Yamaha RX-V750 Le manuel du propriétaire

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

Printed in Malaysia WC85520

RX-V750 AV Receiver

DSP-AX750SE AV Amplifier

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

GB

RX-V750/DSP-AX750SE

RXV750_RDS_cv.fm Page 1 Wednesday, January 21, 2004 11:44 AM

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, and/or cold.

Allow ventilation space of at least 30 cm on the top,

20 cm on the left and right, and 20 cm on the back of

this unit.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this unit

in a environment with high humidity (i.e. a room with

a humidifier) to prevent condensation inside this

unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may

fall onto this unit and/or this unit may be exposed to

liquid dripping or splashing. On the top of this unit,

do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may cause

fire, damage to this unit, and/or personal injury.

– Containers with liquid in them, as they may fall

and liquid may cause electrical shock to the user

and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth,

curtain, etc. in order not to obstruct heat radiation. If

the temperature inside this unit rises, it may cause

fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than specified

is dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from use

of this unit with a voltage other than specified.

13 To prevent damage by lightning, disconnect the

power cord from the wall outlet during an electrical

storm.

14 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

15 When not planning to use this unit for long periods

of time (i.e. vacation), disconnect the AC power plug

from the wall outlet.

16 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding that

this unit is faulty.

17 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

18 VOLTAGE SELECTOR (Asia and General models

only)

The VOLTAGE SELECTOR on the rear panel of this

unit must be set for your local main voltage BEFORE

plugging into the AC main supply. Voltages are:

Asia model ...................... 220/230-240 V AC, 50/60 Hz

General model .. 110/120/220/230-240 V AC, 50/60 Hz

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off. This state is called the

standby mode. In this state, this unit is designed to

consume a very small quantity of power.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

01EN_00_RXV750_GB.book Page i Thursday, February 12, 2004 5:15 PM

1

English

PREPARATIONINTRODUCTION

BASIC

OPERATION

SOUND FIELD

PROGRAMS

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control........................................................... 6

Using the remote control ........................................... 8

Front panel display .................................................... 9

Rear panel ................................................................ 11

SPEAKER SETUP ............................................... 12

Speaker placement ................................................... 12

Speaker connections ................................................ 13

CONNECTIONS .................................................. 16

Before connecting components................................ 16

Connecting video components................................. 17

Connecting audio components................................. 20

Connecting the antennas (RX-V750)....................... 22

Connecting the power supply cord .......................... 23

Turning on the power............................................... 25

AUTO SETUP....................................................... 26

Introduction.............................................................. 26

Optimizer microphone setup.................................... 26

Starting the setup ..................................................... 27

PLAYBACK.......................................................... 31

Basic operations....................................................... 31

Selecting sound field programs ............................... 33

Selecting input modes.............................................. 37

TUNING (RX-V750) ............................................ 39

Automatic and manual tuning.................................. 39

Presetting stations .................................................... 40

Selecting preset stations........................................... 42

Exchanging preset stations ...................................... 43

Receiving RDS stations ........................................... 44

Changing the RDS mode ......................................... 44

PTY SEEK function ................................................ 45

EON function........................................................... 46

RECORDING ....................................................... 47

SOUND FIELD PROGRAM

DESCRIPTIONS...............................................48

For movie/video sources.......................................... 48

For music sources .................................................... 51

ADVANCED OPERATIONS ..............................52

Selecting the OSD mode.......................................... 52

Using the sleep timer ............................................... 52

Manually adjusting speaker levels........................... 53

Using the test tone ................................................... 54

SET MENU ............................................................55

Using SET MENU................................................... 56

1 SOUND MENU.................................................... 57

2 INPUT MENU...................................................... 61

3 OPTION MENU................................................... 63

REMOTE CONTROL FEATURES ...................65

Control area ............................................................. 65

Setting manufacturer codes...................................... 66

Controlling other components ................................. 68

Programming codes from other remote controls ..... 69

Changing source names in the display window....... 70

Clearing function sets .............................................. 71

Clearing individual functions .................................. 72

EDITING SOUND FIELD PARAMETERS ......73

What is a sound field ............................................... 73

Changing parameter settings ................................... 73

SOUND FIELD PARAMETER

DESCRIPTIONS...............................................75

TROUBLESHOOTING .......................................79

RESETTING THE FACTORY PRESETS ........84

GLOSSARY...........................................................85

Audio formats .......................................................... 85

Sound field programs............................................... 86

Audio information ................................................... 86

Video signal information ......................................... 87

SPECIFICATIONS...............................................88

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

SOUND FIELD PROGRAMS

ADVANCED OPERATION

ADDITIONAL INFORMATION

01EN_00_RXV750_GB.book Page 1 Thursday, February 12, 2004 5:15 PM

FEATURES

2

Built-in 7-channel power amplifier

◆ Minimum RMS output power

(0.06% THD, 20 Hz – 20 kHz, 8Ω)

Front: 100 W + 100 W

Center: 100 W

Surround: 100 W + 100 W

Surround back: 100 W + 100 W

Sound field features

◆ Proprietary YAMAHA technology for the creation of

sound fields

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6,

DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/Dolby Pro Logic

IIx decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner (RX-V750)

◆ 40-station random access preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

Other features

◆ YPAO: YAMAHA Parametric Room Acoustic

Optimizer for automatic speaker setup

◆ 192-kHz/24-bit D/A converter

◆ A SET MENU which provides you with items for

optimizing this unit for your audio/video system

◆ 8 additional input jacks for discrete multi-channel input

◆ PURE DIRECT for pure fidelity sound with analog and

PCM sources

◆ On-screen display function helpful in controlling this

unit

◆ S-Video signal input/output capability

◆ Component video input/output capability

◆ Video signal conversion (Composite video ↔ S-Video

→ Component video) capability for monitor out

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Cinema and music night listening modes

◆ Remote control with preset manufacturer codes and

“learning” capability

• This document is the owner’s manual for both RX-V750 and DSP-AX750SE. Since DSP-AX750SE does not incorporate a tuner,

descriptions on tuning are not applicable for DSP-AX750SE. Illustrations for the RX-V750 are mainly used for explanations.

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button

names differ between the main unit and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol

are trademarks of Dolby Laboratories.

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are trademarks of

Digital Theater Systems, Inc.

FEATURES

01EN_00_RXV750_GB.book Page 2 Thursday, February 12, 2004 5:15 PM

GETTING STARTED

3

English

INTRODUCTION

Please check that you received all of the following parts.

1 Press the part and slide the battery

compartment cover off.

2

Insert four supplied batteries (AAA, R03,

UM-4) according to the polarity markings

(+ and –) on the inside of the battery

compartment.

3 Slide the cover back until it snaps into place.

Notes on batteries

• Change all of the batteries if you notice the following

conditions; the operation range of the remote control decreases,

the indicator does not flash or its light becomes dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

GETTING STARTED

Supplied accessories

TRANSMIT

RE-NAME

INPUT MODE

STANDBY

SYSTEM

POWER

AB

PHONO

CDMD/CD-RTUNERV-AU X

DVD

AMP

POWERPOWER

REC

AUDIO

MUTE

MENUTITLE

CH CH

VOL

DISC SKIP

FREQ/RDS EON

START

SET MENU

LEVEL

A/B/C/D/E

TV INPUT

MODE

PTY SEEK

TV VOL

PRESET

TEST

ON SCREEN

STRAIGHT

ROCKJAZZHALLSTEREO

4321

8

10

7

09

65

ENTER

MOVIETV THTRMUSIC ENTERTAIN

EX/ES

NIGHTq/DTS

PURE DIRECT

EFFECT

CHP/INDEX

DISPLAYRETURN

PRESET

TV MUTE

SELECT

TV VOL

AVTV

SELECT

VCR 1DTV/CBL DVR/VCR2

MULTI CH IN

SLEEP

CLEAR LEARN

Remote control

Batteries (4)

(AAA, R03, UM-4)

Indoor FM antenna

(U.S.A., Canada, China,

Asia and General models)

AM loop antenna

Indoor FM antenna

(Europe, Australia and

Korea models)

Optimizer microphone

RX-V750

Installing batteries in the remote

control

1

3

2

If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

01EN_00_RXV750_GB.book Page 3 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

4

1 STANDBY/ON

Turns on this unit or sets it to the standby mode. When you

turn on this unit, you will hear a click and there will be a 4

to 5-second delay before this unit can reproduce sound.

In standby mode, this unit consumes a small amount of power in

order to receive infrared-signals from the remote control.

2 OPTIMIZER MIC jack

Use to connect and input audio signals from the supplied

microphone for use with the AUTO SETUP function (see

page 26).

3 Remote control sensor

Receives signals from the remote control.

4 Front panel display

Shows information about the operational status of this

unit.

5 A/B/C/D/E (NEXT)

Selects the speaker channel to be adjusted.

[ RX-V750 ] Selects one of the 5 preset station groups (A

to E) when the unit is in tuner mode.

6 PRESET/TUNING l / h (LEVEL –/+)

Adjusts the level of the speaker channel selected using

A/B/C/D/E (NEXT).

[ RX-V750 ] Selects preset station number 1 to 8 when the

colon (:) is displayed next to the band indication in the

front panel display when the unit is in tuner mode. Selects

the tuning frequency when the colon (:) is not displayed.

7 MEMORY (MAN’L/AUTO FM)

(RX-V750)

Stores a station in the memory. Hold down this button for

more than 3 seconds to start automatic preset tuning.

CONTROLS AND FUNCTIONS

Front panel

AUTO/MAN'L MONO

S VIDEO VIDEO OPTICALL AUDIO R

MAN'L/AUTO FMLEVELNEXTEDIT

EFFECT

MEMORYFM/AMPRESET/TUNING

OPTIMIZER

MIC

A/B/C/D/E

PROGRAM

l PRESET/TUNING h

TUNING MODE

PURE DIRECTINPUT MODETONE CONTROLSTRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

STANDBY

/ON

BA

MULTI CH

INPUT

VOLUME

VIDEO AUX

INPUT

LEVEL

314526 09

J

KHGEBACDF I

RDS MODE/FREQ EON

MODE

PTY SEEK

START

MNOL

78

56

(RX-V750

U.S.A. model)

(Europe model only)

Note

01EN_00_RXV750_GB.book Page 4 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

5

English

INTRODUCTION

8 TUNING MODE (AUTO/MAN’L MONO)

(RX-V750)

Switches the tuning mode between automatic (AUTO

indicator on) and manual (AUTO indicator off).

9 VIDEO AUX jacks

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select V-AUX as the input

source.

0 VOLUME

Controls the output level of all audio channels.

This does not affect the REC OUT level.

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with

headphones. When you connect headphones, no signals

are output to the OUTPUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down

to the left and right headphone channels.

B SPEAKERS A/B

Turns on or off the set of front speakers connected to the A

and/or B terminals on the rear panel each time the

corresponding button is pressed.

C PRESET/TUNING (EDIT)

(RX-V750)

Switches the function of PRESET/TUNING l / h

(LEVEL –/+) between selecting preset station numbers

and tuning.

D STRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

E FM/AM

(RX-V750)

Switches the reception band between FM and AM.

F PROGRAM

Use to select sound field programs or adjust the bass/treble

balance (in conjunction with TONE CONTROL).

G TONE CONTROL

Use to adjust the bass/treble balance for the front left and

right, center, presence and subwoofer channels (see

page 32).

H INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit’s input jacks (see page 37).

I INPUT selector

Selects the input source you want to listen to or watch.

J MULTI CH INPUT

Selects the source connected to the MULTI CH INPUT

jacks. When selected, the MULTI CH INPUT source takes

priority over the source selected with INPUT (or the input

selector buttons on the remote control).

K PURE DIRECT

Turns on or off PURE DIRECT mode (see page 36).

■ RX-V750 Europe model only

L RDS MODE/FREQ

Press this button when the unit is receiving an RDS station

to cycle the display between the PS mode, PTY mode, RT

mode, CT mode (if the station offers those RDS data

services) and/or the frequency display.

M PTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

N PTY SEEK START

Press this button to begin searching for a station after the

desired program type has been selected in the PTY SEEK

mode.

O EON

Press this button to select a radio program type (NEWS,

INFO, AFFAIRS, SPORT) to tune in automatically.

01EN_00_RXV750_GB.book Page 5 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

6

This section describes the function of each control on the

remote control used to control this unit. To operate other

components, see “REMOTE CONTROL FEATURES” on

page 65.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 TRANSMIT indicator

Flashes while the remote control is sending signals.

3 STANDBY

Sets this unit in the standby mode.

4 SYSTEM POWER

Turns on the power of this unit.

5 Input selector buttons

Select the input source and change the control area.

6 Display window

Shows the name of the selected source component that

you can control.

7 LEVEL

Selects the speaker channel to be adjusted and sets the

level.

8 Cursor buttons u / d / j / i / SELECT

Use to select and adjust sound field program parameters or

SET MENU items.

[ RX-V750 ] Press j / i to select preset station numbers

when the unit is in tuner mode.

9 TEST (RETURN)

Outputs the test tone to adjust the speaker levels.

Returns to the previous menu level when adjusting the

SET MENU parameters.

0 Sound field program / numeric buttons

Use to select sound field programs.

[ RX-V750 ] Use numbers 1 through 8 to select preset

stations when the unit is in tuner mode.

A RE-NAME

Use to change the input source name in the display

window (see page 70).

B CLEAR

Use to clear functions acquired when using the learn and

rename features, or setting manufacturer codes (see

page 71).

C LEARN

Use to set up manufacturer codes or program functions

from other remote controls (see pages 66 and 69).

D SLEEP

Sets the sleep timer.

E INPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit’s input jacks (see page 37).

Remote control

TRANSMIT

RE-NAME

INPUT MODE

STANDBY

SYSTEM

POWER

AB

PHONO

CDMD/CD-RTUNERV-AUX

DVD

AMP

POWERPOWER

REC

AUDIO

MUTE

MENUTITLE

CH CH

VOL

DISC SKIP

FREQ/RDS EON

START

SET MENU

LEVEL

A/B/C/D/E

TV INPUT

MODE

PTY SEEK

TV VOL

PRESET

TEST

ON SCREEN

STRAIGHT

ROCKJAZZHALLSTEREO

4321

8

10

7

09

65

ENTER

MOVIETV THTRMUSIC ENTERTAIN

EX/ES

NIGHTq/DTS

PURE DIRECT

EFFECT

CHP/INDEX

DISPLAYRETURN

PRESET

TV MUTE

SELECT

TV VOL

AVTV

SELECT

VCR 1DTV/CBL DVR/VCR2

MULTI CH IN

SLEEP

CLEAR LEARN

A

B

C

D

E

G

I

J

K

L

M

N

P

H

Q

8

9

7

0

2

3

4

1

6

5

F

O

01EN_00_RXV750_GB.book Page 6 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

7

English

INTRODUCTION

F MULTI CH IN

Selects MULTI CH INPUT when using an external

decoder (etc.).

G SELECT k/n

Selects another component that you can control

independently of the input component selected with the

input selector buttons.

H AMP

Selects the AMP mode. You must select the AMP mode to

control the main unit.

I VOL –/+

Increases or decreases the volume level.

J MUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level.

K SET MENU (A/B/C/D/E)

Activates the SET MENU function.

[ RX-V750 ] Selects preset station groups when the unit is

in tuner mode.

L ON SCREEN

Selects the display mode of the on-screen display (OSD)

this unit sends to your video monitor.

M STRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

N EX/ES

Switches between 5.1 or 6.1/7.1-channel playback of

multi-channel software.

O NIGHT

Turns on or off the night listening modes (see page 36).

P PURE DIRECT

Turns on or off PURE DIRECT mode (see page 36).

■ RX-V750 Europe model only

Q RDS tuning buttons

FREQ/RDS

Press this button when the unit is receiving an RDS station

to cycle the display between the PS mode, PTY mode, RT

mode, CT mode (if the station offers those RDS data

services) and/or the frequency display.

EON

Press this button to select a radio program type (NEWS,

INFO, AFFAIRS, SPORT) to tune in automatically.

PTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

PTY SEEK START

Press this button to begin searching for a station after the

desired program type has been selected in the PTY SEEK

mode.

01EN_00_RXV750_GB.book Page 7 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

8

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity such as near a bath

– high temperature such as near a heater or stove

– extremely low temperatures

– dusty places

Using the remote control

AUTO/MAN'L MONO

S VIDEO VIDEO OPTICALL AUDIO R

MAN'L/AUTO FMLEVELNEXTEDIT

EFFECT

MEMORYFM/AMPRESET/TUNING

OPTIMIZER

MIC

A/B/C/D/E

PROGRAM

l PRESET/TUNING h

TUNING MODE

PURE DIRECTINPUT MODETONE CONTROLSTRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

STANDBY

/ON

BA

MULTI CH

INPUT

VOLUME

VIDEO AUX

INPUT

30 30

TRANSMIT

RE–NAME

CLEAR

LEARN

POWER SLEEP

STANDBY

INPUT MODE

SYSTEM

PHONO TUNER CD

MULTI CH IN

V

-

AUX

CBL/SAT MD/TAPE CD-R

DTV DVR/VCR2VCR 1 DVD

SELECT

POWER

TV

POWER

AV

AMP

REC

DISC SKIP

AUDIO

VOL

LEVEL

TITLE

TV INPUT

TV VOL

SET MENU

MENU

A/B/C/D/E

MUTE

CH

TV MUTE

SELECT

CH

PRESET PRESET

TEST

RETURN

TV VOL

ON SCREEN

DISPLAY

STRAIGHT

EFFECT

STEREO

HALL

JAZZ

ROCK

12

34

56

8

ENTERTAIN

MUSIC

TV THTR

MOVIE

7

90

ENTER

+10

EX/ES

THX /DTS

NIGHT

CHP/INDEX

Approximately 6 m

01EN_00_RXV750_GB.book Page 8 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

9

English

INTRODUCTION

1 Decoder indicators

When any of this unit’s decoders function, the respective

indicator lights up.

2 SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected (see page 32).

3 NIGHT indicator

Lights up when you select night listening mode.

4 Input source indicators

A cursor lights to show the current input source.

5 Sound field indicators

Light to indicate the active DSP sound fields.

6 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program.

7 AUTO indicator

(RX-V750)

Lights up when this unit is in automatic tuning mode.

8 TUNED indicator

(RX-V750)

Lights up when this unit is tuned into a station.

9 STEREO indicator

(RX-V750)

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the AUTO indicator is lit.

0 MEMORY indicator

(RX-V750)

Blinks to show that a station can be stored.

A MUTE indicator

Blinks while the MUTE function is on.

B VOLUME level indication

Indicates the volume level.

C PCM indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

D VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see

page 37).

E Headphones indicator

Lights up when headphones are connected.

F SP A B indicators

Light up according to the set of front speakers selected.

Both indicators light up when both sets of speakers are

selected.

G SLEEP indicator

Lights up while the sleep timer is on.

H HiFi DSP indicator

Lights up when you select a HiFi DSP sound field

program.

Front panel display

PHONOCDTUNER

MD/CD-R

DVD

HiFi DSP

DTV/CBL

V-AUXVCR1

DVR/VCR2

96

24

q

PL

q

EX

q

PL

MATRIX DISCRETE

SILENT CINEMA NIGHT PTY HOLD AUTO

PS RT CT EONPTY

TUNED STEREO MUTE

VOLUME

MEMORY

SLEEP

VIRTUAL

PCM

q

PL x

A B

SP

ft

mS

dB

96/24

LFE

LCR

SL SB SR

q

DIGITAL

t

OPTIMIZER

123456 780AB9

FG

O

HI L

JMK NEDC

(RX-V750 Europe model only)

Presence DSP sound field

Listening position

Left surround

DSP sound field

Right surround

DSP sound field

Surround back DSP sound field

01EN_00_RXV750_GB.book Page 9 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

10

I Multi-information display

Shows the current sound field program name and other

information when adjusting or changing settings.

J OPTIMIZER indicator

Lights up during the auto setup procedure and when the

auto setup speaker settings are used without any

modifications.

K 96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

L LFE indicator

Lights up when the input signal contains the LFE signal.

M Input channel indicators

Indicate the channel components of the current digital

input signal.

N Presence and surround back speaker

indicators

Indicate the connection of presence and/or surround back

speakers when using the SPEAKER LEVEL setting (see

page 59).

O RDS indicators

(RX-V750 Europe model only)

The name(s) of the RDS data offered by the currently

received RDS station light(s) up.

EON lights up when an RDS station that offers the EON

data service is being received.

PTY HOLD lights up while searching for stations in the

PTY SEEK mode.

01EN_00_RXV750_GB.book Page 10 Thursday, February 12, 2004 5:15 PM

CONTROLS AND FUNCTIONS

11

English

INTRODUCTION

1 DIGITAL INPUT jacks

See pages 17, 19 and 20 for details.

2 Audio component jacks

See page 20 for connection information.

3 Video component jacks

See pages 17 and 19 for connection information.

4 Antenna terminals

See page 22 for connection information.

5 PRESENCE/ZONE 2 speaker terminals

(U.S.A., Canada and Australia models)

PRESENCE speaker terminals

(other models)

See page 14 for connection information.

6 AC OUTLET(S)

Use to supply power to your other A/V components (see

page 23).

7 DIGITAL OUTPUT jack

See page 20 for details.

8 MULTI CH INPUT jacks

See page 18 for connection information.

9 TUNER jacks

(DSP-AX750SE)

See page 20 for connection information.

0 PRE OUT jacks

See page 21 for connection information.

A Speaker terminals

See page 14 for connection information.

B IMPEDANCE SELECTOR switch

See page 24.

< Asia and General models only >

FREQUENCY STEP switch

See page 22.

VOLTAGE SELECTOR

See page 23.

Rear panel

GND

AUDIO AUDIO

DIGITAL

INPUT

DVD

CD

COAXIAL

OPTICAL

DTV/CBL

MD/CD-R

OPTICAL

SUB

WOOFER

SURROUND

BACK

SURROUND

FRONT

OUT

(REC)

IN

(PLAY)

MD

/CD-R

CD

PHONO

DVD

VIDEO

S VIDEO

MONITOR

OUT

DTV

/CBL

DVD

COMPONENT VIDEO

PR PB Y

75Ω UNBAL.

FM

ANT

AM

ANT

GND

TUNER

DTV

/CBL

IN

VCR 1

OUT

IN

DVR/

VCR 2

OUT

CENTER

DIGITAL

OUTPUT

MULTI CH INPUT

TUNER

VIDEO S VIDEO

MONITOR OUT

FRONT

SUB

WOOFER

FRONT

A

B

CENTER

PRE OUT

SURROUND

BACK

PRESENCE

/ZONE 2

SPEAKERS

SURROUND

CENTER SURROUND BACK

IMPEDANCE SELECTOR

AC OUTLETS

SWITCHED

12 3 4 5

78

9

0A

B

6

(RX-V750)

(DSP-AX750SE)

01EN_00_RXV750_GB.book Page 11 Thursday, February 12, 2004 5:15 PM

SPEAKER SETUP

12

The speaker layout below shows the standard ITU-R

speaker setting. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

Front speakers (FR and FL)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers an equal distance from

the ideal listening position. The distance of each speaker

from each side of the video monitor should be the same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Align the front

face of the center speaker with the front face of your video

monitor. Place the speaker centrally between the front

speakers and as close to the monitor as possible, such as

directly over or under it.

Surround speakers (SR and SL)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m above the

floor.

Surround back speakers (SBR and SBL)

The surround back speakers supplement the surround

speakers and provide for more realistic front-to-back

transitions. Place these speakers directly behind the

listening position and at the same height as the surround

speakers. They should be positioned at least 30 cm apart.

Ideally, they should be positioned at the same width as the

front speakers.

Subwoofer

The use of a subwoofer, such as the YAMAHA Active

Servo Processing Subwoofer System, is effective not only

for reinforcing bass frequencies from any or all channels,

but also for high fidelity reproduction of the LFE (low-

frequency effect) channel included in Dolby Digital and

DTS software. The position of the subwoofer is not so

critical, because low bass sounds are not highly

directional. But it is better to place the subwoofer near the

front speakers. Turn it slightly toward the center of the

room to reduce wall reflections.

Presence speakers (PR and PL)

Presence speakers supplement the sound from the front

speakers with extra ambient effects produced by CINEMA

DSP (see page 48). These effects include sounds that

filmmakers intend to locate a little farther back behind the

screen in order to create more theater-like ambience. Place

these speakers at the front of the room about 0.5 - 1 m

outside the front speakers, facing slightly inwards, and

about 1.8 m above the floor.

SPEAKER SETUP

Speaker placement

60˚

30˚

PL

PR

SBR

SBL

FL

FR

C

SL

SR

80˚

SL

more than 30 cm

1.8 m

01EN_00_RXV750_GB.book Page 12 Thursday, February 12, 2004 5:15 PM

13

English

SPEAKER SETUP

PREPARATION

Be sure to connect the left channel (L), right channel (R),

“+” (red) and “–” (black) properly. If the connections are

faulty, no sound will be heard from the speakers, and if the

polarity of the speaker connections is incorrect, the sound

will be unnatural and lack bass.

• If you will use 6 ohm speakers, be sure to set

this unit’s speaker impedance setting to 6

ohms before using (see page 24).

• Before connecting the speakers, make sure that the

power of this unit is off.

• Do not let the bare speaker wires touch each other or do

not let them touch any metal part of this unit. This

could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of

speakers still creates the interference with the monitor,

place the speakers away from the monitor.

A speaker cord is actually a pair of insulated cables

running side by side. One cable is colored or shaped

differently, perhaps with a stripe, groove or ridges.

Connect the striped (grooved, etc.) cable to the “+” (red)

terminals on this unit and your speaker. Connect the plain

cable to the “–” (black) terminals.

1 Remove approximately 10 mm of insulation

from the end of each speaker cable.

2 Twist the exposed wires of the cable together

to prevent short circuits.

3 Unscrew the knob.

4 Insert one bare wire into the hole in the side

of each terminal.

5 Tighten the knob to secure the wire.

■ Connecting to PRESENCE speaker

terminals

1 Open the tab.

2 Insert one bare wire into the hole of each

terminal.

3 Return the tab to secure the wire.

Speaker connections

CAUTION

10 mm

1

2

Red: positive (+)

Black: negative (–)

3

4

5

2

1

3

01EN_00_RXV750_GB.book Page 13 Thursday, February 12, 2004 5:15 PM

14

SPEAKER SETUP

FRONT

SUB

WOOFER

FRONT

A

B

CENTER

PRE OUT

SURROUND

BACK

PRESENCE

/ZONE 2

SPEAKERS

SURROUND

CENTER

SURROUND BACK

231

6 7 10

98

4 5

Subwoofer

system

Center

speaker

Front speakers (A)

Surround back

speakers

LeftRight

Surround speakers

Front

speakers

(B)

(RX-V750)

LeftRight

Presence speakers

You can connect both surround back and presence speakers to this unit, but they do not output sound simultaneously.

• The surround back speakers output the surround back channel included in Dolby Digital EX and DTS-ES software and only

operate when the Dolby Digital EX or DTS-ES decoder is turned on.

• The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields

are selected.

01EN_00_RXV750_GB.book Page 14 Thursday, February 12, 2004 5:15 PM

15

English

SPEAKER SETUP

PREPARATION

■ FRONT terminals

Connect one or two speaker systems to these terminals. If

you use only one speaker system, connect it to either the

FRONT A or B terminals.

■ CENTER terminals

Connect a center speaker to these terminals.

■ SURROUND terminals

Connect surround speakers to these terminals.

■ SUB WOOFER jack

Connect a subwoofer with built-in amplifier, such as the

YAMAHA Active Servo Processing Subwoofer System,

to this jack.

■ SURROUND BACK terminals

Connect surround back speakers to these terminals. If you

only connect one surround back speaker, connect it to the

left (L) terminals.

■ PRESENCE terminals

Connect presence speakers to these terminals.

1

6

7

8

9

2

3

5

4

10

Speaker layout

01EN_00_RXV750_GB.book Page 15 Thursday, February 12, 2004 5:15 PM

CONNECTIONS

16

Do not connect this unit or other components to the mains

power until all connections between components are

complete.

■ Cable indications

■ Analog jacks

You can input analog signals from audio components by

connecting audio pin cable to the analog jacks on this unit.

Connect red plugs to the right jacks and white plugs to the

left jacks.

■ Digital jacks

This unit has digital jacks for direct transmission of digital

signals through either coaxial or fiber optic cables. You

can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both

the COAXIAL and OPTICAL jacks, priority is given to

the input signals from the COAXIAL jack. All digital

input jacks are compatible with 96-kHz sampling digital

signals.

This unit handles digital and analog signals independently. Thus

audio signals input to the analog jacks are only output to the

analog OUT (REC) jacks. Likewise audio signals input to the

digital (OPTICAL or COAXIAL) jacks are only output to the

DIGITAL OUTPUT jack.

Dust protection cap

Pull out the cap from the optical jack before you connect

the fiber optic cable. Do not discard the cap. When you are

not using the optical jack, be sure to put the cap back in

place. This cap protects the jack from dust.

■ Video jacks

This unit has three types of video jacks. Connection

depends on the availability of input jacks on your monitor.

The signals input through the S VIDEO jacks on this unit

are automatically converted for output through the VIDEO

jacks. When V CONV. is set to ON (see page 63), signals

input through the VIDEO jacks can be output through the

S VIDEO and COMPONENT VIDEO jacks. Likewise,

signals input through the S VIDEO jacks can also be

output through the COMPONENT VIDEO jacks.

VIDEO jack

For conventional composite video signals.

S VIDEO jack

For S-Video signals, separated into luminance (Y) and

color (C) video signals to achieve high-quality color

reproduction.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and

color difference (P

B, PR) to provide the best quality in

picture reproduction.

When signals are input through both the S VIDEO and VIDEO

jacks, signals input through the S VIDEO jack have priority.

CONNECTIONS

Before connecting components

Note

CAUTION

S

V

O

V

L

R

C

left analog cables

right analog cables

optical cables

coaxial cables

video cables

S-Video cables

For analog signals

For digital signals

For video signals

Note

VIDEO

S VIDEO

COMPONENT VIDEO

P

R

P

B

Y

S VIDEO

VIDEO

COMPONENT

VIDEO

Signal flow inside this unit

Only when V CONV. is set to ON

(see page 63).

Output

(MONITOR OUT)

Input

01EN_00_RXV750_GB.book Page 16 Thursday, February 12, 2004 5:15 PM

17

English

CONNECTIONS

PREPARATION

■ Connections for DVD playback

Connecting video components

AUDIO

DVD

COAXIAL

DVD

VIDEO

S VIDEO

MONITOR

OUT

DVD

COMPONENT VIDEO

PR PB Y

VIDEO S VIDEO

MONITOR OUT

DIGITAL

INPUT

LRC

O

DVD player

Video

monitor

(RX-V750)

Optical out

Video out

Audio out

Video in

Coaxial out

01EN_00_RXV750_GB.book Page 17 Thursday, February 12, 2004 5:15 PM

18

CONNECTIONS

■ Connecting to the MULTI CH INPUT jacks

This unit is equipped with 8 additional input jacks (left and right FRONT, CENTER, left and right SURROUND, left and

right SURROUND BACK and SUB WOOFER) for discrete multi-channel input from a multi-format player, external

decoder, sound processor or pre-amplifier.

Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to

match the left and right outputs to the left and right input jacks for the front and surround channels.

• When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you

cannot select sound field programs.

• This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that

you connect at least a 5.1-channel speaker system before using this feature.

• When headphones are used, only front left and right channels are output.

Notes

SUB

WOOFER

SURROUND

FRONT

CENTER

MULTI CH INPUT

LR

SUB

WOOFER

SURROUND

BACK

SURROUND

FRONT

CENTER

MULTI CH INPUT

LR LR

LR

Multi-format player/

External decoder

For 6-channel input

Front

out

Surround

out

Subwoofer

out

Center

out

Multi-format player/

External decoder

Front

out

Surround

out

Subwoofer

out

Center

out

Surround

back out

For 8-channel input

(RX-V750)

01EN_00_RXV750_GB.book Page 18 Thursday, February 12, 2004 5:15 PM

La page est en cours de chargement...

Yamaha RX-V750 Le manuel du propriétaire

Yamaha RX-V750 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents