Wacker Neuson PTK4 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Operator’s Manual
Notice d'emploi
Pump
Pompe
PTS4V
Type PTS4V
Document 5200000982
Date
0917
Version
08
Language EN-FR
5200000982
Copyright notice
© Copyright 2017 by Wacker Neuson Production Americas LLC
All rights, including copying and distribution rights, are reserved.
This publication may be photocopied by the original purchaser of the
machine. Any other type of reproduction is prohibited without express
written permission from Wacker Neuson Production Americas LLC.
Any type of reproduction or distribution not authorized by Wacker
Neuson Production Americas LLC represents an infringement of valid
copyrights. Violators will be prosecuted.
Trademarks
All trademarks referenced in this manual are the property of their
respective owners.
Manufacturer
Wacker Neuson Production Americas LLC
N92W15000 Anthony Avenue
Menomonee Falls, WI 53051 U.S.A.
Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957
www.wackerneuson.com
Original instructions
This Operators Manual presents the original instructions. The original
language of this Operator’s Manual is American English.
PTS 4V Foreword
wc_tx003328gb_FM10.fm 3
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
identification
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
Serial number
(S/N)
For future reference, record the serial number in the space provided below. You will
need the serial number when requesting parts or service for this machine.
Machine
documentation
From this point forward in this documentation, Wacker Neuson Production
Americas L
LC will be referred to as Wacker Neuson.
Keep a copy of the Operator’s Manual with the machine at all times.
For spare parts information, please see your Wacker Neuson Dealer, or visit
th
e Wacker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
Machine Item Number
PTS 4V 5000620971
PTS 4V(I) 5000620972
m3/hr
m3/hr
Type/Model
Type/Model
gpm
gpm
Rev.
Rev.
MADE IN USA
MADE IN USA
kW
kW
lbs
lbs
kg
kg
Item Number
Item Number
Manuf.Yr.
Manuf.Yr.
hp
hp
ft
ft
m
Serial Number
Serial Number
150188
150188
wc_gr010879
Rev.
Rev.
kg
kg
MADE
MADE
IN USA
IN USA
gpm
gpm
lbs
lbs
hp
hp
kW
kW
m3/hr
m3/hr
Type/Model
Type/Model
Item Number
Item Number
m
l/min(rpm)
l/min(rpm)
ft
ft
117293
117293
Serial Number
Serial Number
Serial Number:
Foreword
4 wc_tx003328gb_FM10.fm
Expectations
for
information in
this manual
This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves the right to change
any portion of this information without notice.
The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
CALIFORNIA
Proposition
65 Warning
Engine exhaust, some of its constituents, and certain vehicle components contain
or emit chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm.
Laws
pertaining to
spark
arresters
NOTICE: State Health Safety Codes and Public Resources Codes specify that in
certain locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental
discharge of sparks or flames from the engine exhaust. Spark arresters are
qualified and rated by the United States Forest Service for this purpose. In order to
comply with local laws regarding spark arresters, consult the engine distributor or
the local Health and Safety Administrator.
Manufacturers
approval
This manual contains references to approved parts, attachments, and
modifications. The following definitions apply:
Approved parts or attachments are those either manufactured or provided by
Wacker Neuso
n.
Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wa
cker
Neu
son.
Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
Serious injury hazards to the operator and persons in the work area
Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions abo
ut
approved or
unapproved parts, attachments, or modifications.
2017-CE-PTS4V_en.fm
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
PTS4V
Centrifugal Trash Pump
To pump fluid
5000620972
11.9 kW
102 dB(A)
102 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX V
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
EC Declaration of Conformity
Menomonee Falls, WI, USA, 14.07.17
Original Declaration of Conformity
Travis Pound
Manager, Product Engineering
For Wacker Neuson
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Keith Herr
Vice President and Managing Director
For Wacker Neuson
Table of Contents
PTS 4V
wc_bo5000193035_08TOC.fm
7
Foreword 3
EC Declaration of Conformity 5
1 Safety Information 9
1.1 Signal Words Used in this Manual ....................................................... 9
1.2 Machine Description and Intended Use ............................................. 10
1.3 Safety Guidelines for Operating the Machine ..................................... 11
1.4 Service Safety .................................................................................... 13
1.5 Operator Safety while Using Internal Combustion Engines ............... 15
2 Labels 16
2.1 Label Locations .................................................................................. 16
2.2 Label Meanings .................................................................................. 17
3 Lifting and Transporting 20
3.1 Lifting the Machine ............................................................................. 20
3.2 Transporting the Machine ................................................................... 21
4 Operation 22
4.1 Preparing the Machine for First Use ................................................... 22
4.2 Recommended Fuel ........................................................................... 22
4.3 Refueling the Machine ........................................................................ 23
4.4 Machine Components Descriptions .................................................... 24
4.5 Positioning and Preparing the Machine for Operation ........................ 25
4.6 Starting, Operating, and Stopping the Machine ................................. 27
4.7 Emergency Shutdown Procedure ....................................................... 29
5 General Maintenance 30
5.1 Maintaining the Emission Control System .......................................... 30
5.2 Periodic Maintenance Schedule ......................................................... 30
5.3 Inspecting the Impeller and Checking the Impeller Clearance ........... 31
5.4 Storage ............................................................................................... 33
5.5 Machine Disposal / Decommissioning ................................................ 34
Table of Contents
PTS 4V
wc_bo5000193035_08TOC.fm
8
6 Engine Maintenance: Vanguard 305447 35
6.1 Periodic Maintenance Schedule .........................................................35
6.2 Oil recommendations ..........................................................................36
7 Troubleshooting 37
8 Technical Data 38
8.1 Engine .................................................................................................38
8.2 Pump ..................................................................................................39
8.3 Sound Measurements .........................................................................39
8.4 Dimensions .........................................................................................40
9 Emission Control Systems Information
and Warranty—Gasoline 41
9.1 Emission Control System Background Information ............................41
9.2 Limited Defect Warranty for Wacker Neuson Emission Control
Systems ..............................................................................................42
10 AEM Safety Manual 47
wc_si000770gb_FM10.fm
9
PTS 4V Safety Information
1 Safety Information
1.1 Signal Words Used in this Manual
This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE
signal words which must be followed to reduce the possibility of personal injury,
damage to the equipment, or improper service.
NOTICE: Used without the safety alert symbol, NOTICE in
dicates a situation
which, if not avoided, could result in property damage.
Note: A Note contains additional information important to a procedure.
This is the safety alert symbol. It is used to alert you to potential personal hazards.
Obey all safety messages that follow this symbol.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
To avoid death or serious injury from this type of hazard, obey all safety mes-
sages that follow this signal word.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
To avoid possible death or serious injury from this type of hazard,
obey all safety
messages that follow this signal word.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
To avoid possible minor or moderate injury from this type of hazard,
obey all
safety messages that follow this signal word.
wc_si000770gb_FM10.fm
10
PTS 4V
Safety Information
1.2 Machine Description and Intended Use
This machine is a centrifugal trash pump. The Wacker Neuson Trash Pump
consists of a tubular steel frame surrounding a gasoline or diesel engine, a fuel
tank, and an impeller pump with ports for water suction and discharge. The engine
rotates the impeller during operation. Waste water is drawn into the pump through
the suction port and expelled through the discharge port. The operator connects
hoses to the pump and routes them so that water and solids are drained from the
work area and discharged into an appropriate location.
This machine is intended to be used for general de-watering applications. This
machine is intended for the pumping of clear water, or water containing solids up to
the size stated within the product specifications, and up to the flow, head, and
suction lift limits also stated within the product specifications.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons in the area. Machine
damage caused by misuse is not covered under warranty.
The following are some examples of misuse:
Pumping flammable, explosive, or corrosive fluids
Pumping hot or volatile fluids that result in pump cavitation
Operating the pump outside of product specifications due to incorre
ct diameter
hoses, incorrect length hoses, other inlet or outlet restrictions, or excessive
suction lift or head
Using the machine as a ladder, support, or work surface
Operating the machine outside of factory specifications
Operating the machine in a manner inconsistent with all warnings found on
the
machine and in the Operator’s Manual
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
Heat, noise, exhaust, and carbon monoxide from the engine
Fire hazards from improper refueling techniques
Fuel and its fumes
Personal injury from improper lifting techniques
Projectile hazard from discharge
Crushing hazards from a tipping or falling pump
To protect yourself and others, make sure you thoroughly read and understand the
safety information presented in this manual before operating the machine.
wc_si000770gb_FM10.fm
11
PTS 4V Safety Information
1.3 Safety Guidelines for Operating the Machine
Operator
training
Before operating the machine:
Read and understand the operating instructions contained in all manuals
delivered with the machine.
Familiarize yourself with the location and proper use of all controls a
nd safety
devices.
Contact Wacker Neuson for additional training if necessary.
When operating this machine:
Do not allow improperly trained people to operate the machine. People
operating the machine must be familiar with the potential risks a
nd hazards
a
ssociated with it.
Operator
qualifications
Only trained personnel are permitted to start, operate, and shut down the machine.
They also must meet the following qualifications:
have received instruction on how to properly use the machine
are familiar with required safety devices
The machine must not be accessed or operated by:
children
people impaired by alcohol or drugs
Application
area
Be aware of the application area.
Keep unauthorized personnel, children, and pets away from the machine.
Remain aware of changing positions and the movement of other equipment and
personnel in the application area/job site.
Identify whether special hazards exist in the application area, such as toxic
gases, or unstable ground conditions, and take appropriate action to eliminate
the special hazards before using the machine.
Be aware of the application area.
Do not operate the machine in areas that contain flammable object
s, fuels, or
products that produce flammable vapors.
Safety
devices,
controls, and
attachments
Only operate the machine when:
All safety devices and guards are in place and in working order.
All controls operate correctly.
The machine is set up correctly according to the instructions in the Operator’s
Manual.
The machine is clean.
The machine’s labels are legible.
To ensure safe operation of the machine:
Do not operate the machine if any safety devices or guards are missin
g or
inoperative.
Do not modify or defeat the safety devices.
Only use accessories or attachments that are approved by Wacker Neuson.
wc_si000770gb_FM10.fm
12
PTS 4V Safety Information
Safe
operating
practices
When operating this machine:
Remain aware of the machine’s moving parts. Keep hands, feet, and loose
clothing away from the machine’s moving parts.
When operating this machine:
Do not operate a machine in need of repair.
Do not open the priming plug when the pump is hot. Do not loosen or remove
inlet or discharge hose fittings when the pump is hot. Hot water inside could be
pressurized much like the radiator on an automobile. Allow the pump to cool to
the touch before loosening the plug and before loosening or removing the inlet
or discharge hose fittings.
Do not position the pump on a loose, uneven, or unstable surface where it can
tip, roll, slide or fall! The pump must be secure before operating. Position the
pump on a firm, flat surface; adjust the trailer jacks (if applicable) to be sure the
pump is level and supported firmly.
Do not open the pump housing cover while the pump is operating or start the
pump with the cover off. The rotating impeller inside the pump can cut or sever
objects caught in it.
Do not block or restrict flow from the inlet hose or the discharge hose. Remove
kinks from the discharge hose before starting the pump. Operation with a
blocked inlet hose or discharge hose can cause water inside the pump to
overheat.
Do not reach into or insert anything into the pump while the engine is on! The
impeller inside the pump housing is turning at all times while the engine is
running.
Do not allow anyone to stand in front of the discharge port when starting the
engine or while priming the pump! The sudden out-rush of water could push or
knock a person down.
Always make sure the hose connections on the pump are tight. A loose
connection could cause water to spray or result in a hose falling off the pump
while it is in operation.
Always make sure the water stream from the pump discharge is not directed in
such a way so as to cause erosion to the surrounding ground or damage or
weakening of nearby structures!
Do not consume the operating fluids used in this machine. Depending on your
machine model, these operating fluids may include water, wetting agents, fuel
(gasoline, diesel, kerosene, propane, or natural gas), oil, coolant, hydraulic fluid,
heat transfer fluid (propylene glycol with additives), battery acid, or grease.
Personal
Protective
Equipment
(PPE)
Wear the following Personal Protective Equipment (PPE) while operating this
machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
wc_si000770gb_FM10.fm
13
PTS 4V Safety Information
1.4 Service Safety
Service
training
Before servicing or maintaining the machine:
Read and understand the instructions contained in all manuals delivered with
the machine.
Familiarize yourself with the location and proper use of all controls and safety
devices.
Only trained personnel shall troubleshoot or repair problems occurring with the
machine.
Contact Wacker Neuson for additional training if necessary.
When servicing or maintaining this machine:
Do not allow improperly trained people to service or maintain the machine.
Personnel servicing or maintaining the machine must be familiar with the
associated potential risks and hazards.
Precautions
Follow the precautions below when servicing or maintaining the machine.
Read and understand the service procedures before performing any service to
the machine.
All adjustments and repairs must be completed before operation. Do not
operate the machine with a known problem or deficiency.
All repairs and adjustments shall be completed by a qualified technician.
Turn off the machine before performing maintenance or making repairs.
Machine
modifications
When servicing or maintaining the machine:
Use only accessories/attachments that are approved by Wacker Neuson.
When servicing or maintaining the machine:
Do not defeat safety devices.
Do not modify the machine without the express written approval of Wacker
Neuson.
Replacing
parts and
labels
Replace worn or damaged components.
Replace all missing and hard-to-read labels.
When replacing electrical components, use components that are identical in
rating and performance to the original components.
When replacement parts are required for this machine, use only Wacker
Neuson replacement parts or those parts equivalent to the original in all types of
specifications, such as physical dimensions, type, strength, and material.
Cleaning
When cleaning and servicing the machine:
Keep the machine clean and free of debris such as leaves, paper, cartons, etc.
Keep the labels legible.
When cleaning the machine:
Do not clean the machine while it is running.
Never use gasoline or other types of fuels or flammable solvents to clean the
machine. Fumes from fuels and solvents can become explosive.
wc_si000770gb_FM10.fm
14
Safety Information
Personal
Protective
Equipment
(PPE)
PTS 4V
Wear the following Personal Protective Equipment (PPE) while servicing or
maintaining this machine:
Close-fitting work clothes that do not hinder movement
Safety glasses with side shields
Hearing protection
Safety-toed footwear
In addition, before servicing or maintaining the machine:
Tie back long hair
Remove all jewelry (including rings)
After use
Stop the engine when the machine is not being operated.
Close the fuel valve on engines equipped with one when the machine is not
being operated.
Ensure that the machine will not tip over, roll, slide, or fall when not be
ing
operated.
Store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
wc_si000770gb_FM10.fm
15
PTS 4V Safety Information
1.5 Operator Safety while Using Internal Combustion Engines
Operating
safety
When running the engine:
Keep the area around the exhaust pipe free of flammable materials.
Check the fuel lines and the fuel tank for leaks and cracks before starting th
e
engine. Do not run the machine if fuel leaks are present or the fuel lines are
loose.
When running the engine:
Do not smoke while operating the machine.
Do not run the engine near sparks or open flames.
Do not touch the engine or muffler while the engine is running or immediately
after it has been turned off.
Do not operate a machine when its fuel cap is loose or missing.
Do not start the engine if fuel has spilled or a fuel odor is present. Move the
machine away from the spill and wipe the machine dry before starting.
Refueling
safety
When refueling the engine:
Clean up any spilled fuel immediately.
Refill the fuel tank in a well-ventilated area.
Re-install the fuel tank cap after refueling.
Use suitable tools for refueling (for example, a fuel hose or funnel).
When refueling the engine:
Do not smoke.
Do not refuel a hot or running engine.
Do not refuel the engine near sparks or open flames.
WARNING
Internal combustion engines present special hazards during operation and fueling.
Failure to follow the warnings and safety standards could result in severe injury or
death.
Read and follow the warning instructions in the engine owner’s manual and
the
safety guidelines below.
DANGER
Exhaust gas from the engine contains carbon monoxide, a deadly poison.
Exposure to carbon monoxide can kill you in minutes.
NEVER operate the machine inside an enclosed area, such as a tunnel, unless
adequate ventilation is provided through such items as exhaust fans or hoses.
wc_si000771gb_FM10.fm
16
Labels PTS 4V
2 Labels
2.1 Label Locations
wc_gr010881
111891
STOP
117554
D
E
F
G
H
J
K
M
N
O
A
B
C
D
C
C
B
wc_si000771gb_FM10.fm
17
PTS 4V Labels
2.2 Label Meanings
A
DANGER
Asphyxiation hazard.
Engines emit carbon monoxide.
Do not run the machine indoors or in an
enclosed area.
NEVER use inside a home or garage, EVEN IF
doors and windows are open.
Only use OUTSIDE and far away from
windows, doors, and vents.
Read the Operator’s Manual.
No sparks, flames, or burning objects near the
machine.
Stop the engine before refueling.
Use only clean, filtered diesel fuel.
B
WARNING
Hot surface
C
CAUTION
Read and understand the supplied Operators
Manual before operating this machine. Failure to
do so increases the risk of injury to yourself and
others.
117034
STOP
PELIGRO
DANGER
GEFAHR
DANGER
STOPSTOP
178715
ADVERTENCIAADVERTENCIA
AVERTISSEMENTAVERTISSEMENT
117038117038
WARNINGWARNING
ATTENTIONATTENTION
CAUTIONCAUTION
VORSICHTVORSICHT
ATENCIONATENCION
110167110167
178714178714
wc_si000771gb_FM10.fm
18
Labels PTS 4V
D
WARNING
Pressurized contents. Do not open when hot!
E
WARNING
Never pump volatile, flammable, or low-flash-point
fluids. These fluids could ignite or explode.
F
Lifting point
G
Guaranteed sound power level in dB(A)
110164110164
ADVERTENCIAADVERTENCIA
AVERTISSEMENTAVERTISSEMENT
WARNINGWARNING
ADVERTENCIAADVERTENCIA
WARNUNGWARNUNG
110164110164
WARNINGWARNING
AVERTISSEMENTAVERTISSEMENT
51000155655100015565
178764
178764
NE JAMAIS POMPER DES
NE JAMAIS POMPER DES
LIQUIDES VOLATILES,
LIQUIDES VOLATILES,
INFLAMMABLES OU A BAS POINT
INFLAMMABLES OU A BAS POINT
CES LIQUIDES
CES LIQUIDES
POURRAIENT PRENDRE FEU OU
POURRAIENT PRENDRE FEU OU
EXPLOSER.
EXPLOSER.
NUNCA BOMBEAR LIQUIDOS
NUNCA BOMBEAR LIQUIDOS
VOLATILES INFLAMABLES O DE
VOLATILES INFLAMABLES O DE
PUNTO BAJO DE ENCENDIDO.
PUNTO BAJO DE ENCENDIDO.
ESTOS FLUIDOS PUEDEN
ESTOS FLUIDOS PUEDEN
ENCENDERSE O EXPLOTAR.
ENCENDERSE O EXPLOTAR.
AVERTISSEMENT
AVERTISSEMENT
ADVERTENCIA
ADVERTENCIA
151049
151049
NEVER PUMP VOLATILE,
NEVER PUMP VOLATILE,
FLAMMABLE OR LOW FLASH
FLAMMABLE OR LOW FLASH
POINT FLUIDS. THESE FLUIDS
POINT FLUIDS. THESE FLUIDS
COULD IGNITE OR EXPLODE.
COULD IGNITE OR EXPLODE.
WARNUNG
WARNUNG
WARNING
WARNING
5200015475 PT4
5200015475 PT4
164 kg
164 kg
(360 LBS)
(360 LBS)
wc_si000771gb_FM10.fm
19
PTS 4V Labels
H
Key switch:
Off
On
Start
J
Throttle control lever:
Turtle = Idle or Slow
Rabbit = Full or Fast
K
This machine may be covered by one or more
patents.
M
WARNING
Operation of this equipment may create sparks
that can start fires around dry vegetation. A spark
arrester may be required. The operator should
contact local fire agencies for laws or regulations
relating to fire prevention requirements.
N
Certified Performance
Contractors Pump Bureau
A Bureau of AEM
The manufacturer of this pump certifies that it was
manufactured in accordance with the standards of
the Contractors Pump Bureau.
O
Emission Control Information
This equipment meets U.S. EPA EVAP standards.
Evaporative Family: JW1XPNHEQCL2
UTILITY 159116UTILITY 159116
U.S.PAT.Nos.: 6012285, 6471476, U.S.PAT.Nos.: 6012285, 6471476,
D416858, D454357 OTHER U.S. AND D416858, D454357 OTHER U.S. AND
FOREIGN PATENTS PENDINGFOREIGN PATENTS PENDING
WARNING
Operation of This Equipment May Create Sparks That Can Start Fires Around Dry
Vegetation. A Spark Arrestor May be Required. The Operator Should Contact Local
Fire Agencies For Laws or Regulations Relating to Fire Prevention Requirements.
Per CAL. PRC. CODE
wc_tx003329gb_FM10.fm
20
Lifting and Transporting PTS 4V
3 Lifting and Transporting
3.1 Lifting the Machine
Requirements
Lifting equipment (crane, hoist, or fork truck) capable of supporting the
machine’s weight
Lifting devices (hooks, chains, and shackles) capable of supporting the
machine’s weight
Engine stopped
Lifting the
machine
A lifting eye is used for lifting the machine.
Perform the procedure below to lift the machine.
1. Attach the lifting devices and equipment to the lifting eye. Do not attach lifting
devices to any other part of the machine.
2. Lift the machine a small distance.
3. Check for stability. If necessary, lower the machine, reposition the lifting devices,
and lift the machine a small distance again.
4. Continue lifting the machine only when it is stable.
wc_gr012959
WARNING
Crushing hazard. An unstable machine may cause the lifting devices and
equipment to fail. You may be crushed if the lifting devices and equipment fail.
Check for stability before continuing.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120

Wacker Neuson PTK4 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues