Samsung HW-K430 Guide de démarrage rapide

Marque: Samsung

Modèle: HW-K430

Catégorie: Cheminées

Taper: Guide de démarrage rapide

For further information, refer to the Web Manual.

Web manual : www.Samsung.com

Support

Product name search HW-K430

User Manual

HW-K430

* Design and specifications are subject to change without prior notice.

· 1 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation

instructions.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

CAUTION (for Canada)

This equipment complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or

transmitter.

This device may automatically discontinue transmission if there is no information to transmit, or an operational

failure. Note that this is not intended to prohibit the transmission of control or signaling information or the use of

repetitive codes where required by the technology.

This Class B digital apparatus complies with Canadian ICES-003.

FCC Radiation Exposure Statement

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

· 2 · English

Important Safety Instructions

Read these operating instructions carefully before

using the unit. Follow all the safety instructions listed

below. Keep these operating instructions handy for

future reference.

1) Read these instructions.

2) Keep these Instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other.

A grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by

the manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus. When a cart is

used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as when the

power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

PRECAUTIONS

1. Ensure that the AC power supply in your house

complies with the power requirements listed on the

identification sticker located on the back of your

product. Install your product horizontally, on a

suitable base (furniture), with enough space around it

for ventilation (3~4 inches). Make sure the ventilation

slots are not covered. Do not place the unit on

amplifiers or other equipment which may become

hot. This unit is designed for continuous use. To fully

turn off the unit, disconnect the AC plug from the wall

outlet. Unplug the unit if you intend to leave it unused

for a long period of time.

2. During thunderstorms, disconnect the AC plug from

the wall outlet. Voltage peaks due to lightning could

damage the unit.

3. Do not expose the unit to direct sunlight or other

heat sources. This could lead to overheating and

cause the unit to malfunction.

4. Protect the product from moisture (i.e. vases), and

excess heat (e.g. a fireplace) or equipment creating

strong magnetic or electric fields. Unplug the power

cable from the AC wall socket if the unit

malfunctions. Your product is not intended for

industrial use. It is for personal use only.

Condensation may occur if your product has been

stored in cold temperatures. If transporting the unit

during the winter, wait approximately 2 hours until the

unit has reached room temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the environment.

Do not dispose of the battery in the general

household trash. Do not expose the battery to

excess heat, direct sunlight, or fire. Do not short

circuit, disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or equivalent

type.

WARNING: DO NOT INGEST BATTERY.

CHEMICAL BURN HAZARD.

The remote control supplied with this product

contains a coin/button cell battery. If the coin/button

cell battery is swallowed, it can cause severe internal

burns in just 2 hours and can lead to death. Keep

new and used batteries away from children. If the

battery compartment does not close securely, stop

using the remote and make sure to keep it away from

children. If you think the battery might have been

swallowed or placed inside any part of the body, seek

immediate medical attention.

· 3 · English

CHECKING THE COMPONENTS

Top

Right Side of the Soundbar

Soundbar Main Unit

3 AC/DC Adapter

4 Power Cord

Remote Control / Battery Subwoofer Optical Cable

1 AC/DC Adapter

2 Power Cord

c Micro USB to USB adapter cable is sold separately.

To purchase, contact a Samsung Service Center or Samsung Customer Care.

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3, 4) to connect the power supplies in the following order:

Subwoofer  Soundbar Main Unit

c For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of the Soundbar Main Unit)

DC 24V

(Power Jack)

DC 19V

(Power Jack)

Rear of Subwoofer Bottom of the Soundbar Main Unit

DC 24V

2 Power Cord

1 AC/DC

Adapter

3 AC/DC

Adapter

Connecting

electrical power

Connecting

electrical power

4 Power Cord

c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is

hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter

and cause the Adapter to malfunction.

· 4 · English

CONNECTING THE SUBWOOFER TO THE SOUNDBAR

MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

Soundbar Main Unit

Subwoofer

The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main

unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the rear of the

subwoofer stops blinking and glows blue continuously. The subwoofer's LED indicator modes are listed below:

blue

Auto-connection is complete.

blue

blinking

Auto-connection is not complete.

blue is

not lit

a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.

b. If the power cord is plugged in correctly, check the Soundbar main unit.

If your Soundbar main unit is off (in standby mode), the subwoofer will also be in

standby mode and the blue LED won't be lit.

c If the indicator on the rear of the subwoofer does not glow continuously in blue, the subwoofer has not

connected. If this occurs, follow the directions below to connect the subwoofer manually.

c Important: Before you begin, put the battery into the remote. See page 13 for instructions.

· 5 · English

Link indicator

1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.

c The LINK indicator (Blue LED) on the subwoofer blinks quickly.

3. Press the

button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.

4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then

disappears.

ID SET

5. While the subwoofer's indicator is flashing blue, press the button on your remote control or on the right

side of the Soundbar to turn on the Soundbar main unit.

6. The connection is complete if the indicator on the rear of the subwoofer stops flashing and glows

continuously.

c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.

Expand to true wireless surround sound by connecting the Samsung Wireless Rear

Speaker Kit (SWA-8000S) to your Soundbar. (Sold separately)

c For further information, refer to the Web Manual.

· 6 · English

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

c Important: Before you begin, put the battery into the remote. See page 13 for instructions.

Method 1. Connecting with a Cable

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 24V

OPTICAL OUT

DIGITAL AUDIO IN

(OPTICAL)

Optical Cable

Bottom of the Soundbar

Check the DIGITAL AUDIO IN (OPTICAL)

port of the Soundbar main unit.

Check the OPTICAL OUT

port of your TV.

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with

a digital optical cable.

2. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select the D.IN mode.

D.IN

c If TV sound is not output, press the button on the right side of your Soundbar or the SOURCE button

on the remote control to select the D.IN mode on Soundbar main unit display.

c Press the  button on the remote control for 5 seconds to turn Auto Power Link on or off.

(Auto Power Link is set to ON by default.)

· 7 · English

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)

1. Turn on your Samsung TV and the Soundbar.

2. Select TV mode in your Soundbar's display by pressing the

button on the right side of the Soundbar or

the SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX →

BT → TV → USB.)

3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote

control.

Samsung Audio Device detected.

Do you want to hear TV sound

through this device?

Yes

Select <Yes> with your TV remote control.

4. The Soundbar outputs TV sound.

c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select

Add New Device, and set Add New Device to ON. Then, try again.

c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the

volume with the Soundbar's remote or the TV's remote. You can also have the Soundbar turn on and off

automatically when you turn the TV on or off by setting the Bluetooth POWER On function to On.

See page 14.

c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since

2012.

c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,

press the & button on your remote control for more than 5 seconds.

c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

c Do not place electronic devices or metallic objects on top of the product.

e.g., Wired/wireless router, set-top box, or modem.

c Placing the product on the floor may degrade wireless network performance, depending on the floor material.

· 8 · English

CONNECTION VIA BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!

c It is not possible to connect multiple Bluetooth devices at the same time.

Connect

Bluetooth device

1. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select BT.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's

user manual.)

3. Select "[AV] Samsung Soundbar Kxxx K-Series" from the list.

• When the connection is established between the Soundbar and Bluetooth device, the front display

window of the Soundbar displays [Bluetooth device name] → BT.

4. Play music on the connected device.

[If failed to connect to the Bluetooth device / If device searching is needed again]

• Delete the previous "[AV] Samsung Soundbar Kxxx K-Series" found by the Bluetooth device and have it

search for the Soundbar again.

c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 32.8 ft.

c The Soundbar automatically turns off after 5 minutes in the Ready state.

c The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

If there is a strong electrical field around the Soundbar.

If several Bluetooth devices are simultaneously paired with the Soundbar.

If the Bluetooth device is turned off, not in place, or malfunctions.

c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be

kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the Bluetooth device

Press the SOURCE button on the remote control or the button on the product's

rig

ht side to switch from

BT to another mode or turn off the Soundbar.

• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

· 9 · English

CONNECTING TO AN EXTERNAL DEVICE

Optical Cable

You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by

connecting them to your Soundbar.

DIGITAL AUDIO IN

(OPTICAL)

Soundbar

Bottom of Soundbar

External Device

OPTICAL OUT

Optical Cable

1. Connect an Optical Cable as shown in the illustration above.

2. Press the

button on the right side of your Soundbar or the SOURCE button on your remote control to

select D.IN mode.

3. The Soundbar shows D.IN on its display and outputs sound from the external device.

USB

You can play music files located on USB storage devices through the Soundbar.

Display

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 24V

USB (5V 0.5A)

Micro USB to

USB adapter Cable

(not supplied)

USB port

1. Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a

standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.

c The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Center or

Samsung Customer Care.

2. Connect your USB device to the female end of the adapter cable.

3. Press the

button on the Soundbar main unit’s right side or the SOURCE button on the remote control to

select the USB mode.

4. USB appears on the display screen.

●

The Soundbar connection to the USB device is complete.

●

The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more

than 5 minutes.

· 10 · English

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's

system firmware in the future.

DIGITAL AUDIO IN

(OPTICAL)

USB (5V 0.5A)

AUX IN

DC 24V

24V

USB (5V 0.5A)

Micro USB to

USB adapter Cable

(not supplied)

If an update is offered, you can update the firmware

by connecting a USB device with the firmware update

stored on it to the USB port on your Soundbar.

For more information about how to download update

files, go to the Samsung Electronics website at

(samsung.com/sec)  search for the model name 

download the firmware from the customer support

menu option. The option name can vary.

INSTALLING THE WALL

MOUNT

You can use the wall mount bracket to mount this unit

on a wall.

I nstallation Precautions

• Install on a vertical wall only.

• Do not install the Soundbar system in a location

with high temperature and/or humidity. Install the

system on a stable wall that can bear the weight of

the Soundbar main unit.

• Check the strength of the wall. To install the

Soundbar system on a wall that may not bear the

Soundbar main unit weight, reinforce the wall

before installation. If this is not possible, install the

system on another wall, one stable enough to bear

the weight of the Soundbar main unit.

• Purchase and use the fixing screws or anchors

appropriate for the kind of wall you have (plaster

board, iron board, wood, etc.). If possible, fix the

support screws into wall studs.

• Purchase wall mounting screws according to the

type and thickness of the wall you will mount the

Soundbar on.

- Diameter: M5

- Length: 1 3/8 inches or longer recommended.

• Connect cables from the unit to external devices

before you install it on the wall.

• Make sure the unit is turned off and unplugged

before you install it. Otherwise, it may cause an

electric shock.

Wallmount Components

(Wall Mount L) (Wall Mount R)

Bracket-Wall Mount (2 EA)

Holder-Screw (2 EA) Screw (2 EA)

A-TYPE : 616mm

B-TYPE : 360mm

CENTER LINE

A B B A

Wall Mount Guide

· 11 · English

1. Place the Wall Mount Guide against the wall

surface.

●

The Wall Mount Guide must be level.

●

If your TV is mounted on the wall, install the

Soundbar at least 2 inches (5 cm) below the

TV.

2 inches or more

2. Align the Paper Template's Center Line with the

center of your TV (if you are mounting the

Soundbar below your TV), and then fix the Wall

Mount Guide to the wall using tape.

c If you are not mounting below a TV, place the

Center Line in the center of the installation area.

Center Line

A-TYPE : 616mm

B-TYPE : 360mm

CENTER LINE

A B B A

3. Push a pen tip or sharpened pencil tip through the

center of the B-TYPE images on each end of the

Guide to mark the holes for the supporting

screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in

the wall at each marking.

c If the markings do not correspond to the

positions of studs, make sure you insert

appropriate anchors or mollies into the holes

before you insert the support screws. If you use

anchors or mollies, make sure the holes you drill

are large enough for the anchors or mollies you

use.

5. Push a screw (not supplied) through each

Holder-Screw, and then screw each screw

firmly into a support screw hole.

6. Use the two Screws (M4 x L12) to attach both

Bracket-Wall Mount L and R to the Soundbar's

bottom. For a proper fit, make sure to align the

bumps on the Soundbar to the holes on the

brackets.

· 12 · English

●

When assembling, make sure the hanger part

of the Bracket-Wall Mounts faces

backwards.

Rear Side of Soundbar

Right end of Soundbar

●

The left and right mounts are different shapes.

Make sure to position them correctly.

Wall Mount LWall Mount R

7. Install the Soundbar with the attached Bracket-

Wall Mounts by hanging the Bracket-Wall

Mounts on the Holder-Screws on the wall.

●

Slightly tilt the Soundbar to insert both

Holder-Screw heads into Bracket-Wall

Mount holes. Push the Soundbar in the

direction of the arrow to make sure both sides

are firmly fixed.

D ETACHING THE SOUNDBAR

FROM THE WALL

1. To separate the Soundbar from the wall, push it in

the direction of the arrow, lift up the left side

slightly, and then pull it away from the wall as

shown.

c Do not hang onto the installed unit and avoid

striking or dropping the unit.

c Secure the unit firmly to the wall so that it does

not fall off. If the unit falls off, it may cause an

injury or damage the product.

c When the unit is installed on a wall, please make

sure that children do not pull any of the

connecting cables, as this may cause it to fall.

c For the optimal performance of a wall mount

installation, install the speaker system at least

2 inches (5 cm) below the TV if the TV is mounted

on the wall.

c For your safety, if you do not mount the unit on

the wall, install it on a secure, flat surface where it

is unlikely to fall.

· 13 · English

REMOTE CONTROL BUTTONS & FEATURES

Inserting Battery before using the Remote Control

1. Use a suitable coin to turn the remote control's battery cover

counterclockwise to remove it as shown in the figure below.

2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when

inserting the battery. Put the battery cover on, and then align the '●'

marks side by side as shown in the figure below.

3. Use a suitable coin to turn the remote control battery cover clockwise

as far as it will go to fix it in place.

 

Controlling the Soundbar using Your TV Remote

Control

1. Press and hold the SOUND button for more than 5 seconds while

the Soundbar is turned on.

2. "ON - TV REMOTE" appears on the Soundbar's display.

3. In the TV's menu, set the TV speaker to external speaker.

c Only the VOL +/- and

buttons are available to control the

Soundbar.

c TV menus differ by manufacturer and model. Refer to the TV's user

manual for further information.

c This function is not available when the Soundbar is in the

TV SoundConnect mode.

c Manufacturers supporting this function:

●

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,

GRUNDIG, Hisense, RCA

●

This function may not be compatible with your TV's remote

depending on the remote control's manufacturer.

c To turn off this function, press the SOUND button for 5 seconds.

"OFF - TV REMOTE" appears on the Soundbar's display.

󰟵

󰟴

󰟳

󰟹

󰟺

󰟷

󰟶

󰟸

󰟻

󰟳

Power

Turns the Soundbar on and off.

󰟴

SOURCE

Press to select a source connected to the Soundbar.

· 14 · English

󰟵

Mute

Sets the volume temporarily to 0. Press again to cancel.

󰟶

Volume

Adjusts the volume level of the unit.

󰟷

Play / Pause

Press the

button to pause a music temporarily.

Press the

button again to play the selected music.

Skip Forward

Selects the next file.

Skip Back

Selects the previous file.

Repeat

Press to set the Repeat function during music playback from a USB device.

• OFF-REPEAT : Cancels Repeat Playback.

• TRACK-REPEAT : Plays a track repeatedly.

• ALL-REPEAT : Plays all tracks repeatedly.

• RANDOM-REPEAT : Plays tracks in random order.

󰟸

Surround Sound

The Surround Sound function adds depth and a sense of space to sound.

Each time you press this button, Surround Sound ON and OFF alternates.

󰟹

Bluetooth POWER

Press to turn the Bluetooth POWER On function on and off.

When the Bluetooth POWER On function is on, ON - BLUETOOTH POWER

appears in the Soundbar’s display.

󰟺

SOUND EFFECT

You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,

MOVIE, and NIGHT.

c NIGHT Mode

When changing a channel or music source, the volume difference between different

music input sources is automatically adjusted to be suitable for listening.

󰟻

SOUND CONTROL

You can select TREBLE, BASS, SUBWOOFER LEVEL

AUDIO SYNC.

• Press to select TREBLE, BASS,

SUBWOOFER LEVEL or AUDIO SYNC.

Then, use the ,  buttons to adjust the

TREBLE

BASS

volume from -6 ~ +6,

SUBWOOFER LEVEL volume from -12, -6 ~ +6.

• If the video of your TV and the audio of your Soundbar are not synchronized,

select AUDIO SYNC in Sound Settings, and then set audio delay between

0~300 milliseconds by using the ,  buttons.

· 15 · English

TROUBLESHOOTING

Before seeking assistance, check the following.

The unit will not turn on.

Is the power cord plugged into the outlet?

 Connect the power plug to the outlet.

A function does not work when the button is

pressed.

Is there static electricity in the air?

 Disconnect the power plug and connect it again.

Sound is not produced.

Is the Mute function on?



Press the (Mute) button to cancel the function.

Is the volume set to minimum?

 Adjust the Volume.

The remote control does not work.

Is the battery drained?

 Replace with new battery.

Is the distance between the remote control and

Soundbar main unit too far?

 Move the remote control closer to the Soundbar

main unit.

The TV SoundConnect (TV pairing) failed.

Does your TV support TV SoundConnect?

 TV SoundConnect is supported by some

Samsung TVs released from 2012 on. Check

your TV to see if it supports TV SoundConnect.

Is your TV firmware the latest version?

 Update your TV with the latest firmware.

Does an error occur when connecting?

 Contact the Samsung Call Center.

 Reset TV SoundConnect and connect again.

To reset the TV SoundConnect connection,

press and hold the p button for 5 seconds.

The blue indicator on the rear of the subwoofer

is not lit and the subwoofer is not producing

sound.

Is the Soundbar main unit power on?

 Check the power cord. If the power cord is

plugged in correctly, check the Soundbar main

unit. If your main unit is off (in standby mode),

the subwoofer will also be in standby mode and

the blue LED won't be lit.

Your subwoofer may not be connected to the

Soundbar main unit.

 Try to connect your subwoofer again.

See page 4.

LICENSE

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Audio and the double-D

symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS Licensing

Limited. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS 2.0

· 16 · English

OPEN SOURCE LICENSE NOTICE

To send inquiries and requests regarding open sources, contact Samsung via Email ([email protected]).

IMPORTANT NOTE ABOUT SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance.

SPECIFICATIONS

GENERAL

USB

5V / 0.5A

Weight

Soundbar Main Unit

4.4 lbs (2.0 kg)

Subwoofer (PS-WK430)

6.4 lbs (2.9 kg)

Dimensions

(W x H x D)

Soundbar Main Unit

35.8 x 2.1 x 2.8 inches

(908.5 x 53.5 x 70.5 mm)

Subwoofer (PS-WK430)

6.1 x 11.8 x 11.5 inches

(155.0 x 300.0 x 293.0 mm)

Operating Temperature Range

+41°F to +95°F (+5°C to +35°C)

Operating Humidity Range

10 % to 75 %

AMPLIFIER

Rated Output

Power

Soundbar Main Unit

40W x 4, 6 ohm, THD≦10%

Subwoofer (PS-WK430)

60W, 3 ohm, THD≦10%

• Nominal specification

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

Weight and dimensions are approximate.

For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of the Soundbar Main Unit)

LIMITED WARRANTY TO ORIGINAL PURCHASER

Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective

material and workmanship.

SECA further warrants that if this product falls to operate properly within the specifi ed

warranty period and the failure is due to improper workmanship or defective materials,

SECA will repair or replace the product at its option.

All warranty repairs must be performed by a SECA Authorized Service Center. (The name and

address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)

LABOR

One year (Carry- in)

PARTS

One year

On carry-in models, transportation to and from the service center is the customer’s

responsibility.

The original dated sales receipt must be retained by the customer and is the only acceptable

proof of purchase. It must be presented to the authorized service center at the time service

is requested.

EXCLUSIONS (WHAT IS NOT COVERED)

This warranty does not cover damage due to accident, fi re, fl ood and/ or other acts of

God; misuse,incorrect line voltage, improper installation, improper or unauthorized repairs,

commercial use or damage that occurs in shipping. Exterior and interior fi nish, lamps, glass

are not covered under this warranty. Customer adjustments which are explained in the

instruction manual are not covered under the terms of this warranty. This warranty will

automatically be voided for any unit found with a missing or altered serial number. This

warranty is valid only on products purchased and used in Canada.

Samsung Electronics Canada Inc

2050 Derry Rd West

Mississauga, On. L5N 0B9

Tel: 1-800-SAMSUNG (726-7864)

Fax: (905) 542- 1199

Website: www.samsung.com/ca

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer

care Center.

HEADQUARTERS

Samsung Electronics Canada Inc. 2050 Derry Road

West, Mississauga, Ontario L5N 0B9 Canada

TEL: 1-800-SAMSUNG (1-800-726-7864)

www.samsung.com/ca/support

Country Contact Center



Web Site

North America

CANADA 1-800-SAMSUNG (726-7864)

www.samsung.com/ca/support (English)

www.samsung.com/ca_fr/support (French)

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support

Pour de plus amples renseignements, consultez le guide de l’utilisateur en ligne.

Guide Web : www.Samsung.com Assistance

Recherche du nom de produit HW-K430

HW-K430

Guide d'utilisation

* La conception et les spécifications sont susceptibles d'être modifiées sans préavis.

La page est en cours de chargement...

Samsung HW-K430 Guide de démarrage rapide

Marque: Samsung

Modèle: HW-K430

Catégorie: Cheminées

Taper: Guide de démarrage rapide

Télécharger le PDF

rapport

dans d''autres langues

English: Samsung HW-K430 Quick start guide

Samsung HW-K430 Guide de démarrage rapide

Samsung HW-K430 Guide de démarrage rapide

dans d''autres langues

Documents connexes

Autres documents