Denver GSP-130BLACK Manuel utilisateur

ENG-1

Senior Phone

GSP-130

www.facebook.com/denverelectronics

User Guide

English

ENG-2

Insert the SIM card: The SIM card contains your phone number,

PIN code, links to operator services, contacts and SMS

messages. To access the compartment containing the SIM slot,

turn off the phone and lift up the cover starting from the slit on

the bottom right corner. Remove the battery. Insert the SIM card

into the slot with the gold contacts facing down.

Inserting a memory card: in order to use camera and media

player functions, a micro-SD memory card is required (not

ENG-3

included in the package): the card must be placed into the rear

of the phone to the left of the SIM slot. Insert the micro-SD card

as shown, with the gold contacts facing downwards: open the

metal shutter by pushing it towards "open" and lock it again after

inserting the card by pushing it in the opposite direction

("close").

Turn ON, Turn OFF and keypad lock: to turn on and turn off

the phone, press and hold the red end call key. The keypad

locks by closing the flip.

Connecting to a PC: use the USB cable to connect GSP-130 to

a computer. Select USB Storage on your phone. You can save

songs to play with the music player in "My Music" folder, on SD

card.

Inserting the Battery: your device is provided with a lithium-ion

battery and is designed to be used exclusively with original

batteries and chargers. The battery must be inserted into the

rear of the phone. Insert the battery into the battery

compartment with the contacts facing up corresponding to those

of the phone. When done, put the rear cover back into position

as shown in the following illustrations.

ENG-4

Charging the battery: charge the battery before starting to use

the device. Connect the charger to a mains wall socket, and

then plug the jack into the charging base (wait for a moment until

an audio feedback notifies the charging start) or put it directly

into the micro USB port on the right side of the phone. When

charging has been completed/is complete, a second audio

feedback will be heard

Attention: To preserve the functionality of the product and the

integrity of the warranty, we recommend the use of original

chargers. Please charge the battery indoors, in a dry and

favorable environment. It’s normal for the battery to get slightly

ENG-5

warm during the charging process. The battery will reach its full

capacity only after several complete charging cycles.

ENG-6

FM radio: GSP-130 has an internal radio antenna so that no

headset is needed to listen to the radio. To power ON/OFF the

Radio, access FM Radio from the main menu. By selecting

Options you have access to the following functions:

-Automatic Search: to automatically search for radio stations

-Channel list to manually browse saved channels

-Save: to save searched stations

-Manual search: for the manual search of radio channels

-Speaker: reproduces the radio with the speaker instead of the

headphones

-Background: keeps playing in background even after exiting

from the radio app screen

ENG-7

- FM Record: to record the current radio channel

- File list: List of recorded files

Use the UP and DOWN selection keys for volume, M1 and M2

for searching the stations and the OK button to turn ON and

OFF the radio.

Camera: to activate the camera from the main menu press the

OK key. Take a photo by pressing the same key. By using

Options you can access various camera settings and you can

switch to Recorder .

Torch: to turn the torch on and off, use the torch key on the right

side of the phone.

Shortcuts: Menu > Settings > Phone Setting > Shortcut

setting. UP and DOWN selection keys can open some shortcuts;

by default, the UP selection key directly enters the Music Player,

while the DOWN selection key opens the alarm list.

Main menu:To access the Main Menu on your phone, press the

selection key on the top left

ENG-8

- Messaging: to write and read SMS text messages

- Contacts: to manage and save contacts

- Calls Log: Missed Calls, dialled calls...

- Multimedia: camera, radio, gallery…

- FM Radio: to turn on and off the radio

- Settings: to customize your phone

-Tools: with Calendar, Bluetooth, Calculator, Alarms...

- SOS: to enable and customize the SOS function

Answer an incoming call: respond to an incoming call simply

by opening the flip. To set up the answer mode select Settings >

Call settings > Answer mode

Making a call: to make a call from the Home screen, select the

desired number by using the

keypad and then press the green call button. To end the call,

press the red end call key.

Call a number from the contacts: from the main screen, press

the upper right selection key; this will automatically open the

Contacts. Scroll through contacts with the UP/DOWN keys and

press the green call button to call the desired contact.

Call anumber from the call log: from the main screen, press

the green call key, the missed, received, and outgoing calls

will be automatically displayed.

Scroll with UP/Down keys and press the green call button when

you find the number you want to call.

ENG-9

Add contacts to the Contacts: Select Menu > Contacts >

Options > New, and choose to save the number on the SIM or

the Phone. Enter the name and the new number, then press

Save.

Speed dial: in Menu > Contacts > Options >More > Speed

Dial > Options > Edit, you can assign to keys 2-9 certain

numbers that will be called automatically if you press and hold

the related button. The device has two other additional quick dial

keys M1 and M2, to which you can associate as many numbers

in the same menu. These keys, placed to the left and to the right

of OK button, are activated/activate activated with a simple

press.

Memory status: this feature within the contacts settings allows

you to see how much free storage there is on the phone and

SIM card.

Speech Dial: GSP-130 Start speaks out loud each number you

press. To activate this function, select Menu > Settings >

Profiles > General > Options > More tones > Dialpad >

Speech Dial

Send and read SMS

Send SMS: from the main screen, choose Menu >Messaging >

Write message and write your message. Press Options >

Send to > Number and enter the number using the numeric

ENG-10

keypad or Add from contacts to select from the Contacts the

contact you want to text.

Read SMS: when you receive a new text message, the phone

displays an envelope icon on the top bar(until the message is

read/for as long as the message is unread) and a notification

pop up appears on the main screen. Press the upper left

selection key to enter the Inbox or access it fromthe main

screen by selecting Menu > Messages >Inbox.

Notification Led: The flash below the Camera can notify

incoming or missed calls and messages,when flip is closed. You

can enable or disable thisfunction whenever you want for each

event to notify in Settings > Notification LED

Bluetooth: In Settings > Connectivity > Bluetooth >Power

on you can turn on Bluetooth and search forother devices

(headsets, phones…). Select the device you would like to

associate with and confirm it on both devices.

S.O.S. Function: GSP-130 is equipped with a dedicated button

for fast forwarding emergency calls (*). This feature can be

turned on and off by selecting Menu> SOS > Status. SOS

button is placed on the rear of the phone In case of emergency,

use this function to ask for help from up to five phone numbers,

previously set in Menu> SOS > SOS numbers; press and hold

the SOS button for 2-3 seconds. As soon as the SOS function is

activated, the phone will send out a high volume alarm (that can

be turned on and off in SOS > SOS alarm On/Off). Then,

ENG-11

it will send a customizable SOS message to the chosen SOS

numbers. Afterwards, the phone will call the 5 SOS numbers, for

about 25 seconds each. If there is no answer, there will be a

second cycle of calls. This procedure will be repeated for 5 times.

If one of the called numbers answers, the cycle will be

interrupted and the call will automatically switch to speaker

phone (handsfree).

Attention: The S.O.S. calls cycle will be interrupted if the

answering machine or voicemail of one of the called SOS

numbers takes the call.

Set Ringtones: select Menu > Settings > Profiles > General >

Options > Ringtone. Select Call Ringtone and set the desired

tone from those available.

Quickly turn on/off vibration mode To quickly turn off incoming

calls ringtone and messages tone, and activate vibration, press

and hold #. By pressing # again, the phone will enter in General

mode.

Phone Settings: from Menu > Settings > Phone , you

have/will have access to various settings such as Date and Time,

Language, and Display. Select Restore to reset the factory

settings of GSP-130: enter the phone password 1234 to

confirm the restoring.

Radio frequency (RF) exposure and SAR THIS DEVICE

ENG-12

MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO

RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is

designed and manufactured not to exceed the limits for

exposure to radio frequency (RF) recommended by international

guidelines (ICNIRP). These limits are part of comprehensive

guidelines and establish permitted levels of RF energy for the

general population. The guidelines were developed by

independent scientific organizations through periodic and

thorough evaluation of scientific studies. The guidelines include

a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of

measurement known as the Specific Absorption Rate, or SAR.

The SAR limit stated in the international guidelines is 2.0

watts/kilogram (W/kg)*. Tests for SAR are conducted using

standard operating positions with the device transmitting at

its highest certified well below the maximum value. This is

because the device is designed to operate at

multiple power levels so as to use only the power required to

reach the network. In general, the closer you are to a base

station, the lower the power output of the device. power level in

all tested frequency bands.

Although the SAR is determined at the highest certified power

ENG-13

level, the actual SAR of the device while operating can be well

below the maximum value. This is because the device is

designed to operate at multiple power levels so as to use only

the power required to reach the network. In general, the closer

you are to a base station, the lower the power output of the

device.

SAR values may vary depending on national reporting and

testing requirements and the network band. Use of device

accessories and enhancements may result in

different SAR values.

The SAR limit for mobile devices used by the public is 2.0 W/kg

averaged over 10 grams of body tissue. The guidelines

incorporate a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. SAR values may vary depending on

national reporting requirements and the network band.

The highest SAR value for this model phone tested for use is

0.743 mW/g

ENG-14

Warning

• Lithium battery inside!

• Do not try to open the product!

• Do not expose to heat, water, moisture, direct sunlight!

CAUTION!

www.denver-electronics.com

ENG-15

Electric and electronic equipment and included batteries

contains materials, components and substances that can be

hazardous to your health and the environment, if the waste

material (discarded electric and electronic equipment and

batteries) is not handled correctly.

Electric and electronic equipment and batteries is marked with

the crossed out trash can symbol, seen below. This symbol

signifies that electric and electronic equipment and batteries

should not be disposed of with other household waste, but

should be disposed of separately.

As the end user it is important that you submit your used

batteries to the approriate and designated facility. In this manner

you make sure that the batteries are recycled in accordance with

legislature and will not harm the environment.

All cities have established collection points, where electric and

electronic equipment and batteries can either be submitted free

of charge at recycling stations and other collection sites, or be

collected from the households. Additional information is

ENG-16

available at the technical department of your city.

Hereby, Inter Sales A/S, declares that this senior mobile phone

DENVER GSP-130 is in compliance with the essential

requirements and other relevant provisions of Directive

1999/5/EC. A copy of the Declaration of Conformity may be

obtained at Inter Sales A/S, Stavneagervej 22, DK-8250 Egaa,

Danmark

Code for factory default:1234

Code for security password:1234

Importer:

DENVER ELECTRONICS A/S

Stavneagervej 22

DK-8250 EGAA

DENMARK

www.facebook.com/denverelectronics

GER-1

Senior Telefon

GSP-130

www.facebook.com/denverelectronics

Bedienungsanleitung

German

GER-2

SIM-Karte einlegen: Auf der SIM-Karte befinden sich Ihre

Telefonnummer, der PIN-Code und Links zu Betreiberdiensten,

Kontakten und SMS-Nachrichten. Um das Fach mit dem

SIM-Kartenschlitz zu öffnen, schalten Sie das Telefon aus und

heben Sie die Abdeckung beginnend am Schlitz in der unteren

rechten Ecke an. Entnehmen Sie die Batterie. Installieren Sie

die SIM-Karte mit den goldenen Kontakten nach unten gerichtet

im Kartenschlitz.

GER-3

Speicherkarte installieren: Für die Nutzung der Kamera und

der Funktionen des Media Players ist eine SD-Speicherkarte

erforderlich (nicht enthalten): Installieren Sie die Kare an der

Rückseite des Telefons links neben dem SIM-Kartenschlitz.

Installieren Sie die MicroSD-Karte wie dargestellt mit den

goldenen Kontakten nach unten gerichtet: Öffnen Sie den

Metallverschluss, indem Sie ihn nach „oben“ drücken. Verriegeln

Sie den Verschluss nach der Installation der Speicherkarte,

indem Sie ihn in die entgegengesetzte Richtung („schließen“)

schieben.

EINSCHALTEN, AUSSCHALTEN und Tastensperre: Halten

Sie die rote Taste zum Beenden von Anrufen gedrückt, um das

Telefon ein- und auszuschalten. Die Tastatur wird durch

Zuklappen des Telefons gesperrt.

Verbindung mit einem PC: Verwenden Sie ein USB-Kabel, um

das GSP-130 mit einem Computer zu verbinden. Wählen Sie an

Ihrem Telefon USB-Gerät . Speichern Sie Titel, die Sie mit dem

Musik Player wiedergeben möchten, im Ordner „Meine

Musik“ auf der SD-Karte.

Batterien Einsetzen: Ihr Gerät verfügt über eine

Lithium-Ion-Batterie und ist ausschließlich für den Gebrauch mit

GER-4

Originalbatterien und Originalladegeräten bestimmt. Die Batterie

ist an der Rückseite des Telefons zu installieren. Installieren Sie

die Batterie so im Batteriefach, dass die Kontakte mit denen des

Telefons entsprechend ausgerichtet sind. Installieren Sie

danach wieder die rückseitige Abdeckung gemäß den

nachfolgenden Abbildungen.

Batterie aufladen: Laden Sie die Batterie vor dem Gebrauch

des Geräts auf. Schließen Sie das Ladegerät an eine Steckdose

und anschließend den Stecker an die Ladestation (warten Sie

einen Moment, bis ein Signalton auf den Start des

Ladevorgangs hinweist) oder direkt an den Mikro-USB-Port

rechts am Telefon an. Nach Abschluss des Ladevorgangs ertönt

ein zweiter Signalton.

La page charge ...

Denver GSP-130BLACK Manuel utilisateur

Ce manuel convient également à

Denver GSP-130BLACK Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents