RCA 1627195C Manuel utilisateur

TV/DVD

User's Guide

Changing Entertainment. Again.

1627195C_cover 7/15/04, 4:38 PM1

This symbol indicates "dangerous voltage" inside the

product that presents a risk of electric shock or personal

injury.

WARNING

To reduce the risk of fire or electric shock, do not

expose this product to rain or moisture.

The apparatus shall not be exposed to dripping

or splashing and that no objects filled with

liquids, such as vases, shall be placed on the

apparatus.

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside.

Refer servicing to qualified service personnel.

This symbol indicates important

instructions accompanying the

product.

CAUTION

RISK OF ELECTRIC SHOCK DO

NOT OPEN

Refer to the identification/rating label located on the back

panel of your product for its proper operating voltage.

FCC Regulations state that unauthorized changes or

modifications to this equipment may void the user’s

authority to operate it.

Caution: Using video games or any external accessory

with fixed images for extended periods of time can

cause them to be permanently imprinted on the picture

tube (or projection TV picture tubes). ALSO, some

network/program logos, phone numbers, etc. may cause

similar damage. This damage is not covered by your

warranty.

Cable TV Installer: This reminder is provided to call your

attention to Article 820-40 of the National Electrical Code

(Section 54 of the Canadian Electrical Code, Part 1) which

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building as close to the point of

cable entry as practical.

Important Information

Product Registration

Please fill out the product registration card (packed separately) and return it

immediately. For U.S. customers: Your RCA Consumer Electronics product

may also be registered at www.rca.com/productregistration. Registering this

product allows us to contact you if needed.

This symbol indicates that this product incorporates double

insulation between hazardous mains voltage and user accessible

parts. When servicing use only identical replacement parts.

CAUTION

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE. DO NOT

OPEN COVERS AND DO NOT REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

Notes:

This DVD player is designed and manufactured to respond to the Region Management Information. If the

Region number of a DVD disc does not correspond to the Region number of this DVD player, this DVD player

cannot play the disc. The Region number for this DVD player is Region No 1.

This device is protected by U.S. patent numbers 4,631,603 and 4,577,216 and 4,819,098 and other

intellectual property rights. The use of Macrovision’s copy protection technology in the device must be

authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless

otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.

CLASS 1

LASER

PRODUCT

Product Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record

the serial and model numbers. These numbers are located on the product.

Model No. ____________________ Serial No. __________________Purchase Date: ____________________

Dealer/Address/Phone: ______________________________________________________________________

1627195C_cover 7/15/04, 4:38 PM2

Explanation of Jacks and Cables ........ 2

Video Jacks and Cables ....................................... 2

Audio Jacks and Cables ....................................... 2

Top Panel Controls ............................... 3

The Buttons On the Remote control .. 4

TV Function Buttons ............................................ 4

DVD Function Buttons......................................... 5

Putting Batteries in the Remote......... 5

TV Menus .............................................. 6

TV Menu Navigation ............................................ 6

The PICTURE menu ............................................... 6

The SOUND menu ................................................. 7

The TIMER menu ................................................... 7

The FUNCTION menu ...........................................7

The PARENTAL CONTROL menu

and V-CHIP ..................................... 8

Blocking TV Ratings .......................................... 10

Blocking Specific Content Themes ................ 11

V-Chip Movie Rating Limit ............................. 12

Parental Guide On (Activate V-Chip) ........... 13

Child Lock ............................................................ 13

Change Password ............................................... 13

DVD Basics ..........................................14

Regional Coding ................................................. 14

Using Different Menus ..................................... 14

Types of Discs Your DVD Will Play ................ 14

Search Options ...................................15

Picture Scan ........................................................ 15

Skip ........................................................................ 15

Playback Options ................................ 15

Chapter Advance................................................ 15

Repeat ................................................................... 15

Zoom ..................................................................... 15

DVD Menu System .............................16

DVD Menu Navigation .......................16

Setup Menus ....................................... 16

The Language Setup Menu ............................. 16

OSD ........................................................................ 16

Menu ..................................................................... 17

Audio ..................................................................... 17

Subtitle ................................................................. 17

The Screen Setup Menu ....................18

TV Type.................................................................. 18

Screen Saver........................................................ 19

Brightness ............................................................ 19

Contrast ................................................................ 19

The Audio Setup Menu ......................20

(not available on model 13R400TD)

The Custom Setup Menu ...................20

Parental Ctrl ........................................................ 20

Password .............................................................. 20

Defaults ................................................................ 20

Playing Audio CDs .............................. 21

Scan Disc .............................................................. 21

Track Advance or Reverse................................ 21

Pause ..................................................................... 21

Playing mp3 Discs .............................. 21

Playing Picture CDs ............................22

Playing CD-ROM files (JPEG

or mp3) .........................................22

Troubleshooting ..................................23

Recommendations and information

concerning discs ...........................26

Additional Information ......................27

Maintenance of Cabinet .................................. 27

Formation of Condensation ............................ 27

Limited Warranty ...............................28

Table of Contents

Table of Contents 1

1627195C_13R400TD 7/15/04, 4:38 PM1

Connections and Setup

2 Connections and Setup

T

V

(

b

a

ck

p

a

n

e

l

)

A

N

T

E

NN

A

I

N

I

N

P

U

T

V

I

D

E

O

L

(

M

O

N

O

)

R

H

E

A

D

P

H

O

N

E

V

I

D

E

O

A

UD

I

O

T

V

(

s

i

d

e

p

a

n

e

l

)

Explanation of Jacks and Cables

You can connect other components to your TV/DVD player such as a VCD, video camera or audio receiver. There

are several ways to connect your other components to your TV/DVD player depending upon the cables you

have and the jacks that are on the back of the components. Different jacks and cables provide a different level

of performance. The jacks on the back of your TV/DVD Player and the cables used to connect them are

explained below.

Note: If you do not connect a cable, antenna, or another component to your TV, the TV will automatically

shut off after 15 minutes to save power.

VIDEO Jacks and Cables

The basic Video jack (usually color-coded yellow) is also referred to as

composite video. Composite video is better than the video quality you get

from an RF coaxial cable (the type used to plug the cable feed into a TV).

Usually the video cable is bundled with the audio cables (white and red).

V

I

D

E

O

L

(

M

O

N

O

)

R

AUDIO L (left) and R (right) Jacks and Cables

These jacks send the audio from other components to the TV. The audio

jacks and cables are often color-coded (red for right audio, and white for

left audio). You must connect audio cables to the AUDIO L and R jacks on

the TV/DVD Player and the corresponding Audio Input Jacks on the

component no matter which Video jack you connect (VID1, DVD, FRONT).

Note: If your component has only one input for audio (mono), connect it to the

left (white L/Mono) audio jack on the TV and don’t connect the right audio part

of the cable.

1627195C_13R400TD 7/15/04, 4:38 PM2

Connections and Setup

Connections and Setup 3

Top Panel Controls

If you cannot locate your remote, you can use the top panel buttons of your TV to operate many of the TV/

DVD’s features.

INPUT Toggles the Video Input Channels from TV, VID1, DVD, FRONT.

VOL- Decreases the volume. In the menu system, acts like the left arrow button on the remote control and

adjusts menu controls.

VOL+ Increases the volume. In the menu system, acts like the right arrow button on the remote control and

adjusts menu controls.

CH- Scans down through the current channel list. In the menu system, acts like the down arrow button on

the remote control and adjusts menu controls.

CH+ Scans up through the channel list. In the menu system, acts like the up arrow button on the remote

control and adjusts menu controls.

POWER Turns the TV/DVD on and off.

Play/Pause Plays/pauses disc playback.

Stop Stops disc playback.

Open/Close Opens and closes the disc tray.

1627195C_13R400TD 7/15/04, 4:38 PM3

4 The Remote Control

The Remote Control

The Buttons On the Remote control

TV Function Buttons

TV Puts the remote in TV mode. When the TV is off, press to turn on the

TV.

Mute Lowers the volume to the minimum level. Press again to restore

volume.

ON•OFF Turns the TV on and off.

VOL (

+

/

-

) buttons Decreases or increases the volume.

CH (

+

/

-

) buttons Scans up or down through the current channel list.

Press once to change the channel; press and hold to continue changing

channels.

Go Back Returns to the previous channel. If you are in the menu

system, GO BACK takes you to the previous menu screen.

CLEAR Removes a menu or display from the screen and returns you to

TV viewing. For menus with digit inputs, pressing CLEAR will clear the

last number entered.

MENU Displays the Picture menu.

Arrow buttons (

/

/ / ) Press the arrow buttons to navigate

through the on-screen menu system.

OK button When a menu is on screen, press OK to toggle the item

that is highlighted on or off.

PRESETS Brings up picture presets.

SKIP Press the button twice to begin channel scan. Press again to select

the current channel.

CC Turns closed captioning on and off.

INFO Displays channel information. Press again to remove the

information from the screen.

0-9 (Number buttons) Use the number buttons to enter channel

numbers. To enter a two-digit channel, press the two digits. To enter a

three-digit channel, press and hold the first digit for two seconds until

two dashes appear to the right of the number, then add the second two.

Example: to tune a channel 123, press and hold 1 for two seconds, press

2, then press 3.

INPUT Toggles between available inputs.

DVD

ON OFF

VCR TV

VOL

MUTE GO BACK

CH

CLEAR

MENU

PRESETS

CC

GUIDE

INFO

SKIP

123

4

56

7

89

0

INPUT

ANTENNA

REVERSE

PLAY

FORWARD

RECORD

STOP

PAUSE

AGAIN

ZOOM

OPEN CLOSE

SPEED

SEARCH

OKOK

1627195C_13R400TD 7/15/04, 4:38 PM4

The Remote Control 5

The Remote Control

DVD Function Buttons

DVD Puts the remote in DVD mode.

CH+/CH- ( , ) advances to the next chapter or track.

reverses to the preceding chapter or track.

MENU Displays menus and other options that are available on the

current disc (if the disc contains this information).

Arrow buttons (

/

/ / ) Press the arrow buttons to move through

the on-screen menu system.

OK button When a menu is on the screen, press OK to select the item

that is highlighted on or off.

GUIDE When the DVD player is not playing a disc, displays the DVD

player setup menu.

INFO Displays the title, chapter and time information. Press again to

remove information from the screen.

SKIP Advances the title, chapter, or time counter to a specific location

on a DVD. See page 15 for more information.

0-9 (Number buttons) Use to input information such as chapter

numbers, and track numbers.

FORWARD Searches forward through a disc while it is in play mode.

Press repeatedly to increase speed.

PLAY Begins disc play (and closes disc tray if it is open).

PAUSE Pauses disc play. When disc play is paused, press PLAY or PAUSE

to resume playback.

REVERSE Searches backward through a disc while it is in play mode.

Press repeatedly to increase speed.

STOP Stops disc play.

AGAIN Press to repeat a chapter or title on DVDs, or a track or disc for

audio CDs.

ZOOM Zooms in on the picture when playing DVD discs.

OPEN/CLOSE Press this button to open/close the DVD drawer.

DVD

ON OFF

VCR TV

VOL

MUTE GO BACK

CH

CLEAR

MENU

PRESETS

CC

GUIDE

INFO

SKIP

123

4

56

7

89

0

INPUT

ANTENNA

REVERSE

PLAY

FORWARD

RECORD

STOP

PAUSE

AGAIN

ZOOM

OPEN CLOSE

SPEED

SEARCH

OKOK

Putting Batteries in the Remote

Remove the cover of the battery compartment. Insert two AAA batteries, with the polarities as indicated,

inside the compartment. Replace the cover.

Note: If you are not going to use the remote for a long period of time, remove the batteries to avoid damage

due to leakage.

1627195C_13R400TD 7/15/04, 4:38 PM5

6 Using TV Menus

Using TV Menus

PICTURE

CONTRAST 1

BRIGHTNESS 18

COLOR 50

SHARPNESS 50

TINT 0

COMBFILTER ON

COLOR TEMP NORMAL

The PICTURE Menu

The PICTURE menu allows you make adjustments to your picture

settings.

CONTRAST Use the

/

arrow buttons to adjust the

contrast between the light and dark areas

of the picture.

BRIGHTNESS Use the

/

arrow buttons to adjust the

brightness of the picture.

COLOR Use the

/

arrow buttons to adjust the

color intensity or saturation.

SHARPNESS Use the

/

arrow buttons to adjust the

sharpness of the picture.

TINT Use the

/

arrow buttons to adjust the

balance between the red and green levels.

COMBFILTER Turns the comb filter on or off.

COLOR TEMP Provides three color adjustments: Cold for

more blue in the picture, Normal, and

Warm for more red in the picture.

TV Menus

TV Menus let you control picture quality and features available for TV viewing. There is a different menu

system for DVD features, described on page 16.

TV Menu Navigation

1. To bring up the TV menu, press the MENU button.

2. Use the arrow buttons (

/

) on the remote (or the VOL

+

/

-

buttons on the top of TV) to highlight a

submenu icon at the top of the menu.

3. Press the

/ buttons on the remote (or CH

+

/

-

on the top of TV) to select the option.

4. Use the arrow buttons (

/

) on the remote (or the VOL

+

/

-

buttons on the top of TV) to change the

setting.

5. Press the MENU button on the remote to exit the menu system.

Note: Make sure that the remote control is in the TV mode.

1627195C_13R400TD 7/15/04, 4:38 PM6

Using TV Menus 7

Using TV Menus

The SOUND menu

The SOUND menu offers different audio options.

PRESET Provides four preset audio settings

(USER /SPEECH/THEATER/MUSIC).

BASS Use the

/

arrow buttons to decease/increase

low-pitched sound.

TREBLE Use the

/

arrow buttons to decease/increase

high-pitched sound.

BALANCE Use the

/

arrow buttons to adjust left/right

speaker balance.

SURROUND Turns the surround sound on or off.

SOUND

BASS 50

TREBLE 50

BALANCE 0

SURROUND OFF

PRESET USER

TIMER

SLEEP TIMER 20

The TIMER menu

SLEEP TIMER Use the

/

arrow buttons to turn the TV

automatically off after a given time. Press

the

arrow button to add 10 minutes to the

clock (up to two hours).

FUNCTION

LANGUAGE ENGLISH

BLACK STRETCH OFF

NOISE REDUCE OFF

CLOSE CAPTION CC1

CC ON MUTE ON

The FUNCTION menu

LANGUAGE Selects the language you want the menus to

be displayed in.

BLACK STRETCH Turns the black stretch function on or off.

NOISE REDUCE Turns the noise reduce function on or off .

CLOSE CAPTION Offers eight closed captioned modes,

including four text modes.

CC ON MUTE When turned on, automatically brings

up close captioning when the MUTE

button is pressed.

1627195C_13R400TD 7/15/04, 4:38 PM7

8 Using TV Menus

Using TV Menus

TUNING

SOURCE AIR

CHANNEL 18

DELETE CH NO

FINE TUNE

AUTO SEARCH

The TUNING menu

SOURCE Selects AIR or CABLE. Select AIR to receive

a broadcast signal. Select CABLE to receive

a CATV signal.

CHANNEL Use the

/

buttons on the remote ( or

the VOL

+

/

-

button on the top of the TV)

to scroll through the channels available via

your antenna. You can enter the channel

number directly using the number buttons.

DELETE CH Select YES to skip the channel above. `

Select NO to go to the channel above.

FINE TUNE Fine tunes a channel for best reception.

AUTO SEARCH Starts channel search and stores the

channels automatically.

The PARENTAL CONTROL menu and V-CHIP

The Parental Controls menu allows you to program your TV/DVD so that children cannot see certain programs

and channels.

The Parental Controls menu involve software inside your TV/DVD (V-Chip) which allows you to “block” TV

programs and movies based on violence, sex, or other content you think children should not view. It lets you

program your TV so it will not display certain programs. You can “unblock” programs by entering a password.

When Parental Controls is turned ON the software reads a code that most broadcasters send with programs.

That code tells the software the program’s age-based rating (TV-MA, TV-14, etc.) and content themes (Violence

(V), Adult Language (L), etc.).

Broadcasters are not required to provide content themes, so programs received with no content themes will

only be blocked if you block their age-based rating. You can also block out programs that have been given a

rating of “Not Rated,” and programs that are considered “unrated” because no code has been sent by the

broadcaster.

The TV age-based ratings are listed in the table on the following page.

PASSWORD You need a password to enter the PARENTAL CONTROL menu. The initial password is 5898.

The first time you use this menu you should change the password.

When you enter the correct password, the PARENTAL GUIDE menu is displayed.

PARENTAL GUIDE Select “OFF” to turn V-CHIP off. Select “ON” to activate V-CHIP.

TV RATING Select to display the TV Rating submenu.

The TV ratings and content themes you can block are listed on pages 10 and 11.

1627195C_13R400TD 7/15/04, 4:38 PM8

Using TV Menus 9

Using TV Menus

Description and Content Themes for Age-Based Ratings

Mature Audience Only. Specifically designed to be viewed by adults; may be unsuitable for

children under 17. Contains one or more of the following content themes: crude indecent

language (L), explicit sexual activity (S), or graphic violence (V).

Parents Strongly Cautioned. Contains some material that parents would find unsuitable for

children under 14. Parents are strongly urged to exercise greater care in monitoring this

program and are cautioned against letting children under the age of 14 watch unattended.

This program contains one or more of the following content themes: intensely suggestive

dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence

(V).

Parental Guidance Suggested. Contains material that parents may find unsuitable for younger

children. Parents may want to watch it with their younger children. The program contains one

or more of the following content themes: some suggestive dialogue (D), infrequent coarse

language (L), some sexual situations (S), or moderate violence (V) .

General Audience. Most parents would find this program suitable for all ages. Contains little

or no sexual dialogue (D), no strong language (L) little or no sexual situations (S), or

violence (V).

Designed for children ages 7 and above. May be more appropriate for children who have

acquired the developmental skills needed to distinguish between make-believe and reality.

Themes and elements in this program may include mild fantasy violence (FV) or comedic

violence, or may frighten children under the age of 7.

All Children. Themes and elements in this program are designed for a young audience,

including children from ages 2-6. It is not expected to frighten younger children.

Rating

TV-MA

TV-14

TV-PG

TV-G

TV-Y7

TV-Y

1627195C_13R400TD 7/15/04, 4:38 PM9

10 Using TV Menus

Using TV Menus

Blocking TV Ratings

You can automatically block all program ratings above a specified TV rating level. To block channels with

higher ratings:

1. Press MENU on the remote control (the Main menu appears).

2. Press the

button until the Parental Control icon is highlighted.

3. Press the

button on the remote (or CH-

button on the top of TV) until the bottom PASSWORD is

highlighted, then press the

button to access the password entry.

The TV Rating Limit Screen Rating Screen

Rating Field

Lets you select from a

list of age-based

ratings you can block

or unblock.

Rating Status Field

Lets you select whether the status of the age-based rating limit to the

left is Unblock or Block.

Content Themes

Lists the content

themes you can block

or unblock.

Content Status Fields

Lets you select which

content themes to view for

the selected rating, and

whether the status of the

content theme is currently

Unblock (U) or Block (B).

Rating Settings Area

Lets you see the current block/view state of age-based ratings and associated

content.

TV RATING

RATING FV D L S V

TV-Y >U

TV-Y7 U U

TV-G U

TV-PG U U U U U

UUU UU

TV-14

UU UUTV-MA

1627195C_13R400TD 7/15/04, 4:38 PM10

Using TV Menus 11

Using TV Menus

4. Enter your password using the numbers buttons on the

remote (the PARENTAL GUIDE menu appears).

5. Press the

button until TV RATING is highlighted, then

press the

button (the TV RATING screen appears).

6. Use the

button to select the rating, then press

the

button to change the status of a TV program rating

or content theme from U (Unblock) to B (Block).

7. Press the OK button to return the PARENTAL CONTROLS

menu.

8. Make sure PARENTAL GUIDE is on. Press the

button to

highlight PARENTAL GUIDE OFF, then press the

button to

turn it on. It must be on for rating limits to take effect.

The following sections give you more details about how to

change the status of TV program limits.

Note: If you forget your password, you can reset it. Enter 5898 as the

password and then change it to a new one.

Blocking Specific Content Themes

You can block programs based on their content. (Content is

represented by the FV, D, L, S, and V on your screen.) When you

block a content theme for a particular rating, you automatically

block that content theme for higher rated programs as well.

To block program content:

1. Determine the content themes you want to block.

2. Press and hold the

button until the content theme you

want to change is highlighted.

3. Press the

button to change its status to B (Block).

4. Press OK to return to the previous menu.

Notes: Broadcasters are not required to provide content themes or

age-based ratings.

You must remember to activate Parental Controls for rating limits to

take effect.

PASSWORD

Content Themes

D Sexually Explicit Dialogue

L Adult Language

S Sexual Situations

VViolence

FV Fantasy Violence

1627195C_13R400TD 7/15/04, 4:38 PM11

12 Using TV Menus

Using TV Menus

V-Chip Movie Rating Limit

Set movie rating limits by blocking movies rated above a

specified level.

To access the MPAA RATING (Movie Rating Limit) menu:

1. Press MENU on the remote control (the Main menu appears).

2. Press the

button until the Parental Control icon is

highlighted.

3. Press the

button until the bottom PASSWORD is

highlighted, then press the

button to access the

password entry.

4. Enter your password using the numbers buttons on the

remote (the PARENTAL GUIDE menu appears).

5. Press the

button until MPAA RATING is highlighted, then

press the

button (the MPAA RATING screen appears).

6. Use the

button to select the rating, then press the

button to change the status of a TV program rating or

content theme from U (Unblock) to B (Block).

7. Make sure PARENTAL GUIDE is on. Press the GO BACK button

to return the PARENTAL CONTROLS menu.

8. Press the

button to highlight PARENTAL GUIDE OFF, then

press the

button to turn it on. It must be on for rating

limits to take effect.

Note: If you forget your password, you can reset it. Enter 5898 as the

password and then change it to a new one.

You must remember to activate Parental Controls for rating limits to

take effect.

MPAA RATING

G B

PG B

PG-13 B

R B

NC-17 B

X B

1627195C_13R400TD 7/15/04, 4:38 PM12

Using TV Menus 13

Using TV Menus

Parental Guide On (Activate V-Chip)

Selecting this option lets you activate and deactivate parental control settings.

1. Press MENU on the remote control (the Main menu appears).

2. Press the

button until the Parental Control icon is highlighted.

3. Press the

button until the bottom PASSWORD is highlighted.

4. Enter your password using the numbers buttons on the remote (the PARENTAL GUIDE menu appears).

5. Press the

button to highlight PARENTAL GUIDE OFF, then press the button to turn it on. It must be on

for rating limits to take effect.

If you do not activate V-Chip, none of the settings for V-Chip will take effect.

If you forget your password, you can reset it. Enter 5898 as the password and then change it to a new one.

Child Lock

Selecting this option lets you lock (disable) or unlock (enable) the TV’s front panel. The remote still tunes to

any channel. When using this as a Parental Control method, remove access to any remote that is capable of

operating the television.

1. Press MENU on the remote control (the Main menu appears).

2. Press the

button until the Parental Control icon is highlighted.

3. Press the

button until the bottom PASSWORD is highlighted.

4. Enter your password using the numbers buttons on the remote (the PARENTAL GUIDE menu appears).

5. Press the

button to highlight CHILD LOCK, then press the button to turn it on.

Change Password

Selecting this option lets you simply create a new password at any time. Once you enter a new password from

CHANGE PASSWORD in the PARENTAL CONTROL menu, it is the password you use until you change it again.

1. Press MENU on the remote control (the Main menu appears).

2. Press the

button until the Parental Control icon is highlighted.

3. Press the

button until the bottom PASSWORD is highlighted.

4. Enter your password using the numbers buttons on the remote (the PARENTAL GUIDE menu appears).

5. Press the

button to highlight CHANGE PASSWORD, then press the button to select it.

6. Press the

button to highlight NEW PASSWORD, and use the number buttons on the remote to enter the

new password. Enter it again in the confirm field to confirm the new password.

1627195C_13R400TD 7/15/04, 4:38 PM13

Playing Discs

14 Playing Discs

DVD Basics

Regional Coding

The DVD player and the discs are coded by region. These regional codes must match in order for the disc to

play. This unit’s code is region 1. Discs with other regional codes can’t be played in this unit.

Using Different Menus

Each disc is programmed with different features. There are two separate menu systems that you can use to access

DVD features: the disc’s menu and the TV/DVD’s DVD menu (separate from the TV’s menu system). Remember that

a feature only works if the disc was programmed with that feature. For example, if you choose subtitles, the

subtitles only appear if the disc was created with subtitles. The DVD menu system is explained on page 16.

• The Disc menu – The disc menu is part of each disc and is separate from the DVD’s menu system. The

contents of each disc’s menu vary according to how the disc was created and what features are included.

Sometimes a disc’s menu appears automatically when you insert the disc, or you can access it by pressing

the MENU button.

Types of Discs Your DVD Will Play

• DVD discs – Contain video.

• Audio discs – Contain musical or sound content only (such as CD, CD-R, CD-RW).

• mp3 discs – Contain audio files (for example, a CD-R with downloaded mp3 files).

• Picture CDs, JPEG files.

Before you load a disc, make sure that it is compatible with the player. Note that the following discs CANNOT

be used with this player:

• Laserdisc

• CD-I, CD-ROM, DVD-ROM

• MiniDisc

• CD-G discs play audio only, not graphics

To Load and Play a Disc

1. Press the DVD button on the remote to make sure the unit is in the DVD mode.

2. Press the open/close button on the remote to open the disc tray. Place a disc gently into the tray with the

disc’s label facing up (double-sided discs have content on both sides, so you can place either side up).

3. Press the OPEN/CLOSE button again to close the disc tray.

The player reads the disc’s table of contents, and then one of following happens depending on how the disc

was programmed:

• No disc menu appears, a screen saver is displayed.

• The disc menu appears.

• The disc menu appears on the screen when you press PLAY/PAUSE.

• The disc starts playing automatically.

If no picture or screen saver is displayed, press the DVD button to put the player in DVD mode.

1627195C_13R400TD 7/15/04, 4:38 PM14

Playing Discs

Playing Discs 15

Search Options

To search a disc, you can use the FORWARD button or the REVERSE button.

You can also use the following search features with some discs:

Picture Scan

When you’re playing a disc, each time you press FORWARD or REVERSE, your DVD Player scans the disc faster

until you reach the fastest scan speed. To resume normal playback, press PLAY.

Skip

While a DVD is playing, press SKIP to advance to a title or chapter. Use the left or right arrow button to select

the title or chapter. Use the up or down arrow button to advance to the next title or chapter. Press OK once

you have selected the title or chapter.

Pressing SKIP again brings up the time counter field to allow you to go to a specific location on the DVD. Use

the number buttons to enter the time and press OK.

Note: This feature may not be available on all discs.

Playback options

With some discs you can access playback features directly from the remote control.

Chapter Advance

While a disc is playing, you can skip forward or backward a chapter or track at a time by pressing the CH+ and/

or CH- buttons.

Repeat

For DVD discs, press the AGAIN button on the remote to repeat a chapter. Press once more to repeat a title.

Press three times to cancel repeat.

For audio CDs, press the AGAIN button on the remote to repeat a track. Press AGAIN twice to repeat the entire

disc and three times to cancel repeat.

Zoom

1. While you’re playing a disc, press ZOOM (the player zooms in on the image). Each time you press ZOOM,

the picture is magnified even more (until you get to the maximum zoom level).

2. To see other parts of the picture when you’ve zoomed in on the image, try pressing the

/ / /

buttons to go in corresponding directions.

1627195C_13R400TD 7/15/04, 4:38 PM15

Playing Discs

16 Playing Discs

DVD Menu System

The DVD player menu system lets you set up features for your DVD player. There is a different menu system

that controls TV features (see page 6). The DVD setup menu is accessed when the DVD player is stopped.

DVD Menu Navigation

1. Press STOP twice to stop playback. Make sure that the remote is in the DVD mode.

2. Press the GUIDE button on the remote. The SETUP MENU is displayed.

3. Press the

/ button to highlight an item, then press the OK button to select it and move to the

submenu.

4. Use the

/

button to highlight an option and press the / button to select the option and press the

OK button.

5. To exit the menu, press the GUIDE button again.

Setup Menus

Menus are used to setup TV screen format for DVD viewing and DVD other functions.

The Language Setup Menu

OSD (on-screen display)

This setting controls the language used to display text in TV and

DVD system menus.

English

French

German

Italian

Spanish

OSD

Menu

Audio

Subtitle

Language Setup

1627195C_13R400TD 7/15/04, 4:38 PM16

Playing Discs

Playing Discs 17

Menu

Allows you to select a language to display the disc menu in

(provided the disc menu has those languages).

English

Chinese

Japanese

French

German

OSD

Menu

Audio

Subtitle

Language Setup

OSD

Menu

Audio

Subtitle

English

Chinese

Japanese

French

German

Language Setup

OSD

Menu

Audio

Subtitle

English

Chinese

Japanese

French

German

Language Setup

Audio

Some discs are recorded with multiple language tracks (different

languages). You can select a default language so discs will play in

the language of your choice, if the disc was recorded with multiple

tracks.

Subtitle

Allows you to select a language to display subtitles in (if subtitles

are turned on).

1627195C_13R400TD 7/15/04, 4:39 PM17

Playing Discs

18 Playing Discs

The Screen Setup menu

TV Type

TV TYPE controls the aspect ratio (height to width) of the picture on

the screen. See the below for a description of different screen

formats.

4:3 PS – Choose this setting if you want the movie to fill the

entire screen. This might mean that parts of the picture (the left

and right edges) won’t be seen.

Most discs produced in a widescreen format can’t be cropped in

this fashion. This means the black bars will appear at the top and

the bottom of the screen.

16:9 – Choose this setting if your TV/DVD player is

connected to a widescreen TV. If you choose this setting

and you don’t have a widescreen TV, the images on the

screen may appear distorted due to vertical

compression.

If you play a disc recorded in 4 x 3 format on a

widescreen TV, the left and right side of the screen will

appear black.

4:3 PS

4:3 LB

16:9

4:3 LB – Choose this setting if you want to see movies in their

original aspect ratio (height-to-width ratio). You’ll see the entire

frame of the movie, but it will take up a smaller portion of the

screen vertically. The movie might appear with black bars at the

top and bottom of the screen.

1627195C_13R400TD 7/15/04, 4:39 PM18

La page charge ...

RCA 1627195C Manuel utilisateur

Ce manuel convient également à

RCA 1627195C Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents