Omcan MX-CN-0127 Manuel utilisateur

General Purpose Mixer

Model MX-CN-0127

Item 27767

Instruction Manual

Revised - 06/07/2021

Toll Free: 1-800-465-0234

Fax: 905-607-0234

Email: [email protected]

www.omcan.com

2

Page

--------------------------------------------------------------------------- 3 - 4

--------------------------------------------------------------------------- 4 - 5

-------------------------------------------------------------------------- 6

--------------------------------------------------------------------------------------------- 6

----------------------------------------------------------------------------------------- 7

------------------------------------------------------------------------------------- 7

------------------------------------------------------------------------------ 8

----------------------------------------------------------------------------- 9 - 15

---------------------------------------------------------------------------- 16

------------------------------------------------------------------------------------------- 17 - 18

---------------------------------------------------------------------------- 19

Table of Contents

Section

General Information

Safety and Warranty

Technical Specications

Operation

Maintenance

Troubleshooting

Mixer Capacity Chart

Parts Breakdown

Electrical Schematics

Notes

Warranty Registration

Model MX-CN-0127

3

General Information

Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan

and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or

negligent use of this equipment. The product shall only be operated by someone over the age of 18, of

sound mind, and not under the inuence of any drugs or alcohol, who has been trained in the correct

operation of this machine, and is wearing authorized, proper safety clothing. Any modication to the

machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of

the machine while in operation.

CHECK PACKAGE UPON ARRIVAL

Upon receipt of an Omcan shipment please inspect for external damage. If no damage is evident on the

external packaging, open carton to ensure all ordered items are within the box, and there is no concealed

damage to the machine. If the package has suffered rough handling, bumps or damage (visible or concealed),

please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may

initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be

lled out within three days, from the delivery date shown in the shipping documents. Omcan has no recourse

for damaged products that were shipped collect or third party.

Before operating any equipment, always read and familiarize yourself with all operation and safety

instructions.

Omcan would like to thank you for purchasing this machine. It’s of the utmost importance to save

these instructions for future reference. Also save the original box and packaging for shipping the

equipment if servicing or returning of the machine is required.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Fabrication et distribution Companie Limité et Food Machinery d’Amerique, dba Omcan et

Omcan Inc. ne sont pas responsables de tout dommage ou blessure causé du fait que toute personne

ait utilisé cet équipement de façon irrégulière. Le produit ne doit être exploité que par quelqu’un de

plus de 18 ans, saine d’esprit, et pas sous l’inuence d’une drogue ou d’acohol, qui a été formé pour

utiliser cette machine correctement, et est vêtu de vêtements de sécurité approprié. Toute modication

de la machine annule toute garantie, et peut causer un préjudice à des personnes utilisant la machine

ou des personnes à proximité de la machine pendant son fonctionnement.

VÉRIFIEZ LE COLIS DÈS RÉCEPTION

Dès réception d’une expédition d’Omcan veuillez inspecter pour dommages externes. Si aucun dommage

n’est visible sur l’emballage externe, ouvrez le carton an de s’assurer que tous les éléments commandés

sont dans la boîte, et il n’y a aucun dommage dissimulé à la machine. Si le colis n’a subi aucune mauvaises

manipulations, de bosses ou de dommages (visible ou cachée), notez-le sur le bond de livraison avant

d’accepter la livraison et contactez Omcan dans les 24 heures qui suivent, pour que nous puissions engager

une réclamation auprès du transporteur. Un rapport détaillé sur l’étendue des dommages causés à la machine

doit être rempli dans un délai de trois jours, à compter de la date de livraison indiquée dans les documents

d’expédition. Omcan n’a aucun droit de recours pour les produits endommagés qui ont été expédiées ou cueilli

par un tiers transporteur.

4

Safety and Warranty

General Information

IMPORTANT

• The mixer must have good protective grounding.

• Don’t operate the mixer beyond the required quantity. When the quantity of water is below 55%, please

reduce the our.

• Do not put the hand into the bowl when operating the mixer.

Avant d’utiliser n’importe quel équipement, toujours lire et vous familiariser avec toutes les opérations

et les consignes de sécurité.

Omcan voudrais vous remercier d’avoir choisi cette machine. Il est primordial de conserver ces

instructions pour une référence ultérieure. Également conservez la boîte originale et l’emballage pour

l’expédition de l’équipement si l’entretien ou le retour de la machine est nécessaire.

---------------------------------------------------------------------------------------------------------------------------------------------------

Omcan Empresa De Fabricacion Y Distribucion Inc. Y Maquinaria De Alimentos De America, Inc. dba

Omcan y Omcan Inc. no son responsables de ningun daño o perjuicío causado por cualquier persona

inadecuada o el uso descuidado de este equipo. El producto solo podra ser operado por una persona

mayor de 18 años, en su sano juicio y no bajo alguna inuencia de droga o alcohol, y que este ha sido

entrenado en el correcto funcionamiento de esta máquina, y ésta usando ropa apropiada y autorizada.

Cualquier modicación a la máquina anúla la garantía y puede causar daños a las personas usando la

máquina mientras esta en el funcionamiento.

REVISE EL PAQUETE A SU LLEGADA

Tras la recepcion de un envio Omcan favor inspeccionar daños externos. Si no hay daños evidentes en el

empaque exterior, Habra el carton para asegurararse que todos los articulos solicitados ésten dentro de la

caja y no encuentre daños ocultos en la máquina. Si el paquete ha sufrido un manejo de poco cuidado, golpes

o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro

de las 24 horas, de modo que podamos iniciar una reclamación con la compañia. Un informe detallado sobre

los daños causados a la máquina debe ser llenado en el plazo de tres días, desde la fecha de entrega que se

muestra en los documentos de envío. Omcan no tiene ningun recurso por productos dañados que se enviaron

a recoger por terceros.

Antes de utilizar cualquier equipo, siempre lea y familiarizarse con todas las instrucciones de

funcionamiento y seguridad.

Omcan le gustaría darle las gracias por la compra de esta máquina. Es de la mayor importancia para

salvar estas instrucciones para futuras consultas. Además, guarda la caja original y el embalaje para el

envío del equipo si servicio técnico o devolución de la máquina que se requiere.

5

Safety and Warranty

RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure

or other damages resulting from installation in non-commercial or residential applications. The right

is reserved to deny shipment for residential usage; if this occurs, you will be notied as soon as

possible.

1 YEAR PARTS AND LABOUR WARRANTY

Within the warranty period, contact Omcan Inc. at 1-800-465-0234 to schedule an Omcan authorized

service technician to repair the equipment locally.

Unauthorized maintenance will void the warranty. Warranty covers electrical and part failures, not

improper use.

Please see https://omcan.com/disclaimer for complete info.

WARNING:

The packaging components are classied as normal solid urban waste and can therefore be disposed of

without difculty.

In any case, for suitable recycling, we suggest disposing of the products separately (differentiated

waste) according to the current norms.

DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!

6

Operation

The machine has two controls: touch-panel control and manual-switch control.

TOUCH-PANEL CONTROL

• Put the materials into the bowl. Note that sufcient quantity is 55% of bowl volume with our and water.

• Automatic manner: switch on power supply; set 3-4 minutes at low speed, 7-8 minutes at high speed, and

press “manual/automatic switch” to automatic state (“AUTO” light became light on the panel). Then press

“ON” to turn on the machine, the machine will mix the our at one time.

• Manual manner: switch on power supply, press “manual/automatic switch” to manual state (“Manu” light

became light on the panel). Press “quack/slow switch” at low speed, and press “ON” switch to start mixing

at low speed, and to some extent, press “quick” mixing switch to complete mixing.

• Take out paste after mixing. If turn on the face guard during mixing, then the machines will stop rotating. In

this case, press “INCH” switch, then the machine can operate, and the paste can be taken out.

MANUAL-SWITCH CONTROL

The machine has manual switch at the left side, “1” is slow speed, “2” is quick speed. The switch can be turn

to the required speed when using, and press the button beside the switch. In the process of manual operation,

the power supply of panel is turn off. If you want to use it again, then switch on the power supply again.

The machine has slow or quick reversion function, and it can be used in blending the materials. When taking

out the paste, reversion function can’t be used in case of breaking the paste.

At any times, if happens some accidents, press “Emergency Button” to stop the machine quickly to prevent any

damage. The machine can be started again after nding out the reasons.

Technical Specications

Model MX-CN-0127

Power 2 kW - 3.7 kW / 2.7 HP - 5 HP

Shaft Speed 120 / 240 RPM

Bowl Speed 17 RPM

Bowl Capacity 120 L / 127 QT

Maximum Kneading

Capacity 82.6 lbs. / 37.5 kgs.

Electrical 220V / 60Hz / 3

Weight 1080.3 lbs. / 491 kgs.

Dimensions 47.6” x 28.3” x 56.3” / 1210 x 720 x 1430mm

Packaging Weight 1256.5 lbs. / 571.1 kgs.

Packaging Dimensions 49.2” x 30” x 65.6” / 1250 x 762 x 1665mm

Item Number 27767

7

Maintenance

Troubleshooting

Take out the paste after mixing; wipe the inside of bowl, newel and pole with clean water and cloth. And move

the unwanted materials above the bowl with clean cloth. Do not wash the below area of the machine.

• Wipe the panel with clean cloth with litter water; do not use toluene, gas, or any volatile cleaner to clean the

panel.

• Do not use nail or other hard things to press the button. Do not wash the panel and switch with water in

case of electric shock.

• Make sure the machine works in a stable position, if it has some shakes, then adjust the adjustable foot to

make the machine in stable.

• Put the food safe oil into every food safe oil hole in the bearing three months a time.

Problem Possible Cause Solution

The machine can’t start up No power. Check the power supply, whether

lose phase or not.

Burnt fuse. Check the fuse, if burnt, please

replace it.

The switch, emergency button or

other buttons are in the close or

open position.

Unplug the machine and place all

buttons in the off position.

The machine doesn’t work

normally.

The belt became exible and slips,

or the belt is broken.

Please adjust the belt, or replace

the belt.

8

Mixer Capacity Chart

Ingredients Dough for Making

Heavy Bread

Dough for Making

Medium-Weight Pizza

Dough for Making

Puffed Donut

Flour 100.0% 100.0% 100.0%

Water 55.0% 50.0% 65.0%

Yeast 2.0% 1.0% 5.0%

Salt 2.5% 1.5% 2.5%

Sugar 5.0% 0% 15.0%

Foam 5.0% 0% 15.0%

Oil 0% 2.0% 0%

Non-Fat Milk Powder 6.0% 0% 8.0%

In Total 175.5% 154.5% 210.5%

9

Parts Breakdown

Model MX-CN-0127 27767 Hook and Motor

10

Parts Breakdown

Model MX-CN-0127 27767 Bowl and Motor

11

Parts Breakdown

Model MX-CN-0127 27767 Body Components

12

Parts Breakdown

Model MX-CN-0127 27767 Guard

13

Parts Breakdown

Model MX-CN-0127 27767 Hook and Motor

Item No. Description Position Item No. Description Position Item No. Description Position

65298 220V/60HZ/3 Motor and Flat Key 10

for 27767 1+2 65303 Hex Bolt M12x35 for 27767 15 28663 Bearing 33210-Z for 27767 28

65299 Setting Board for Motor for 27767 3 25047 Spacer for 27767 16 65315 Clamp Plate 60/88x10 for 27767 29

65300 Bolts M12x120 for 27767 4 25030 Spring Washers for 27767 17 65316 Main Shaft for 27767 30

25029 Nut for 27767 5 65308 Socket Head Cap Screw M6x30 for

27767 18 65317 Decorative Cover for 27767 31

65301 Adjust Seat for 27767 6 65309 Shaft Cover for 27767 19 65318 Hook for 27767 32

25047 Spacer for 27767 7 65310 Main Shaft Half-Axis Belt Wheel for

27767 20 65319 Stainless Steel Hex Bolt M12x50 for

27767 33

25030 Spring Washers for 27767 8 65311 Connecting Set 35x60 for 27767 21 65320 Stainless Steel Flat Pad for 27767 34

65302 Hex Bolt M12x55 for 27767 9 65312 Clamp Plate for 27767 22 65321 Stainless Steel Spring Washer Φ12

for 27767 35

65303 Hex Bolt M12x55 for 27767 10 28665 Bearing 6209-Z for 27767 23 65313 Hex Bolt M12x30 for 27767 36

65304 Clamp Plate Φ12 for 27767 11 65313 Hex Bolt M12x30 for 27767 24 25047 Spacer for 27767 37

65305 Socket Head Cap Screw M8x16 for

27767 12 25047 Spacer for 27767 25 25030 Spring Washers for 27767 38

65306 Half-Axis Belt Wheel for 27767 13 25030 Spring Washers for 27767 26

65307 Belt 13PL1613 for 27767 14 65314 Main Shaft Seat for 27767 27

14

Parts Breakdown

Model MX-CN-0127 27767 Bowl and Motor

Item No. Description Position Item No. Description Position Item No. Description Position

65322 Socket Head Cap Screw M8x20 for

27767 1 28662 Belt SPZ1525 for 27767 21 65345 Clamp Plate 28/10.5 for 27767 40

25068 Nut for 27767 2 65335 Motor Belt Wheel for 27767 22 65346 Shaft Seat Axis for 27767 41

65323 Pin Sets for 27767 3 65336 Shaft Ring 40 for 27767 23 65347 Main Shaft Belt Wheel for 27767 42

65324 Spindle for Motor for 27767 4 28664 Bearing 6208-Z for 27767 24 65348 Nut M20 for 27767 43

65325 Motor Install Seat for 27767 5 65337 Driver Shaft Bearing Seat for 27767 25 65313 Hex Bolt M12x30 for 27767 44

65326 Hex Bolt M10x30 for 27767 6 28664 Bearing 6208-Z for 27767 26 65308 Socket Head Cap Screw M6x30 for

27767 45

65327 Nut M10 for 27767 7 65338 Flat Key A10x50 for 27767 27 65312 Clamp Plate for 27767 46

65328 Clamp Plate 28/10.5 for 27767 8 65339 Driver Shaft for 27767 28 28665 Bearing 6209-Z for 27767 47

65329 Short Stem for 27767 9 65311 Connecting Set 35x60 for 27767 29 65349 Bowl Shaft Seat for 27767 48

65330 Long Stem for 27767 10 65340 Big Belt Wheel of Shaft for 27767 30 65320 Stainless Steel Flat Pad for 27767 49

65331 Stem Support for 27767 11 24883 Nut for 27767 31 65321 Stainless Steel Spring Washer Φ12

for 27767 50

65332 220V/60HZ/3 Motor and Flat Key 6x40

for 27767 12+13 24882 Ring for 27767 32 65350 Stainless Steel Hex Bolt M12x40 for

27767 51

65333 Belt Wheel of Bowl Motor for 27767 14 24939 Spacer for 27767 33 28663 Bearing 33210-Z for 27767 52

65305 Socket Head Cap Screw M8x16 for

27767 15 65309 Shaft Cover for 27767 34 65315 Clamp Plate 60/88x10 for 27767 53

28661 Belt SPZ1462 for 27767 16 25030 Spring Washers for 27767 35 65351 Bowl Shaft Seat for 27767 54

65303 Hex Bolt M12x35 for 27767 17 65342 Hex Bolt M12x40 for 27767 36 65352 Stainless Steel Hex Bolt M12x35 for

27767 55

25030 Spring Washers for 27767 18 65308 Socket Head Cap Screw M6x30 for

27767 37 65321 Stainless Steel Spring Washer Φ12

for 27767 56

25047 Spacer for 27767 19 65343 Clamp Plate for 27767 38 65320 Stainless Steel Flat Pad for 27767 57

65334 Shaft Cover for 27767 20 65344 Hex Bolt M10x20 for 27767 39 65353 Bowl for 27767 58

15

Guard

Item No. Description Position Item No. Description Position Item No. Description Position

65408 Plate for 27767 1 65410 Switch Block Wheel M6x16 for 27767 3 65412 Pin for 27767 5

65409 Switch Block Wheel for 27767 2 65411 Front Protect Guard for 27767 4 65413 Spring Pin 4x30 for 27767 6

Parts Breakdown

Model MX-CN-0127 27767 Body Components

Item No. Description Position Item No. Description Position Item No. Description Position

65354 Chassis Sub-Assembly for 27767 1 65373 Back Protect Guard for 27767 25 65391 Nut M25x1.5 for 27767 49

65355 View Hole Cover for 27767 2 25068 Nut for 27767 26 65392 Fixed Pin Sets for 27767 50

65356 Stainless Steel Hex Bolt M5x20 for 27767 3 65374 Flat Pad Φ8 for 27767 27 65393 Electrical Installation for 27767 51

65357 Stainless Steel Flat Pad Φ5 for 27767 4 25096 Spring Washer Φ8 for 27767 28 65394 Philips Screw M6x20 for 27767 52

65358 Sealing Tape for 27767 5 65375 Pin Sets for 27767 29 65395 Flat Pad Φ6 for 27767 53

65359 Adjust Feet Support Seat for 27767 6 65376 Stainless Steel Socket Head Cap Screw

M8x25 for 27767 30 39316 Locking Washer for Screws for Back

Housing for 27767 54

24898 Circlips for Shaft for 27767 7 65377 Philips Screw M4x10 for 27767 31 65358 Sealing Tape for 27767 55

65360 Stainless Steel Hex Nut M16 for 27767 8 65378 Flat Pad Φ4 for 27767 32 65396 Electronic Control Panel for 27767 56

65361 Planetary Handle M16 for 27767 9 65379 Philips Screw ST4.2x16 for 27767 33 65397 Stainless Steel Hex Bolt M5x50 for

27767 57

65362 Industrial Wheels 100 for 27767 10 65380 Cover Board for 27767 34 65357 Stainless Steel Flat Pad Φ5 for 27767 58

65344 Hex Bolt M10x20 for 27767 11 65381 Fixed Block Shaft for 27767 35 65358 Sealing Tape for 27767 59

24882 Ring for 27767 12 65382 Stainless Steel Hex Bolt M12x30 for

27767 36 65355 View Hole Cover for 27767 60

24939 Spacer for 27767 13 65320 Stainless Steel Flat Pad for 27767 37 65356 Stainless Steel Hex Bolt M5x20 for

27767 61

65363 Block Wheel Shaft for 27767 14 65321 Stainless Steel Spring Washer Φ12 for

27767 38 65357 Stainless Steel Flat Pad Φ5 for 27767 62

65364 Block Wheel Ontology for 27767 15 65383 Button Electronic Control Panel for 27767 39 65398 Belt Tensioner Mark for 27767 63

65365 Stainless Steel Hex Bolt M8x16 for 27767 16 65384 Stainless Steel Philips Screw ST4.2x19

for 27767 40 65399 Blind Rivets Φ3x9 for 27767 64

65366 Stainless Steel Flat Pad Φ8 for 27767 17 65385 Cover for 27767 41 65400 Rotating Tensioner Mark for 27767 65

65367 Block Wheel Seat for 27767 18 65386 Stainless Steel Philips Screw M4x10

for 27767 42 65401 Pin 4x50 for 27767 66

25084 Bearing for 27767 19 65387 Nylon Flat Pad Φ4 for 27767 43 65402 Industrial Wheels 110 for 27767 67

65368 Block Wheel Bolts for 27767 20 65388 Wire Fixed Board for 27767 44 65403 Back Wheel Shaft for 27767 68

65369 Stainless Steel Philips Screw M6x10

for 27767 21 65379 Philips Screw ST4.2x16 for 27767 45 65404 Stainless Steel Wire Mesh for 27767 69

65370 Stainless Steel Flat Pad Φ6 for 27767 22 65389 Cooling Hole Cover for 27767 46 65405 Wire Mesh Layering for 27767 70

65371 Stainless Steel Spring Washer Φ6 for

27767 23 39345 Screw for Back Cover for 27767 47 65406 Wire Mesh Layering for 27767 71

65372 Screw for 27767 24 65390 Brand for 27767 48 65407 Stainless Steel Philips Screw M5x12

for 27767 72

16

Electrical Schematics

Model MX-CN-0127 27767

17

Notes

________________________________________________________________________________________

18

Notes

________________________________________________________________________________________

19

Warranty Registration

Gracias por comprar un producto Omcan usted. Para registrar su garantía para este producto, complete la información a continuación,

cortar la tarjeta en la perforación y luego enviarlo a la dirección indicada a continuación. También puede registrarse en línea en:

Merci d’avoir acheté un produit Omcan. Pour enregistrer votre garantie pour ce produit, complétez les informations ci-dessous, détachez la

carte au niveau de la perforation, puis l’envoyer à l’adresse spécié ci-dessous. Vous pouvez également vous inscrire en ligne en visitant:

Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at

the perforation and then send to the address specied below. You can also register online by visiting:

OMCAN

PRODUCT WARRANTY REGISTRATION

3115 Pepper Mill Court,

Mississauga, Ontario

Canada, L5L 4X5

https://omcan.com/warranty-registration/

or email to: [email protected]

Purchaser’s Information

Name: Company Name:

Address:

Telephone:

City: Province or State: Postal or Zip: Email Address:

Country: Type of Company:

Restaurant Bakery Deli

Dealer from which Purchased: Butcher Supermarket Caterer

Dealer City: Dealer Province or State: Institution (specify):

Invoice: Other (specify):

Model Name: Model Number: Serial Number:

Machine Description:

Date of Purchase (MM/DD/YYYY): Date of Installation (MM/DD/YYYY):

Would you like to extend the warranty? Yes No



Por correo en Canadá

Pour postale au Canada

For mailing in Canada

Por correo en los EE.UU.

Pour diffusion aux États-Unis

For mailing in the US

OMCAN

PRODUCT WARRANTY REGISTRATION

4450 Witmer Industrial Estates, Unit 4,

Niagara Falls, New York

USA, 14305

Thank you for choosing Omcan | Merci d’avoir choisi Omcan | Gracias por elegir Omcan

Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North

American food service industry. Our success over these many years can be attributed to our commitment

to strengthen and develop new and existing relationships with our valued customers and manufacturers.

Today with partners in North America, Europe, Asia and South America, we continually work to improve

and grow the company. We strive to offer customers exceptional value through our qualied local sales

and service representatives who provide convenient access to over 5,000 globally sourced products.

Depuis 1951 Omcan a grandi pour devenir un des “leaders” de la distribution des équipements et

matériel pour l’industrie des services alimentaires en Amérique du Nord. Notre succès au cours de ces

nombreuses années peut être attribué à notre engagement à renforcer et à développer de nouvelles

et existantes relations avec nos clients et les fabricants de valeur. Aujourd’hui avec des partenaires en

Amérique du Nord, Europe, Asie et Amérique du Sud, nous travaillons continuellement à améliorer et

développer l’entreprise. Nous nous efforçons d’offrir à nos clients une valeur exceptionnelle grâce à

nos ventes locales qualiées et des représentants de service qui offrent un accès facile à plus de 5000

produits provenant du monde entier.

Desde 1951 Omcan ha crecido hasta convertirse en un líder en la distribución de equipos y suministros

de alimentos en América del Norte industria de servicios. Nuestro éxito en estos años se puede atribuir

a nuestro compromiso de fortalecer y desarrollar nuevas relaciones existentes con nuestros valiosos

clientes y fabricantes. Hoy con socios de América del Norte, Europa, Asia y América del Sur, que trabajan

continuamente para mejorar y crecer la empresa. Nos esforzamos por ofrecer a nuestros clientes valor

excepcional a través de nuestro local de ventas y representantes de los servicios que proporcionan un

fácil acceso a más de 5,000 productos con origen a nivel mundial.

Omcan MX-CN-0127 Manuel utilisateur

Omcan MX-CN-0127 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents