Omcan MM-IT-0080 Manuel utilisateur
- Catégorie
- Pistolets à chaleur
- Taper
- Manuel utilisateur
Electrical Meat Mixers
Models MM-IT-0080, 0120
Items 37450, 37451
Instruction Manual
Revised - 10/19/2021
Toll Free: 1-800-465-0234
Fax: 905-607-0234
Email: [email protected]
www.omcan.com
2
Page
--------------------------------------------------------------------------- 3 - 4
--------------------------------------------------------------------------- 4 - 6
-------------------------------------------------------------------------- 6
-------------------------------------------------------------------------------------------- 7
----------------------------------------------------------------------------------------- 8 - 9
--------------------------------------------------------------------------------- 10 - 12
----------------------------------------------------------------------------------- 12
---------------------------------------------------------------------------- 13 - 16
---------------------------------------------------------------------- 17 - 18
---------------------------------------------------------------------------- 19
Table of Contents
Section
General Information
Safety and Warranty
Technical Specications
Installation
Operation
Maintenance
Troubleshooting
Parts Breakdown
Electrical Schematics
Warranty Registration
Model MM-IT-0080 / Model MM-IT-0120
3
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan
and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or
negligent use of this equipment. The product shall only be operated by someone over the age of 18, of
sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct
operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the
machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of
the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the
external packaging, open carton to ensure all ordered items are within the box, and there is no concealed
damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),
please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may
initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be
lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse
for damaged products that were shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all operation and safety
instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save
these instructions for future reference. Also save the original box and packaging for shipping the
equipment if servicing or returning of the machine is required.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et
Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne
ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de
plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour
utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication
de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine
ou des personnes à proximité de la machine pendant son fonctionnement.
VÉRIFIEZ LE COLIS DÈS RÉCEPTION
Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage
n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés
sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises
manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant
d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager
une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine
doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents
d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli
par un tiers transporteur.
4
Safety and Warranty
PROTECTIONS AND SAFETY FEATURES
ATTENTION
Before using the appliance make sure the safety protections are in their correct position and intact. Check they
function correctly before starting work (at the beginning of a new work shift). If there are problems contact the
maintenance team.
Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations
et les consignes de sécurité.
Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces
instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour
l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.
---------------------------------------------------------------------------------------------------------------------------------------------------
Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba
Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona
inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona
mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido
entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.
Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la
máquina mientras esta en el funcionamiento.
REVISE EL PAQUETE A SU LLEGADA
Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el
empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la
caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes
o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro
de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre
los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se
muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron
a recoger por terceros.
Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de
funcionamiento y seguridad.
Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para
salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el
envío del equipo si servicio técnico o devolución de la máquina que se requiere.
General Information
5
Safety and Warranty
1. Rotor protection grille.
This safety feature impedes incidental contact with the rotor.
2. Micro-switch.
3. Knob to lock tank.
4. Ball grip for locking the rotor in position.
ATTENTION!
Do Not for any reason tamper with the safety features.
DANGER AND WARNING NOTICES
ATTENTION
When the appliance is connected to the electricity supply do not touch any
of the electronics. There is the risk of being electrocuted. Always respect the
information given on the warning notices. Non-observance can cause injuries
or even death. Make sure the warning notices are always in their correct
position and are legible. If for some reason they are missing or are illegible x them to the appliance or replace
them.
NON-PERMITTED USES
The mixer must only be used for the uses given by the manufacturer, and in particular:
• Do Not use the appliance for mixing food other than for meat.
• Do Not use the appliance if it has not been correctly installed with all the protections correctly mounted
avoiding any hazardous risk of injury.
• Do Not touch any of the electrical parts without having rst disconnected the appliance from the electricity
supply: there is risk of electrocution.
• Do Not mix quantities that cannot be contained in the mixing drum.
• Do Not wear clothing that does not conform with the accident prevention regulations. Ask your employer
regarding safety regulations and accident prevention clothing.
• Do Not turn on the appliance if faulty or out of service. Before using the appliance make sure any
hazardous working conditions have been eliminated. If there is a fault or problem with the appliance
immediately turn it off and inform the maintenance team.
• Do Not permit unauthorized staff to use the appliance. In case of an electrical accident the rst thing to do
is to pull the injured worker away from the appliance (normally in this situation the worker is unconscious).
However, be very careful as this is very dangerous. The injured worker in this situation is an electricity
conductor and touching him / her means being electrocuted. It is important to disconnect the electricity
supply by disconnecting the fuse box and if this is not possible use an insulated object or material (wooden
or PVC stick, fabric, leather, etc...) to pull the injured worker away. Immediately call the nearest casualty
department so the injured worker is admitted to hospital for treatment.
• Do Not use the appliance in environments where there is gas in the atmosphere creating a high risk of
combustion (explosion).
• Do Not repair the appliance without prior authorization.
• Always Respect the procedures for maintenance and technical assistance.
6
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as
possible.
1 YEAR PARTS AND LABOUR WARRANTY
Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized
service technician to repair the equipment locally.
Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not
improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classied as normal solid urban waste and can therefore be disposed of
without difculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Model MM-IT-0080 MM-IT-0120
Power 550 W / 0.75 HP (x2) 735 W / 1 HP (x2)
Electrical 220V / 60Hz / 1 220V / 60Hz / 3
Tank Dimensions 24” x 20” / 610 x 508mm 26” x 21.7” / 660 x 551mm
Capacity 110 L / 80 kgs. 163 L / 120 kgs.
Dimensions 25” x 39” x 41” / 635 x 991 x 1041mm 27.6” x 43” x 40.5” / 701 x 1092 x 1029mm
Weight 198 lbs. / 90 kgs. 304.2 lbs. / 138 kgs.
Packaging
Dimensions 47” x 26” x 51” / 1194 x 660 x 1295mm 29.5” x 57” x 51.2” / 749 x 1448 x 1300mm
Packaging Weight 242.5 lbs. / 110 kgs. 368.2 lbs. / 167 kgs.
Item Number 37450 37451
Safety and Warranty
Technical Specications
7
Installation
ATTENTION!
The work surface or area where the appliance is to be installed must be horizontal and solid guaranteeing
stability and safety. When installing the appliance bear in mind that amp space must be left around the
appliance. This space allows you to work freely with the appliance and allows easy access when servicing or
repairing it. Provide suitable lighting around the appliance for the worker using the meat mixer.
INSTALLING
To move the package use a fork-lift truck or similar means. The appliance is in a carton box and packed on a
pallet.
• Remove the two plastic straps that hold the carton box to the pallet.
• Remove the carton box.
• Remove the cellophane wrapping and any other packaging materials.
DISPOSING OF PACKAGING
Packaging materials such as carton, nylon and wood are all products considered normal urban waste. These
materials can be disposed of as per normal procedures. If the appliance is destined to countries where there
are specic waste laws, dispose of packaging conforming with the local laws in force.
HANDLING APPLIANCE
As the following models 50 - 120 M/B 50 - 120 - 80 - 180 BA have wheels they can be manually moved by
pulling
CONNECTING TO ELECTRICITY SUPPLY
ATTENTION!
Check the electricity supply corresponds to the value given on the appliance ID plate. Electrical works can
only be carried out by specialised and authorized staff with prior authorisation by the person in charge of the
appliance. Connect the appliance to a circuit provided with an efcient earth socket. If necessary use suitable
extension leads guaranteeing safety. The section (thickness) of the extension lead must be greater than the
appliance power supply cable. This avoids any hazardous overheating. Avoid pulling or twisting the power
cable as this can damage the internal wires.
8
Operation
LIST OF CONTROLS AND INDICATORS
CONTROL PANEL
1. Stop button.
- Black.
- Press to stop rotor motor.
2. Light indicator for tension.
- Green.
- Indicates power supply. On the stop button marked with “1” it is green and remains lit when the appliance
has power.
3. Start button.
- Grey.
- Press for starting the rotor.
4. Push button for inverting rotation.
- Grey.
- Press to invert rotation in the opposite direction to push button “3”.
5. Light indicators rotor in movement.
- Red / yellow-colored.
- Indicates that the rotor is in movement. This indicator is located near start push button “3”, and near push
button for inverting rotation “4”. It is red and lights up when the rotor command is given.
STAINLESS STEEL CONTROLS
1. Drive push-button (continuous).
- In stainless steel.
- Press to start the blade.
2. Stop push-button.
- Press to stop the propeller transmission motor.
3. Reverse drive push-button.
- In stainless steel.
- Press to start the blade in opposite direction to pus-button “1”.
4. Network presence indicator light.
9
Operation
- Signals that the machine is connected to the electrical network.
5. Drive indicator light.
- Signals that the tool of the machine is in movement.
- Located close to the start push-button “3” and close to the reverse drive push-button “3”.
- Visible only when the control is operating.
TURNING THE APPLIANCE ON AND OFF
CHECKING CONNECTION TO ELECTRICITY SUPPLY
Switch the on/off switch on the appliance to position “I”. The green light “2”
should come on, indicating power on. Press push button “3” for starting, the
red indicator light “5” should come on, and then immediately press push button
“1” for stopping. This is to check that the appliance works correctly. Press push
button “4” for starting, the red indicator light “6” should come on, and then
immediately press push button “1” for stopping. This is to check that the rotor
rotates in an opposite direction to push button “3”.
CHECKING PROTECTIONS AND SAFETY FEATURES AND THEIR EFFICIENCY
1. Rotor Protection grille.
Visually check that the protection grille is intact.
2. Micro-switch.
With the appliance running, check that it automatically stops when the protection grille is raised. If this is
not the case contact you local authorised dealer or the manufacturer.
ATTENTION!
If the previously mentioned safety protections and casing are not intact, are damaged, missing or work
incorrectly, turn the appliance off and contact the aftersales assistance to repair the appliance.
TURNING ON THE APPLIANCE
Switch the power on/off switch from position “0” to “1”. Indicator “2” should light up indicating power on. Press
push button “3” for starting the rotor.
TURNING OFF THE APPLIANCE
To stop the appliance press push button “1” (stops the electric motor), the red indicator light “5” will go out.
Indicator light “2” will remain on indicating power on. Switch the power on/off switch to position “0” turning off
the power supply.
INVERSION
To invert rotor rotation press push button “4”.
Note: When a work shift is over always switch the on/off power switch to position “0”.
10
Maintenance
EMPTYING AND CLEANING
EMPTYING THE MIXING BOWL
Turn off the mixer, the on/off switch is in position “0” unplug from main power
supply. The mixing bowl is designed to rotate to facilitate emptying.
• With the bowl in a horizontal position grip the handle on the bowl titling bar.
• Pull the tank locking knob.
• Once having released the mixing bowl rotate by pulling the tilting bar.
• Open the protection grille and empty the bowl.
CLEANING THE MIXING BOWL
With the machine off and switch in position “0” and with the plug removed from
the socket proceed with cleaning the bowl. Thanks to the possibility of rotating
the bowl cleaning operations are facilitated.
• With the bowl in a horizontal position grip the handle on the bowl titling bar
(1).
• Unhook and remove the pins which lock the mixing blades (2) in position.
• Unscrew the bowl locking knob (3) anti-clockwise.
• Once having released the mixing bowl rotate by pulling the tilting bar (1).
• Open the grille (4) and proceed with removing the mixing blades.
• Make sure the mixing blades are positioned to allow for enough space to
remove them.
• Grip the mixing blades one at a time (5) and pull outwards to remove.
• The surface is now smooth and easy to clean, clean the mixer thoroughly
and if necessary disinfect.
• With a sponge soaked with water and a neutral (pH 7) and non-toxic
degreaser (food grade) clean and remove any food product left on the mixer
and on the mixing blades. Do not use petrol, solvents or other ammable
liquids as detergents; only used authorised non-toxic and non-ammable
solvents. Take all the necessary precautions adopting also appropriate
protections required for the cleaning product being used when cleaning
and disinfecting the mixer. Always follow the instructions provided for the
cleaning product being used.
• To mount the mixing blades after cleaning, simply reverse the above steps.
CLEANING THE APPLIANCE
At the end of the work shift the appliance must be carefully cleaned and
disinfected.
• Stop the appliance and switch the on/off switch to “0” and remove the power
plug.
• With a sponge soaked with water and suitable neutral degreasers (non-toxic) remove and clean any traces
of food.
Do not use petrol, solvents or other inammable liquids such as detergents. Use authorised non-toxic and non-
inammable solvents.
Take suitable precautions when cleaning considering the products being used. Always follow the instructions
11
Maintenance
for use given.
ATTENTION!
The mixer must always be off and the power plug removed from the power socket when servicing and
cleaning. The maintenance area must always be clean, dry and well illuminated. Do not allow unauthorized
staff to service the appliance. Do not put parts of your body, hands or arms into the mixer or openings not
protected where there is the risk of being injured. Always use protective clothing (suitable gloves, glasses etc.)
Do not use petrol, solvents or other inammable liquids such as detergents. Use authorised non-toxic and
non-inammable solvents. Do not compressed air to clean the appliance. If it is considered necessary to use
compressed air, use eye protection (glasses) with side protections and limit pressure to a max of 2 atm. (1,9
bar). Do not use a naked ame as lighting when servicing and repairing the appliance.
MAINTENANCE CHECKS
CHECKS AND TESTS TO BE CARRIED OUT WHEN INSTALLING
To make sure the appliance has not been damaged when delivered or when being installed, carry out the
following tests;
BEFORE SETTING TO WORK:
• Check that the power supply tension corresponds to the value given on the ID plate.
• Check that there are all the warning and ID plates and that they are not damaged.
• Check that the power supply cable is not damaged and is intact.
• Check that the safety features such as the magnetic sensors are intact and not damaged.
FUNCTIONAL CHECKS WITH THE APPLIANCE RUNNING:
• Check the efciency of the protections and safety features. There is the possibility that during transport
these have been damaged or are out of adjustment.
• Carry out several functional tests using pieces of food that are the same size that will be used in normal
working conditions.
PERIODICAL CONTROLS
To maintain reliability and performance in time, as well as proceeding as indicated, it is necessary to carry out
regular tests and checks as follows:
BEFORE EACH WORK SHIFT:
• Every day check safety features and protections work correctly.
• Check the power cable is intact.
THE END OF THE WORK SHIFT:
• Carefully clean the appliance removing any traces of food.
• Remove, clean and mount rotor and blades.
12
Maintenance
Troubleshooting
LUBRICATION
Periodically grease gears (2).
• Unplug the machine from its power source.
• Take off the protective casing (1).
• Grease the gears using a brush.
• Reassemble the casing and fasten the screws.
The oil in the transmission reduction gears is long-life and does not need to be ever replaced.
Problem Cause Remedy
The appliance does not start. The on/off switch is in position “0”. Switch the switch to position “1”.
The grill is raised. Lower the grill.
The microswitch mounted on the
mixing drum does not work.
Contact Omcan.
Either the electric motor or the
command circuit board is faulty.
Contact Omcan.
The controls do not work or the
blades do not change direction.
Contact Omcan.
13
Parts Breakdown
Model MM-IT-0080 37450
14
Parts Breakdown
Item No. Description Position Item No. Description Position Item No. Description Position
AG284 Cable 3x1.5 for 37450 1 61579 Mobile Wheel with Brake D 100 C/Perno
for 37450 29 62643 Flat Washer Din 125 D6 for 37450 55
62602 Power Lead Motor TF/1.5 for 37450 2 78634 Knob for 37450 30 62644 Flat Washer Din 125 D8 for 37450 56
AE729 Power Cable TF TC BZ Engine for 37450 3 AG291 Mot. Pam 71 B 14 4 Poli V.230/60 for
37450 31 62645 Flat Washer Din 125 D10 for 37450 57
61604 Strain Relief + Nut for 37450 4 61590 Washer SO 1650 INOX for 37450 32 62646 Elastic Spine Din 1481 3x18 for 37450 58
61603 Nut Ott.Nich.PG 11 for 37450 5 61587 Door Support for Microswitch for 37450 33 62647 Elastic Pin Din 1481 5x20 for 37450 59
62605 Plastic Cable Gland PG7 for 37450 6 61569 Boat Stops Crade for 37450 34 62648 Blind Nut Din 1587 M5 for 37450 60
AG286 Plastic Nut PG 7 for 37450 6A 61571 Spring for 37450 35 61583 Nut Din 1587 M6 for 37450 61
62606 PG 11 Plastic Cable Gland for 37450 7 61570 Pin for 37450 36 62650 P Nut Din 1587 M8 for 37450 62
AG287 Plastic Nut PG 11 for 37450 7A 61564 Lever Rod for Container Overturning
for 37450 37 62651 Blind Nut Din 1587 M12 for 37450 63
62607 Essacavo + Dado Plastica PG for 37450 8 AC923 Female Blade for 37450 38 62652 Nut ES. Din 439 M10 Low for 37450 64
AG288 Plastic Nut PG 13.5 for 37450 8A 62628 Male Blade for 37450 39 62653 Feathers Din 6885 / A 8x7x28 for 37450 65
61549 Box GW 44207 for 37450 9 61563 Blade Rod for 37450 40 62654 Feathers Din 6885 / AB 8x7x16 for
37450 66
61608 Terminal Comb. BZ for 37450 10 AI265 Cot INOX ME 80 Evo Bialb for 37450 41 62655 Screw TBEI ISO 7380 M6x25 for 37450 67
37258 Microswitch SO INOX for 37450 11 AI266 Bathtube Lid ME 80 Evo Bialb for 37450 42 AE740 Screw Autof.TC + Din 7981 D 3.5x16
for 37450 68
37260 Magnet M634 for 37450 12 62631 Carter Motore ME 80 Evo Bialb for 37450 43 62657 Screw TSPEI Din 7991 M8x20 for 37450 69
AE730 Mascher. Three Puls. Acc. TC-ME H =
36 for 37450 13 62632 Fascia Carter Mot. ME 80 Evo Bialb
for 37450 44 62658 Screw TSPEI Din 7991 M8x30 for 37450 70
60396 Stainless Steel On Button with Lamp
for 37450 14 AG299 Base DX Rid. ME 80 Evo Bialb for 37450 45 AG301 Screw TSPEI DIN 7991 M6x16 for 37450 71
60397 Stainless Steel Off Button for 37450 15 AG300 Base SX ME 80 Evo Bialb for 37450 46 62660 Washer F Wide Din 9021 D6x18 for
37450 72
41224 Circuit Board R3+Autom EQ for 37450 16 62635 Tubo Unione Basi ME 80 Evo Bialb for
37450 47 62661 Hex.Socket Head Cap Screw M6x20
for 37450 73
61586 Bearing 6205 ZZ for 37450 17 61592 Flange Support ME 80 Evo Bialb for
37450 48 62662 Screw TE Din 933 M8x16 T.F. for 37450 74
61597 Bearing Reg. SP 7205 ME 80 EVO for
37450 18 61605 Ring Gear ME 80 Evo for 37450 49 62663 X.Screw Din 933 M8x20 for 37450 75
61589 Cap 40/7/C Pulley 1C SO1650 for 37450 19 62638 Staffa Blocco Riduttori ME 80 Evo for
37450 50 62664 Screw TE Din 933 M10x20 T.F. for 37450 76
61596 Gasket 40-62-7 for 37450 20 62670 B Overload Protection EQ for 37450 50A 62665 Screw TE Din 933 M12x30 T.F. for 37450 77
61610 Zinc Washer M8x30 H4 for 37450 21 62639 Ridut. CM50 71 B14 Evo Bialb for 37450 51 62666 Hex.Nut Din 934 M8 for 37450 78
AG289 Dist. Rid-Corona SP47 ME EVO LAV.
for 37450 22 60080 Screw Poeliers M5x12 for 37450 51A 62667 Flathead CSK Screw Din 963 M5x25
for 37450 79
61609 Door Screw 10x6x4 ME BA EVO for
37450 24 61585 Shaft Support SX Evo Bialb for 37450 52 62668 Self-Lock Nut ES Din 982 M6 High for
37450 80
62621 Bush Flang. JFM-1622-12 TCM-ME
for 37450 25 60079 Self-Locking Nut ES Din 982 M5 High
for 37450 52A 62669 Poeliers M4x10 Screw for 37450 81
66642 Handle - New Style for 37450 26 61595 Transc. Pin Femm L = 220 M and 120
Evo for 37450 53 AG302 16 UF Capacitor for 37450 90
79656 Knob for Fixing Container for 37450 27 AE738 Din Guide Omega H.7mm L = 20mm
for 37450 53A
61556 Stainless Steel Non-Swivel.Caster D.100
for 37450 28 61598 Transc. Pin Masc L = 220 ME 120 Evo
for 37450 54
Model MM-IT-0080 37450
15
Parts Breakdown
Model MM-IT-0120 37451
16
Item No. Description Position Item No. Description Position Item No. Description Position
61577 Cradle INOX ME 120 EVO BIALB for
37451 1 61584 Carter Band MOT. ME 120 EVO BIALB
for 37451 19 61597 Bearing Reg. SP 7205 ME 80 EVO
for 37451 40
61578 Tank Cover ME 120 EVO BIALB for
37451 2 61585 Shaft Support SX EVO BIALB for 37451 20 61598 Transc. Pin MASC L = 220 ME 120 EVO
for 37451 42
61579 Mobile Wheel with Brake D 100 C/Perno
for 37451 3 61586 Bearing 6205 ZZ for 37451 21 61599 Base SX ME 120 EVO BIALB for 37451 43
61556 Stainless Steel Non-Swivel Caster D.100
for 37451 4 61549 Box GW 44207 for 37451 22 61600 Base DX RID. ME 120 EVO BIALB for
37451 44
61580 Paddle Female IX ME 120 KG Bialbero
for 37451 5 41224 Circuit Board R3+AUTOM EQ for 37451 23 61601 Tube Union Bases ME 120 EVO BIALB
for 37451 45
61581 Paddle Male IX ME 120 KG Bialbero
for 37451 6 61587 Door Support for Microswitch for 37451 25 61561 Switch for PCB for 37451 48
18961 Handle for 37451 8 37258 Microswitch SO INOX for 37451 26 37179 Gasket for Round Control Panel C6-C9
P-802 for 37451 49
61564 Lever Rod for Container Overturning
for 37451 9 61588 Motor Cover ME 120 EVO BIALB for
37451 27 61602 Cable and Plug CEE 3P + T. for 37451 50
78634 Knob for 37451 10 61589 Cap 40/7/C Pulley 1C SO1650 for 37451 28 61604 Strain Relief + Nut for 37451 51
61569 Boat Stops Crade for 37451 11 61590 Washer for Bone Saw SO 1650 INOX
for 37451 29 61603 Nut OTT.NICH.PG 11 for 37451 51 A
79656 Knob for Fixing Container IP 50-100
for 37451 12 61591 Paddle Rod IX ME 120 KG Bialbero for
37451 31 61605 Ring Gear ME 80 EVO for 37451 53
61571 Spring for 37451 14 61592 Flange Support ME 80 EVO BIALB for
37451 33 61606 Bracket Lock Gear ME 120 EVO for
37451 55
61570 Pin for 37451 15 61593 Gear Box MRV 063 B14 R=49 for 37451 35 61607 Bushing ME 80 EVO for 37451 57
37260 Magnet M634 for 37451 16 61594 MOT. PAM 80 B 14 4 POLI TRIF ME EVO
for 37451 36 61608 Terminal Comb BZ for 37451 58
61582 Screw TSP TORX DIN 7991 M 6x12
TX30 for 37451 17 61595 TRANSC. Pin FEMM L = 220 M and 120
EVO for 37451 37 61609 Door Screw 10x6x4 ME BA EVO for
37451 59
61583 Nut DIN 1587 M 6 for 37451 18 61596 Gasket 40-62-7 for Mincer for 37451 39 61610 Zinc Washer M8x30 H4 for 37451 100
Model MM-IT-0120 37451
Parts Breakdown
17
Electrical Schematics
Model MM-IT-0080 37450
18
Model MM-IT-0120 37451
Electrical Schematics
19
Warranty Registration
Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,
cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:
Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la
carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at
the perforation and then send to the address specied below. You can also register online by visiting:
OMCAN
PRODUCT WARRANTY REGISTRATION
3115 Pepper Mill Court,
Mississauga, Ontario
Canada, L5L 4X5
https://omcan.com/warranty-registration/
or email to: [email protected]
Purchaser’s Information
Name: Company Name:
Address:
Telephone:
City: Province or State: Postal or Zip: Email Address:
Country: Type of Company:
Restaurant Bakery Deli
Dealer from which Purchased: Butcher Supermarket Caterer
Dealer City: Dealer Province or State: Institution (specify):
Invoice: Other (specify):
Model Name: Model Number: Serial Number:
Machine Description:
Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):
Would you like to extend the warranty? Yes No
Por correo en Canadá
Pour postale au Canada
For mailing in Canada
Por correo en los EE.UU.
Pour diffusion aux États-Unis
For mailing in the US
OMCAN
PRODUCT WARRANTY REGISTRATION
4450 Witmer Industrial Estates, Unit 4,
Niagara Falls, New York
USA, 14305
Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North
American food service industry. Our success over these many years can be attributed to our commitment
to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Today with partners in North America, Europe, Asia and South America, we continually work to improve
and grow the company. We strive to offer customers exceptional value through our qualied local sales
and service representatives who provide convenient access to over 5,000 globally sourced products.
Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et
matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces
nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles
et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en
Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et
développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à
nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000
produits provenant du monde entier.
Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros
de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir
a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos
clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan
continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor
excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un
fácil acceso a más de 5,000 productos con origen a nivel mundial.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Omcan MM-IT-0080 Manuel utilisateur
- Catégorie
- Pistolets à chaleur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Omcan MM-IT-0080 User manual
Documents connexes
-
Omcan DI-CN-0099 Manuel utilisateur
-
Omcan MG-IT-0032 Manuel utilisateur
-
Omcan MX-CN-0127 Manuel utilisateur
-
Omcan FP-CN-0200 Manuel utilisateur
-
Omcan BE-CN-2083-CSS Manuel utilisateur
-
Omcan TS-IT-0150 Manuel utilisateur
-
Omcan BS-CN-1651-T Manuel utilisateur
-
Omcan FS-US-0246 Manuel utilisateur
-
Omcan 24242 Manuel utilisateur
-
Omcan DW-CN-0902 Manuel utilisateur