Philips CONNECTE HD3198/77 Le manuel du propriétaire

Marque: Philips

Modèle: CONNECTE HD3198/77

Catégorie: Cuiseurs multiples

Taper: Le manuel du propriétaire

EN User manual 1 FR Mode d’emploi

http://www.philips.com/welcome

User manual

http://www.philips.com/welcome

Recipe

http://www.philips.com/welcome

Warranty

d e f

ihg

1 2

4 5

HD3198

Specifications are subject to change without notice

HD3198_UM_FR_v2.0

Always there to help you

Question?

Contact

Philips

www.philips.com/welcome

11 12

13 14

15 16

19 20

3029

2827

English

Contents

1 Your multicooker 2

2 Important 2

Safety 2

Electromagnetic elds (EMF) 5

3 What’s in the box (g. 1) 6

4 Overview (g. 2) 6

Product overview 6

Controls overview 6

Menus overview 7

5 Using the multicooker (g. 3) 8

Before rst use 8

Cooking rice (Riz) 8

Making risotto (Risotto) 9

Cooking cereal (Céréales) 9

Making soup (Soupe/Sauce) 10

Steam (Vapeur) 10

Stew (Mijoter) 10

Slow cooking (Slow cooking) 11

Baking (Four) 11

Roasting (Rissoler) 12

Frying (Frire) 12

Making pizza (Pizza) 12

Making omelette (Omelette) 13

Boiling pasta (Pâtes) 13

Boiling (Bouillir) 14

Making beverage (Compote) 14

Making conture (Conture) 14

Making yogurt (Yaourt) 15

Reheating (Réchauer) 15

Manual (Manuel) 15

Multi-stage cooking 16

MyRecipe (MyRecipe) 16

Warm keeping 17

Setting up the cooking time 17

Preset time for delayed

cooking 18

Setting up the WiFi

connection 18

Setting up the child lock 18

6 Cleaning and Maintenance 19

Interior 19

Exterior 19

Accessories 19

7 Recycling 19

8 Guarantee and service 19

9 Specications 20

10 Troubleshooting 21

1 Your

multicooker

Congratulations on your purchase, and

welcome to Philips!

To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome.

2 Important

Safety

Read this user manual carefully before

you use the appliance, and save it for

future reference.

Danger

• Do not immerse the

multicooker in water, nor

rinse it under the tap.

Warning

• This appliance shall not

be used by children from

0 year to 8 years. This

appliance can be used

by children aged from 8

years and above if they are

continuously supervised.

This appliance can be

used by people with

reduced physical, sensory

or mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Keep the

appliance and its cord out

of reach of children aged

less than 8 years. Cleaning

and user maintenance

shall not be made by

children.

• Children shall not play with

the appliance.

• Cooking appliances should

be positioned in a stable

situation with the handles

(if any) positioned to avoid

spillage of the hot liquids.

• This appliance is intended

to be used in household

and similar applications

such as:

• staff kitchen areas in

shops, offices and other

working environments;

• farm houses;

• by clients in hotels,

motels and other

residential type

environments;

• bed and breakfast type

environments.

• Make sure that the

damaged power cord

is replaced by Philips, a

service center authorized

by Philips or similarly

qualified persons in order

to avoid a hazard.

• The appliance is not

intended to be operated

by means of an external

English

timer or a separate

remote-control system.

• Check if the voltage

indicated on the

multicooker corresponds

to the local power voltage

before you connect it.

• Check if the steam valve is

clear before every cooking

and becomes block during

the cooking.

• If the steam valve is

blocked, the pressure will

increase in the appliance

and the jet of steam could

hurt and scald users.

• During cooking, steam can

only come out from the

steam valve. If steam starts

to come out between the

top lid and main body,

immediately power off

the multicooker. Check

if the sealing ring is in

place, in good condition

and stacked with foreign

objects/food residues. If

there are foreign objects/

food residues, clean

them up. If there is no

foreign object, return it

to the service center for

checking and sealing ring

replacement if necessary.

Note that sealing ring

lifetime is limited and

depend on cooking and

maintenance frequency.

• During cooking, water or

liquid food can’t come

out from the inner pot.

The only exception is

that water condenses

around the steam valve

and small amount of

water condensate leaks

on the back side of the

multicooker if top lid was

opened during cooking,

this can be easily wiped

off by clean cloth and

continuous cooking. If any

water/liquid food starts to

come out directly from the

steam valve or between

the top lid and main body,

immediately power off

the multicooker. Check

if the amount of water in

inner pot doesn’t exceed

allowed limit, amount of

food corresponds to the

recipe, cooking mode and

timing selection are correct

and the multicooker is

used according to the

user manual. Check if the

sealing ring is in place,

in good condition and

stacked with foreign

objects/food residues. If

there are foreign objects/

food residues, clean them

up. If there is no foreign

object and the multicooker

is used according to the

user manual, return it

to the service center for

checking and repair if

necessary.

• Only connect the

multicooker to a grounded

power outlet. Always

make sure that the plug

is inserted firmly into the

power outlet.

• Do not use the appliance

if the plug, the power cord,

the inner pot, the sealing

ring, or the main body is

damaged.

• Do not let the power cord

hang over the edge of the

table or worktop on which

the multicooker stands.

• Make sure the heating

element, the temperature

sensor, and the outside

of the inner pot are clean

and dry before you put the

plug in the power outlet.

• Do not plug in the

multicooker or touch any

of the buttons on the

control panel with wet

hands.

• Make sure to avoid spillage

on the power connector to

avoid a potential hazard.

• Always follow the

instructions and use the

appliance properly to

avoid potential injury.

• Do not put too much

cooking oil in the inner pot

to deep fry ingredients.

• To satisfy RF exposure

requirements, this device

should be operated with a

separation distance of at

least 20 centimeters from

all persons when the Wi-

Fi router is switched on.

The antenna used for the

transmitter must not be

co-located in conjunction

with any other antenna or

transmitter.

Caution

• Never use any accessories

or parts from other

manufacturers or

that Philips does not

specifically recommend. If

you use such accessories

or parts, your guarantee

becomes invalid.

• Do not expose the

multicooker to high

temperatures, nor place

it on a working or still hot

stove or cooker.

• Do not expose the

multicooker to direct

sunlight.

• Place the multicooker on

a stable, horizontal, and

level surface.

• Always put the inner pot in

the multicooker before you

put the plug in the power

outlet and switch it on.

• Do not place the inner pot

directly over an open fire

to cook dishes.

• Do not use the inner pot if

it is deformed.

English

• The accessible surfaces

may become hot when the

multicooker is operating.

Take extra caution when

touching the multicooker.

• Beware of hot steam

coming out of the steam

vent during cooking or out

of the multicooker when

you open the lid. Keep

hands and face away from

the multicooker to avoid

the steam.

• The inner pot and steamer

during and after cooking

process, may be hot and

heavy.

• Do not lift and move the

multicooker while it is

operating.

• Do not exceed the

maximum water level

indicated in the inner pot

to prevent overflow.

• Do not place the cooking

utensils inside the pot

during cooking, warm

keeping or reheating.

• Only use the cooking

utensils provided. Avoid

using sharp utensils.

• To avoid scratches, it is

not recommended to

cook ingredients with

crustaceans and shellfish.

Remove the hard shells

before cooking.

• Do not insert metallic

objects or alien substances

into the steam vent.

• Do not place a magnetic

substance on the lid. Do

not use the multicooker

near a magnetic

substance.

• Always let the multicooker

cool down before you

clean or move it.

• Always clean the

multicooker after use. Do

not clean the multicooker

in dishwasher.

• Always unplug the

multicooker if not used for

a longer period.

• If the multicooker

is used improperly

or for professional

or semiprofessional

purposes, or if it is not

used according to the

instructions in this user

manual, the guarantee

becomes invalid and

Philips refuses liability for

any damage caused.

• Surface of the heating

element is subject to

residual heat after use.

Electromagnetic fields

(EMF)

This Philips appliance complies with all

applicable standards and regulations

regarding exposure to electromagnetic

fields.

3 What’s in the

box (fig. 1)

a Multicooker main unit

b Power cord

c Measuring cup

d Detachable steam tray

e Rice scoop

f Soup ladle

g User manual

h Recipe booklet

i Warranty card

4 Overview (fig. 2)

Product overview

Top lid

Inner pot

Lid release button

Control panel

Heating element

Main body

Power socket

Cooker handle

Water level indications

Detachable steam vent cap

Sealing ring

Controls overview

Keep-warm button

Cooking time/preset button

Menu button

Temperature button

Cooking functions

WiFi indicator

Display screen

Decrease button

MyRecipe/Multi-stage cooking

button

Increase button

Start/Off button

English

Menus overview

Menus

Default

cooking

time

Cooking time

regulating

range

Preset

time

Default

cooking

temperature

Temperature

regulating

range

Rice (Riz) 40 min / 1-24 hr 130-140°C /

Risotto (Risotto) 40 min / 1-24 hr 130-140°C /

Cereal (Céréales) 10 min 5 min - 2 hr 1-24 hr 90-100°C /

Soup (Soupe/

Sauce) 1 hr 20 min-4 hr 1-24 hr 90-100°C /

Steam (Vapeur) 20 min 5 min - 2 hr 1-24 hr 100°C /

Stew (Mijoter) 1 hr 20 min - 10 hr 1-24 hr 95°C /

Slow cooking

(Slow cooking) 5 hr 1-15 hr 1-24 hr 80°C /

Bake (Four) 45 min 20 min - 2 hr / 130°C 40-160°C

Roast (Rissoler) 1 hr / / 130°C /

Fry (Frire) 15 min 5-60 min / 145-160°C /

Pizza (Pizza) 35 min 10-60 min / 130°C /

Omelette

(Omelette) 10 min 5-20 min / 120°C /

Pasta (Pâtes) 4 min 1-15 min / 100°C /

Boil (Bouillir) 4 min 1-15 min / 100°C /

Beverages

(Compote) 10 min 5-40 min 1-24 hr 100°C /

Confiture

(Confiture) 6 hr 4-10 hr 1-24 hr 90-100°C /

Yogurt (Yaourt) 8 hr 6-12 hr 1-24 hr 40±3°C /

Reheat

(Réchauffer) 25 min 5-60 min / 85°C /

Manual (Manuel) 2 hr 5 min - 10 hr 1-24 hr 100°C 30-160°C

Multi-stage

cooking

(MyRecipe) 10 min 5 min - 15 hr / 120°C 30-160°C

Note

• You can adjust the cooking temperature for the baking and manual functions. For baking,

the temperature is available from 40°C to 160°C; for the manual function, the temperature is

available from 30°C to 160°C.

• After the cooking has started, you can touch the Start/Cancel button (On/Off) to deactivate

the current cooking process, and the multicooker will switch to the standby mode.

5 Using the

multicooker

(fig. 3)

Note

• For all menus, do not exceed the MAX

indication on the inside of the inner pot

when putting food, liquid or ingredients

in it, otherwise the food may overflow

during cooking.

• The cooking time does not display

straight from the beginning for rice (Riz)

and risotto (Risotto). displays on

the screen during most of the cooking

time as the multicooker needs to detect

the water/liquid and ingredient volume

in the initial preparation stage. When

the multicooker detects the actual

cooking time needed, the remaining

cooking time displays on the screen. For

cereal (Céréales), steam (Vapeur), soup

(Soupe/Sauce), confiture (Confiture),

beverage (Compote), boil (Bouillir)

and pasta (Pâtes), displays on

the screen before the water/liquid is

brought to boil. When the water/liquid

starts boiling, the set cooking time

displays on the screen.

• Refer to the recipe booklet for more

details on cooking with each menu.

• Within 30 seconds after the multicooker

is plugged in, you can reset the

multicooker including the WiFi module

to factory mode. To do so, touch

increase "+" for 5 to 10 seconds and

"--:--" displays on the screen. All the

saved recipes and the previous WiFi

connection will be removed after reset.

Tip

• To select a certain menu, touch the

menu button (Menu) repeatedly. You

can also touch the menu button (Menu)

once, and then touch the increase (+) or

decrease (-) button to do so.

Before first use

1 Take out all the accessories from

the inner pot, and remove the

packaging material of the inner pot.

2 Clean all parts of the multicooker

thoroughly before using it for the

first time (see chapter ‘Cleaning and

Maintenance’).

Note

• Make sure all parts are completely dry

before you start using the multicooker.

Cooking rice (Riz)

Note

• If the voltage is unstable at the area

you live, it is possible that food in the

multicooker overflows.

• After the cooking is finished, stir the rice

and loosen it immediately to release

excessive moisture for fluffy rice.

• Depending on the cooking conditions,

the bottom portion of the rice may

become slightly browned.

1 Measure the rice using the

measuring cup provided (fig. a).

2 Rinse rice, put the washed rice

in the inner pot, and fill in water

(fig. b).

English

Note

• For details about the ratio of rice and

water, refer to the recipe booklet.

3 Touch the lid release button to

open the lid (fig. c).

4 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

Note

• Make sure that the inner pot is in proper

contact with the heating element.

• Make sure that the outside of the inner

pot is clean and dry, and that there is no

foreign residue on the heating element.

5 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

6 Touch the menu button (Menu) to

select rice (Riz) (fig. h).

7 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

8 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• The appliance remains at warm keeping

for 12 hours, after that it beeps and

cease warm keeping process.

Making risotto (Risotto)

1 Put the ingredients for the risotto

into the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select risotto (Risotto) (fig. j).

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Cooking cereal

(Céréales)

1 Put ingredients for the cereal into

the inner pot and stir a little bit.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select cereal (Céréales) (fig. k).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• For details about the ratio of food and

liquid, refer to the recipe booklet.

Making soup (Soupe/

Sauce)

1 Put food and ingredients for the

soup into the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select soup (Soupe/Sauce) (fig. l).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Steam (Vapeur)

1 Pour some water into the inner pot.

2 Put the steam tray in the inner pot,

put the food in a bowl, and then put

the bowl on the steam tray.

3 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

4 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

5 Touch the menu button (Menu) to

select Steam (Vapeur) (fig. m).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

6 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

7 When the water is brought to boil,

the appliance beeps, the remaining

steaming time displays on the

screen and starts counting down.

8 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• When steaming food, do not immerse

the steam tray in water.

• displays on the screen before the

water/liquid is brought to boil. When the

water/liquid starts boiling, the remaining

steaming time displays on the screen.

• After the steaming is finished, use a

kitchen glove or a cloth to remove the

bowl and steam basket, as they could

be very hot.

Stew (Mijoter)

1 Put the food and ingredients for the

stew in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select stew (Mijoter) (fig. n).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

English

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Slow cooking (Slow

cooking)

1 Put the food for slow cooking in the

inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select slow cooking (Slow cooking)

(fig. o).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Baking (Four)

1 Put the food and ingredients to

bake in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

Note

• If you bake other food with a

temperature above 140°C, keep the lid

open.

4 Touch the menu button (Menu) to

select bake (Four) (fig. p).

» To choose a different baking

temperature, touch the

temperature button (Temp) first,

and then touch the increase (+)

or decrease (-) button to select

the temperature you need.

(fig. q)

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• If the baking temperature is set below

80°C, when the cooking is finished,

the appliance turns into standby

automatically.

• When removing the inner pot from the

multicooker after cooking, use a kitchen

glove or a cloth, as the inner pot could

be very hot.

Roasting (Rissoler)

1 Put food and ingredients into the

inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select roast (Rissoler) (fig. r).

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 There are 2 stages of roasting. When

the first stage (about 35 minutes)

is over, the multicooker beeps as

a reminder for you to open the lid,

and turn the food over in the inner

pot.

» The remaining cooking time

displays on the screen.

7 Touch the menu button (Menu)

to start the second stage (about

25 minutes).

» If the menu button (Menu) is

not touched after the first stage

is over, the multicooker will turn

into warm keeping until the

cooking time is over.

8 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Frying (Frire)

1 Put food and ingredients into the

inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Put the plug in the power socket

(fig. g).

4 Touch the menu button (Menu) to

select fry (Frire) (fig. s).

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 Keep the lid open and stir the food

constantly with a spatula.

7 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Note

• Do not put too much cooking oil in the

inner pot to deep fry ingredients.

Making pizza (Pizza)

1 Put the ingredients for the pizza in

the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select pizza (Pizza) (fig. t).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

English

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• If you cook with frozen pizza, you can

adjust the cooking time according to your

own preference. The pizza gets browner

as the cooking time increases.

Making omelette

(Omelette)

1 Put the ingredients for the omelette

in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select omelette (Omelette) (fig. u).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Boiling pasta (Pâtes)

1 Fill the inner pot with some water.

Note

• Do not exceed the MAX indication on

the inside of the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select pasta (Pâtes) (fig. v).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the water is brought to

boil, the multicooker beeps as a

reminder for you to open the lid and

put the pasta in the inner pot.

7 After the pasta is put in the inner

pot, touch the menu button (Menu)

to resume the cooking process.

8 Keep the lid open and constantly

stir the pasta with a spatula.

9 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Boiling (Bouillir)

1 Fill the inner pot with some water.

Note

• Do not exceed the MAX indication on

the inside of the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select boil (Bouillir) (fig. w).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the water is brought to

boil, the multicooker beeps as a

reminder for you to open the lid and

put the food in the inner pot.

7 After the food is put in the inner

pot, close the lid and touch the

menu button (Menu) to resume the

cooking process.

8 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Making beverage

(Compote)

1 Put the ingredients for the beverage

in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select beverage (Compote) (fig. x).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Making confiture

(Confiture)

1 Put the ingredients for the confiture

in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select confiture (Confiture) (fig. y).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

English

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Making yogurt (Yaourt)

1 Whisk the ingredients for the yogurt

well and put them in the inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select yogurt (Yaourt) (fig. z).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

standby automatically.

Reheating (Réchauffer)

1 Loosen the food and evenly

distribute it in the inner pot.

2 If needed, pour some water

onto the food to prevent it from

becoming too dry. The quantity of

the water depends on the amount

of food.

3 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

4 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

5 Touch the menu button (Menu) to

select reheat (Réchauffer) (fig. {).

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

6 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

7 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Manual (Manuel)

You can use the manual function to

cook food with more control over the

cooking time and temperature.

1 Put food and ingredients into the

inner pot.

2 Wipe the outside of the inner pot

dry (fig. d), and then put it in the

multicooker (fig. e).

3 Close the lid of the multicooker

(fig. f), and put the plug in the

power socket (fig. g).

4 Touch the menu button (Menu) to

select manual (Manuel) (fig. |).

» To choose a different cooking

temperature, touch the

temperature button (Temp) first,

and then touch the increase (+)

or decrease (-) button to select

the temperature you need.

(fig. q)

» To choose a different cooking

time, refer to chapter "Setting up

the cooking time".

5 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

6 When the cooking is finished, the

appliance beeps and turns into

warm keeping automatically.

Note

• If you select a temperature below 80°C,

the multicooker automatically turns into

standby after the cooking process is

finished.

• If you select a temperature above 140°C,

the top lid must be open during cooking.

Multi-stage cooking

With the multi-stage cooking function,

you can set up to 9 stages of cooking

processes with different time and

temperature.

For example, you can set the first stage

for 5 minutes at 160°C, the second stage

for 10 minutes at 100°C and the last

stage for 20 minutes at 80°C.

1 When the multicooker is at standby

mode, touch the multi-stage

cooking button (MyRecipe). (fig. })

» "1" displays on the screen.

2 Refer to chapter "Setting up the

cooking time" and select the

cooking time for stage 1.

3 To choose a different cooking

temperature, touch the temperature

button (Temp) first, and then touch

the increase (+) or decrease (-)

button to select the temperature

you need for stage 1. (fig. ~)

4 Touch the multi-stage cooking

button (MyRecipe) again and move

to stage 2. (fig. )

» "2" displays on the screen.

5 Set the cooking time and

temperature for stage 2.

6 Repeat the above steps until you

have set all the stages you need,

and then touch and hold the start

button (On/Off) for 3 seconds to

confirm and start cooking (fig. i).

MyRecipe (MyRecipe)

Saving MyRecipe settings

Within 10 minutes after the stage

cooking is finished, you can save the

cooking stages in "MyRecipe".

1 Touch and hold (MyRecipe) for

3 seconds. (fig. €)

» “F1” displays on the screen.

2 Touch the increase (+) or decrease

(-) button to select one of the slots:

F1, F2, F3, F4 or F5 (fig. ).

3 Touch the multi-stage cooking

button (MyRecipe) to confirm and

save the cooking stages to the

designated slot (fig. ‚).

Note

• You can save up to 5 multi-stage

cooking recipes in MyRecipe, and they

are saved as F1, F2, F3, F4 an F5.

• To replace one of the current multi-

stage cooking recipes with a new

setting, follow the same steps above

to do so. When you are at step 2,

make sure that you select a slot with

the multi-stage cooking recipe you no

longer need, and then touch the multi-

stage cooking button (MyRecipe) to

confirm and save the new setting to the

same slot.

• The total cooking time for all the

cooking stages has a maximum

limitation of 24 hours.

English

Selecting already saved

MyRecipe (MyRecipe) settings

1 At standby mode, touch and hold

the multi-stage cooking button

(MyRecipe) for 3 seconds. (fig. €)

» “F1” displays on the screen.

2 Touch the increase (+) or decrease

(-) button to select one of

previously saved MyRecipe settings:

F1, F2, F3, F4 or F5 (fig. ).

3 Touch and hold the start button

(On/Off) for 3 seconds to confirm

and start cooking (fig. i).

Warm keeping

The multicooker provides you with easy

control over the keep-warm mode.

• After you have selected the cooking

function using the menu button

(Menu), if you start the cookign

process directly, the keep-warm

indicator will light up. After the

cooking is finished, the multicooker

will switch to keep-warm mode

directly.

• After you have selected the cooking

function using the menu button

(Menu), if you touch the keep-warm

button (Chaud) first, and then start

the cooking process, the keep-

warm indicator will be off. After the

cooking is finished, the multicooker

will be in standby mode.

Note

• At standby mode, you can touch the

keep-warm button (Chaud) to switch to

warm keeping.

• In keep-warm mode, you can touch the

keep-warm button (Chaud) to switch to

standby.

Setting up the cooking

time

You can adjust the cooking time for

some menus. Refer to the chapter

"Menus Overview" and see the cooking

time regulating range of different

menus.

1 Select the cooking menu you need.

2 Touch the cooking time button

(Temps de cuisson) (fig. ƒ).

» The hour unit flashes on the

screen.

3 Touch the increase (+) or decrease

(-) button to set the hour unit

(fig. „).

4 After the hour unit is set, touch the

cooking time button (Temps de

cuisson) again (fig. …).

» The minute unit flashes on the

screen.

5 Touch the increase (+) or decrease

(-) button to set the minute unit

(fig. †).

6 Touch and hold the start button

(On/Off) for 3 seconds to confirm

the cooking time and start cooking

(fig. i).

Preset time for delayed

cooking

You can set the preset cooking timefor

some menus. Refer to the chapter

"Menus Overview" and see the preset

time of different menus.

1 Select the cooking menu you need.

2 Touch and hold the preset time

button (Départ différé) for

3 seconds. (fig. ‡)

» The hour unit flashes on the

screen.

3 Touch the increase (+) or decrease

(-) button to set the hour unit

(fig. ˆ).

4 After the hour unit is set, touch

the preset time button (Temps de

cuisson) again (fig. ‰).

5 Touch the increase (+) or decrease

(-) button to set the minute unit

(fig. Š).

6 Touch and hold the start button

(On/Off) for 3 seconds to confirm

the preset time and start cooking

(fig. i).

Note

• The cooking process will be finished

when the preset time has elapsed. For

example, if you set a preset time of 8

hours, the dishes will be ready 8 hours

later.

Setting up the WiFi

connection

1 Download the Philips “Multicooker”

App to your smart phone from the

App Store, or by scanning the QR

code.

2 Launch the App on your smart

phone.

3 Plug in and switch on the

multicooker.

4 Touch and hold the WiFi button

until the WiFi indicator blinks

orange. (fig. ‹)

5 Follow the onscreen instructions in

the App to connect the multicooker

to your smart phone.

6 When the multicooker is connected

to your smart phone, the WiFi

indicator will be continuously lit

with the color blue.

Setting up the child lock

To protect your child from using the

multicooker or avoid any misoperation,

you can activate the child lock during a

cooking process.

• Touch and hold the menu button

(Menu) for 3 seconds to activate the

child lock (fig. Œ).

» The child lock icon lights up on

the display.

• To unlock, touch and hold the menu

button (Menu) for 3 seconds again

(fig. ).

» The child lock icon lights off.

La page charge ...

Philips CONNECTE HD3198/77 Le manuel du propriétaire

Marque: Philips

Modèle: CONNECTE HD3198/77

Catégorie: Cuiseurs multiples

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Philips CONNECTE HD3198/77 Owner's manual

Philips CONNECTE HD3198/77 Le manuel du propriétaire

Philips CONNECTE HD3198/77 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents