Winmate R10IH8M-RTT2GP Manuel utilisateur

Please read this instructions carefully before using this product, and save this manual for future use.

Ultra-Rugged Tablet Computer

Intel ® Core i5-5200U Broadwell 2.2 GHz, up to

2.7 GHz

R10IH8M-RTT2GP, 10.4” Ultra Rugged Tablet PC

User Guide

Version 1.0

i

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described product(s)

conveys no license or title under any patent, copyright, or masks work rights to these

products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer

discovers a defect, we will, at his/her option, repair or replace the defective product at no

charge to the customer, provide it is returned during the warranty period of one year, with

transportation charges prepaid. The returned product must be properly packaged in its

original packaging to obtain warranty service. If the serial number and the product shipping

data differ by over 30 days, the in-warranty service will be made according to the shipping

date. In the serial numbers the third and fourth two digits give the year of manufacture, and

the fifth digit means the month (e. g., with A for October, B for November and C for

December).

For example, the serial number 1W16Axxxxxxxx means October of year 2016.

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

ii

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We

are always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE

A note is used to emphasize helpful information.

IMPORTANT

An important note indicates information that is important for you to know.

CAUTION

A Caution alert indicates potential damage to hardware and explains how to

avoid the potential problem.

WARNING!

An Electrical Shock Warning indicates the potential harm from electrical

hazards and how to avoid the potential problem.

iii

Important Information

Countries/

Area

Symbol

This equipment complies with essential

requirements of:

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

USA

FCC Part 15 Subpart B Regulations Class B

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the

interference at him own expense.

iv

Contents

PREFACE .................................................................................................................................................................................... I

ABOUT THIS USER GUIDE ......................................................................................................................................................... 1

DOCUMENTATION SET ....................................................................................................................................................................... 1

CHAPTER DESCRIPTIONS ..................................................................................................................................................................... 1

CHAPTER 1: READ ME FIRST ..................................................................................................................................................... 2

SAFETY INFORMATION ....................................................................................................................................................................... 2

HANDLING AND MAINTENANCE ........................................................................................................................................................... 5

CHAPTER 2: GETTING STARTED ................................................................................................................................................ 7

INTRODUCTION ................................................................................................................................................................................ 7

PRODUCT FEATURES .......................................................................................................................................................................... 7

UNPACKING ..................................................................................................................................................................................... 8

DESCRIPTION OF PARTS ...................................................................................................................................................................... 9

HOTKEY FOR SPECIFIC FUNCTIONS ..................................................................................................................................................... 11

FIRST-TIME OPERATION ................................................................................................................................................................... 12

Inserting Battery Pack ........................................................................................................................................................... 12

Installing Hot-swappable Battery ......................................................................................................................................... 13

Connecting to Power Supply ................................................................................................................................................. 14

POWERING ON AND OFF .................................................................................................................................................................. 14

Powering On.......................................................................................................................................................................... 15

Powering Off ......................................................................................................................................................................... 15

CHAPTER 3: FIRST TIME OPERATION ...................................................................................................................................... 16

SETTING UP WINDOWS EMBEDDED 8.1 INDUSTRY PRO ......................................................................................................................... 16

SETTING UP WINDOWS 10 IOT ENTERPRISE ......................................................................................................................................... 21

CHAPTER 4: QUICK ACCESS WITH HOTTAB ............................................................................................................................. 23

HOTTAB INTRODUCTION .................................................................................................................................................................. 23

SHORTCUTS ................................................................................................................................................................................... 24

CAMERA ....................................................................................................................................................................................... 25

Using Camera Features ......................................................................................................................................................... 25

DEVICE ON/OFF ........................................................................................................................................................................... 27

USING THE WIRELESS LAN (WI-FI) .................................................................................................................................................... 28

USING THE WIRELESS WAN (3G/LTE) .............................................................................................................................................. 29

Insert SIM card (For optional 3G/LTE equipped device) ........................................................................................................ 29

Use Wireless WAN Feature ................................................................................................................................................... 30

USING THE GPS ............................................................................................................................................................................. 30

USING THE BLUETOOTH ................................................................................................................................................................... 31

SETTINGS ...................................................................................................................................................................................... 32

PC Information ...................................................................................................................................................................... 32

Battery Information .............................................................................................................................................................. 32

Using the Physical Function Keys (Hotkeys) .......................................................................................................................... 32

CHAPTER 5: FREQUENTLY USED SETTINGS ............................................................................................................................. 34

SCREEN RESOLUTION SCALING AND SETTING ........................................................................................................................................ 34

Changing Display Scaling Setting (Recommended) ............................................................................................................... 35

USING RECOVERY WIZARD TO RESTORE COMPUTER .............................................................................................................................. 36

CHAPTER 6: TROUBLESHOOTING............................................................................................................................................ 38

v

BASIC TROUBLESHOOTING ................................................................................................................................................................ 38

APPENDIX A: SPECIFICATIONS ................................................................................................................................................ 40

APPENDIX B: DIMENSIONS AND SCHEMATICS........................................................................................................................ 42

APPENDIX E: SOFTWARE DEVELOPMENT KIT (SDK) ................................................................................................................ 43

Chapter 1 Read Me First

1

About This User Guide

This User Guide provides information about using the Winmate® R10IH8M-RTT2GP and

accessories.

NOTE

Some pictures in this guide are samples and can differ from actual product.

Documentation Set

The documentation set for the R10IH8M-RTT2GP series provides information for specific user

needs, and includes:

 Ultra Rugged Tablet PC Series Quick Start Guide - describes how to get the

R10IH8M-RTT2GP up and running.

 Ultra Rugged Tablet PC Series User Guide – contains detailed description on how to

R10IH8M-RTT2GP, its components and features.

Chapter Descriptions

Chapter 1, Read Me First provides important safety information for you to know prior using

R10IH8M-RTT2GP

Chapter 2, Getting Started provides basic instructions on how to use R10IH8M-RTT2GP,

including main SIM card, SD card and battery installation, powering on and resetting R10IH8M-

RTT2GP

Chapter 3, First Time Operation provides instructions on how to set up Windows OS for the

first time.

Chapter 4, Quick Access by HotTab provides basic instructions on using the R10IH8M-

RTT2GP

Chapter 5, Frequently Used Settings explains how to change R10IH8M-RTT2GP display

resolution, replace hot-swap battery and restore the computer.

Chapter 6, Troubleshooting provides basic troubleshooting information on R10IH8M-RTT2GP

R10IH8M-RTT2GP User Guide

2

Chapter 1: Read Me First

Safety Information

Follow and adhere to all warnings and

instructions in this manual. For your safety,

please read all safety and operating

instructions before using the product. Keep

this manual for future reference.

Precaution on

Battery Pack

Précaution avec le

bloc-pile

Do Not Expose the Battery Pack to

Excessive Heat, or Extreme Heat (Near

Fire, in Direct Sunlight for example).

Generation of heat, ignition or rupture

may result

Ne pas exposer le bloc-pile à une

Chaleur Excessive, ou une Chaleur

Extrême (Près d'un feu, sous la lumière

du soleil par exemple) Une production de

chaleur, l'amorçage ou la rupture peuvent

être occasionnés

Do Not Disassemble, Modify, or Insert

Sharp Objects Into the Battery Pack.

Electrolyte leakage, generation of heat,

ignition or rupture may result.

Ne pas démonter, modifier, ou insérer

des objets pointus à l'intérieur du bloc-

pile. Une fuite d'électrolyte, la génération

de chaleur, l'amorçage ou la rupture

peuvent être occasionnés.

Do Not Short the Positive (+) and

Negative (-) Terminals of the Battery.

Generation of heat, ignition or rupture

may result. When carrying or storing the

device, do not place the battery pack

together with articles that may contact

electricity.

Ne pas court-circuiter les bornes Positive

(+) et Négative (-) de la pile, la génération

de chaleur, l'amorçage ou la rupture

peuvent être occasionnés. Lors du

transport et du rangement de l'appareil,

ne pas placer le bloc-pile en même temps

que des articles pouvant créer un contact

électrique.

Do Not Apply Shocks to the Battery by

Dropping It or Applying Strong Pressure

to It. Electrolyte leakage, generation of

heat, ignition or rupture of battery may

occur.

Ne pas faire subir de choc à la pile en la

laissant tomber ou en appliquant une

forte pression dessus. Une fuite

d'électrolyte, la génération de chaleur,

l'amorçage ou la rupture peuvent être

occasionnés.

Do Not Charge the Battery Other Than

Methods Those Specified In This Manual.

If the battery is not charged using one of

the specified methods, electrolyte

leakage, generation of heat, ignition or

rupture may result.

Ne pas charger la pile par d'autres

méthodes que celles spécifiées dans ce

manuel. Si la pile n'est pas chargée en

utilisant l'une des méthodes spécifiées,

une fuite d'électrolyte, la génération de

chaleur, l'amorçage ou la rupture peuvent

être occasionnés.

Chapter 1 Read Me First

3

When the Battery Pack Has Deteriorated,

Replace It with a New Battery. Continued

use of a damaged battery pack may

result in heat generation, ignition or

battery rupture.

Lorsque la pile est détériorée, la

remplacer par une nouvelle pile.

L'utilisation continue d'une pile

endommagée peut occasionner une

génération de chaleur, l'amorçage ou la

rupture de la pile.

Do Not Use the Battery Pack With Any

Other Products. The battery pack is

rechargeable and is only designed for this

specific product. If it is used with a

product other than the specified product,

electrolyte leakage, generation of heat,

ignition or rupture may result.

Ne pas utiliser avec un autre produit La

batterie est rechargeable et a été

conçue pour un produit spécifique. Si

elle est utilisée sur un produit différent

de celui pour lequel elle a été conçue,

des pertes d’électrolytes et une

production

de chaleur sont possibles, elle

risque également de prendre feu ou de

casser.

Do Not Use This Product With Battery

Other Than the One Specified.

Ne pas utiliser ce produit avec une

batterie autre que celle spécifiée

General Product

Safety

Sécurité générale

des produits

This product should not be used near

water such as bathtubs, sinks,

swimming pools, wet basement, etc.

Ce produit ne dois pas être utilisé près

de l'eau comme les baignoires, les

éviers, les piscines, les sous-sols

humides, etc.

Do not block any ventilation openings.

Do not place the product against a wall

or in an enclosed space as doing so

might impede the flow of cooling air.

Ne pas bloquer les ouvertures de

ventilation. Ne pas placer le produit

contre un mur ou dans un espace clos

de façon à entraver la circulation de l'air

de refroidissement.

Do not place the product near any heat

sources such as radiators, warm air

intakes, stoves or other heat-generating

devices (including amplifiers or other

heat producing equipment).

Ne pas placer le produit près d'une

source de chaleur comme des

radiateurs, les arrivées d'air chaud,

poêles ou autres produits générant de

la chaleur (y compris les amplificateurs

ou autre équipement produisant de la

chaleur.)

R10IH8M-RTT2GP User Guide

4

Do not disregard the safety that a

polarized or grounded connection can

provide. A polarized connection consists

of two plugs, one of which is larger than

the other. A grounded connection has

two blades and a third one that is

grounded. If the main plug provided

cannot be inserted into your outlet,

consult an electrician to replace your

obsolete outlet.

Ne pas ignorer la sécurité qu'une prise

polarisée ou une prise de terre peut

prévoir. Une prise polarisée se

compose de deux fiches, dont l'une est

plus large que l'autre. Une prise de terre

possède deux lames et une troisième

qui est la terre. Si la fiche principale

fournie ne peut être insérée dans votre

prise, consultez un électricien pour

remplacer votre prise obsolète.

Protect the power cord from being

crushed or pinched, particularly in the

area of the plugs, any receptacles used,

and the point of exit from the apparatus.

Do not break off the ground pin of the

power cord.

Empêcher le cordon d'alimentation

d'être écrasé ou pincé, en particulier

dans les zones de prises, des

containers utilisés, et du point de sortie

de l'appareil. Ne pas casser la broche

de terre du cordon d'alimentation.

Use only accessories specified by the

manufacturer.

Utiliser uniquement les accessoires

spécifiés par le fabricant.

Use only with its transport carriage,

stand, tripod, console or table specified

by the manufacturer or sold with the

product. When using a carriage, move

the carriage assembly with the product

carefully to avoid damage from falling

over.

Utiliser uniquement avec son chariot de

transport, support, trépied, console ou

table spécifiés par le fabricant ou vendu

avec le produit. Lors de l'utilisation d'un

charriot, déplacez l'ensemble chariot

avec le produit avec soin pour éviter

tout dommage de chute.

Unplug this apparatus during lightning

storms or when it is not being used for

long periods.

Débrancher cet appareil durant les

orages ou lorsqu'il n'est pas utilisé

pendant de longues périodes.

Refer all servicing to qualified service

personnel. A technical intervention is

required when the apparatus has been

damaged in any way, for example if the

power cord or plug is damaged, liquid

has been spilled or objects have fallen

inside the unit, if the product has been

exposed to rain or moisture, if it does

not operate normally or if it has been

dropped.

Confier toute réparation à du personnel

qualifié. Une intervention technique est

nécessaire lorsque l'appareil a été

endommagé de quelque façon, par

exemple si le cordon d'alimentation ou

la fiche est endommagé, du liquide a

été renversé ou des objets sont tombés

à l'intérieur de l'unité, si le produit a été

exposé à la pluie ou à l'humidité, s'il ne

fonctionne pas normalement ou s'il a

été jeté.

Chapter 1 Read Me First

5

Handling and Maintenance

Follow and adhere to all warnings and

instructions in this manual. For the longevity

of the product usage, please read all

operating instructions before using the

product. Keep this manual for future

reference.

General Guideline

Guide Général

Keep the product at least 13 cm (5

inches) away from electrical appliances

that can generate a strong magnetic field

such as TV, refrigerator, motor, or a large

audio speaker.

Garder le produit au moins à 13 cm (5

pouces) de distance des appareils

électriques qui peuvent générer un fort

champ magnétique comme une

télévision, un réfrigérateur, un moteur, ou

un important haut-parleur.

Do not place heavy objects on top of the

tablet computer as this may damage the

display.

Ne pas placer d'objets lourds sur le

dessus de l'ordinateur tablette cela peut

endommager l'écran.

The screen surface can be easily

scratched. Use with care. Do not use

paper towels to clean the display but use

the included cleaning cloth. Avoid

touching it with a pen or pencil.

La surface de l'écran peut être facilement

rayée. Utiliser avec précaution. Ne pas

utiliser de serviette en papier pour

nettoyer l'écran mais utiliser le chiffon de

nettoyage inclus. Éviter de toucher avec

un stylo ou un crayon.

To maximize the life of the backlight in

the display, allow backlight to

automatically turn off as a result of power

management. Avoid using a screen saver

or other software that prevents the power

management from working.

Pour maximiser la durée de vie du

rétroéclairage de l'écran, autoriser le

rétroéclairage résultant de la gestion de

l'alimentation. Éviter d'utiliser un

économiseur d'écran ou un autre logiciel

empêchant la gestion de l'alimentation de

fonctionner.

Cleaning Guideline

Guide de

nettoyage

Use a soft cloth moistened with water or a

non-alkaline detergent to wipe the

exterior of the product.

Utiliser un chiffon doux humidifié avec de

l’eau ou un détergeant non alcalin pour

essuyer l'extérieur du produit.

Gently wipe the display with a soft, lint-

free cloth. Do not use alcohol or

detergent on the product.

Essuyer délicatement l'écran avec un

chiffon doux non pelucheux. Ne pas

utiliser d'alcool ou un détergent sur le

produit.

R10IH8M-RTT2GP User Guide

6

Touchscreen

Guideline

Guide de l'écran

tactile

Use your finger or the stylus on the display.

Using sharp or metallic object may cause

scratches and damage the display, thereby

causing errors.

Utiliser votre doigt ou le stylet sur l'écran.

L'utilisation d'un objet pointu ou métallique

peut provoquer des rayures.

Use a soft cloth to remove dirt on the

display. The touchscreen surface has a

special protective coating that prevents dirt

from sticking to it. Not using a soft cloth

may cause damage to the special

protective coating on the touchscreen

surface. To clean off hard to remove dirt,

blow some steam on the particular area

and gently wipe away using a soft cloth.

Utiliser un chiffon doux pour enlever la

poussière sur l'écran. La surface de l'écran

tactile a un revêtement protecteur spécial

empêchant la saleté de se coller à lui. Ne

pas utiliser un chiffon doux peut

endommager le revêtement spécial sur la

surface de l'écran tactile. Pour nettoyer les

saletés plus difficiles à enlever, souffler de

la buée sur la zone particulière et essuyer

doucement avec un chiffon doux.

Do not use excessive force on the display.

Avoid placing objects on top of the display

as this may cause the glass to break.

Ne pas utiliser une force excessive sur

l'écran. Éviter de placer des objets au

dessus de l’écran cela pourrait provoquer

une cassure du verre.

When there is a noticeable discrepancy in

the operation of the touchscreen function

(your touch does not correlate to the

proper location on the screen), recalibrate

the touchscreen display.

Lorsqu'il y a un écart sensible dans le

fonctionnement de l'écran tactile (votre

contact ne correspond pas à la bonne

position sur l'écran), recalibrer l'écran

tactile.

Chapter 2 Getting Started

7

Chapter 2: Getting Started

This chapter tells you information about Winmate® R10IH8M-RTT2GP Series Rugged Tablet

Computer, its highlighted features, and provides basic instructions for using the R10IH8M-

RTT2GP, including powering on and resetting the R10IH8M-RTT2GP.

 Introduction

 Product Features

 Unpacking

 Accessories

 Description of Parts

 Hot Key for Specific Functions

 First Time Operations

 Powering On and Off

Introduction

Thank you for purchasing Winmate® R10IH8M-RTT2GP Rugged Tablet Computer. Winmate®

R10IH8M-RTT2GP Rugged Tablet PC is powered by a Haswell 1.6 GHz Intel Core i5-5200U

processor that was designed for high performance computing and uses the Intel HD 4400

Graphics chipset. The R10IH8M-RTT2GP comes with a 10.4” high-quality XGA (1024 x 768)

screen, this 4-wire resistive touch screen may be operated with ease by either a plastic stylus

of fingertip

The R10IH8M-RTT2GP packs WLAN, Bluetooth, GPS, and WWAN function─all into a single

device. Besides Winmate® R10IH8M-RTT2GP offers the highly reliable mobility and

embedded hardware for data collection. Broad range of configuration options- Barcode Reader,

makes R10IH8M-RTT2GP highly customizable and most versatile mobile solution for mission-

critical mobile professionals.

Product Features

Winmate® R10IH8M-RTT2GP Rugged Tablet PC features:

 Intel Core i5-5200U Haswell 1.6 GHz (turbo max 2.6 GHz)

 Intel HD Graphics 4400

 2 x SODIMM, Max 16GB DDR3L-1600 (default 4GB)

 Visible light transflection touch enhanced visibility

 Optional front (2MP) and rear (5MP) camera

 Alu-Mg alloy housing for MIL-810G, vibration, salt fog test

 Built in wireless/Bluetooth/GPS

 Support 3G Module (optional)

R10IH8M-RTT2GP User Guide

8

Unpacking

If any of the following items are missing or damaged, contact us.

Standard packing list includes:

 Tablet Computer

 Standard Battery

 Power Adapter

 Power Cord and Plugs

 Driver CD

 User Manual

 Stylus Pen (located on the rear side)

Chapter 2 Getting Started

9

Description of Parts

Front:

Right:

Left:

No

Item

Description

1

Resistive

Touch Screen

Display acts as one of

the inputs for the Tablet

Computer

2

Speaker

2 x 1 Watt Speaker

3

Menu

Menu function to show

brightness, volume,

battery status and WiFi

/ Bluetooth on/off

4

Up

Down

Push up key to increase

brightness or volume

under Menu Function

Push down key to

decrease brightness or

volume under Menu

Function

5

Hot Key

6 programmable hot-

key (short and long

press) for user to define

by application. Default

(F1 short press) will

turn on HotTab AP

utility

6

Optional Front

Camera

5MP Autofocus

Camera. Captures

photos and videos.

7

LED indicator

Show the current status

of the Tablet Computer

No

Item

Description

Power Mode

Battery Status

Storage Status

WiFi Status

Light Sensor

8

Power

Power On/Off the unit

9

2 x USB 3.0

High speed USB port

connects to USB

devices, such as USB

flash drive, mouse,

keyboard, printer, etc

10

SD Card slot

Slot to insert SD Card

11

SIM Card slot

Slot to insert SIM Card

12

RS232/422/

485

RS232 COM Port

interface for serial

communication

13

Reset button

Hardware reset Button

14

Power Jack

DC-in power input jack

15

LAN port

Gigabit Ethernet RJ45

Connector for LAN

connection

R10IH8M-RTT2GP User Guide

10

Rear:

Bottom:

Top:

No

Item

Description

16

Stylus

Stylus pen to optimize

the touch performance

17

Adjustable

Kickstand

This adjustable

kickstand allows user

to adjust their viewing

angle.

18

Battery

11.1V, 5200 mAh

Lithium-Ion Battery

(6cells)

No

Item

Description

19

Docking

Connector

Port to docking

solutions such as

vehicle docking to

provide power and

external antenna

Also the hot

swappable battery

Chapter 2 Getting Started

11

HotKey for Specific Functions

For the physical buttons on the R10IH8M-RTT2GP Tablet Computer, in addition to their

dedicated functions detailed in the previous section, they can also be used to emulate commonly

used keyboard key strokes. Under different scenario, a single physical button or a combination of

physical buttons provide different keyboard key strokes, which are specified below:

Under POST (before windows boot up):

Buttons

Keystroke

F1

Recovery Menu

Under Windows:

Buttons

Keystroke

Menu

Menu function to show

brightness, volume, battery

status and WiFi / Bluetooth

on/off

F1

Open the HotTab

LED Indicators:

Item

Description

Power Indicator

Green – Tablet is ON

No light – Tablet is OFF

Battery Status

Orange – AC adapter is plugged in and charging

Blinking Red – Battery is Low and need to be charge

Disk Activity

Indicator

Green - Disk Activity

No light - Disk Idling

RF Communication

Green – Wi-Fi/BT/WWAN/GPS ON

No light – Wi-Fi/BT/WWAN/GPS are all OFF

Light Sensor

Auto adjust screen backlight

R10IH8M-RTT2GP User Guide

12

First-time Operation

To start using the R10IH8M-RTT2GP for the first time:

 Install the Battery Pack

 Installing Hot-swappable Battery

 Charge the R10IH8M-RTT2GP

 Power on the R10IH8M-RTT2GP

 Configure the R10IH8M-RTT2GP

Inserting Battery Pack

To insert the standard battery pack into the Tablet Computer:

1. Disconnect AC adapter and power cord from the Tablet Computer.

2. Turn the Tablet Computer over, back facing up.

3. Insert the battery on the connector-pins side first, and then lower the battery into the

battery compartment. Screw tightly on the battery to make it fully inserted.

4. Make sure the battery is completely inserted, battery will be flat against the housing once

fully inserted.

Place the tablet (back facing up) and insert the Battery into the battery slot.

Removing the Battery Pack

1. Power off the Tablet Computer (or turn on sleep mode). Disconnect any cords connected

to the computer.

2. Turn the Tablet Computer over, back facing up.

3. Locate the Battery and unscrew it to the “Unlocked” position.

4. Lift the battery out.

Chapter 2 Getting Started

13

Installing Hot-swappable Battery

This Hot-swappable battery carries 2600mAh back-up battery that can support half of the main

battery operating hours. To installed the hot-swappable battery perform this following steps:

1. Plug the hot-swappable battery while the main battery in low power mode

2. Align the docking connecter of the tablet with the battery

3. Use the thumb-screws to secure the hot-swappable battery and the tablet

4. Push Menu button to show the main and external or Back Up battery status to make sure

that the hot-swappable battery already installed properly

La page charge ...

Winmate R10IH8M-RTT2GP Manuel utilisateur

Ce manuel convient également à

Winmate R10IH8M-RTT2GP Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents