Pioneer BCS-313 Le manuel du propriétaire

P/NO: MFL67205104

ENGLISH

FRANÇAIS

DEUTSCH ITALIANO ESPAÑOL

NEDERLANDS

BCS-717

XV-BD717W

S-BD707T

S-BD707SW

BCS-313

XV-BD717W

S-BD303

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

Français

Deutsch

Italiano

Nederlands

Español

English

HB916-RD0_BDEUPPK_ENG.indd 1 2011-06-02 �� 11:09:10

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral triangle

is intended to alert the user to the

presence of uninsulated dangerous

voltage within the product’s

enclosure that may be of sucient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature accompanying the

product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

VENTILATION CAUTION: When installing this

unit, make sure to leave space around the unit for

ventilation to improve heat radiation (at least 10 cm

at top, 10 cm at rear, and 10 cm at each side).

WARNING: Slots and openings in the cabinet are

provided for ventilation to ensure reliable operation

of the product, and to protect it from overheating.

To prevent re hazard, the openings should

never be blocked or covered with items (such as

newspapers, table-cloths, curtains) or by operating

the equipment on thick carpet or a bed.

Operating Environment: Operating environment

temperature and humidity: +5 °C to +35 °C (+41

°F to +95 °F); less than 85 %RH (cooling vents not

blocked)

Do not install this unit in a poorly ventilated area,

or in locations exposed to high humidity or direct

sunlight (or strong articial light)

CAUTION: This product is a class 1 laser product

classied under the Safety of laser products,

IEC60825-1:2007.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try

to open the enclosure. Visible laser radiation when

open. DO NOT STARE INTO BEAM.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. To

disconnect power from the mains, pull out the

mains cord plug. When installing the product,

ensure that the plug is easily accessible.

HB916-RD0_BDEUPPK_ENG.indd 2 2011-06-02 �� 11:09:11

Getting Started 3

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION:

y

Do not use or store batteries in direct sunlight or

other excessively hot place, such as inside a car

or near a heater. This can cause batteries to leak,

overheat, explode or catch re. It can also reduce

the life or performance of batteries.

y

When disposing of used batteries, please comply

with governmental regulations or environmental

public instruction's rules that apply in your

country or area.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Information for users on collection and disposal

of old equipment and used batteries

Symbol examples

for batteries

Pb

These symbols on the products, packaging, and/

or accompanying documents mean that used

electrical and electronic products and batteries

should not be mixed with general household

waste.

For proper treatment, recovery and recycling of

old products and used batteries, please take them

to applicable collection points in accordance with

your national legislation.

By disposing of these products and batteries

correctly, you will help to save valuable resources

and prevent any potential negative eects on

human health and the environment which could

otherwise arise from inappropriate waste handling.

For more information about collection and

recycling of old products and batteries, please

contact your local municipality, your waste disposal

service or the point of sale where you purchased

the items.

These symbols are only valid in the European

Union.

For countries outside the European Union:

If you wish to discard these items, please contact

your local authorities or dealer and ask for the

correct method of disposal.

HB916-RD0_BDEUPPK_ENG.indd 3 2011-06-02 �� 11:09:11

Getting Started4

Getting Started

1

For Wireless product European Union Notice

PIONEER hereby declares that

this/these product(s) is/are in

compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC, 2004/108/EC, 2006/95/EC

and 2009/125/EC.

Indoor Use Only

RF Radiation Exposure Statement

This equipment should be installed and operated

with minimum distance 20 cm between the

radiator and your body.

WARNING: To prevent a re hazard, do not place

any naked ame sources (such as a lighted candle)

on the equipment.

WARNING: Before plugging in for the rst time, read

the following section carefully.

The voltage of the available power supply

diers according to country or region. Be sure

that the power supply voltage of the area

where this unit will be used meets the required

voltage (e.g., 230 V or 120 V) written on the rear

panel.

CAUTION: The

1

STANDBY/ON switch on this

unit will not completely shut o all power from

the AC outlet. Since the power cord serves as

the main disconnect device for the unit, you will

need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit

has been installed so that the power cord can be

easily unplugged from the AC outlet in case of

an accident. To avoid re hazard, the power cord

should also be unplugged from the AC outlet when

left unused for a long period of time (for example,

when on vacation).

CAUTION: This product is for general household

purposes. Any failure due to use for other than

household purposes (such as long-term use for

business purposes in a restaurant or use in a car or

ship) and which requires repair will be charged for

even during the warranty period.

Notes on Copyrights

y

Because AACS (Advanced Access Content

System) is approved as content protection

system for Blu-ray Disc format, similar to use of

CSS (Content Scramble System) for DVD format,

certain restrictions are imposed on playback,

analog signal output, etc., of AACS protected

contents. The operation of this product and

restrictions on this product may vary depending

on your time of purchase as those restrictions

may be adopted and/or changed by AACS after

the production of this product.

y

Furthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems

for Blu-ray Disc format, which imposes certain

restrictions including playback restrictions for

BD-ROM Mark and/or BD+ protected contents.

To obtain additional information on AACS, BD-

ROM Mark, BD+, or this product, please contact

an authorized Customer Service Center.

y

Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only

connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

y

This item incorporates copy protection

technology that is protected by U.S. patents

and other intellectual property rights of

Rovi Corporation. Reverse engineering and

disassembly are prohibited.

y

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/

or criminal liability.

HB916-RD0_BDEUPPK_ENG.indd 4 2011-06-02 �� 11:09:11

Getting Started 5

Getting Started

1

Important Notice for TV colour

system

The colour system of this player diers according to

currently playing discs.

For example, when the player plays the disc

recorded in the NTSC colour system, the image is

output as an NTSC signal.

Only the multi system colour TV can receive all

signals output from the player.

y

If you have a PAL colour system TV, you will see

just distorted images when using discs or video

contents recorded in NTSC.

y

The multi system colour TV changes the colour

system automatically according to input signals.

In case that the colour system is not changed

automatically, turn it o and then on to see

normal images on screen.

y

Even if the disc recorded in NTSC colour system

are well displayed on your TV, these may not be

recorded correctly on your recorder.

HB916-RD0_BDEUPPK_ENG.indd 5 2011-06-02 �� 11:09:11

Table of Contents6

Table of Contents

1 Getting Started

2 Safety Information

8 Introduction

8 – Playable Discs and symbols used in

this manual

9 – About the “7” Symbol Display

10 – Supplied Accessories

10 – Accessories of speaker box

(S-BD707T)

10 – Accessories of speaker box

(S-BD707SW)

10 – Accessories of speaker box

(S-BD303)

11 – File compatibility

12 – AVCHD (Advanced Video Codec High

Deﬁnition)

12 – About DLNA

13 – Certain System Requirements

13 – Regional Code

13 – Compatibility Notes

14 Remote control

15 Front panel

15 Rear panel

2 Connecting

16 Assemble the speakers

16 – Speaker Setup for BCS-717

18 – Speaker Setup for BCS-313

19 Wall mounting the center speaker

19 – Before mounting

19 Additional notes on speaker

20 Positioning the system

21 Connecting to Your TV

21 – HDMI Connection

22 – ARC (Audio Return Channel) function

23 – Component Video Connection

23 – Video Connection

24 – Resolution Setting

24 Antenna connection

25 Connections with external device

25 – AUX Connection

25 – PORTABLE IN connection

26 – OPTICAL IN connection

26 – HDMI IN 1/2 connection

27 Connecting to your Home Network

27 – Wired network connection

28 – Wired Network Setup

29 – Wireless Network Connection

29 – Wireless Network Setup

32 USB device connection

32 – Playback content in the USB device

3 System Setting

33 Settings

33 – Adjust the Setup Settings

33 – [DISPLAY] Menu

35 – [LANGUAGE] Menu

35 – [AUDIO] Menu

36 – [LOCK] Menu

37 – [NETWORK] Menu

38 – [OTHERS] Menu

39 Sound Effect

4 Operating

40 General Playback

40 – Using [HOME] menu

40 – Playing a Disc

40 – Playing a ﬁle on a disc/USB device

41 – Playing Blu-ray 3D disc

41 – Enjoying BD-Live™

42 – Playing a ﬁle on a network server

43 – Basic operations for video and audio

content

43 – Basic operations for photo content

43 – Using the disc menu

44 – Resume playback

45 Advanced Playback

45 – Repeat Playback

45 – Repeating a speciﬁc portion

45 – Enlarge the playback image

46 – Marker Search

46 – Using the search menu

47 – Selecting a subtitle ﬁle

47 – Last Scene Memory

HB916-RD0_BDEUPPK_ENG.indd 6 2011-06-02 �� 11:09:11

Table of Contents 7

1

2

3

4

5

6

48 – Options while viewing a photo

48 – Listening to music while slide show

49 On-Screen display

49 – Displaying content information on-

screen

50 – Playing from selected time

50 – Hearing a different audio

50 – Selecting a subtitle language

50 – Watching from a different angle

51 – Changing the TV Aspect Ratio

51 – Changing subtitle code page

51 – Changing the Picture Mode

52 Audio CD Recording

53 Playing the iPod

53 – Enjoying iPod on the screen

54 – Enjoying the iPod IN mode

55 Radio Operations

55 – Presetting the Radio Stations

55 – Deleting a saved station

55 – Deleting all the saved stations

55 – Improving poor FM reception

55 – See information about a radio station

56 Using the Online

5 Troubleshooting

57 Troubleshooting

57 – General

58 – Network

59 – Picture

59 – Sound

59 – Updates

6 Appendix

60 Controlling a TV with the Supplied

Remote Control

60 – Setting up the remote to control your

TV

61 Area Code List

62 Language code List

63 Trademarks and Licenses

65 Video Output Resolution

66 Speciﬁcations

69 Maintenance

69 – Handling the Unit

69 – Notes on Discs

70 Important Information Relating to

Network Services

70 Software License Notice

HB916-RD0_BDEUPPK_ENG.indd 7 2011-06-02 �� 11:09:11

Getting Started8

Getting Started

1

Introduction

Playable Discs and symbols used in this manual

Media/Term Logo Symbol Description

Blu-ray

e

y

Discs such as movies that can be purchased or

rented.

y

“Blu-ray 3D” discs

y

BD-R/RE discs that are recorded in BDAV format.

y

u

i

y

BD-R/RE discs that contain Movie, Music or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

(8 cm /

12 cm)

r

y

Discs such as movies that can be purchased or

rented.

y

Video mode and nalized only

y

Supports the dual layer disc also

o

Finalized AVCHD format

y

u

i

y

DVD±R/RW discs that contain Movie, Music or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

DVD-RW

(VR)

(8 cm /

12 cm)

r

VR mode and nalized only

Audio CD

(8 cm /

12 cm)

t

Audio CD

CD-R/RW

(8 cm /

12 cm)

y

u

i

y

CD-R/RW discs that contain Movie, Music or

Photo les.

y

ISO 9660+JOLIET, UDF and UDF Bridge format

Note –

,

Indicates special notes and operating features.

Caution –

>

Indicates cautions for preventing possible

damages from abuse.

HB916-RD0_BDEUPPK_ENG.indd 8 2011-06-02 �� 11:09:12

Getting Started 9

Getting Started

1

y

Depending on the conditions of the

recording equipment or the CD-R/RW (or

DVD±R/RW) disc itself, some CD-R/RW (or

DVD±R/RW) discs cannot be played on the

unit.

y

Depending on the recording software & the

nalization, some recorded discs (CD-R/RW,

DVD±R/RW, BD-R/RE) may not be playable.

y

BD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a

DVD or CD Recorder may not play if the

disc is damaged or dirty, or if there is dirt or

condensation on the player’s lens.

y

If you record a disc using a personal

computer, even if it is recorded in a

compatible format, there are cases in which

it may not play because of the settings of

the application software used to create the

disc. (Check with the software publisher for

more detailed information.)

y

This player requires discs and recordings to

meet certain technical standards in order to

achieve optimal playback quality.

y

Pre-recorded DVDs are automatically set to

these standards. There are many dierent

types of recordable disc formats (including

CD-R containing MP3 or WMA les) and

these require certain pre-existing conditions

to ensure compatible playback.

y

Customers should note that permission

is required in order to download MP3 /

WMA les and music from the Internet.

Our company has no right to grant such

permission. Permission should always be

sought from the copyright owner.

y

You have to set the disc format option

to [Mastered] in order to make the

discs compatible with the players when

formatting rewritable discs. When setting

the option to Live File System, you cannot

use it on the player. (Mastered/Live File

System : Disc format system for Windows

Vista® and Windows 7®)

y

BDXL cannot be supported.

,

Note

About the “

7

” Symbol Display

“

7

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

HB916-RD0_BDEUPPK_ENG.indd 9 2011-06-02 �� 11:09:12

Getting Started10

Getting Started

1

Supplied Accessories

Video cable (1) Remote control (1)

Battery (1)

FM antenna (1)

iPod cradle (1)

Accessories of speaker box

(S-BD707T)

Colour-coded Speaker

cables (5)

Screws (12)

Speaker stand bases (4) Small non-skid pads

(1)

Middle non-skid pads

(1)

Accessories of speaker box

(S-BD707SW)

Speaker cable (1) Large non-skid pads

(1)

Accessories of speaker box

(S-BD303)

Colour-coded Speaker

cables (6)

Small non-skid pads

(1)

Large non-skid pads (1)

HB916-RD0_BDEUPPK_ENG.indd 10 2011-06-02 �� 11:09:13

Getting Started 11

Getting Started

1

File compatibility

Movie ﬁles

File

Location

File

Extension

Codec Format Audio Format Subtitle

Disc,

USB

“.avi”, “.divx”,

“.mpg”, “.mpeg”,

“.mkv”, “.mp4”,

“.asf”, “.wmv”,

“.m4v” (DRM

free)

DIVX3.xx, DIVX4.xx,

DIVX5.xx, DIVX6.xx

(Standard playback

only), XVID, MPEG1 SS,

H.264/MPEG-4 AVC,

MPEG2 PS, MPEG2 TS,

VC-1 SM (WMV3)

Dolby Digital,

DTS, MP3,

WMA, AAC,

AC3

SubRip (.srt / .txt), SAMI (.smi),

SubStation Alpha (.ssa/.txt),

MicroDVD (.sub/.txt), VobSub

(.sub), SubViewer 1.0 (.sub),

SubViewer 2.0 (.sub/.txt), TMPlayer

(.txt), DVD Subtitle System (.txt)

DLNA, PC

“.avi”, “.divx”,

“.mpg”, “.mpeg”,

“.mkv”, “.mp4”,

“.asf”, “.wmv”

(DRM free)

DIVX3.xx, DIVX4.xx,

DIVX5.xx, DIVX6.xx,

XVID, MPEG1 SS,

H.264/MPEG-4 AVC,

MPEG2 PS, MPEG2 TS,

VC-1 SM (WMV3)

Dolby Digital,

DTS, MP3,

WMA, AAC,

AC3

SubRip (.srt / .txt), SAMI (.smi),

SubStation Alpha (.ssa/.txt),

MicroDVD (.sub/.txt), SubViewer

1.0 (.sub), SubViewer 2.0 (.sub/.

txt), TMPlayer (.txt), DVD Subtitle

System (.txt)

Music ﬁles

File

Location

File

Extension

Sampling Frequency Bitrate Note

Disc,

USB,

DLNA, PC

“mp3”, “.wma”,

“.wav”, “.m4a”

(DRM free)

within 32 - 48 kHz (WMA),

within 16 - 48 kHz (MP3)

within 20 - 320 kbps

(WMA), within

32 - 320 kbps (MP3)

Some wav les are

not supported on this

player.

Photo ﬁles

File

Location

File

Extension

Recommanded

Size

Note

Disc,

USB,

DLNA, PC

“.jpg”, “.jpeg”,

“.png”

Less than 4,000 x 3,000 x 24 bit/pixel

Less than 3,000 x 3,000 x 32 bit/pixel

Progressive and lossless

compression photo image les

are not supported.

HB916-RD0_BDEUPPK_ENG.indd 11 2011-06-02 �� 11:09:13

Getting Started12

Getting Started

1

y

The le name is limited to 180 characters.

y

Maximum les/folder: Less than 2 000

(total number of les and folders)

y

Depending on the size and number of the

les, it may take several minutes to read the

contents on the media.

y

File compatibility may dier depending on

the server.

y

The le requirements on page 11 are not

always compatible. There may have some

restrictions by le features and media

server’s ability.

y

Playing a movie subtitle les are not

supported on this player.

y

The les from removable media such as USB

drive, DVD-drive etc. on your media server

may not be shared properly.

y

This unit cannot support the ID3 Tag

embedded MP3 le.

y

The total playback time of audio le

indicated on the screen may not correct for

VBR les.

y

HD movie les contained on the CD or USB

1.0/1.1 may not played properly. Blu-ray

Disc, DVD or USB 2.0 are recommended to

play back HD movie les.

y

This player supports H.264/MPEG-4 AVC

prole Main, High at Level 4.1. For a le

with higher level, the warning message will

appear on the screen.

y

This player does not support les that are

recorded with GMC

*

1

or Qpel

*

2

.

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

,

Note

AVCHD (Advanced Video

Codec High Deﬁnition)

y

This player can playback AVCHD format discs.

These discs are normally recorded and used in

camcorders.

y

The AVCHD format is a high denition digital

video camera format.

y

The MPEG-4 AVC/H.264 format is capable of

compressing images at higher eciency than

that of the conventional image compressing

format.

y

This player can playback AVCHD discs using

“x.v.Colour” format.

y

Some AVCHD format discs may not play

depending on the recording condition.

y

AVCHD format discs need to be nalized.

y

“x.v.Colour” oers a wider colour range than

normal DVD camcorder discs.

About DLNA

This Player is a DLNA Certied digital media player

that can display and play movie, photo and music

content from your DLNA-compatible digital media

server (PC and Consumer Electronics).

The Digital Living Network Alliance (DLNA) is a

cross-industry organization of consumer electronics,

computing industry and mobile device companies.

Digital Living provides consumers with easy sharing

of digital media through your home network.

The DLNA certication logo makes it easy

to nd products that comply with the DLNA

Interoperability Guidelines. This unit complies with

DLNA Interoperability Guidelines v1.5.

When a PC running DLNA server software or

other DLNA compatible device is connected to

this player, some setting changes of software or

other devices may be required. Please refer to the

operating instructions for the software or device for

more information.

HB916-RD0_BDEUPPK_ENG.indd 12 2011-06-02 �� 11:09:13

Getting Started 13

Getting Started

1

Certain System Requirements

For high denition video playback:

y

High denition display that has COMPONENT or

HDMI input jacks.

y

BD-ROM disc with high denition content.

y

HDMI or HDCP capable DVI input on your display

device is required for some content (as specied

by disc authors).

For playing les on your PC’s share folder via your

home network, the PC requires below.

y

Windows® XP (Service Pack 2 or higher),

Windows Vista® (no Service Pack required)

Windows 7® (no Service Pack required)

y

1.2 GHz Intel® Pentium® III or AMD

Sempron™ 2200+ processors

y

Network environment: 100 Mb Ethernet, WLAN

(IEEE 802.11a/b/g/n)

y

More than 1 folder on your PC has to be shared.

Visit support link of your operating system for

more information on le share settings.

Regional Code

This unit has a regional code printed on the rear of

the unit. This unit can play only BD-ROM or DVD

discs labeled same as the rear of the unit or “ALL”.

Compatibility Notes

y

Because BD-ROM is a new format, certain disc,

digital connection and other compatibility issues

are possible. If you experience compatibility

problems, please contact an authorized

Customer Service Center.

y

This unit allows you to enjoy functions such

as picture-in-picture, secondary audio and

Virtual packages, etc., with BD-ROM supporting

BONUSVIEW (BD-ROM version 2 Prole 1 version

1.1/ Final Standard Prole). Secondary video and

audio can be played from a disc compatible with

the picture-in-picture function. For the playback

method, refer to the instructions in the disc.

y

Viewing high-denition content and up-

converting standard DVD content may require a

HDMI-capable input or HDCP-capable DVI input

on your display device.

y

Some BD-ROM and DVD discs may restrict the

use of some operation commands or features.

y

Dolby TrueHD, Dolby Digital Plus and DTS-HD are

supported with maximum 5.1 channels if you

use HDMI connection for the audio output of the

unit.

y

You can use a USB device to store some disc

related information, including downloaded on-

line content. The disc you are using will control

how long this information is retained.

HB916-RD0_BDEUPPK_ENG.indd 13 2011-06-02 �� 11:09:13

Getting Started14

Getting Started

1

Remote control

1

2

3

Battery Installation

Remove the battery cover on

the rear of the Remote Control,

and insert an R03 (size AAA)

battery with

4

and

5

matched

correctly.

• • • • • • • • •

a

• • • • • • •

P

INPUT/TUNER: Changes

input mode.

1

(STANDBY/ON): Switches the

player ON or OFF.

B

OPEN/CLOSE: Opens and

closes the disc tray.

HDMI IN: Changes input mode

to HDMI IN directly.

OPTICAL: Changes input mode

to optical directly.

m

DISPLAY: Displays or exits

On-Screen Display.

n

HOME MENU: Displays or

exits the [Home Menu].

MENU: Accesses the menu on a

disc.

Direction buttons: Selects an

option in the menu.

b

ENTER: Acknowledges menu

selection.

TUNE (+/-): Tunes in the desired

radio station.

PRESET (

W/S

): Selects

programme of Radio.

• • • • • • • • •

b

• • • • • • •

x

RETURN: Exits the menu or

resumes playback. The resume

play function may not work

depending on the BD-ROM disc.

POPUP/ TOP MENU: Displays

the DVD title menu or BD-ROM’s

pop-up menu, if available.

Z

STOP: Stops playback.

z

PLAY: Starts playback.

M

PAUSE/STEP: Pauses playback.

C/V

SKIP: Goes to the

next or previous chapter / track /

le.

c/v

SCAN: Searches

backward or forward.

SPK LEVEL: Sets the sound level

of desired speaker.

X

USB REC: Records an audio

CD.

MUTE: Mute the unit.

SOUND: Selects a sound eect

mode.

VOL +/- : Adjusts speaker

volume.

• • • • • • • • •

c

• • • • • • •

0-9 numerical buttons: Selects

numbered options in a menu

or inputs letters in the keypad

menu.

MARKER: Marks any point

during playback.

SEARCH: Displays or exits the

search menu.

h

REPEAT: Repeats a desired

section or sequence.

DIMMER: Dims the light on the

unit.

ZOOM: Accesses the zoom

menu.

CLEAR: Removes a mark on the

search menu or a number when

setting the password.

Coloured (A, B, C, D) buttons:

Use to navigate on menus.

- A button (RDS): Radio Data

System.

- B button (PTY): Views the

programme type of the RDS.

- C button (PTY SEARCH):

Searches programme type.

- D button: Selects MONO or

STEREO in FM mode.

TV Control Buttons: See page

60.

SLEEP: Sets a certain period of

time after which the unit will

switch to o.

HB916-RD0_BDEUPPK_ENG.indd 14 2011-06-02 �� 11:09:14

Getting Started 15

Getting Started

1

Front panel

STANDBY/ON OPEN/CLOSE FUNCTION

TUNE

VOLUME

PORTABLE IN

5 V 500 mA

a

a b c d e f g h i j k

l

b

dc e f g

a

Disc Tray

b

Operation buttons

1

(STANDBY/ON) Button

Switches the player ON or OFF.

B

(OPEN/CLOSE)

FUNCTION

Changes the input source or function.

d

/

M

(PLAY / PAUSE)

Z

(STOP)

C/V

(SKIP)

- TUNE + (Radio tuning)

c

Display Window

d

Remote Sensor

e

PORTABLE IN

f

USB Port

g

Volume Control

Rear panel

STANDBY/ON OPEN/CLOSE FUNCTION

TUNE

VOLUME

PORTABLE IN

5 V 500 mA

a

a b c d e f g h i j k

l

b

dc e f g

a

AC power cord

b

Speakers connectors

c

Cooling Fan

d

LAN port

e

OPTICAL IN

f

HDMI IN 1/2

g

HDMI OUT

h

VIDEO OUT

i

COMPONENT VIDEO (Y P

b Pr)

OUTPUT (PROGRESSIVE SCAN)

j

Antenna Connector

k

iPod (24 pin)

Connect to the furnished iPod cradle.

l

AUX (L/R) INPUT

HB916-RD0_BDEUPPK_ENG.indd 15 2011-06-02 �� 11:09:14

2 Connecting

Connecting16

Connecting

2

Assemble the speakers

Speaker Setup for BCS-717

Preparing the speakers

1. Attach the non-skid pads to the base of each

speaker stand bases, the subwoofer and the

center speaker.

For speaker stand bases:

Use the supplied adhesive to attach four middle

pads to the base (bottom) of each speaker

stand base.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

For subwoofer:

Use the supplied adhesive to attach four large

pads to the base of subwoofer.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

For center speaker:

Use the supplied adhesive to attach four small

pads to the base of center speaker.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

2. Attach the speaker stand bases to the stems

using the screws provided.

Once you have aligned the stem and base,

secure with the small screws at the points

shown below. Note that the speaker should

face in the direction of the base of the isosceles

triangle.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

HB916-RD0_BDEUPPK_ENG.indd 16 2011-06-02 �� 11:09:15

Connecting 17

Connecting

2

3. Connect the wires to the player.

Connect the white wire with gray line into (+)

side and the other wire into (–) side. To connect

the cable to the player, press each plastic nger

pad to open the connection terminal. Insert the

wire and release the nger pad.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

y

Do not connect any speakers other than

those supplied to this system.

y

Do not connect the supplied speakers to

any amplier other than the one supplied

with this system. Connection to any other

amplier may result in malfunction or re.

y

Please connect the speaker cable of

subwoofer (purple) to orange of the player.

y

These speaker terminals carry HAZARDOUS

LIVE voltage. To prevent the risk of electric

shock when connecting or disconnecting

the speaker cables, disconnect the power

cord before touching any uninsulated parts.

>

Caution

Securing your front and surround

speakers

Secure each of the front and surround speakers

using the plastic catch provided. Screw two

supporting hooks into the wall behind the speaker.

Pass a thick cord around the hooks and through

the plastic catch so that the speaker is stabilized

(make sure to test that it supports the weight of the

speaker). After installing, make sure the speaker is

securely xed.

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

y

The plastic catch is not a mounting xture,

and the speaker should not be hung directly

from the wall using this catch. Always use a

cord when stabilizing the speaker.

y

Pioneer disclaims all responsibility for any

losses or damage resulting from improper

assembly, installation, insucient strength

of the installation materials, misuse, or

natural disasters.

y

When placing this unit, ensure that it is

rmly secured and avoid areas where it may

be likely to fall and cause injury in the event

of a natural disaster (such as an earthquake).

y

Do not stand on the speaker stand base

of the tall speaker to push or swing the

speaker. The speaker may fall and break,

or someone may be injured. Pay special

attention to children.

>

Caution

HB916-RD0_BDEUPPK_ENG.indd 17 2011-06-02 �� 11:09:15

Connecting18

Connecting

2

Speaker Setup for BCS-313

Preparing the speakers

1. Attach the non-skid pads to the base of each

speaker.

For speakers:

Use the supplied adhesive to attach four small

pads to the base (bottom) of each speaker.

For subwoofer:

small non-skid pads

large non-skid pads

small non-skid pads

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

For subwoofer:

Use the supplied adhesive to attach four large

pads to the base of subwoofer.

For subwoofer:

small non-skid pads

large non-skid pads

small non-skid pads

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

For center speaker:

Use the supplied adhesive to attach four small

pads to the base of center speaker.

For subwoofer:

small non-skid pads

large non-skid pads

small non-skid pads

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

2. Connect the wires to the player.

Connect the white wire with gray line into (+)

side and the other wire into (–) side. To connect

the cable to the player, press each plastic nger

pad to open the connection terminal. Insert the

wire and release the nger pad.

For subwoofer:

small non-skid pads

large non-skid pads

small non-skid pads

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

y

Do not connect any speakers other than

those supplied to this system.

y

Do not connect the supplied speakers to

any amplier other than the one supplied

with this system. Connection to any other

amplier may result in malfunction or re.

y

Please connect the speaker cable of

subwoofer (purple) to orange of the player.

y

These speaker terminals carry HAZARDOUS

LIVE voltage. To prevent the risk of electric

shock when connecting or disconnecting

the speaker cables, disconnect the power

cord before touching any uninsulated parts.

>

Caution

HB916-RD0_BDEUPPK_ENG.indd 18 2011-06-02 �� 11:09:15

Connecting 19

Connecting

2

Wall mounting the

center speaker

The center speaker have a mounting hole which

can be used to mount the speaker on the wall.

Before mounting

Remember that the speaker system is heavy and

that its weight could cause the screws to work

loose, or the wall material to fail to support it,

resulting in the speaker falling. Make sure that

the wall you intend to mount the speakers on is

strong enough to support them. Do not mount on

plywood or soft surface walls.

Mounting screws are not supplied. Use screws

suitable for the wall material and support the

weight of the speaker.

y

If you are unsure of the qualities and

strength of the wall, consult a professional

for advice.

y

Pioneer is not responsible for any accidents

or damage that result from improper

installation.

>

Caution

middle non-skid pads

large non-skid pads

Rear

Front

small non-skid pads

thick cord

Plastic catch

5 mm

10 mm

5 mm to 7 mm

Mounting screw

(not supplied)

Additional notes on

speaker

Install the main front left and right speakers at an

equal distance from the TV.

Precautions:

Make sure that all the bare speaker wire is twisted

together and inserted fully into the speaker

terminal. If any of the bare speaker wire touches the

back panel it may cause the power to cut o as a

safety measure.

The front, center and surround speakers supplied

with this system are magnetically shielded.

However, depending on the installation location,

colour distortion may occur if the speaker is

installed extremely close to the screen of a

television set. If this case happens, turn the power

switch of the television set OFF, and turn it ON after

15 min. to 30 min. If the problem persists, place the

speaker system away from the television set.

The subwoofer is not magnetically shielded and

so should not be placed near a TV or monitor.

Magnetic storage media (such as oppy discs and

tape or video cassettes) should also not be kept

close to the subwoofer.

Do not attach the front/surround speakers and

subwoofer to a wall or ceiling. They may fall o and

cause injury.

HB916-RD0_BDEUPPK_ENG.indd 19 2011-06-02 �� 11:09:15

Connecting20

Connecting

2

Positioning the system

The following illustration shows an example of

positioning the system. Note that the illustrations

in these instructions dier from the actual unit for

explanation purposes.

For the best possible surround sound, all the

speakers other than the subwoofer should be

placed at the same distance from the listening

position (

A

B

C

D

E

F

G

).

A

B

C

D

E

F

G

A

B

C

D

E

F

G

Front left speaker (L)/

A

B

C

D

E

F

G

Front right speaker (R):

Place the front speakers to the sides of the monitor

or screen and as ush with the screen surface as

possible.

A

B

C

D

E

F

G

Center speaker:

Place the center speaker above or below the

monitor or screen.

A

B

C

D

E

F

G

Surround left speaker (L)/

A

B

C

D

E

F

G

Surround right speaker (R):

Place these speakers behind your listening position,

facing slightly inwards.

A

B

C

D

E

F

G

Subwoofer:

The position of the subwoofer is not so critical,

because low bass sounds are not highly directional.

But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of

the room to reduce the wall reections.

A

B

C

D

E

F

G

Unit

y

Be careful to make sure children do not

put their hands or any objects into the

*subwoofer duct.

*subwoofer duct: A hole for plentiful bass

sound on subwoofer cabinet (enclosure).

y

Place the center speaker at a safe distance

from the child’s reach.

Otherwise it may result in the speaker falling

down and causing personal injury and/or

property damage.

y

The speakers contain magnetic parts, so

colour irregularity may occur on the TV

screen or PC monitor screen. Please use the

speakers away from the TV screen or PC

monitor screen.

>

Caution

HB916-RD0_BDEUPPK_ENG.indd 20 2011-06-02 �� 11:09:16

La page est en cours de chargement...

Pioneer BCS-313 Le manuel du propriétaire

Ce manuel convient également à

Pioneer BCS-313 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents