Panasonic PVDC352 Mode d'emploi

R

Spanish Quick Use Guide is included.

Guía para rápida consulta en español está incluida.

LSQT0561A

For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

Digital Video Camcorder

Operating Instructions

Models No. PV-DC352

PV-DC352-K

Before attempting to connect, operate or adjust this product, please read these instructions thoroughly.

Mini

MJ147-P.book 1 ページ２００２年４月２４日　水曜日　午後１時５６分

2

This symbol warns the user that uninsulated

voltage within the unit may have sufficient

magnitude to cause electric shock.

Therefore, it is dangerous to make any kind

of contact with any inside part of this unit.

This symbol alerts the user that important

literature concerning the operation and

maintenance of this unit has been included.

Therefore, it should be read carefully in order

to avoid any problems.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

Things You Should Know

Thank you for choosing Panasonic!

You have purchased one of the most sophisticated and

reliable products on the market today. Used properly, we’re

sure it will bring you and your family years of enjoyment.

Please take time to fill in the information on the right.

The serial number is on the tag located on the underside of

your Palmcorder. Be sure to retain this manual as your

convenient Palmcorder information source.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Safety Precautions

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

Your

Palmcorder is designed to record and play back in Standard Play (SP) mode and Long Play (LP) mode.

It is recommended that only cassette tapes that have been tested and inspected for use in Palmcorder with the

mark be used.

The above markings are located on the appliance bottom cover.

Note: This equipment has been tested and found to comply with Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when operated in a residential environment.

If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off

and on, use the equipment in another location and/or utilize an electrical outlet different from that used by the receiver.

If necessary, consult the dealer or an experienced radio/TV technician for help. You may find the booklet, ‘Something About

Interference’ available from FCC local regional offices helpful.

FCC Warning:

≥To assure continued FCC compliance, the user must use only the provided shielded interfacing cable with ferrite core when

connecting the digital Palmcorder to computer in accordance with instruction herein. Also, any unauthorized changes or

modifications to this equipment could void the user’s authority to operate.

Declaration of Conformity

Model No.: PV-DC352

Trade Name: Panasonic

Responsible party: Matsushita Electric Corporation of America

Address: One Panasonic Way, Secaucus, New Jersey 07094

Telephone number: 1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

CAUTION: TO PREVENT FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED

ACCESSORIES ONLY.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR

EQUIVALENT TYPE.

≥Since this product gets hot during use, operate it in well ventilated place; do not install this equipment in a confined space such

as a bookcase or similar unit.

Ò

MJ147-P.book 2 ページ２００２年４月２４日　水曜日　午後１時５６分

3

Important Safeguards

1) Read Instructions— All the safety and operating

instructions should be read before the unit is operated.

2) Retain Instructions— The safety and operating

instructions should be retained for future reference.

3) Heed Warnings— All warnings on the unit and in the

operating instructions should be adhered to.

4) Follow Instructions— All operating and maintenance

instructions should be followed.

5) Cleaning— Unplug this video unit from the wall outlet

before cleaning. Do not use liquid or aerosol cleaners.

Use a dry cloth for cleaning.

6) Attachments— Do not use attachments not

recommended by the video product manufacturer as

they may be hazardous.

7) Water and Moisture— Do not use this video unit near

water- for example near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a

swimming pool, and the like.

8) Accessories— Do not place this video unit on an

unstable cart, stand, tripod, bracket, or table. The video

unit may fall, causing serious injury to a child or adult,

and serious damage to the unit. Use only with a cart,

stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the video unit. Any mounting

of the unit should follow the manufacturer’s instructions

and should use a mounting accessory recommended by

the manufacturer. An appliance

and cart combination should be

moved with care. Quick stops,

excessive force, and uneven

surfaces may cause the

appliance and cart combination

to overturn.

9) Ventilation— Slots and

openings in the cabinet are

provided for ventilation and to ensure reliable operation

of the video unit and to protect it from overheating.

These openings must not be blocked or covered. Never

place the video unit on a bed, sofa, rug, or other similar

surface, or near or over a radiator or heat register. This

video unit should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been

adhered to.

10) Power Sources— This video unit should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For video units intended to be operated from

battery power, or other sources, refer to the operating

instructions.

11) Grounding or Polarization— This video unit may be

equipped with either a polarized 2-wire AC (Alternating

Current) line plug (a plug having one blade wider than

the other) or 3-wire grounding type plug, a plug having a

third (grounding) pin.

The 2-wire polarized plug will fit into the power outlet

only one way. This is a safety feature. If you are unable

to insert the plug fully into the outlet, try reversing the

plug. If the plug still fails to fit, contact your electrician to

replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

The 3-wire grounding type plug will fit into a grounding

type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the grounding type plug.

12) Power-Cord Protection— Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords of plugs, convenience

receptacles, and the point where they exit from the unit.

13) Outdoor Antenna Grounding— If an outside antenna or

cable system is connected to the video unit, be sure the

antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up

static charges. Part 1 of the Canadian Electrical Code, in

USA Section 810 of the National Electrical Code,

provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-

in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit,

connection to grounding electrodes, and requirements

for the grounding electrode.

14) Lightning— For added protection of this video unit

receiver during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug

it from the wall outlet and disconnect the antenna or

cable system. This will prevent damage to the video unit

due to lightning and power-line surges.

15) Power Lines— An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with

them might be fatal.

16) Overloading— Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810 - 20)

GROUNDING CONDUCTORS

(NEC SECTION 810 - 21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PARTH)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

S3125A

MJ147-P.book 3 ページ２００２年４月２４日　水曜日　午後１時５６分

4

Important Safeguards

17) Objects and Liquids — Never push objects of any kind

into this video unit through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any

kind onto the video unit.

18) Servicing — Do not attempt to service this video unit

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

19) Damage Requiring Service — Unplug this video unit

from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If any liquid has been spilled into, or objects have

fallen onto, the video unit.

c. If the video unit has been exposed to rain or water.

d. If the video unit does not operate normally by following

the operating instructions. Adjust only those controls

that are covered by the operating instructions, as an

improper adjustment of other controls may result in

damage and will often require extensive work by a

qualified technician to restore the video unit to its

normal operation.

e. If the video unit has been dropped or the cabinet has

been damaged.

f. When the video unit exhibits a distinct change in

performance — this indicates a need for service.

20) Replacement Parts — When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or have

the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric

shock or other hazards.

21) Safety Check— Upon completion of any service or

repairs to this video unit, ask the service technician to

perform safety checks to determine that the video unit is

in safe operating order.

Precautions

USE & LOCATION

≥TO AVOID SHOCK HAZARD ... Your Palmcorder and

power supply should not be exposed to rain or moisture.

Do not connect the power supply or operate your

Palmcorder if it gets wet. Your Palmcorder has been

designed for outdoor use, however it is not designed to

sustain direct exposure to water, rain, sleet, snow, sand,

dust, or a direct splashing from a pool or even a cup of

coffee. This action could permanently damage the internal

parts of your Palmcorder. Do not attempt to disassemble

this unit. There are no user serviceable parts inside.

Unplug your Palmcorder from the power supply before

cleaning.

≥DO NOT AIM YOUR PALMCORDER AT THE SUN OR

OTHER BRIGHT OBJECTS

≥DO NOT LEAVE THE PALMCORDER WITH THE EVF

AIMED DIRECTLY AT THE SUN AS THIS MAY CAUSE

DAMAGE TO THE INTERNAL PARTS OF THE EVF

≥DO NOT EXPOSE YOUR PALMCORDER TO

EXTENDED HIGH TEMPERATURE ... Such as, in direct

sunlight, inside a closed car, next to a heater, etc... This

action could permanently damage the internal parts of your

Palmcorder.

≥AVOID SUDDEN CHANGES IN TEMPERATURE ... If the

unit is suddenly moved from a cold place to a warm place,

moisture may form on the tape and inside the unit.

≥DO NOT LEAVE YOUR PALMCORDER OR THE POWER

SUPPLY TURNED ON WHEN NOT IN USE.

≥STORAGE OF YOUR PALMCORDER ... Store and handle

your Palmcorder in a manner that will not subject it to

unnecessary movement (avoid shaking and striking). Your

Palmcorder contains a sensitive pick-up device which

could be damaged by improper handling or storage.

CARE

≥TO CLEAN YOUR PALMCORDER ... Do not use strong or

abrasive detergents when cleaning your Palmcorder body.

≥TO PROTECT THE LENS ... Do not touch the surface of

the lens with your hand. Use a commercial Palmcorder

lens solution and lens paper when cleaning the lens.

Improper cleaning can scratch the lens coating.

≥TO PROTECT THE FINISH OF YOUR PALMCORDER ...

Before handling your Palmcorder, make sure your hands

and face are free from any chemical products, such as

suntan lotion, as it may damage the finish.

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

This Product has fluorescent lamps that contain a small amount of mercury. It also contains lead in some components.

Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or

recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org

.>

This class B digital apparatus complies with CANADIAN ICES-003.

MJ147-P.book 4 ページ２００２年４月２４日　水曜日　午後１時５６分

5

Contents

Before Using

Standard Accessories ......................................................... 6

Quick Guide......................................................................... 7

To View the Playback Picture.............................................. 7

Controls and Components................................................... 8

Remote Controller ............................................................. 10

Power Supply .................................................................... 12

Charging Time and Available Recording Time.................. 12

Lens Cap and Grip Belt ..................................................... 13

Attaching the Shoulder Strap ............................................ 14

Inserting a Cassette .......................................................... 14

Turning on/off the Palmcorder and Selecting Modes ........ 15

Using the Viewfinder ......................................................... 15

Using the LCD Monitor ...................................................... 15

Using the Menu Screen..................................................... 16

List of Menus..................................................................... 17

Setting Date and Time....................................................... 20

Internal Lithium Battery Recharge..................................... 20

LP Mode ............................................................................ 20

Audio Recording Mode...................................................... 20

CAMERA Mode

Recording .......................................................................... 21

PhotoShot Recording on the DV Cassette ........................ 22

Zoom In/Out Functions...................................................... 22

Digital Zoom Function ....................................................... 23

Digital Electronic Image Stabilizer Function...................... 23

Fade In/Out Functions....................................................... 23

Cinema Function ............................................................... 24

Backlight Compensation Function..................................... 24

MagicPix Function............................................................. 24

Quick Start......................................................................... 25

Wind Noise Reduction Function ........................................ 25

Recording in Special Situations (Program AE).................. 25

Manual Shutter Speed Adjustment.................................... 26

Manual Iris Adjustment (F Number) .................................. 26

Manual Focus Adjustment................................................. 26

Recording in Natural Colors (White Balance).................... 27

Adjusting White Balance Manually.................................... 27

Using the Free Angle Flash............................................... 28

Digital Effect Functions...................................................... 29

VCR Mode

Playing Back...................................................................... 31

Finding a Scene You Want to Play Back........................... 31

Slow Motion Playback ....................................................... 32

Still Playback/Still Advance Playback................................ 32

Finding the End of a Recording

(Blank Search Function) ................................................ 32

Index Search Functions..................................................... 33

Playback Zoom Function................................................... 34

Playback Digital Effect Functions ...................................... 34

Playing Back on Your TV .................................................. 36

Audio Dubbing................................................................... 36

Special Features

Using a Memory Card........................................................37

Recording on the Memory Card.........................................37

Playing Back Files from the Memory Card ........................40

Copying Pictures from a Memory Card to a Cassette .......41

Slide Show.........................................................................42

Creating a Title ..................................................................43

Inserting a Title ..................................................................43

Protecting the Files on a Memory Card from Accidental

Erasure (File Lock).........................................................44

Deleting the Files recorded on a Memory Card ................. 44

Formatting a Memory Card................................................45

DPOF Setting..................................................................... 45

Copying your DV Cassette to an S-VHS or

VHS Cassette (Dubbing)................................................ 46

Copying an S-VHS or VHS Cassette to

your DV Cassette...........................................................46

Using your Palmcorder with Digital Video Equipment

(Dubbing) .......................................................................47

Using the Software with a Computer .................................48

ArcSoft Software................................................................49

Using the Supplied USB Connection Kit............................50

Installing USB Driver..........................................................50

Connecting Computer and Palmcorder ............................. 50

Using the G726 Decoder ................................................... 51

Installing the G726 Decoder .............................................. 51

Check if Palmcorder is correctly recognized...................... 52

To disconnect USB cable safely ........................................52

Verifying and updating driver .............................................53

If you no longer need software or driver (uninstall)............56

Notes .................................................................................57

Others

Indications..........................................................................58

Warning/Alarm Indications.................................................60

Notes & Precautions ..........................................................61

Cautions for Use ................................................................67

Explanation of Terms.........................................................70

Specifications.....................................................................71

Palmcorder Accessory System..........................................72

Palmcorder Accessory Order Form

(For USA Customers) ....................................................73

Before Requesting Service (Problems and Solutions)....... 74

Request for Service Notice ................................................ 76

Limited Warrant (For USA Customers)..............................77

Customer Services Directory .............................................78

Warranty (For Canadian Customers).................................79

Index ..................................................................................80

Spanish Quick Use Guide/

Guía española para el uso rápido.................................. 81

MJ147-P.book 5 ページ２００２年４月２４日　水曜日　午後１時５６分

6

K2KC4CB00002

CR2025

PV-DAC11 (For USA)

PV-DAC11-K (For Canada)

RP-SD016BVE0

VFC3506

N2QAEC000003 N2QCAD000001

VYP8616

1)

2)

3)

7)

5) 6)

4)

8)

9)

10) 11)

CGR-D14

LSFT0489 VFA0366

VFC3861

Before Using

Standard Accessories

Illustrated on the left are accessories packaged with the Palmcorder.

1) AC Adaptor, DC Cable and AC Cable (l 12)

≥Supplies power to the Palmcorder.

CAUTION:

This unit will operate on 110/120/220/240 V AC. An AC plug adaptor

may be required for voltages other than 120 V AC. Please contact

either a local or foreign electrical parts distributor for assistance in

selecting an alternate AC plug. We recommend using the accessory

power plug adaptor (VJSS0070) in an area which has special AC

outlets.

2) Battery Pack (l 12)

≥Supplies power to the Palmcorder.

3) Remote Controller and Button-Type Battery (l 10, 11)

4) Tethered Remote Control

5) Lens Cap and Lens Cap String (l 13)

6) Lens Hood for Card Mode Recording (l 37, 64, 69)

≥By attaching supplied Lens Hood in Card Mode you can block direct

sunlight when recording images. However, the Lens Cap cannot be

attached when the lens hood is being used.

7) A/V Cable (l 36)

8) Shoulder Strap (l 14)

9) SD Memory Card (l 57)

10) CD-ROM:

USB Driver for Panasonic DVC (l 50)

G726 Decoder (l 51)

ArcSoft Software (l 48, 49)

Microsoft

®

and Windows

®

are registered trademarks of Microsoft in the

United States and other countries.

≥Macintosh is a registered trademark of Apple Computer, Inc. 2001. ArcSoft,

the ArcSoft logo, ArcSoft PhotoImpression 3.0, ArcSoft PhotoBase 3.0,

ArcSoft PanoramaMaker 3.0 and ArcSoft PhotoPrinter 2000 Pro are

trademarks of ArcSoft, Inc.

≥All product/brand names are trademarks or registered trademarks of the

respective holders.

≥Intel

®

Pentium

®

is a registered trademark.

≥i.LINK and “¥” are trademarks.

≥IBM is a registered trademark of IBM Company.

≥MultiMediaCard is a trademark.

≥SD is a trademark.

11) USB Cable (l 50)

MJ147-P.book 6 ページ２００２年４月２４日　水曜日　午後１時５６分

7

1

2

3

4

5, 6

CAMERA

VCR

CARD

P.B.

5

9

CLOSE

PUSH

2

1

OPEN/

EJECT

CAMERA

VCR

CARD

P.B.

O

F

O

N

M

O

D

E

4

3

O

F

O

N

M

O

D

E

8

SEARCH

MAGICPIX

BACKLIGHT

FADE

CAMERA STILL

MULTI/

P-IN-P

TITLE

TELE JUMP

67

Quick Guide

1

Charge the Battery.

(l 12)

≥Connect the AC Cable to the AC Adaptor and plug it into the AC Wall

Outlet.

≥Attach the Battery to the AC Adaptor. (This will start the charging

process.)

≥The [POWER] Lamp and [CHARGE] Lamp light up, and charging starts.

≥When the [CHARGE] Lamp goes off, charging is completed.

≥Since the Battery will not be charged when the DC Cable is connected

to the AC Adaptor, disconnect it.

2

Attach the Charged Battery to the Palmcorder.

(l 12)

3

Insert the Cassette.

(l 14)

≥Slide the [OPEN/EJECT]

1

Lever toward the front and pull down to

open the Cassette Compartment.

≥Insert the Cassette.

≥Press the [PUSH CLOSE]

2

to load the Cassette.

≥Close the outside compartment Cover.

4

Start recording.

(l 21)

≥Turn the Palmcorder on. (l 15)

≥Rotate the Switch

3

to [ON]. (The [CAMERA] Lamp lights up.)

≥Press the

4

Button. (Recording starts.)

≥Press the

4

Button again to pause the recording.

To View the Playback Picture

5

Switch to the VCR Mode, rewind the tape, and play the tape

back.

(l 31)

≥Set the

5

Switch to VCR mode. (The [VCR] Lamp lights up.)

≥Press the

6

Button. (Rewind the tape.)

≥Press the

7

Button. (Playback starts.)

≥Press the

8

Button. (Playback stops.)

6

Turn the Palmcorder off.

(l 15

)

≥Set the

9

Switch to [OFF].

MJ147-P.book 7 ページ２００２年４月２４日　水曜日　午後１時５６分

8

Controls and Components

1) LCD Monitor (l 15, 69)

................................................................................................................................

................................................................................................................................................................................................................................................................

......................................................................................................................................................................

............................................................................

......................................

≥Due to limitations in LCD production technology, there may be some

tiny bright or dark spots on the LCD Monitor screen. However, this is

not a malfunction and does not affect the recorded picture.

......................................................................................................................................................................

2) LCD Monitor Open Tab [OPEN 4] (l 15)

3) Accessory Shoe

≥Accessories, such as a stereo microphone (not supplied), are attached

here.

4) Rewind/Review Button [6] (l 31)

Reverse Search Button [SEARCHs] (l 21)

Recording Check Button [S] (l 21)

5) Play Button [1] (l 31, 40, 42)

Backlight Button [BACKLIGHT] (l 24)

6) Fast Forward/Cue Button [5]

(l 31)

Forward Search Button [SEARCHr] (l 21)

7) MAGICPIX Button [MAGICPIX] (l 24)

8) Stop Button [∫] (l 31, 40, 42)

Fade Button [FADE] (l 23)

9) Still Button [;] (l 32, 40, 42)

Camera Still Button [CAMERA STILL] (l 22)

10) 1.5 Times Tele Jump Zoom Button [TELE JUMP] (l 22)

11) Title Button [TITLE] (l 43)

12) Multi-Picture Button [MULTI] (l 30, 43)

Picture-in-Picture Button [P-IN-P] (l 30)

13) Tape/Card PhotoShot Selector [TAPE/CARD/CARD MODE]

(l 21, 37)

14) Card Access Lamp [ACCESS] (l 37)

15) Card Slot Cover (l 37)

16) Card Slot (l 37)

17) Viewfinder (l 15, 69)

.........................................................................................................................

≥Due to limitations in LCD production technology, there may be some

tiny bright or dark spots on the Viewfinder screen. However, this is not

a malfunction and does not affect the recorded picture.

.........................................................................................................................

18) Eyepiece Corrector Knob (l 15)

19) Battery Eject Button [PUSH BATT] (l 12)

20) Menu Button [MENU] (l 16)

21) Mode Selector Switch [AUTO/MANUAL/FOCUS] (l 21, 25, 26, 27)

22) Battery Holder (l 12)

23) Shoulder Strap Holders (l 14)

24) Viewfinder Pull Knob (l 15)

25) Multi-Function Dial [PUSH] (l 16, 20, 26, 27, 31, 32)

26) PhotoShot Button [PHOTO SHOT] (l 22, 37, 38)

27) Zoom Lever [W/T] (l 22, 23)

28) Grip Belt (l 13)

29) Quick Start Lamp (l 25)

30) Quick Start Button [QUICK START] (l 25)

31) Recording Start/Stop Button (l 21, 29, 30)

32) Off/On Mode Selector Switch [OFF/ON/MODE] (l 15, 21, 31)

33) Operation Mode Lamps [CAMERA/VCR/CARD P.B.]

(l 16, 21, 31, 40)

34) Tripod Receptacle

≥Use for mounting the Palmcorder on an optional tripod.

1)

2)

3)

13) 14) 16)15)

17)

18)

19)

20)

21)

22)

23)

26)

25)

24)

27)

28)

34)

6)5)

8)7)

10) 12)11)

9)

4)

O

F

O

N

M

O

D

E

START

QUICK

CAMERA

VCR

CARD

P. B .

29)

30)

31)

32)

33)

SEARCH

MAGICPIX

BACKLIGHT

FADE

CAMERA STILL

MULTI/

P-IN-P

TITLE

TELE JUMP

MJ147-P.book 8 ページ２００２年４月２４日　水曜日　午後１時５６分

9

35) Reset Button [RESET] (l 74)

36) Speaker

37) Cassette Compartment Cover (l 14)

38) Cassette Cover Close Button [PUSH CLOSE] (l 14)

39) Cassette Holder

40) Cassette Eject Lever [OPEN/EJECT] (l 14)

41) Lens Hood (l 69)

42) Lens (LEICA DICOMAR)

≥LEICA is a registered trademark of Leica microsystems IR GmbH and

DICOMAR is a registered trademark of Leica Camera AG.

43) Free Angle Flash (l 28)

44) Microphone (Built-in, stereo) (l 22)

45) White Balance Sensor (l 27, 70)

Remote Control Sensor (l 11)

46) Tally Lamp (l 21)

47) Microphone Jack [MIC] (l 22, 64)

≥Connecting with an external microphone or audio equipment. (When

this Jack is in use, the built-in microphone does not operate.)

48) Audio-Video Input/Output Jack [A/V IN/OUT] (l 36)

Headphone Jack [PHONES] (l 63)

Tethered Remote Control Jack [REMOTE] (l 10)

≥Connecting an AV Cable or Tethered Remote Control to this Jack

activates the Palmcorder’s built-in speaker, but connecting a

headphone, etc. deactivates it.

≥When plugging the pin plug of the AV cable into the AV output terminal,

plug it in as far as it goes.

49) S-Video Input/Output Jack [S-VIDEO IN/OUT] (l 36)

50) USB Jack [TO PC] (l 50)

51) Digital Still Picture Terminal [DIGITAL STILL PICTURE]

52) DV Input/Output Terminal (i.LINK) [¥] (l 47)

≥Connect this to the digital video equipment.

≥“i.LINK” is the name of connectors in accordance with IEEE1394-1995.

“¥” is a logo marked on products conforming with the “i.LINK”

specifications.

53) Lens Cap String Holder (l 13)

54) Flash Sensor (l 28)

35)

36)

37)

38)

39)

40)

41)

42)

43)

44)

45)

46)

S-VIDEO

IN/OUT

A/V IN/OUT

PHONES/

REMOTE

MIC

53)

47) 48) 49)

DIGITAL

STILL

PICTURE

TO PC

DV

50) 51) 52)

54)

MJ147-P.book 9 ページ２００２年４月２４日　水曜日　午後１時５６分

10

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

61 5

;

ED

VAR.

SEARCH

P.B.

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

61 5

;

ED

VAR.

SEARCH

P.B.

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

61 5

;

ED

VAR.

SEARCH

P.B.

ZOOM

7)

6)

10)

8)

9)

18)

19)

17)

16)

20)

21)

22)

23)

24)

25)

3)

2)

1)

4)

11)

12)

13)

14)

15)

26)

27)

28)

29)

30)

5)

Remote Controller

Using the wireless Remote Controller that is supplied with the Palmcorder,

most of the Palmcorder functions can be operated from a distance.

Remote Controller Buttons

1) Date and Time Button [DATE/TIME] (l 60)

2) Indication Output Button [OSD] (l 36)

3) Counter Reset Button [RESET] (l 70)

4) Indication Shift Button [COUNTER] (l 60)

5) Multi-Picture/Picture-in-Picture Button [MULTI/P-IN-P] (l 30, 41)

6) Recording Button [REC] (l 47)

7) Audio Dubbing Button [A.DUB] (l 36)

8) Upward Direction Button [π] (for Playback Zoom Function) (l 34)

9) Left/Right Direction Button [∑, ∏] (for Playback Zoom Function)

(l 34)

10) Downward Direction Button [∫] (for Playback Zoom Function)

(l 34)

11) Slow Motion/Still Advance Button [E, D]

(E : reverse direction, D: normal direction) (l 32)

12) Index Search Button [:, 9]

(:: reverse direction, 9: normal direction) (l 33)

13) Selection Button [SELECT] (l 34)

14) Store Button [STORE] (l 34)

15) Off/On Button [OFF/ON] (l 34)

16) Zoom/Volume Button [ZOOM/VOL] (l 22, 23, 31, 34)

17) Variable Speed Search Button [VAR.SEARCH] (l 31)

18) Playback Zoom Button [P.B. ZOOM] (l 34)

19) Speed Selection Button [π, ∫] (for Variable Speed Search Function)

(l 31)

The following buttons function in the same manner as the corresponding

buttons on the Palmcorder.

20) PhotoShot Button [PHOTO SHOT] (l 22, 37)

21) Recording Start/Stop Button [START/STOP] (l 21)

22) Title Button [TITLE] (l 43)

23) Menu Button [MENU] (l 16)

24) Item Set Button [SET] (l 16)

25) Item Select Button [ITEM] (l 16)

26) Fast-forward/Cue Button [5] (l 31)

27) Play Button [1] (l 31, 40)

28) Rewind/Review Button [6] (l 31)

29) Pause Button [;] (l 32, 40)

30) Stop Button [∫] (l 31, 40)

ª Tethered Remote Control

This controller allows the scene to be shot in various angles, high to low and

is also convenient when a Tripod is used. When you do not use this

controller, attach the clip to the Grip Belt for convenience.

This controller allows the camera to be used more conveniently by a

left-handed user.

≥When using the Tethered Remote control, plug it in as far as it goes.

1

Recording Start/Stop Button [REC]

2

Zoom Lever [W/T]

3

PhotoShot Button [PHOTO SHOT]

1

3

2

MJ147-P.book 10 ページ２００２年４月２４日　水曜日　午後１時５６分

11

1

3

2

1

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

61 5

;

ED

VAR.

SEARCH

P.B.

ZOOM

21

1

15˚

ª Inserting the Button-type Battery

Before using the remote controller, insert the supplied button-type battery.

1

While pressing the Stopper

1

, pull out the Battery Holder.

2

Insert the button-type battery with the imprint (

i

) facing

upward.

3

Insert the Battery Holder into the Remote Controller.

≥When the button-type battery becomes weak, replace it with a new CR2025

battery. (A battery is normally expected to last about one year. However, it

depends on operation frequency.)

≥Be sure to match the poles properly when inserting the battery.

................................................................................................................................

................................................................................................................................................................................................................................................................

......................................................................................................................................................................

............................................................................

......................................

Warning

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

equipment manufacturer. Discard used batteries according to

manufacturer’s instructions.

Risk of fire, explosion and burns. Do not recharge, disassemble, heat

above 212°F (100°C) or incinerate. Keep the Button-Type battery out of

the reach of children. Never put Button-Type battery in mouth. If

swallowed, call your doctor.

................................................................................................................................

................................................................................................................................................................................................................................................................

......................................................................................................................................................................

............................................................................

......................................

Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only.

Use of another battery may present a risk of fire or explosion.

Caution: Battery may explode if mistreated.

Dispose of used battery promptly. Keep away from children.

Do not recharge, disassemble or dispose of in fire.

ª Using the Remote Controller

1

Direct the Remote Controller at the Remote Control Sensor

on the Palmcorder and press the desired button.

≥Distance from the Palmcorder: Within approximately 15 feet (5 meters)

≥Angle: Approximately 15 degrees in the vertical and horizontal

directions from the central axis

≥The above operating ranges are for indoor use. Outdoors, or under strong

light, the equipment may not operate properly even within the above

ranges.

≥Within 3 feet (1 meter) range, you can also use the Remote Controller on

the side (the LCD Monitor side) of the Palmcorder.

Selecting Remote Controller Modes

When two Palmcorders are used simultaneously, they can be operated

individually by selecting different Remote Controller Modes.

≥If the Remote Controller Mode on the Palmcorder and Remote Controller do

not match, [REMOTE] is displayed.

Setting on the Palmcorder:

Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the desired

Remote Controller Mode.

Setting on the Remote Controller:

[VCR1]: Press the [D] Button and [∫] Button simultaneously.

1

[VCR2]: Press the [E] Button and [∫] Button simultaneously.

2

≥When the battery in the Remote Controller is replaced, the Mode is

automatically reset to [VCR1] Mode.

MJ147-P.book 11 ページ２００２年４月２４日　水曜日　午後１時５６分

12

CGR

-

CGR

-

CGR

-

CGP

-

CGR

-

3

2

1

CGR-D14

A

B

A

B

A

B

1 h 30 min.

2 h.

3 h 15 min.

2 h 10 min.

(1 h 45 min.)

3 h 10 min.

(2 h 30 min.)

5 h 25 min.

(4 h 25 min.)

5 h 20 min.

10 h 10 min.

(8 h 15 min.)

CGR-D08A/1B

A

B

1 h.

1 h 35 min.

(1 h 15 min.)

CGR-D16A/1B

CGP-D28A/1B

CGR-D53A/1K

Power Supply

ª Using the AC Adaptor

1

Insert the battery-shaped connector of the DC Cable into the

Battery Holder on the Palmcorder.

2

Connect the DC Cable to the [DC OUT] Jack on the AC

Adaptor.

3

Connect the AC Adaptor and AC Cable.

≥The AC Cable’s outlet plug cannot be pushed fully into the AC Adaptor

Jack. A gap will remain as shown

1

.

≥Before connecting or disconnecting the power supply, set the [OFF/

ON/MODE] Switch on the Palmcorder to [OFF] and make sure that

neither [CAMERA/VCR/CARD P.B.] Lamps or Quick Start Recording

Lamp is lit.

≥Battery cannot be charged if DC Cable is connected to AC Adapter.

ª Using the Battery

Before use, fully charge the battery.

1

Attach the Battery to AC Adaptor and charge it.

≥Since the Battery will not be charged when the DC Cable is connected

to the AC Adaptor, disconnect it.

≥The [POWER] Lamp and [CHARGE] Lamp lights up, and charging

starts.

≥When the [CHARGE] Lamp goes off, charging is completed.

2

Attach the charged Battery to the Palmcorder.

Disconnecting the Power Source

Set the [OFF/ON/MODE] Switch

1

to [OFF], and while pressing the

[PUSH BATT] Button

2

, slide the Battery or DC Input Lead upward to

disconnect it.

≥When attaching or removing battery, set [OFF/ON/MODE] Switch to

[OFF] and make sure the Operation Mode Lamp is not lit.

≥For other notes, see page 61.

~~~~~~~~~~~~~~~~~~~~~~~~

Charging Time and Available Recording Time

A

Charging Time

B

Maximum Continuous Recording Time

≥“1 h 20 min.” indicates 1 hour and 20 minutes.

≥Battery CGR-D14 is supplied.

≥The hours shown in the table are approximate hours. The numeric

characters in parentheses indicate the recording time when the LCD

monitor is used. In actual use, the available recording time may be shorter

in some cases.

≥The hours shown in the table are for continuous recording at a temperature

of 68xF (20xC) and humidity of 60%. If the Battery is charged at a higher or

lower temperature, the charging time may be longer.

1

2

PUSH

BAT T

1

O

F

O

N

M

O

D

E

147P_text.fm 12 ページ２００２年４月２４日　水曜日　午後３時３２分

13

1

2

3

4

1

2

1

Lens Cap and Grip Belt

ª Attach the Lens Cap

To protect the Lens surface, attach the Lens Cap.

1

Detach the Grip Belt from the Grip Belt Holder.

2

Pass the end of the Lens Cap String through the Lens Cap

String holder.

3

Pass the other end of the String through the loop made by

the String itself and pull it toward the direction indicated by

an arrow.

4

Fit the lens cap onto the lens cap string.

≥The removed Lens Cap can be hooked onto the Grip Belt

1

. (When you

are not recording, be sure to keep the Lens Cap attached to the Lens for

protection.)

≥Lens Cap cannot be attached when the supplied Lens Hood for Card Mode

Picture Recording is being used.

ª Adjust the Grip Belt

Adjust the length of the Grip Belt to the size of your hand.

1

11

1

Detach the tip of the Grip Belt and adjust the length of it.

2

22

2

Reattach the tip of the Grip Belt.

ª To Use as a Free Style Grip Belt

Using the Grip Belt as the Free Style Grip Belt makes it easier to handle and

carry the Palmcorder.

1

It is also more convenient to use with the Tethered

Remote control.

1

Detach the tip of the Grip Belt from the Grip Belt Holder and

adjust the length of it.

2

Attach the Grip Belt around your wrist.

147P_text.fm 13 ページ２００２年４月２４日　水曜日　午後５時１３分

14

Attaching the Shoulder Strap

We recommend that you attach the Shoulder Strap before going outdoors to

record so as to avoid dropping the Palmcorder.

1

Pass the tip of the Shoulder Strap through the Shoulder

Strap Holders on the Palmcorder and pull the Shoulder

Strap.

2

Fold the tips of the Shoulder Strap, pass it through the

Shoulder Strap Length Adjuster, and pull it.

≥Pull it out more than 1 inch (2 cm)

1

from the Shoulder Strap Length

Adjuster so that it cannot slip off.

≥Please perform this step on the other side as well.

~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Cassette

When power is supplied to the Palmcorder, the cassette can be taken out

without turning the Palmcorder on.

1

Slide the [OPEN/EJECT] Lever toward the front and pull

down to open the Cassette Compartment Cover.

2

Insert a Cassette.

3

Close the Cassette Holder by pressing the [PUSH CLOSE]

Button.

4

Close the Cassette Compartment Cover.

≥For other notes, see page 61.

ª Accidental Erasure Prevention

Opening the accidental erasure prevention slider

1

on the cassette (by

sliding it in the [SAVE] arrow direction) prevents recording. To enable

recording, close the accidental erasure protection slider (by sliding it in the

[REC] arrow direction.)

R E C

SAVE

1

4

CLOSE

PUSH

3

2

1

OPEN/

EJECT

1

2

1

MJ147-P.book 14 ページ２００２年４月２４日　水曜日　午後１時５６分

15

45

180x 90x

LCD/EVF SET

PUSH MENU TO RETURN

LCD BRIGHTNESS

LOW||||----HIGH

LCD COLOR LEVEL

LOW||||----HIGH

EVF BRIGHTNESS

LOW||||----HIGH

1

2

3

2

1

O

F

O

N

M

O

D

E

Turning on/off the Palmcorder and Selecting

Modes

Turn on the power first and then select Modes.

ª How to Turn on the Power

1

Set the [OFF/ON/MODE] Switch to [ON] while pressing the

center Button

1

.

≥The [CAMERA] Lamp lights up.

ª How to Switch Modes

2

Rotate the [OFF/ON/MODE] Switch.

≥With each slide of the Switch, the Mode switches in the order of Camera

Mode, VCR Mode, and Card Playback Mode.

≥The appropriate Mode Lamp lights up.

ª How to Turn off the Power

3

Set the [OFF/ON/MODE] Switch to [OFF] while pressing the

center Button

1

.

~~~~~~~~~~~~~~~~~~~~~~~~~

Using the Viewfinder

Before using the Viewfinder, adjust the field of view so that the displays inside

the Viewfinder become clear and easy to read.

1

Hold the Viewfinder Pull knob

1

, pull out the Viewfinder and

tilt it up.

2

Adjust the Viewfinder by sliding the Eyepiece Corrector

Knob

2

.

Using the LCD Monitor

With the LCD Monitor open, you can also record the picture while watching it.

1

11

1

Set the [OFF/ON/MODE] Switch to [ON].

2

22

2

Put your finger on the [OPEN 4] Tab

3

and pull the LCD

Monitor out about 90x in the direction of the arrow.

≥The Viewfinder goes off.

3

33

3

Adjust the LCD Monitor angle according to the desired

recording angle.

≥The LCD Monitor can rotate a maximum of 180x

4

from the vertical

position to the upward direction and a maximum of 90x

5

to the

downward direction. Forcefully rotating the LCD monitor beyond these

ranges will damage the Palmcorder.

Closing the LCD monitor

Push the LCD Monitor until it is securely locked.

ª Adjusting Brightness and Color Level

When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],

the following items are displayed:

LCD Brightness [LCD BRIGHTNESS]

Adjusts the brightness of the image on the LCD screen.

LCD Color Level [LCD COLOR LEVEL]

Adjusts the color saturation of the image on the LCD screen.

Brightness of the Viewfinder [EVF BRIGHTNESS]

Adjust the brightness of the image in the Viewfinder.

1

Press the [PUSH] Dial and select the item you want to adjust.

2

Rotate the [PUSH] Dial and increase or decrease the number

of the vertical bars on the Bar Indication.

≥The Bar Indication has 8 steps. A larger number of vertical bars

indicates stronger brightness or color saturation.

Increasing the Brightness of the Entire LCD Monitor

Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].

≥These adjustments do not affect the recorded images.

≥For other notes, see page 69.

CAMERA

VCR

CARD

P.B.

O

F

O

N

M

O

D

E

1, 2

3

1

MJ147-P.book 15 ページ２００２年４月２４日　水曜日　午後１時５６分

16

Using the Menu Screen

To facilitate the selection of a desired function or setting, this Palmcorder

displays various function settings on menus.

1

Press the [MENU] Button.

≥The Menu corresponding to the Mode selected by using the [OFF/ON/

MODE] Switch

1

is displayed.

≥When the [CAMERA] Lamp is on, the Camera Function Menu is

displayed.

2

≥When the [VCR] Lamp is on, the VCR Function Menu is displayed.

3

≥When the [CARD P.B.] Lamp is on, the Card Function Menu is

displayed.

4

2

Rotate the [PUSH] Dial to select a desired Sub-Menu.

3

Press the [PUSH] Dial to display the selected Sub-Menu.

4

Rotate the [PUSH] Dial to select the item to be set.

5

Press the [PUSH] Dial to set the selected item to a desired

Mode.

≥With each press of the [PUSH] Dial, the cursor [1] brings up a

subsequent Mode. Menu items that cannot be used in combination with

the selected menu items are displayed in dark blue.

≥While a Menu is displayed, you cannot begin to record or play back. Menus

can be displayed during playback but not during recording.

≥The above operations can be carried out using the Remote Controller.

(l 10)

≥To display the Menu, press the [MENU] Button

5

on the Remote

Controller.

≥To select items on the Menu, press the [ITEM] Button

6

on the

Remote Controller.

≥To set the mode for the selected items, press the [SET] Button

7

on the Remote Controller.

To Exit the Menu Screen

Press the [MENU] Button again.

About the Menu Mode Setting

The setting selected on the Menu will be retained even when the Palmcorder

is turned off. However, if the Battery or AC Adaptor is disconnected before

turning the Palmcorder off, the selected setting may not be retained.

(But, the setup of [EFFECT2] (l 29) is not retained.)

≥Menu operation flow is shown in this text by >>.

ª File Selection in the Card Playback Mode

A File Selection Operation may be necessary during Menu Operations. In this

case, carry out the following procedure.

1

11

1

Turn the [PUSH] Dial and select a file.

≥The selected file is marked by a frame

8

.

2

22

2

Press the [PUSH] Dial to confirm the selection of the file.

≥After the above File Selection Procedure, carry out the various Menu

Operations. (The above procedure will not be repeated in the following

instructions.)

PICTURE

No.25 100-0012

8

2

CAMERA FUNCTIONS

PUSH MENU TO EXIT

1.

CAMERA SETUP

2.

DIGITAL EFFECT

3.

CARD SETUP

5.

RECORDING SETUP

6.

DISPLAY SETUP

7.

OTHER FUNCTIONS

PUSH MENU TO EXIT

2.

DIGITAL EFFECT

3.

CARD SETUP

4.

MULTI-PICTURES

5.

RECORDING SETUP

6.

AV IN/OUT SETUP

7.

DISPLAY SETUP

8.

OTHER FUNCTIONS

1.

PLAYBACK FUNCTIONS

CARD FUNCTIONS

PUSH MENU TO EXIT

1.

DELETE CARD FILE

2.

CARD EDITING

3.

DISPLAY SETUP

4.

OTHER FUNCTIONS

VCR FUNCTIONS

3

4

4.

MULTI-PICTURES

1

2, 3, 4, 5

CAMERA

VCR

CARD

P.B.

2

3

4

ZOOM

INDEX INDEX

SELECT

STORE

STOP

KL

∫

OSD

COUNTER

V

/REW

STILL ADV

OFF/ON

P.B.DIGITAL

DATE/

TIME

RESET

TITLE

T

W

sVOL r

¥REC

MULTI/

P-IN-P

PHOTO

SHOT

START/

STOP

A.DUB

PLAY

PAUSE

FF/

W

STILL ADV

MENU

ITEM

SET

61 5

;

ED

VAR.

SEARCH

P. B.

ZOOM

5

7

6

PUSH

W.B./SHUTTER/IRIS/

MF/VOL/JOG

M

E

N

U

1

O

F

O

N

M

O

D

E

MJ147-P.book 16 ページ２００２年４月２４日　水曜日　午後１時５６分

17

PROG.AE OFF

5 7

4 Ω º

RETURN ---- YES

PROGRESSIVE AUTO ON OFF

EIS

D.ZOOM

OFF ON

OFF 25 700

CINEMA OFF ON

RETURN

CAMERA SETUP

PUSH MENU TO EXIT

1)

2)

3)

4)

5)

6)

7)

8)

DATE/TIME

C.DISPLAY LINEAR MEMORY

T.CODE

RETURN ---- YES

OFF D/T DATE

C.RESET ---- YES

DISPLAY ALL PARTIAL OFF

LCD/EVF SET ---- YES

LCD MODE NORMAL BRIGHT

DISPLAY SETUP

PUSH MENU TO EXIT

25)

26)

27)

28)

29)

30)

13)

14)

15)

16)

SCAN MODE

SPEED FAST NORMAL SLOW

RETURN ---- YES

STROBE MANUAL

SWING OFF ON

P-IN-P 1 2 3 4

MULTI-PICTURES

PUSH MENU TO EXIT

WIPE MIX STROBE

GAIN-UP TRAIL

MOSAIC MIRROR

EFFECT1

MONO SOLARI

OFF MULTI P-IN-P

EFFECT2 OFF NEGA SEPIA

RETURN ---- YES

DIGITAL EFFECT

PUSH MENU TO EXIT

9)

10)

11)

12)

CARD SETUP

PUSH MENU TO EXIT

PICTURE SIZE

1280 960

640 480

RETURN ---- YES

FINE NORMAL

PICTURE QUALITY

FINE NORMAL ECONOMY

MPEG4 MODE

---- YES

CREATE TITLE

REC-SPEED

AUDIO-REC 12bit

16bit

RETURN ---- YES

SP LP

INDEX 2HOUR DAY

WIND-CUT OFF ON

RECORDING SETUP

PUSH MENU TO EXIT

17)

18)

19)

20)

OFF ON

ZOOM MIC

FLASH

ON AUTO

RED EYE REDUCTION

OFF

ON

22)

23)

21)

FLASH LEVEL

24)

s NORMAL r

REMOTE

TALLY LED OFF ON

VCR1 VCR2 OFF

BEEP OFF ON

SHUTTER OFF ON

SELF-REC NORMAL MIRROR

CLOCK-SET

---- YES

OTHER FUNCTIONS

PUSH MENU TO EXIT

31)

32)

33)

34)

35)

36)

37)

VOICE POWER SAVE OFF ON

RETURN ---- YES

List of Menus

The illustrations of the Menus are for explanation purposes only, and they are

different from the actual Menus.

Camera Mode Main-Menu [CAMERA FUNCTIONS]

[CAMERA SETUP] Sub-Menu

1) Auto Exposure Mode [PROG.AE] (l 25)

2) Progressive PhotoShot Mode [PROGRESSIVE] (l 22)

3) Digital Effect Image Stabilizer [EIS] (l 23)

4) Digital Zoom [D.ZOOM] (l 23)

5) Cinema-like Format Recording [CINEMA] (l 24)

6) Returning to the Main-Menu [RETURN]

[DIGITAL EFFECT] Sub-Menu

7) Digital Effects 1 [EFFECT1] (l 29)

8) Digital Effects 2 [EFFECT2] (l 29)

[CARD SETUP] Sub-Menu

9) Picture Size [PICTURE SIZE] (l 37)

10) Picture Quality [PICTURE QUALITY] (l 38)

11) MPEG4 Picture Quality [MPEG4 MODE] (l 39)

12) Title Creation [CREATE TITLE] (l 43)

[MULTI-PICTURES] Sub-Menu

13) Multi-Picture Mode [SCAN MODE] (l 30)

14) Strobe Multi-Picture Speed [SPEED] (l 30)

15) Swing Mode [SWING] (l 30)

16) Position of Small Picture inside Normal Picture [P-IN-P] (l 30)

[RECORDING SETUP] Sub-Menu

17) Recording Speed Mode [REC-SPEED] (l 20)

18) Audio Recording Mode [AUDIO-REC] (l 20, 36)

19) Index Mode [INDEX] (l 33)

20) Wind Noise Reduction [WIND-CUT] (l 25)

≥If this function is set to [ON], the sound of wind hitting the microphone

can be reduced for recording.

21) Zoom Microphone [ZOOM MIC] (l 22)

22) Flash [FLASH] (l 28)

23) Red Eye Reduction [RED EYE REDUCTION] (l 28)

24) Flash Level [FLASH LEVEL] (l 28)

[DISPLAY SETUP] Sub-Menu

25) Date and Time Indication [DATE/TIME] (l 60)

26) Counter Display Mode [C.DISPLAY] (l 60)

27) Counter Reset [C.RESET] (l 70)

≥Set the counter value to zero. However, it cannot reset the Time Code.

28) Display Mode [DISPLAY] (l 60)

29) LCD Brightness [LCD MODE] (l 15)

30) LCD and Viewfinder Adjustment [LCD/EVF SET] (l 15)

[OTHER FUNCTIONS] Sub-Menu

31) Remote Controller Mode [REMOTE] (l 11)

32) Recording Lamp [TALLY LED] (l 21)

33) Beep Sound [BEEP] (l 61)

34) Shutter Effect [SHUTTER] (l 22)

35) Date and Time Setting [CLOCK-SET] (l 20)

36) Self-Recording [SELF-REC] (l 21)

37) Voice Power Save [VOICE POWER SAVE] (l 65)

MJ147-P.book 17 ページ２００２年４月２４日　水曜日　午後１時５６分

18

BLANK SEARCH ---- YES

RETURN ---- YES

RECORD TO CARD ---- YES

PLAYBACK FUNCTIONS

PUSH MENU TO EXIT

INDEX PHOTO SCENE

AUDIO OUT STEREO L R

AUDIO ST1 ST2 MIX

2)

1)

3)

4)

6)

7)

8)

9)

OTHER FUNCTIONS

PUSH MENU TO EXIT

REMOTE VCR1 VCR2 OFF

RETURN ---- YES

CLOCK-SET ---- YES

RECORDING SETUP

PUSH MENU TO EXIT

REC-SPEED SP LP

AUDIO-REC 12bit

16bit

RETURN ---- YES

DISPLAY SETUP

PUSH MENU TO EXIT

DATE/TIME OFF D/T DATE

C.DISPLAY LINEAR MEMORY

T.CODE

C.RESET ---- YES

DISPLAY ALL PARTIAL OFF

RETURN ---- YES

REC DATA OFF ON

LCD MODE NORMAL BRIGHT

LCD/EVF SET ---- YES

15)

16)

10)

11)

5)

CARD SETUP

PUSH MENU TO EXIT

PICTURE QUALITY

FINE NORMAL ECONOMY

RETURN ---- YES

MPEG4 MODE

FINE NORMAL

---- YES

CREATE TITLE

DIGITAL EFFECT

PUSH MENU TO EXIT

RETURN ---- YES

EFFECT OFF ON

EFFECT SELECT

OFF MULTI WIPE MIX

STROBE NEGA SEPIA

MONO TRAIL SOLARI

MOSAIC MIRROR

AV IN/OUT SETUP

PUSH MENU TO EXIT

AV JACK

RETURN ---- YES

OFF ON

MIC AV IN

IN/OUT OUT/PHONES

A.DUB INPUT

DV OUT

17)

18)

19)

20)

12)

13)

14)

SCAN MODE

SPEED FAST NORMAL SLOW

RETURN ---- YES

STROBE MANUAL

SWING OFF ON

MULTI-PICTURES

PUSH MENU TO EXIT

VCR Mode Main-Menu [VCR FUNCTIONS]

[PLAYBACK FUNCTIONS] Sub-Menu

1) Blank Search [BLANK SEARCH] (l 32)

2) Recording to Card [RECORD TO CARD] (l 38)

3) Index Search Mode [INDEX] (l 33)

4) Audio Selector [AUDIO] (l 36)

5) Audio Output Mode [AUDIO OUT] (l 64)

6) Returning to the Main-Menu [RETURN]

[DIGITAL EFFECT] Sub-Menu

7) Digital Effect On/Off [EFFECT] (l 34)

8) Digital Effect Selection [EFFECT SELECT] (l 34)

[CARD SETUP] Sub-Menu

9) Picture Quality [PICTURE QUALITY] (l 38)

10) MPEG4 Picture Quality [MPEG4 MODE] (l 40)

11) Title Creation [CREATE TITLE] (l 43)

[MULTI-PICTURES] Sub-Menu

12) Multi-Picture Mode [SCAN MODE] (l 35)

13) Strobe Multi-Picture Speed [SPEED] (l 30, 35)

14) Swing Mode [SWING] (l 35)

[RECORDING SETUP] Sub-Menu

15) Recording Speed Mode [REC-SPEED] (l 20)

16) Audio Recording Mode [AUDIO-REC] (l 20, 36)

[AV IN/OUT SETUP] Sub-Menu

17) AV Jack [AV JACK] (l 36, 46, 63)

18) Audio Dubbing Input [A.DUB INPUT] (l 36)

19) AD Conversion Output [DV OUT] (l 47)

[DISPLAY SETUP] Sub-Menu

20) Camera Data [REC DATA]

≥If you set [REC DATA] to [ON], the settings (shutter speed (l 26), iris

(l 26) and white balance settings (l 27), etc.) used during the

recordings are displayed during playback. [---] appears on the display

when there is no data.

≥The settings information may not displayed properly if the camera data

of this Palmcorder are played back on other equipment.

The camera data will not be recorded in the following cases:

≥When the data are recorded from a card to a tape.

≥When recording proceeds with no input signals supplied.

≥When recording involves the use of the S-Video or AV Input Jack.

≥When pictures with no camera data are recorded using the DV

Terminal.

≥When displaying a list of titles.

All of the other items on the [DISPLAY SETUP] Sub-Menu are the same as

those on the [DISPLAY SETUP] Sub-Menu of the [CAMERA FUNCTIONS]

Main-Menu.

[OTHER FUNCTIONS] Sub-Menu

≥Same as described on page 17.

MJ147-P.book 18 ページ２００２年４月２４日　水曜日　午後１時５６分

19

Card Playback Mode Main-Menu [CARD FUNCTIONS]

[DELETE CARD

FILE] Sub-Menu

1) Selecting and deleting a File [DELETE FILE BY SELECTION] (l 44)

2) Deleting All Files [DELETE ALL FILES] (l 44)

3) Selecting and Deleting a Title [DELETE TITLE BY SELECTION] (l 44)

[CARD EDITING] Sub-Menu

4) Recording to Cassette [RECORD TO TAPE] (l 41)

5) Searching a File [FILE SEARCH] (l 41)

6) Setting the Lock [FILE LOCK] (l 44)

7) Setting a Slide Show [SLIDE SHOW] (l 42)

8) Setting DPOF [DPOF SETTING] (l 45)

9) Formatting a Card [CARD FORMAT] (l 45)

[DISPLAY SETUP] Sub-Menu

≥Same as described on page 17.

[OTHER FUNCTIONS] Sub-Menu

≥Same as described on page 17.

Short-Cut Menus of the Card Playback Mode

A

If you use the Short-Cut Menu, the Card Playback Mode Menu can be called

up quickly. Press the [PUSH] Dial to display the Short-Cut Menu, and turn the

[PUSH] Dial to select the desired Menu.

10) [FILE SEARCH]:

The [FILE SEARCH] Menu for finding files by number appears. (l 41)

11) [DELETE FILE]:

The [DELETE FILE] Menu for deleting the file being displayed appears.

(l 44) Use this Menu after the file to be erased appears.

12) [FILE LOCK]:

The [FILE LOCK] Menu to prevent the accidental erasure of files (Lock

Setting) being displayed appears. (l 44) Use this Menu after the file to

be locked appears.

13) [DPOF SETTING]:

The [DPOF SETTING] Menu for performing the DPOF settings for the

displayed picture appears. (l 45) Use this Menu after the picture whose

DPOF settings are to be performed has appeared.

14) [EXIT]:

For terminating the Short-Cut Menu.

PUSH MENU TO EXIT

RETURN ---- YES

DISPLAY SETUP

PUSH MENU TO EXIT

DATE/TIME OFF D/T DATE

C.DISPLAY LINEAR MEMORY

T.CODE

C.RESET ---- YES

DISPLAY ALL PARTIAL OFF

LCD MODE NORMAL BRIGHT

LCD/EVF SET ---- YES

DPOF SETTING ---- YES

CARD EDITING

PUSH MENU TO EXIT

RECORD TO TAPE ---- YES

FILE SEARCH ---- YES

RETURN ---- YES

FILE LOCK ---- YES

SLIDE SHOW ---- YES

CARD FORMAT ---- YES

DELETE CARD FILE

1.

DELETE FILE

BY SELECTION

2.

DELETE ALL FILES

3.

DELETE TITLE

BY SELECTION

1)

2)

3)

4)

5)

6)

7)

8)

9)

10)

11)

12)

13)

14)

FILE SEARCH

DELETE FILE

FILE LOCK

DPOF SETTING

EXIT

A

RETURN ---- YES

OTHER FUNCTIONS

PUSH MENU TO EXIT

REMOTE VCR1 VCR2 OFF

CLOCK-SET ---- YES

VOICE POWER SAVE OFF ON

MJ147-P.book 19 ページ２００２年４月２４日　水曜日　午後１時５６分

20

CLOCK-SET

PUSH MENU TO RETURN

YEAR :2002

MONTH :OCT

DAY :20

HOUR : 8PM

MINUTE:46

1, 3 1, 2

PUSH

W.B./SHUTTER/IRIS/

MF/VOL/JOG

M

E

N

U

CAMERA FUNCTIONS

PUSH MENU TO EXIT

1.

CAMERA SETUP

2.

DIGITAL EFFECT

3.

CARD SETUP

4.

MULTI-PICTURES

5.

RECORDING SETUP

6.

DISPLAY SETUP

7.

OTHER FUNCTIONS

1

2

AUDIO-REC

REC-SPEED

AUDIO-REC 12bit

RETURN ---- YES

SP LP

INDEX 2HOUR

WIND-CUT OFF

RECORDING SETUP

PUSH

MENU TO EXIT

ZOOM MIC

ON

REC-SPEED

12bit

16bit

RETURN ---- YES

SP

INDEX 2HOUR

WIND-CUT OFF

RECORDING SETUP

PUSH

MENU TO EXIT

ZOOM MIC

ON

FLASH

ON

RED EYE REDUCTION

OFF

FLASH LEVEL

NORMAL

FLASH

ON

RED EYE REDUCTION

OFF

FLASH LEVEL

NORMAL

Setting Date and Time

1

Press the [MENU] Button and rotate the [PUSH] Dial to select

[OTHER FUNCTIONS] >> [CLOCK-SET] >> [YES].

2

Rotate and press the [PUSH] Dial to select [YEAR]/[MONTH]/

[DAY]/[HOUR]/[MINUTE] and set it to a desired value.

≥Year will cycle in the order shown below.

2000 ) 2001 ) ... ) 2089 ) 2000 ) ...

3

Press the [MENU] Button to finish setting the date and time.

≥The clock operation starts from [00] seconds.

≥The menu will disappear when the [MENU] button is pressed again.

≥It is possible that the built-in clock in the Palmcorder may become

inaccurate. Please check the time before recording. If the [0] Indication is

flashing, charge the built-in lithium battery and reset the date and time.

~~~~~~~~~~~~~~~~~~~~~~~~

Internal Lithium Battery Recharge

The internal lithium battery sustains the operation of the clock. When the [0]

Indication

1

is lit, the internal lithium battery is near exhaustion.

1

Connect the AC Adaptor to the Palmcorder with the power

turned off and then connect to the AC Jack.

≥After charging for 4 hours, the built-in lithium battery can power the

clock for approximately 3 months.

~~~~~~~~~~~~~~~~~~~~~~~~

LP Mode

A desired recording speed can be selected with [REC-SPEED] on the

[RECORDING SETUP] Sub-Menu.

1

If LP Mode is selected, the recording time becomes 1.5 times longer

than that of SP Mode.

Although the image quality does not decrease with the LP Mode recording,

mosaic-like noise patterns may appear on a playback image, or some normal

functions may be restricted.

≥The contents that are recorded in LP Mode are not completely compatible

with other equipment.

≥Audio Dubbing is not possible with LP Mode. (l 36)

~~~~~~~~~~~~~~~~~~~~~~~~

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO-REC]

on the [RECORDING SETUP] Sub-Menu.

2

High sound-quality recording is possible with “16bit 48kHz 2 track” Mode.

With the “12bit 32kHz 4 track” Mode, the original sound can be recorded on

2 tracks in stereo, while the other 2 tracks can be used for re-recording.

1

MJ147-P.book 20 ページ２００２年４月２４日　水曜日　午後１時５６分

La page charge ...

Panasonic PVDC352 Mode d'emploi

Ce manuel convient également à

Panasonic PVDC352 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents