Bodyline Products International AX-5330 Manuel utilisateur

PLEASE READ DIRECTIONS COMPLETELY BEFORE USE.

AXIS SHAVERS INSTRUCTION MANUAL

Air

Model: AX-5330

Congrats!

You are now in possession of an Axis Air

Rechargeable/ AC-powered Shaver

AX-5330 – one of the world’s most advanced

electric shavers.

Please be sure to read this instruction manual

carefully before you use your shaver. This is your

guide for everything you’ll need to know about

proper use and care of your new shaver.

Keep this manual handy for future reference.

play hard, be smooth.

AXIS/Bodyline Products International, Inc.

198 N. Brandon Drive

Glendale Heights, Illinois 60139 USA

Made in China

Axis Air |4| english

Axis Air |5| english

IMPORTANT SAFETY

INSTRUCTIONS

Before you start using your shaver, please review these basic

precautions that will aid in your use of this electrical device.

Please read all instructions before using your shaver.

DANGER

To minimize the risk of electric shock…

NEVER REACH for a shaver that has been dropped into water. Unplug

the unit immediately.

DO NOT USE your shaver while bathing or showering.

ALWAYS UNPLUG your shaver after use or prior to cleaning the unit,

except when charging the unit.

DO NOT PLACE OR STORE the shaver in water or any other liquid or

where it may accidentally fall or be pulled into water.

WARNING

To avoid burns, ﬁre, electric shock or other injury…

1. Except when recharging your shaver, never leave the unit unat-

tended when plugged in.

2. Always provide close adult supervision when using your shaver near

children or the disabled.

3. Follow all instructions in this manual carefully. Do not use attach-

ments with your shaver that have not been speciﬁcally recommended

by Bodyline Products International Inc.

4. Do not use a unit that is not operating normally, has been immersed

in water or other liquid, or has a damaged cord or plug. Call 1-877-

Axis Air |6| english

Axis Air |7| english

263-9500 to arrange for service.

5. Never operate your shaver outdoors. Avoid use in the vicinity of

aerosol products or where oxygen is being administered. Also, keep

the cord away from heated surfaces.

6. When plugging in your shaver, ﬁrst attach the cord to the unit and

then plug the cord into an electric outlet. When disconnecting, be sure

to switch the unit off, unplug the cord from the electric outlet and then

detach the cord from the shaver.

7. Do not insert foreign objects into any of the openings in the unit.

8. Never store the unit with the cord attached.

9. Store your shaver and power cord in a dry place.

10. Avoid exposing the unit to direct sunlight or ambient temperatures

above 140°F (60°C).

11. To avoid injury to the face, do not use the unit if the cutters or

head assembly have been damaged.

12. Never wrap the power cord around the unit. Damage to the power

cord may result.

13. This shaver is intended and designed for use on human facial hair only.

14. Never unplug or plug-in the shaver when your hands are moist or wet.

15. For home use only.

WASHABLE SHAVER

A shaving appliance the hand-held part of which

may be cleaned under water

16. Use only in dry condition

17. Do not submerge shaver into water.

18. The hand-held unit shall be detached from the power supply cord

before cleaning.

Axis Air |8| english

Axis Air |9| english

19. The shaver shall not be used until it has dried.

SAVE THESE INSTRUCTIONS

PRECAUTIONS ON USING THE SHAVER

> Do not keep the shaver in a humid place, a place where the shaver

is exposed to splashes of water, or in high temperatures.

> To clean the body case of the shaver, wipe it with a cloth soaked

with a diluted water solution of a neutral detergent. Do not use thin-

ner or benzene as it will damage the plastic portions of the body.

> Do not recharge the shaver or use it with an AC power supply when

the room temperature is below 0° C or over 40° C. Also, never

recharge it under direct sunlight or near a heating element such as

heater or incandescent light.

> Do not recharge the shaver or use it with an AC power supply in a

humid place or a place where the shaver is exposed to splashes of

water.

> Do not leave the shaver unattended while it is recharged.

> If pre-shave lotion or shaver oil sticks to the body case of the

shaver, wipe it off completely. Otherwise, the plastic portions of the

shaver may be damaged.

> Before shaving, wipe off oiliness of your face. Otherwise, the shav-

ings will stick to the outer foil as the inner blade rubs against it. If

you ﬁnd the outer foil soiled, wipe it clean with tissue paper or the

like before using the shaver.

> Excessive application of shaver oil will also soil the outer foil. In that

case, wipe the foil clean with tissue paper or the like before using

the shaver. When cleaning the shaver, take care not to apply an

excess amount of shaver oil on the inner blade and outer foil.

Axis Air |10| english

Axis Air |11| english

PARTS OF YOUR SHAVER

Accessories:

> Brush

> Mesh travel pouch

> AC adaptor

AC adaptor

bottom view

shaver back

low battery

LED indicator

socket

cover

Rear Rizer

TM

Axis Flex-Foil

TM

Flex-Foil

TM

hood

Flex-Foil

TM

hood frame

inner cutters

Flex-Foil

TM

hood

release button

Rear Rizer switch

TM

Slide-and-Lock

TM

on/off

Lite-and-Fade

TM

LEDs

shaver body

actuator

Axis Air |12| english

Axis Air |13| english

RECHARGING YOUR SHAVER

*When recharging your shaver, do not use any other AC adaptor other

than the one included with this package.

First time charging / Recharging after prolonged storage:

Before using your new shaver for the ﬁrst time or if the shaver has been

in storage for any extended period of time, be sure to recharge the

shaver batteries to their capacity for a full 8 hours before use. Next, use

this full charge until the shaver batteries are completely exhausted. After

this, you can fully recharge your shaver battery in approximately 1 hour.

Regular Recharging

1. Slide the “Slide-and-Lock” power switch to its off position and put

the cap on.

2. Securely insert the power cord of the AC adaptor into the bottom

socket of the shaver.

* Before connecting the power cord plug from the AC adaptor into the

bottom socket of the shaver, make sure that the socket is completely

dry, to prevent any possible malfunction.

3. Connect the AC adaptor plug into the AC outlet.

* Your shaver will be fully charged in approximately 1 hour, and the

stored power will last approximately

one week if the shaver is used for 3

minutes daily.

* As the reserve power increases

while the shaver is being recharged,

the power reserve indicator LED

will ﬂash, and then one-by-one, the

LEDs will light from the bottom up, indicating that there is a power

reserve stored in the shaver.

Axis Air |14| english

Axis Air |15| english

* During this process, the recharge indicator LEDs will ﬂash to indicate

that recharging is in process.

Power reserve indicator LEDs (Green))

> During recharging: The LEDs ﬂash, and then remain lit up and then

one-by-one, the LEDs will light from the bottom up to indicate the

level of power reserved.

> After full charge: All the LEDs remain lit up.

low battery

LED indicator

Slide-

and-Lock

TM

on/off

Lite-and-

Fade

TM

LEDs

Axis Air |16| english

Axis Air |17| english

> While shaving: The LEDs light up and go out one after another

repeatedly.

Recharge indicator LED (Red fade LED)

> When recharging is necessary: Flashes.

> During recharging: Flashes.

> After full charge: Remains lit.

> While shaving: Flashes during

corded shave, and remains

unlit during cordless shave.

Before recharging the shaver,

check that both the plug and the

outlet are securely attached to

prevent any possible malfunc-

tion.

Axis Air |18| english

Axis Air |19| english

While the shaver is recharging, a small continuous noise may be heard

or the shaver body or the AC adaptor may build up and emit some

heat. This is not a malfunction.

After recharging

> After the shaver is recharged for approximately 1 hour, all the power

reserve indicator LEDs and the recharge indicator LED will remain lit

up, indicating that the shaver is fully charged.

> After recharging, be sure to pull out the power cord plug of the AC

adaptor from the outlet.

* When unplugging the AC adaptor, do not pull the power cord,

as this may cause a malfunction. Be sure to hold the plug when pulling

it out.

USING YOUR SHAVER

WITH THE AC POWER SUPPLY

Checking to see that the power switch is off, insert the power cord of

the AC adaptor securely into the socket at the bottom of the shaver,

and then, insert the outlet plug into the outlet. Then, slide the power

switch on.

> With the shaver connected to the AC adapter, should the shaver not

operate by sliding the power switch on, the rechargeable battery is

completely depleted. In this case, slide the power switch off, allow

the shaver to charge for 1 minute, and then slide the power switch

back on again.

> After each use, make sure to slide the power switch off, and

then unplug the AC adapter from the outlet and from the shavers

recharging socket.

> If your environment is humid, such as a bathroom, do not use the

shaver with its AC power supply.

Axis Air |20| english

Axis Air |21| english

> Do not use soap or shaving foam around the AC power supply

when in use.

Note: The AC power stored in the rechargeable battery slowly de-

creases even when the shaver is connected with the AC power supply.

Recharge the shaver’s battery once every three (3) weeks to maintain

an optimal charge.

cover

Slide-and

-Lock

TM

on/off

BATTERY LIFE

If you recharge your shaver’s battery once a week, the life expectance

of your rechargeable battery is approximate 4 years. Recharging it

more frequently will shorten its lifespan, but battery life varies depend-

ing on usage and storage conditions. When you notice that you are

getting only 2 to 3 shaves per 1-hour recharge, it means that the

battery life is nearing its end. When you reach this time, contact the

retailer from whom you purchased this shaver. If the shaver is stored

and unused for prolonged periods, 6 months or more, the battery’s

capacity will deteriorate due to self-discharge. It is recommended that

the shaver be recharged at least

once every six (6) months when

not in use to maintain battery

charging capacity.

HOW TO USE

Always remember that if the

cover

power

switch

Slide-and-Lock

TM

on/off

Axis Air |22| english

Axis Air |23| english

outer foil is deformed or damaged for any reason, do not use it and

replace it immediately with a new one. Otherwise, you risk scratching

or irritating your face.

1. Remove the shaver’s cap, and slide down the power switch on.

Sliding down the power switch again will turn off the shaver. This is the

Lock-and-Slide feature.

2. Bring the outer foil of the shaver to your face and gently apply enough

pressure that your feel your beard being cut. Stretch the skin of your face

and move the shaver upwards against the grain of your beard.

trimming

blade

Rear Rizer

TM

Rear Rizer

TM

knob

> When shaving, be sure not to apply too much pressure between the

outer foil and skin on your face. Applying too much pressure can ir-

ritate your skin, as it may dull or damage the foil and wear the outer

foil out at a faster rate.

> When shaving delicate and harder to reach parts such as the chin or

neck, pull your skin tighter with your hand, and stroke upwards against

the grain of your beard. When shaving your neck, it is often beneﬁcial

to lift your face upwards.

3. To use the trimming blade, slide it upwards. The trimming blade vi-

brates equally with the inner blade.

4. To cut your sideburns, apply the

trimming blade to the skin lightly

at 90°angle, and move the shaver

gently downwards.

5. After use, turn the power switch

Axis Air |24| english

Axis Air |25| english

off and clean the shaver with the accessory brush.

Be sure to put the cap on after cleaning to protect

the blades.

*You can use soap or shaving foam with this shaver.

After every use with soap or shaving foam, be sure

to wash away the residues with water.

FINE mode

This mode is provided for shaving your upper and lower lips

1. ) Slide up the FINE mode switch to “FINE”. The outer foil for FINE

mode will be pushed up.

2. Gently bring the outer foil in contact with your upper or lower lip, and

shave slowly while stretching the skin to make your beard stand up.

CARE AND MAINTENANCE

Before cleaning the shaver, be sure that the AC adaptor is discon-

Flex-Foil

TM

hood

release button

Flex-Foil

TM

hood

release button

nected from the shaver.

Washing in water

1. Slide the power switch off, and

press the outer foil frame release

buttons on the sides at the same

time to remove the outer foil

frame.

2. Slide the power switch on, and

wash the blades in cold or luke-

warm water. After washing, slide

the power switch off, and wipe

them dry with a towel or cloth.

3. Place the shaver in an

open-air resting place to dry it

correct incorrect

Rear Rizer

TM

Axis Air |26| english

Axis Air |27| english

thoroughly.

4. Attach the outer foil frame securely to the body case, and be very

careful not to touch the outer foil.

It is recommended that inner blade be cleaned with the brush at least

once every three (3) washings.

Cleaning with the brush

1. Before cleaning your shaver, be sure to slide the power switch off,

and press both the outer foil frame release buttons on the side at the

same time to remove the outer foil frame.

2. Push the two outer foil unit release knobs inside the outer foil frame

from both sides with ﬁngers, and remove the outer foil unit.

3. You can clean the inside of the outer foil, the inside of the outer foil

unit, the inner blade and the body of the shaver with the accessory

brush.

* To remove the inner blade, pull it straight upwards.

* Do not touch the sharp edges of the blade portion of the inner blade.

* Do not press hard against the inner blade. Doing so may deform

or damage it, which typically produces a poor shave and an unusual

noise.

4. After cleaning, attach the outer foil unit securely to outer foil frame.

Make sure you do not touch the outer foil.

5. Then, attach the inner blade to the vibrator. Set the outer foil frame

securely to the body, and check that it is well secured on the body.

If the outer foil for FINE mode is in a pushed-up position, push its both

ends lightly to reset it in position, and then, reinstall the outer foil frame.

If the shaver is used with the outer foil frame incorrectly set to the

Axis Air |28| english

Axis Air |29| english

body, this will typically produce a poor shave and unusual sound.

Do not remove the outer foil from the outer foil unit.

6. Before cleaning the trimming blade, slide the power switch off.

Check that the trimming blade is not moving when cleaning it.

Notes: After cleaning the shaver, apply shaver oil (sold separately) to

Flex-Foil

TM

hood

screw

rear

panel

side

panel

screw

inner

cut-

Ni-Mh battery

inner case

shaver back

A B

the outer foil surface once every 3 uses. When the shaver has not

used for a long time, be sure to clean the outer foil, inner blade and

trimming blade, and apply shaver oil to the outer foil surface.

FOR RECYCLING THE Ni-Mh BATTERY

Never disassemble the shaver to remove the Ni-Mh battery except to

dispose of the shaver.

The Ni-Mh battery in your shaver is recyclable. When you dispose of the

shaver, please take care to remove the Ni-Mh battery and recycle it.

How to remove the Ni-Mh battery

> Turn on the power switch, and run the battery down until the in-

ner blade stops moving. If the shaver is disassembled before the

recharged electricity is depleted, it may cause a shock, catch ﬁre

and cause burns.

Axis Air |30| english

Axis Air |31| english

> Follow the procedure below to disassemble the shaver with a

screwdriver.

1. Remove the outer foil frame, outer foil frame and inner blade.

2. Loosen and remove the 4 screws on the top and bottom of the

body with a Phillips screwdriver. (See the illustration “A”.)

3. Remove the side and rear panels. (See the illustration “A”.)

4. Loosen and remove the 6 screws with a Phillips screwdriver, and

remove the rear case. (See the illustration “B”.)

5. Cut the lead wires, and take out the Ni-Mh battery from the inner

case, while taking care not to short-circuit the (+) and (–) terminals.

(See the illustration “B”.)

SPECIFICATIONS

> Power supply: Rechargeable battery/AC power supply

> Blade motion:

> Inner blade: Reciprocating

> Trimming blade: Reciprocating

> Rated voltage: AC 100 V – 240V

> Rated frequency: 50/60 Hz

> Rated current: 200 mA

> Rated time: 5 minutes

> Standard recharging time: 1 hour

> Battery: Ni-Mh cell (enclosed type), 2 pcs.

> Battery voltage: 1.2 V x 2

> Weight: 202 g

Axis Air |32| english

Axis Air |33| english

> Operating temperature range: 0° C – 40° C

* The above speciﬁcations are subject to change without prior notice

for product improvement.

ACCESSORY PARTS (SOLD SEPARATELY)

> It is recommended that the outer foil and inner blade be replaced at

the same time approximately every 1 and 2 years.

Ordering Replacement Parts

Please contact Axis / BPI at 1-877-263-9500 to order replacement

parts for your Axis shaver. Please refer to the following part number.

AA-2 Replacement Outer Foil Frame and Inner Cutters for Model

AX-5330

The above parts are available at the retailer from whom your shaver

was purchased.

If your shaver requires service

Call Axis at 1-877-263-9500. To assist us in serving you, please have

the model number and date of purchase for your shaver available.

1-YEAR LIMITED WARRANTY

AXIS / Bodyline Products International, Inc. (BPI) warrants that your

product, except as noted below, is on the date of purchase free from

defect in material and workmanship for a period of one year. In the

event of a defect in material or workmanship, AXIS / BPI will repair or

replace this product with new parts, free of charge as follows:

1. The warranty is extended only to the original purchaser. A purchase

receipt or other proof of date of the original purchase is required for

service and parts replacement under this warranty.

2. Do not return the product to the retailer from whom this product

was purchased.

Axis Air |34| english

3. Contact AXIS / BPI toll-free at 1-877-263-9500 to obtain autho-

rization during the warranty period to return the defective product by

mail, postage prepaid.

LIMITATIONS AND EXCLUSIONS

There are no express warranties except as listed above.

This warranty only covers failures due to defects in materials or work-

manship that occur during normal use. It does not cover foils, blades,

cutters, or attachments or damage that occurs in shipment, or failures

that are caused by products not supplied by AXIS / Bodyline Products

International, Inc., or failures that result from accident, misuse, abuse, and

neglect from mishandling, misapplication, improper maintenance, im-

proper cleaning, alteration, modiﬁcation, line power surge, or commercial

use of the product, such as hotel, ofﬁce or rental use of the product, or

service by anyone other than AXIS / Bodyline Products International, Inc.,

or damage that is attributable to acts of God.

Félicitations!

Vous êtes maintenant

l’heureux propriétaire d’un

rasoir Axis AX-5330 re-

chargeable ou fonction-

nant sur secteur courant

alternatif (CA).

Avant d’utiliser votre rasoir,

veuillez lire attentivement

les instructions de ce

manuel d’emploi pour une

bonne utilisation et un bon

entretien du rasoir. Veuillez

garder le manuel à portée

de main pour toute ré-

férence.

Axis Air |36| Francais

Axis Air |37| Francais

INSTRUCTIONS

IMPORTANTES

CONCERNANT VOTRE

SÉCURITÉ.

Il est nécessaire de toujours observer certaines précautions élémen-

taries en utilisant un appareil électrique.

Veuillez lire attentivement toutes ces instructions

avant d’utiliser votre nouveau rasior.

DANGER

Pour limiter les risques d’électrocution...

1. NE JAMAIS RÉCUPÉRER un rasoir une fois tombé à l’eau. Deb-

rancher l’appareil immédiatement.

2. NE PAS UTILISER le rasoir dans le bain ou sous la douche.

3. DÉBRANCHER TOUJOURS le rasoir après l’emploi ou avant de le

nettoyer, sauf s’il est en cours de chargement.

4. NE PAS METTRE OU RANGER le rasoir dans de l’eau ou tout autre

liquide, ou encore dans un lieu d’où il peut accidentellement tomber ou

être amené dans l’eau. Appelez 1-877-263-9500 pour tout service

apres-vente.

AVERTISSEMENT

Pour eviter toute brulure, danger d’incedie, electrocution ou autre...

1. Ne jamais laisser le rasoir branche sans surveillance sauf lors de

son chargement.

Axis Air |38| Francais

Axis Air |39| Francais

2. Assurer toujours un etroite surveillance si le rasoir est utilise en

presence d’enfants ou de personnes handicapees.

3. Suivez attentivement toutes les instructions de ce manuel. Ne pas

utliser d’accessoires qui ne sont pas spéciﬁquement recommandés

par avec le rasoir.

4. Ne pas utiliser l’appareil s’il ne fonctionne pas normalement, a

été immergé dans de l’eau ou toute autre liquide, ou si le cordon

d’alimentation ou la prise sont endommagés. Appelez 1-877-263-

9500 pour tout service apres-vente.

5. Ne jamais utlitiser le rasoir en plein air. Éviter d’utiliser à proximité

d’aérosols ou en cas d’adminitration d’oxygène. Toujours garder le

cordon d’alimentation éloigné des surfaces chaffées.

6. Por brancher le rasoir raccorder déjà le cordon d’alimentation à

l’appareil avante de la brancher dans une prise électrique. Avante de

débrancher l’appareil, vériﬁer qu’il est sur arrêt, débrancher le cordon

d’alimentation de la prise électrique, puis retirer le cordon du rasoir.

7. Ne pas insérer de corps étrangers dans les oriﬁces de l’appareil.

8. Ne jamais ranger le rasoir sans avoir désolidarisé le cordon.

9. Ranger le rasoir et le cordon d’alimentation dans un lieu sec.

10. Éviter d’exposer l’appareil à la lumière directe du soileil ou à une

températrure ambiante supérieure à 60 degrés C.

11. Pour éviter toute blessure au visage, ne pas utiliser l’appareil si les

lames ou les têtes ont été endommagées.

12. Ne jamais enrouler le cordon d’alimentation autour de l’appareil

sous peine de l’endommager.

13. Ce rasoir est conçu et destiné à être utilisé sur les poils du visage

uniquement.

14. Ne jamais débrancher ou brancher le rasoir ayant les mains

La page charge ...

Bodyline Products International AX-5330 Manuel utilisateur

Ce manuel convient également à

Bodyline Products International AX-5330 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents