Elac Discovery Series DS-A101-G Wireless Integrated Amplifier Le manuel du propriétaire

Marque: Elac

Modèle: Discovery Series DS-A101-G Wireless Integrated Amplifier

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

DS-A101-G

80 Watt-per-channel

Integrated amp with STREAMING

INTEGRATED AMPLIFIER

OPERATING INSTRUCTIONS

• Explanation of Graphical Symbols

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOQUE ÉLECTRIQUE

N'OUVREZ PAS

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert you to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient magni-

tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

you to the presence of important operating and maintenance (servic-

ing) instructions in the literature accompanying the product.

APPLICABLE FOR USA, CANADA OR

WHERE APPROVED FOR USAGE

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE PLUG TO

WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS

ELECTRIQUES, INTRODUIRE LA LAME

LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE

ET POUSSER JUSQU AU FOND.

CAUTION: To reduce the risk of electric shock, do not remove cover (or

back).

No user-serviceable parts inside. Refer servicing to qualified service

personnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provid-

ed plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use cau-

tion when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-sup-

ply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or mois-

ture, does not operate normally, or has been dropped.

15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the appa-

ratus.

16. CAUTION: Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing

other than that contained in the operating instructions unless you are qualified to do so.

17. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

PORTABLE CART WARNING

Important Safety Instructions

Table of Contents

Important Safety Instructions ................................................................................................................................. 2

Table of Contents....................................................................................................................................................3

Introduction ............................................................................................................................................................. 4

DS-A101-G Features ...............................................................................................................................................5

Front Panel Features .................................................................................................................................................

Power......................................................................................................................................................................6

IR Sensor .................................................................................................................................................................6

Front Panel Display ................................................................................................................................................6

Source ....................................................................................................................................................................6

Phones .................................................................................................................................................................... 6

Volume Control .....................................................................................................................................................6

Rear Panel Features ...............................................................................................................................................7

AC Mains ................................................................................................................................................................ 7

Line In .....................................................................................................................................................................7

Line 2 In ..................................................................................................................................................................7

Sub Out ..................................................................................................................................................................7

Coax In ...................................................................................................................................................................7

Speaker Out ...........................................................................................................................................................7

Pair ..........................................................................................................................................................................8

Ethernet ..................................................................................................................................................................8

Optical In ...............................................................................................................................................................8

IR Remote Features.................................................................................................................................................9

Power......................................................................................................................................................................9

Volume/Transport .................................................................................................................................................9

Input Select ............................................................................................................................................................ 9

Bluetooth ................................................................................................................................................................ 9

Streaming ............................................................................................................................................................... 9

Installation .............................................................................................................................................................10

 AmplierLocation ...............................................................................................................................................10

Typical System .....................................................................................................................................................10

Connections ..........................................................................................................................................................11

Speaker Connections ......................................................................................................................................... 11

Other Connections .............................................................................................................................................11

IR Remote/Front Panel Control ............................................................................................................................ 12

ON/OFF ................................................................................................................................................................12

Volume/Mute ......................................................................................................................................................12

Source Select .......................................................................................................................................................12

Bluetooth ...............................................................................................................................................................13

 BluetoothPairingELACUSBAmplier ...............................................................................................................13

Bluetooth Pairing DS-A101-G Control ...............................................................................................................13

DS-A101-G App ....................................................................................................................................................14

Master Volume ....................................................................................................................................................14

Offset Volume......................................................................................................................................................14

Setup ....................................................................................................................................................................15

Input Names ........................................................................................................................................................15

Bass/Treble ...........................................................................................................................................................16

Screen Brightness ................................................................................................................................................16

Speaker Balance.................................................................................................................................................17

Remote Learning ................................................................................................................................................18

About ....................................................................................................................................................................19

Warranty ................................................................................................................................................................20

Introduction

CongratulationsandthankyouforpurchasingtheELACDS-A101-GIntegratedAmplier!

Sincethetimewestartedin1926,ELAChasalwaysstriventoachievetheverybest!

While a handful of separates and integrated units offered great sound, none delivered the

performance,exibilityandvalueessentialforaproducttocarrytheELACname.Sowhere

none existed before, our engineers started with a clean-sheet and simple design brief: build

themostpowerful,versatile,easy-to-useintegratedampliersimaginable;doitwithout

compromisingsound,reliabilityandagreatuserexperience;andpriceitsofairlythatit

becomes a hands-down choice even when compared against units at many times the

price.

The BASH

Amplication System

AtitsheartisabrandnewBASHTrackingAmplierdeliveringupto160Watts.Thisnew

amplierusesamodulatedswitchedmodepowersupplyalliedtoaconventionalclassAB

amplier.Switchingatmorethan400,000timespersecond,thesupplytrackstheincoming

audiosignaltoensurethattheClassABampliergetsonlythevoltagenecessary(withalittle

headroom) to cope with today’s dynamic movie and music content, thus maximizing the

efciencyandpotentialoftheamplier.

App-rich Control Flexibility

ELAC’s free iOS and Android app allows users to fully control and set up their system. The app

includes innovative features not found on any other products in this class—anywhere.

Input Rename

Easily rename each input to match your source. The revised name will appear in the app

andontheintegratedamplier’sfrontpaneldisplay.

Loudness Reinvented

Insteadoftheusualxedboostofbassandtreble,theloudnesscompensationfeature

allows users to tailor the loudness level to their liking.

Auto Blend and Auto EQ

ThroughtheuseofthefreeiOSandAndroidapptheuserrstselectsahigh-passlter,then

usingthesmartphonesmicrophone,measuresthenear-eldresponseofboththemain

speakersandsubwoofer.Ourproprietaryalgorithmthenadjuststhelowpassltertoobtain

optimal blending between the subwoofer and main speakers. Auto EQ minimizes the effects

of the rooms acoustics allowing you to hear the sound the designer intended.

Please read and follow the instructions in this guide to assist in proper installation, connection

anduseofyourELACDS-A101-GIntegratedAmplier.

DS-A101-G Features

WHAT’S INCLUDED

1-DS-A101-GIntegratedAmplier

1 - IR Remote Control

2 - AAA Batteries

1 - DS-A101-G Operating Instructions

DS-A101-G FEATURES

Basic Description

FiveSource,80Watt-per-channelIntegratedAmplier

Streaming: ROON, SPOTIFY, BLUETOOTH, AIRPLAY, DLNA, DISCOVERY

Amplier

2x80Watts;BASHTrackingAmplier

80W Continuous x 2 Channels @4Ωwith1%THD

Pleasevisitourwebsiteforfullamplierdetailsandperformancespecications

Audio Inputs

2 x Stereo Analog Line Level Audio Inputs

1 x Digital Optical Audio Inputs (up to 192kHz 24-bit)*

1 x Digital Coaxial Audio Input (up to 192kHz 24-bit)

*Due to differences in optical transmitters and optical cable quality/length, 192kHz is not guaranteed

Speaker Connections

2 x 5-way Binding Posts

Subwoofer Output

1 x Analog Line Level with AutoEQ

Audio Output

1 x Analog variable preamp

Control

Android or iOS Setup/Control App

IR Remote Control

Bluetooth

4.0 Low Energy

Audio Decoders

Dolby Digital 2.1 Decoding

DSP

AutoBlend(subwoofertomainspeakerconguration)

AutoEQ (automatic room correction)

Front Panel Display

OEL (Organic Electro-Luminescence)

Front Panel Features

Figure 1 DS-A101-G Front Panel Features

1. POWER - Lightly press to turn unit ON. The ELAC logo will appear in the front panel

display, followed by the current volume setting and currently selected input. Lightly

press again to turn unit OFF. Front panel display will turn OFF. Power can also be turned

ON/OFF with the hand-held IR Remote.

2. IR SENSOR - IR eye ‘sees’ IR commands from the DS-A101-G handheld remote. The IR

Sensor must be line-of-sight to the remote to receive commands. The IR Sensor can also

be used for learning IR commands from a third-party integrated remote allowing system

control from a single remote control.

3. FRONT PANEL DISPLAY - Front panel OEL (Organic Electro-Luminescence) display

indicates ON/OFF status, source selected, volume/mute setting and Dolby Audio™ logo

when Dolby Digital signals are being received.

4. SOURCE - Lightly tap the Source button to change input selections one at a time. Press

and hold to scroll inputs to the desired selection.

5. VOLUME CONTROL - Turn clockwise (to the right) to increase volume through speakers

or headphones. Turn counter-clockwise (to the left) to decrease volume. This is a digital

control and does not have a physical stop. Watch the front panel display for level and

becarefultonotdamagetheamp,speakersoryourears!TheVolumeControlwillalso

adjust the output level of the Sub Out, if used.

Rear Panel Features

Figure 2 DS-A101-G Rear Panel Features

6. AC MAINS - Afterallotherconnectionshavebeenmadeandconrmed,usingthe

included power cord, connect the AC Mains on the DS-A101-G to an unswitched AC

outlet.

7. LINE IN - Using a quality stereo RCA to RCA cable, connect the L&R outputs on a stereo

audio source to the Line IN L&R inputs on the DS-A101-G. This input can be selected by

pressing Ana 1 on the remote or by tapping the front panel Source button.

8. LINE 2 IN - Using a quality stereo RCA to RCA cable, connect the L&R outputs on a

stereo audio source to the Line 2 IN L&R inputs on the DS-A101-G. This input can be

selected by pressing Ana 2 on the remote or by tapping the front panel Source button.

9. COAX IN - Using a quality digital coaxial audio cable, connect the Coaxial OUT on a

source component to the Coax IN on the DC-A101-G. The Dolby logo will appear in the

front panel display when Dolby Digital signals are present. This input can be selected by

pressing Coax on the remote or by tapping the front panel Source button.

10. ANALOG PRE OUT - Using a quality RCA to RCAcable, connect your PREAMP to the

ANALOG PRE OUT on the rear of DS-A101-G.

11. SPEAKER OUT - Using 16AWG (min) speaker wire, connect the Right and Left Speaker

terminals on the DS-A101-G to the appropriate speaker terminals on left and right

speakers. Before connecting the speaker wires, twist the ends of the speaker wire

so there are no strays that can cause shorts. See section: Connections/Speaker

Connections for additional information.

8 9

15 14

13 12

12. SUB OUT - Using a quality RCA to RCA cable, connect the SUB OUT on the DS-A101-G to

the SUB IN on a powered subwoofer or sub amp. Once the initial sub settings have been

made, the Volume Control will adjust both Speaker and Sub Out levels as a master

control.

13. ETHERNET - Using an Ethertnet cable, connect the ETHERNET port on the DS-A101-G to

local network (LAN).

This input can be selected by pressing on the remote or by tapping the front

panel Source button.

Alternatively, LAN connection can also be setup via WIFI using the app, instead of

ETHERNET cable.

14. PAIR - Push this small button to pair DS-A101-G with Bluetooth devices for audio

streaming.

15. OPTICAL IN - Using a quality digital optical audio cable, connect the Optical OUT on a

source component to the Optical IN on the DS-A101-G. The Dolby logo will appear in

the front panel display when Dolby Digital signals are present. This input can be selected

by pressing Opt on the remote or by tapping the front panel Source button.

Rear Panel Features (cont)

IR Remote Features

Figure 3

DS-A101-G IR Remote Features

1. POWER - Press to turn unit ON. The ELAC logo will

appear in the front panel display, followed by the

current volume setting and currently selected input.

Press again to turn unit OFF. Front panel display will

turn OFF. Power can also be turned ON/OFF with the

front panel Power button

2. VOLUME/TRANSPORT -

Volume - The Volume controls will adjust the

volume to the speakers, subwoofer, (if used) or

headphones, (if connected).

Press Vol+ to increase volume.

Press Vol - to decrease volume.

Transport - The Transport buttons will control

play/pause, previous track and next track on a

compatible Android or iOS device that is paired to

the DS-A101-G.

Press once to Play a selected track.

Press again to Pause a selected track.

Press to select the previous track.

Press to select the next track.

3. INPUT SELECT - Press these buttons to select audio

source devices connected to the DS-A101-G rear

panel inputs.

Ana 1 - Press to select the device connected to

Line IN.

Ana 2 - Press to select the device connected to

Line 2 IN.

Opt - Press to select the device connected to

Optical IN.

Coax - Press to select the device connected to

Coax IN.

(BLUETOOTH) - Press this button for various

Bluetooth functions. See section: Bluetooth for

additional information.

(STREAMING) - Press this button for various

streaming options.

4. Mute- Press this button to mute the audio.

Installation

Amplier Location

Beforemakinganyconnections,besuretolocatetheDS-A101-Gonastable,atsurface

suchasashelfortabletop.Provideenoughspacearoundtheamplierforthefreeowof

air, and do no block any of the vents on the bottom, sides or top, particularly if the amp is

going to be located in a cabinet or closet. Leave enough space around the amp for the

wires that are connected to the amp and other devices and do not allow the wires to block

theventsorthefreeowofairaroundtheamp.Donotexposetheamptodirectsunlight.

Figure 4 Typical DS-A101-G System

SERVICE

RESET

LFE IN

POWER

100-120V/220-240V

~50/60Hz 2A

T2A L 250V

S10EQ HIGH PERFORMANCE SUBWOOFER

Designed in Cypress, CA

ELAC Americas LLC.

11145 Knott Ave. Suite E&F

Cypress, CA. 90630

Serial Number

MADE IN CHINA

Model: DS10EQ1-BK

CAUTION: FOR CONTINUED PROTECTION

AGAINST RISK OF FIRE, REPLACE ONLY

WITH SAME TYPE FUSE AND RATING.

ATTENTION: UTILISER UNE FUSIBLE DE

RECHANGE DE MEME TYPE ET CALIBRE.

CD PLAYER

OPTICAL COAXIAL

L R

LINE LEVEL OUT

MUSIC SERVER

OPTICAL COAXIAL

L R

LINE LEVEL OUT

BLU-RAY PLAYER

OPTICAL COAXIAL

L R

LINE LEVEL OUT

HDMI

ELAC S10EQ SUBWOOFER ELAC B5 BOOKSHELF SPEAKERS

ELAC DS-A101-G

INTEGRATED AMPLIFIER

CD Player

Music Server

Blu-ray Disc Player

HD Video Display

CD Player Line Out to Amp Line In

Server Optical Out to Amp Optical In

Blu-ray Optical Out to Amp Optical In

Blu-ray HDMI Out to TV HDMI In

Android/iOS

Phone/Tablet

with Bluetooth

Running EA101EQ-G App

Connections

Speaker Connections

1. Use 16AWG (min) 2-conductor stranded speaker wire for speaker connections.

2. Strip approximately 1/2 to 3/4 of an inch off the ends and twist the strands together so

there are no loose ends that can cause shorts.

3. Ontheamplierrearpanel,turntheclearendsoftheSpeakerTerminalscounterclockwise

so there is enough room between the post and the clear end to feed the stripped wire

through the post hole without damaging the strands.

4. Conrmpolarity.(Redwireto+)

5. Turn the clear ends clockwise to tighten the post and secure the wire.

6. Repeat for left and right speakers, + and -.

7. Conrmconnectionandpolarity.

8. Connect the speaker wires to the appropriate + and - terminals on the speakers.

9. Conrmconnection,polarityandposition.

NOTE: IftheSpeakerOutsensesashort,theamplierwillenterprotectmodeand‘Protect’

will appear in the front panel display. In protect mode, the audio amp will be shut down, but

the logic and control will remain on. Source select and volume changes will be shown in the

display, but there will be no output from the amp and ‘Protect’ will again be shown in the

display after changes are made.

Toresettheamp,powercycletheamp(unplugtheamplierfromthewalljackfor5seconds

and then plug it back in). If the amp does not return to normal operation, please contact

ELAC at 714.252.8843 or at [email protected].

Other Connections

For information on connecting audio devices to the DS-A101-G, see section: Rear Panel Fea-

tures.

For information regarding Bluetooth audio streaming, see section: Bluetooth.

Figure 5 DS-A101-G Speaker Connections

DS-A101-G Rear Panel

SPEAKER OUT

RIGHT LEFT

Red Wire

To Positive

Right Speaker

Red Wire

To Positive

Left Speaker

IR Remote/Front Panel Control

IR REMOTE/FRONT PANEL CONTROLS

The DS-A101-G can be controlled via the included IR Remote, front panel controls or DS-

A101-G app. The front panel and remote would typically be used for amp control. The

apphasuniquefeaturesthatcanbeusedfornetuningampperformancebasedupon

thespecicsources,speakersandroomconditions.ThissectioncoversfrontpanelandIR

Remote control. See section: DSA101-G App for information on the use of the app for setup

andnetuning.

ON/OFF

On the IR Remote, Press the button to turn the amp ON. Press again to turn the amp OFF.

On the front panel, Press the Power button to turn the amp ON. Press again to turn the amp

OFF. When the amp is turned ON, the front panel display will show the ELAC logo followed by

the volume level, current source. If the source is outputting a Dolby Digital signal, the Dolby

Audio™ Logo will appear. When the amp is turned OFF the display will turn off.

VOLUME/MUTE

On the IR Remote, Press the button to increase volume. Press the button to

decrease volume. Press the button to mute audio output. Press the button again to

un-mute audio output. On the front panel, turn the Volume knob clockwise (right) to increase

volume. Turn the Volume knob counter-clockwise (left) to decrease volume. There is no front

panel mute control.

When adjusting volume, the volume level will appear in the front panel display.

NOTE: If a subwoofer is connected, the volume/mute controls will affect speaker and sub

volume/mute. If headphones are connected, output to the speakers/sub will be cut and the

volume/mute controls will affect headphone volume/mute.

SOURCE SELECT

On the IR Remote, press the Ana 1, Ana 2, Opt, , Coax or USB buttons to select a

specicsource.Onthefrontpanel,taptheSourcebuttontochangesourceselectionone

at a time. Press and Hold to scroll through available sources to the desired selection.

NOTE: For a Bluetooth source, see section: Bluetooth for additional information.

Bluetooth

BLUETOOTH

The DS-A101-G has two connections for Bluetooth. One is for Bluetooth Audio Streaming,

(playing music from a phone or tablet via Bluetooth through the DS-A101-G). The other is for

use with the DS-A101-G App.

Minimum Bluetooth Requirements:

Bluetooth Version: v4.0 or better to run the DS-A101-G App

Bluetooth Proles: A2DP for Bluetooth Audio Streaming and AVRCP for IR control of a paired

phone or tablet

BLUETOOTH PAIRING (BLUETOOTH AUDIO STREAMING)

1. ConrmthatBluetoothisONonthephoneortablettobeusedbygoingtoSettingsand

then Bluetooth in the device menu.

2. On the DS-A101-G IR Remote, press the button to switch the amp to the Bluetooth input.

Next, press and hold the button to start the pairing process. ‘BT Pair’ will appear in the

front panel display.

3. Under Available Devices, look for: ELAC USB Amplier. This is the connection for Bluetooth

Audio Streaming. Tap it. It should pair to the DS-A101-G.

4. To test, press the button on the IR Remote to select the Bluetooth input on the amp. Play

some music on the paired phone or tablet. It should play through the amp. If not, repeat

Steps 1-3toconrmtheELACUSBAmplierBluetoothconnection.

Appropriately featured smartphones, tablets and other devices can be paired to the DS-

A101-G Amp via Bluetooth for Bluetooth Audio Streaming. The DS-A101-G IR Remote can

be used to control transport functions, (play/pause, previous/next track) on appropriately

featuredphonesandtabletsforadditionalcontrolexibility.SeeSection:IR Remote Features

for additional information.

BLUETOOTH PAIRING (DS-A101-G App)

The DS-A101-G App is a setup app that can run on either Android or iOS devices. The

Android version can be downloaded from Play Store. The iOS version can be downloaded

from App Store.

1. Withtheappdownloadedandinstalled,conrmthatBluetoothisONonthephoneor

tablet to be used by going to Settings and then Bluetooth in the device menu.

2. Launch the DS-A101-G App. A black ELAC Screen will appear with an instruction to

select a device from the list. Tap DS-A101-G Control and the app will sync to the amp.

Typically, once the app has been synchronized to the amp from a phone or tablet, unless

the app gets uninstalled, the app will automatically sync to the DS-A101-G amp if the

amp is in range and the app has not been turned off. If the app gets tuned off and gets

relaunched on a previously paired phone or tablet, the app will automatically sync when

launched.

3. Toconrmthattheappissynchronizedtotheamp,taptheAnalog1,Analog2,Coax,

etc. labels at the top of the Master Volume screen. If the source shown on the amp front

panel display changes with the source selected from the app, the app is synchronized.

IMPORTANT NOTE: Bluetooth can be simultaneously connected to two devices, but only

one can play at a given time. If one stops playing, the other can then play. If one device

is connected another can be paired without disconnecting the connected device. If two

devices are connected a new device cannot be paired without disconnecting one of the

connected devices.

DS-A101-G APP

The DS-A1010-G App is a two-way setup app that connects to the amp via Bluetooth Low

Energy. App setup features include: source select, master volume, offset (individual source)

volume, source naming, bass/treble, sub volume, balance, Auto Blend, IR Remote learning

and screen brightness. The app will open to the Master Volume screen when launched.

DS-A101-G App

MASTER VOLUME

TheMasterVolumeslidersetstheamplier

output volume. It affects the output to the

speakers and sub (if used) and headphones if

connected.

When adjusting master volume, the volume

level will appear in a bubble on the app

screen and on the front panel display. If the

volume is adjusted with the IR remote or front

panel volume control, the app master volume

will adjust automatically in real time.

OFFSET VOLUME

The Offset Volume slider sets the output of

each connected source relative to the other

sources. This allows adjusting the source

levels so when switching from one source to

another, one won’t be very loud and another

very soft. When adjusting Offset level be

sure to use program material that is equal in

intensity, volume and dynamics so the settings

are made to the relative output of the sources

and not the program material itself. Setting

the Offset on one source to soft solo harp

music and another to pounding electronic

dance music will not result in proper settings.

The app provides two digital meters to

Figure 6 DS-A101-G App - Master Volume

indicate the relative input and output level of each source. Green is good. Amber is OK, but

not too much, and Red is bad. The ideal settings have the Output levels set so that no source

isintheredandmaybejustickeringtheambercell.Alsotrytosettheindividualoutputsso

that no source can get so loud that it can damage the amp, speakers or your ears, even if

theampgetsturnedallthewayup!TheOffsetlevelscanonlybeadjustedusingtheapp...so

keeptheappawayfromthekidsandfriends!

1. Before setting the Offsets, turn the Master Volume down a bit just in case a particular

source comes on louder than expected.

2. With all connected sources playing consistent program material, tap through all inputs at

the top of the app screen to get a feel for which input are louder and softer.

3. Adjust the Offset for each source until the output from the speakers, or headphones is

consistent across all sources. The settings will be automatically stored in the amp.

DS-A101-G App

SETUP

The settings for Input Names, Bass/Treble,

Sub Level, Screen Brightness and Speaker

Balance can all be accessed by tapping

the Settings Gear in the top right corner of

the app when in the Source select/Volume

screen. (Figure 6)

Tap the gear. The Settings Menu will appear.

INPUT NAMES

Each of the inputs can be renamed to

indicate the actual connected source...i.e.

Optical 1 can be changed to TV or

Blu-ray. USB can be changed to Computer

or Server. The maximum number of

characters is 9.

1. In the settings menu tap Input Names.

2. Tap to the right of a NAME in the list.

Repeatedly tap the backspace key to

delete the default name. OR...Drag/

select a name in the list.

3. The device keyboard will appear. Type

the new name...Cable, Blu-ray, Internet,

Server, etc.

4. Tap next to change other names and

repeat Steps 2-4.

5. Whennishedtaptheslidericonatthe

top right to return to the source/volume

screen or select another setting in the

menu bar. To return to the Setup menu

tap the back button on the phone or

tablet.

Figure 7 DS-A101-G App - Setup Menu

Figure 8 DS-A101-G App - Name Inputs

DS-A101-G App

BASS/TREBLE

The Bass/Treble section adjusts the tone

controls for the DS-A101-G master output.

Each control can be adjusted +/-12dB.

1. In the Settings Menu tap Bass/Treble.

2. Withangertip,slidethebluedotonthe

Bass slider to adjust bass to desired level.

A bubble will appear to indicate level

setting.

3. Withangertip,slidethebluedotonthe

Treble slider to adjust treble to desired

level. A bubble will appear to indicate

level setting.

4. Settings will be automatically stored in the

amp.

5. To return to the Setup Menu tap the back

button on the phone or tablet.

6. Whennishedtaptheslidericonatthe

top right to return to the source/volume

screen.

SCREEN BRIGHTNESS

Screen Brightness adjusts the intensity of the

DS-A101-G front panel display.

RANGE: 1-100.

The Screen Auto ON/OFF sets the front panel

display to stay on or turn off after making

changes to power, source, volume, etc.

1. In the settings menu tap Brightness.

2. Withangertip,slidethebluedotonthe

Brightness slider to adjust the front panel

display intensity to desired level. A bubble

will appear to indicate level setting.

3. To change the Screen Auto ON/OFF

Figure 9 DS-A101-G App - Bass/Treble

Figure 10 DS-A101-G App - Screen Brightness

Setting, slide the switch to the left (white) to have the display remain on while the amp is

powered ON. Slide the switch to the right (blue) to have the display turn off after making

changes to power, source, volume, etc while the amp is powered ON.

4. Settings will be automatically stored in the amp.

5. To return to the Setup Menu tap the back button on the phone or tablet.

6. Whennishedtaptheslidericonatthetoprighttoreturntothesource/volumescreen.

DS-A101-G App

SPEAKER BALANCE

Speaker Balance adjusts the relative volume

of the left and right speakers. Use this control

to adjust the stereo sound from the speakers

if they are unevenly placed relative to

the listening position. Each control can be

adjusted +/-100 with 0 being center.

1. In the settings menu tap Balance.

2. Withangertip,slidethebluedotonthe

Speaker Balance slider to adjust balance

to the desired position. A bubble will

appear to indicate the setting.

3. Setting will be automatically stored in the

amp.

4. To return to the Setup Menu tap the back

button on the phone or tablet.

5. Whennishedtaptheslidericonatthe

top right to return to the source/volume

screen.

Figure 11 DS-A101-G App - Balance

DS-A101-G App

REMOTE LEARNING

The Remote Learning section allows the DS-

A101-G to learn IR commands from other

remote controls. This can simplify user control

by teaching the amp commands from

another remote such as a TV remote so that

remote can be used to control the TV, DS-

A101-G and other devices if capable.

When learning commands, be sure to use

commands that will make sense when

controlling the amp. Use volume up/down

commands for volume. Use source select

commands for source select functions. Use

transport functions for play/pause/previous/

next.

NOTE: The Play/Pause button is also a mute

button except when used in Bluetooth mode

where it is a pause/play command for a

synchronized Bluetooth device. So...a mute

command will mute/unmute the speakers

for all sources except Bluetooth where it will

pause/play the synchronized device.

1. In the source/Master Volume screen, tap

the Setup Gear in the upper right corner.

From the Setup Menu, tap Remote

Learning. The Remote Learning - Select

screen will appear.

2. In the ‘Select’ screen tap a button to be

replaced with a new IR command. Follow

the cues on the amp front panel display.

‘Scanning’ will appear on the display.

3. Press the button on the remote to be

learned until the amp display indicates:

‘Captured’. The Display will indicate ‘OK’

if the code was learned.

4. When ‘Again’ appears on the front panel

display, press the SAME BUTTON on the

remote to be learned until the amp

again indicates: ‘Captured’.

5. The amp will return to it’s previous

operating mode.

6. Press the button on the learned remote

to test the command to be sure the

command has been learned and is

affecting the proper function.

Figure 12 DS-A101-G App -

Remote Learning - Select

Figure 13 DS-A101-G App -

Remote Learning - Learn

DS-A101-G App

7. Repeat Steps 2-6 for all commands to be

learned.

8. For additional Setup Modes, tap an item

from the Menu Bar at the top of the

screen.

9. Whennishedtaptheslidericonatthe

top right to return to the source/volume

screen.

ABOUT

The About screen indicates important

information about the device to which the

app is synchronized (DS-A101-G). This can

be useful for service purposes to determine

whether the device has most current

rmwaretoprovidebestperformanceand

latestfeatures.Toconrmrmwareversion:

1. With the DS-A101-G app synchronized

to the amp, select About from the Setup

Menu Bar.

Periodically visit http://elac.com/rmware

tocheckforrmwareupdatestoassure

your amp has all current feature and

performance updates.

Figure 14 DS-A101-G App - About

DS-A101-G App

WIFI SETUP

Usethissetuppagetocongurethe

DS-A101-Gwithyourwinetwork.

The page shown in Figure 15 displays the

current status. It can display one of the

following connection status:

• not connected

• connectedtowi

• connected to ethernet

You can use speaker connection status to

determineifwisetupwassuccessful.

Inordertoseethewiconnection,make

sure the ethernet is not connected, because

the DS-A101-G will favor the ethernet

connectionoverwiconnection.

Tocreateawiconnectiondothefollowing

steps:

1. Choseawinetworkfromthelisttostart

wisetup.Ifthelistisempty,makesure

wiisenabledonthephone.

2. Enterwinetworkpasswordinthe

requiredeldandpressSUBMIT.See

Figure 16.

3. Gobacktowisetuppagetocheckthe

wiconnectionstatus.

Figure 15 DS-A101-G App -

WIFI - Current status display

Figure 16 DS-A101-G App -

WIFI - Password Submit

La page charge ...

Elac Discovery Series DS-A101-G Wireless Integrated Amplifier Le manuel du propriétaire

Marque: Elac

Modèle: Discovery Series DS-A101-G Wireless Integrated Amplifier

Catégorie: Équipement musical supplémentaire

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

Elac Discovery Series DS-A101-G Wireless Integrated Amplifier Le manuel du propriétaire

Elac Discovery Series DS-A101-G Wireless Integrated Amplifier Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents