

8 Pege 30

8.1 Den Milchausgießer reinigen 30

8.2 Den Kaffeeauslauf und die Maschine

reinigen 32

9 Entkalken 33

9.1 Entkalkungsvorgang 34

10 Zubehör bestellen 36

11 Umwelt 36

12 Garantie und Support 36

13 Fehlerbehebung 36

13.1 SENSEO

®

Kaffeepadmaschine 36

DEUTSCH

La page charge ...

Philips HD7857/50 Le manuel du propriétaire

Ce manuel convient également à

Philips HD7857/50 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents