Motorola TLKR T7 Le manuel du propriétaire

Manuel de l’utilisateur TLKR T7

TLKR T7 Benutzerhandbuch

Manual del usuario de TLKR T7

TLKR T7 – Manuale per l’utente

Manual do Propriátrio TLKR T7

TLKR T7 Gebruikershandleiding

TLKR T7 Owner’s Manual

Instrukcja obsugi radiotelefonu TLKR T7

TLKR T7 Kullanc Klavuzu

TLKR T7  

1

English

CONTENTS

Product Safety and RF Exposure

for Portable Two-Way Radios . . . . . . . . . . . . . . . . . . . . . . . . 2

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Control and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Install the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Battery Level and Low Battery Alert. . . . . . . . . . . . . . . . . . . . 5

Charging the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Direct Charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the Charging Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Charging the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning the Radio On and Adjusting the Volume . . . . . . . . . 6

Adjusting the Sound (Key Beeps) . . . . . . . . . . . . . . . . . . . . . 6

Roger Beep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Talking on Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Navigating through the Menu . . . . . . . . . . . . . . . . . . . . . . . . 7

Select Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Choosing a Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Choosing a Sub-code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Common Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Channel Scan Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Dual Watch Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Voice Operated Transmission . . . . . . . . . . . . . . . . . . . . . . . . 9

Room Monitor Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Transmitting a Call Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Up timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Group Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Channel Setting in Group Mode . . . . . . . . . . . . . . . . . . . . . 11

Set Auto Channel Change . . . . . . . . . . . . . . . . . . . . . . . . . 11

Set Manual Channel in Group Mode . . . . . . . . . . . . . . . . . . 11

Set All/Direct Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Set All Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Set Direct Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Group Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Set Group Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Group Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set Ring Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Set ID Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Automatic Power Save Feature . . . . . . . . . . . . . . . . . . . . . .15

Battery Low Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

LCD Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Monitor Mode Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Specificatons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Frequency Chart (MHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Approved Accessories List . . . . . . . . . . . . . . . . . . . . . . . . . .16

CTCSS Chart (Hz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

DCS Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

What Is Not Covered By The Warranty . . . . . . . . . . . . . . . .18

Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

2

English

Product Safety and RF Exposure

for Portable Two-Way Radios

Features

• 8 PMR Channels

• 121 Sub-Codes (38 CTCSS Codes & 83 DCS codes)

• Up to 10 km Range*

• Internal VOX Circuitry

• 10 Selectable Call Tone Alerts

• Backlit LCD Display

• Headset Jack for Optional Headset

• Roger Beep

•Up timer

• Room Monitor

• Battery Charger

• Battery level Meter

• Channel Monitor

• Channel Scan

•Dual Watch

• Keypad Lock

• Auto Squelch Control

• Auto Repeat (Scrolling)

• Battery Save

• Battery Low Alert

• Battery Low Sleep

• Tone (On/Off)

• Direct Call (Caller ID Call)

• Group Call

• Silent Mode

•All Call

• Auto Channel Change

* Range may vary depending on environmental and/or topographical

conditions.

Before using this product, read the

operating instructions for safe usage

contained in the Product Safety and RF

Exposure booklet enclosed with your

radio.

ATTENTION!

3

English

Control and Functions

Headset Jack

(Headset is not

included)

Antenna

Volume Knob with

Power SW

PTT (Push-To-Talk) Key

(Call) Key

MON (Monitor) Key

Key

Select Item

and numbers

for Menu

MENU/GRP key

(Menu and

Group Menu)

SEL/ key

(Select and Lock)

Speaker

Microphone

DC IN 9V Jack

4

English

Display

1. Dual Watch Indicator

2. Silent Indicator

3. Transmit Indicator

4. Receive Indicator

5. Group Indicator

6. Scan Indicator

7. Battery Level Meter

8. Channel Indicator

9. Call Indicator

10. VOX/Room Monitor Indicator

11. Sub-code (Group ID/Code) Indicator

12. Colon (for Up timer)

1

2

3

4

5

12

11

10

6

9

7

8

5

English

Congratulations on your purchase of the TLKR T7 radio.

This product is a lightweight, palm-sized radio. Use it at

sporting events to stay in contact with family and friends,

hiking, skiing, outdoors, or in a neighborhood watch for vital

communication. This compact, state-of-the-art device is

equipped with many features.

Package Contents

Your package contains two TLKR T7 radios, two belt clips,

one charging cradle, AC adapter, two battery support

brackets, two rechargeable NiMH battery packs, and this

reference guide. You may operate the unit 4 AAA alkaline

batteries (not included).

Install the Battery

Your TLKR T7 radio uses the NiMH battery pack or 4 AAA

alkaline batteries (not included). If alkaline batteries are

used, we recommend using high quality alkaline batteries.

To install the NiMH battery pack:

1) Make sure your radio is OFF.

2) Remove the battery compartment door by pressing the

tab at the bottom of the compartment door, allowing the

door to be removed.

3) Install the NiMH batteries into the battery compartment.

Be certain to follow the + and – symbols in the

compartment. Installing the batteries incorrectly will prevent

the unit from operating.

4) Replace the battery compartment door.

Battery Level and Low Battery Alert

This unit has a battery level meter on the display to indicate

the status of the batteries. When the battery in the unit is

low, the battery level meter icon will flash. Replace the

alkaline batteries immediately.

Charging the Radio

If you use the rechargeable NiMH battery pack, two TLKR

T7 radios can be charged directly or by using the supplied

charging cradle.

Make sure the radio is turned OFF before placing the

radio in the charging cradle. Otherwise the battery level

meter icon will not indicate properly.

Direct Charge

1. Connect the DC adapter’s plug to the radio’s DC IN 9V

jack and plug the other end to a vehicle's accessory

power outlet.

2. Charge the battery pack for 16 hours.

Using the Charging Cradle

1. Connect the AC adapter to DC IN 9V and to a standard

electrical outlet.

2. Set the charging cradle on the desk or tabletop, and

place the radio in the charging cradle with the keypad

facing forward.

3. Make sure that the LED illuminates. Charge the battery

pack for 16 hours and remove the radio from the charg-

ing cradle after charge.

Note: The charge indicator LEDs will remain on as long

as the radios are left in the charger.

6

English

Charging the battery

You can charge the NiMH battery pack itself using the

included battery support bracket.

1. Place the battery support bracket into the charging cra-

dle.

2. Install the NiMH battery pack applying its charging

contacts to those of charging cradle. Installing the battery

pack incorrectly will prevent the battery pack from

charging.

3. Make sure that the LED illuminates. Charge the battery

pack for 16 hours.

Note: The charge indicator LEDs will remain on as long

as the battery is left in the charger.

Using the Radio

In order to get the most out of your new radio, read this ref-

erence guide completely before attempting to operate the

unit.

Turning the Radio On and Adjusting the Volume

1. Turn the rotary knob to clockwise to turn the radio ON,

and increase the volume by turning the rotary knob.

To decrease the volume, turn the rotary knob to counter

clockwise.

2. Turn the rotary knob to the end of counterclockwise to

turn the radio OFF.

Adjusting the Sound (Key Beeps)

Your radio emits a beep each time one of the keys (except

for the PTT and key) is pressed.

To switch this sound OFF or ON, press and hold the key

while turning the radio ON.

Roger Beep

Roger Beep is a BEEP that is sent to notify the end of

transmission (PTT and VOX transmission). Roger Beep

can be heard through the speaker when Key Beep is on. It

is transmitted even if Key Beep is turned off. However,

Roger Beep will not be heard from the speaker.

To turn Roger Beep OFF or ON:

Press and hold the key while turning the radio ON.

Talking on Your Radio

To talk to others using the radio:

1. Press and hold the PTT key and speak in a clear, normal

voice about 5-8 cms away from the microphone. While

you are transmitting, the icon will appear on the

display. To avoid cutting off the first part of your

transmission, pause slightly after pressing the PTT

button before you start talking.

2. When you have finished speaking, release the PTT key.

You can now receive incoming calls. While receiving, the

icon will appear on the display.

Note: When you continue to transmit for 60 seconds, the

radio emits TX Time Out tone and the icon flashes.

The radio will stop transmitting.

7

English

Navigating through the Menu

To access the advanced features of the TLKR T7, your

radio has two kinds of Menu functions: Select Menu and

Common Menu.

1. When the SEL/ key is pressed, the radio enters the

Channel select Menu. When the MENU/GRP key is

pressed, the radio enters the Common Menu.

2. Methods of exiting the Menu function are:

a. Press PTT.

b. Wait 10 seconds until the unit automatically returns to

"Normal" mode.

Select Menu

By pressing the SEL/ key, your radio navigates through

Select Menu as follows:

Press SEL/ key to proceed to the next step of Menu

mode.

Press the MENU/GRP key (in both settings), SEL/ key (in

Sub-code setting) to exit the Menu.

Choosing a Channel

Your radio has 8 channels and 121 Sub-codes you can use

to talk to others. In order to speak to someone, each of you

must set to the same channel and Sub-code.

To choose a channel:

1. Enter the Select Menu. Channel Indicator will blink.

2. Press the or key to increase or decrease the channel

number displayed. If you press and hold the or key,

the channel number increase or decrease continuously.

3. Go to Sub-code setting to choose a Sub-code.

Choosing a Sub-code

Allocating a Sub-code to your radio will help to reduce inter-

ference but remember that the radios that have different

Sub-codes set will not be able to communicate with each

other. Each of the channels 1-8 may have any one of the

codes from 0 to 121.

1. Enter the Select Menu. Advance through the Select Menu

until the Sub-code indicator blinks.

2. Press the or key to increase or decrease the Sub-

code number displayed. If you press and hold the or

key, the Sub-code number increase or decrease

continuously.

3. Exit the Select Menu by pressing the

SEL/ key.

Normal

Channel

Sub-

Code

0-121

1-8

8

English

Common Menu

By pressing MENU/GRP key, your radio navigates as

follows:

Press the key to proceed (or go back a step by pressing

the key) to select the setting item of Menu mode.

By pressing the SEL/ key, the radio enters the Common

Menu to control each feature.

By pressing MENU/GRP key, your radio can return to each

original MENU mode. To operate the [Dual Watch] and

[Room Monitor] functions, press the SEL/ key.

For other Menu options, press the SEL/ key to exit the

current Menu.

Normal

SCAN

2 CH

(Dual

Watch)

VOX

ROOM

(Room

Monitor)

TONE

(Call Tone)

SLNT

(Silent)

TIME

(Up Timer)

Select the

channel (1-8) and

sub-code (0-121)

Up Timer

Mode

Select the

sensitivity (1-5)

Off

1-5

1-10

“N” or “Y”

Scan Mode

Dual Watch Mode

Room Monitor Mode

MENU/GRP key

Press SEL/

key to set up

Press

MENU/GRP key

to return

Channel Scan Feature

Your TLKR T7 radio has a channel scan feature that allows

you to easily scan all 8 channels. When an active channel

is detected, the radio will pause on that channel until the

channel is clear. Then after 2 second (5 seconds for VOX

On without Headset) pause, the radio will continue

scanning. Pressing the PTT key while the scan is paused

on a channel will allow you to transmit on that channel and

exit scan mode.

To turn the channel scan ON:

1. Enter the Common Menu and select “SCAN”.

2. Press SEL/ . The channel number on the display

changes rapidly as the radio cycles through the chan-

nels.

To turn the channel scan OFF:

Press the MENU/GRP or PTT key.

9

English

Dual Watch Mode

Your radio can scan the current channel and another chan-

nel alternately. You need to set a channel number and its

Sub-code for another channel.

To set the another channel and start Dual Watch:

1. Enter the Common Menu and select “2CH”, then press

SEL/ key to proceed to Dual Watch Mode setting.

The Dual Watch icon appears.

2. Press the or to select the channel number, then

press the SEL/ key.

3. Press the or to select the Sub-code number, then

press the SEL/ key.

4. The radio starts Dual Watch.

Note: If you set the same channel number and Sub-code as

the current channel, Dual Watch does not work.

To turn the Dual Watch mode OFF:

Press the MENU/GRP key.

Voice Operated Transmission

Your TLKR T7 radio is equipped with a user selectable

Voice Operated Transmitter (VOX) that can be used for

automatic voice transmissions. The VOX feature is

designed for hands-free purpose. Transmission is initiated

by speaking into the microphone of radio or headset

(headset is not included) instead of pushing the PTT key.

To select the VOX level:

1. Enter the Common Menu and select “VOX”. Then press

SEL/ key. The current level (OFF. 1-5) blinks. Level “N”

(OFF) disables VOX, while levels 1-5 set the sensitivity of

the VOX circuit.

2. Press the or key to select the desired VOX

sensitivity level. Use Level 1 in quiet environments, and

use level 5 in very noisy environments. You can find the

appropriate sensitivity level by speaking into the

microphone. If the VOX icon flashes, your voice is

accepted.

3. Exit the Common Menu.

Note: When you continue to transmit using VOX function for

60 seconds, the radio emits TX Time Out tone and the

icon flashes for 5 seconds.

Room Monitor Feature

You can use one of your TLKR T7 radios as a room monitor

and use the other radio to listen to and keep a check on the

voice in another room. When you set the room monitor fea-

ture, the monitoring radio will detect voice/noises (accord-

ing to the sensitivity level you set) and transmit back to the

listening radio without pushing the PTT key. The monitoring

radio is not able to receive any transmissions in this mode.

To turn the Room Monitor ON:

1. Enter the Common Menu and select “ROOM”. Then

press SEL/ key.

2. Press the or key to select the desired room moni-

tor sensitivity level. Use level 1 in quiet environments,

and use level 5 in very noisy environments.

3. Press the SEL/ key to operate the Room Monitor.

To turn the Room Monitor OFF:

Press the MENU/GRP key.

10

English

Note:

- Pressing the PTT key in Room Monitor mode is invalid and

the radio emits PTT Error Tone.

- When the voice/noise in another room continues more than

60 seconds, the monitoring radio stops monitoring for 5

second, and resumes.

Transmitting a Call Tone

Your TLKR T7 radio is equipped with 10 selectable call

tones that will be transmitted when the key is pressed in

Normal Mode.

To select a call tone:

1. Enter Common Menu and select “TONE”. Then press

SEL/ key.

The current call tone number (1-10) blinks.

2. Press the or key to choose the number of the

desired call tone. Each tone will be heard through the

speaker.

3. Exit the Common Menu.

To transmit the selected call tone, press the key in Nor-

mal Mode. The selected tone will automatically be transmit-

ted for a fixed length of time. Call tone will be cancelled

when the PTT key is pressed.

Silent Mode

When you turn on the silent mode, all incoming calls are

muted: the radio blinks the backlight to alert you to an

incoming call.

If you do not respond to the call, the backlight turns off, and

the CALL icon will blink until there is no signal.

The TLKR T7 will also vibrate to remind you that you

missed a call.

Silent mode is disabled for 15 seconds when you transmit,

receive, or press any other button.

To set the silent mode:

1. Enter the Common Menu and select “SLNT”. Then press

SEL/ key.

2. Press the to set Silent Mode to On. The Channel

Indicator shows “Y” and SILENT icon appears.

3. Press the to set Silent Mode to Off. The Channel

Indicator shows “N” and SILENT icon disappears.

11

English

Up timer

You can use this radio as a up timer. It can time up to 59

minutes 59 seconds.

After this period of time, it will continue starting with “00:00”.

To use up timer:

1. Enter the Common Menu and select “TIME”.

2. Press the SEL/ key to choose this menu.

3. Press the SEL/ key. Up timer starts.

4. Press the SEL/ key, it goes to pause status.

Pressing the SEL/ key controls the On/Off for timer

start.

5. Pressing the MENU/GRP key while counting or pausing,

reverts the radio to idle time (time reset 00:00) mode.

6. Press the PTT key or press MENU/GRP key at idle sta-

tus to stop up timer.

Note: You can receive incoming signals during this mode.

If an All Call is received, the ID Name will be indicated for

10 seconds. If a Direct Call is recieved, the ID Name will be

indicated for the status. Then the radio will return to the

timer mode and the Call Icon will blink.

Group Mode

Press and hold the the

MENU/GRP

key to go to Group Menu.

Channel Setting in Group Mode

Press the SEL/ key in Group Mode to enter to Channel

Setting.

Press the or key to select “Auto Channel Change

Setting” or “Manual Channel Setting”.

The display shows the following:

Press the SEL/ key to enter to each setting.

Note: Press the MENU/GRP key to go back to Idle status

Set Auto Channel Change

A channel number blinks and the Sub Code segments

show “ALL”.

Press the or key to select the channel.

Press key or SEL/ key to transmit Auto Channel

Change command.

Note: Press the MENU/GRP key to go back to Channel

Setting in Group mode.

Set Manual Channel in Group Mode

A channel number blinks and the Sub Code segments

show “MY”.

Press the or key to select the channel.

Now, Manual Channel is available.

Press the SEL/ key to exit from Manual Channel setting.

Note: Press the MENU/GRP key to go back to Channel

Setting in Group mode.

Auto Channel Change

Manual Channel

Setting

12

English

Set All/Direct Call

Press key in Group Mode to enter All/Direct Call Setting.

At first the user selects a type of Call from All Call

transmission or Direct Call Setting.

To select this setting, press the or key to select a

type of Call.

Set All Call

When ”All Call Transmission” is selected, press key or

SEL/ key to exit from this setting, and transmit All Call

immediatley.

Then it sounds All Call Tone.

The display shows TX icon and Call icon blinks while

transmitting.

Note: Press the MENU/GRP key to go back to Idle status.

Set Direct Call

The display shows ID Number on Channel segments and

ID Name blinks on Sub Code segments.

Press the key or key to select an ID Number.

Press key or SEL/ key to transmit Direct Call

command.

Then the user transmits Direct Call command to only the

selected ID.

The display shows TX icon and Call icon while transmitting.

The unit sounds the selected Call Tone while transmitting

Direct Call command.

Note: Press the MENU/GRP key to go back to All/Direct

Call setting.

All Call Transmission

Direct Call Setting

The ID Number for

Direct Call

The ID Name

13

English

Group Menu

Press and hold the MENU/GRP key to get into GROUP MENU.

Press the (or ) key to proceed to each menu (GRP/CODE/RING/ID).

Press the SEL/ key to choose each group menu.

See LCD:

Press the (or ) key to change each desired condition or number.

Press the SEL/ key to select it.

Press MENU/GRP key to exit to Menu idle mode.

Note: In group mode, you cannot receive transmissions from other radios unless they are also set to the same channel and

same group code.

Normal

“GRP”

(Group Mode)

“CODE”

(Group Code)

“ID”

(ID Setting)

ID Number 1 - 16

0 - 121

1 - 10

EXIT

ID Name

up to 4 characters

“N” or “Y”

“N”

“Y”

EXIT from Menu

“RING”

(Ring Tone)

14

English

Set Group Mode

Press the SEL/ key to control Group Mode. Choose “Y”

or “N” by pressing the or key.

See LCD:

Choose "N" and press the SEL/ key to exit from Group

Menu.

Choose "Y" and press the SEL/ key to go to Group Menu

and Group Code setting.

Set Group Code

Group code is selectable from 0 - 121.

Sub-code segments indicate Group code.

To select a group code, press the key or key to

choose the Group code.

Press the SEL/ key to complete the Group Code setting.

The radio enters “Ring Tone Setting Menu”.

Press MENU/GRP key to go back to Group Menu.

Set Ring Tone

The user can select Ring Tone for a Direct Call.

There are 10 Ring Tones, these Ring Tones are the same

as Call Tones.

To select a Ring Tone, press the key or key.

The selected Ring Tone sounds from speaker.

Set ID

Each radio in your group needs to be set to an ID number

from 1 to 16.

The ID number requires to distinguish a unit of the same

Group.

The user can set an ID name of up to 4 characters.

The user selects ID number that is displayed on Channel

segments by pressing the key or key.

When the registered ID of All Call is selected by or

key, the LCD indicates “USED” at Sub-code segments, and

if non registered ID is selected, it indicates nothing at Sub-

code segments.

See LCD:

Press the SEL/ key to advance to the setting ID Name.

Set ID Name

ID name appears on other units’ displays when you make

an All Call or Direct Call. This is also the name that appears

on other radio displays when someone wants to make a

Direct Call to you. When no ID Name is set, the unit number

appears.

Press the key or key to select a character on the

blinking sub code segments.

15

English

Then, press the SEL/ key to move to the next character.

The ID Name characters can be selected up to 4

characters.

Finally, press the SEL/ key to register the ID number and

ID Name.

The radio exits from ID setting.

Note: Whenever the user presses MENU/GRP key, the unit

cancels selected ID Number and entered ID Name,

then it exits from Group Menu.

Key Lock

To lock the keypad:

Press and hold the SEL/ key for 2 seconds. Sub Code

segments shows “LOCK” for 2 seconds, then it returns to

previous screen.

To unlock the keypad:

Press and hold the SEL/ key for 2 seconds. Sub Code

segments shows “UNLK” for 2 seconds, then it returns to

previous screen.

Note: If any key (except PTT) is pressed while “Key Lock”

is ON, “LOCK” appears for 2 seconds with error tone.

Automatic Power Save Feature

Your radio has a unique circuit designed to dramatically

extend the life of the batteries. If there is no transmission

nor an incoming call within 3 seconds, your radio switches

to the Power Save mode. The radio is still able to receive

transmissions in this mode.

Battery Low Alert

Battery Low alerts when the battery level becomes empty.

The alert starts 30 seconds after the Battery Low icon starts

blinking.

The Sub Code indicates “BATT” and the Battery Low icon

blinks.

The Alert Tone sounds every 5 seconds for 30 seconds

when the Battery is Low.

The Sub Code

LCD Backlight

The LCD backlight will automatically turn ON when any key

(except for PTT) is pressed. The LCD display will illuminate

for 10 seconds after the last key press.

Monitor Mode Feature

Your TLKR T7 allows you to listen for weak signals on the

current channel at the press of MON key.

To turn the Monitor Mode ON:

- Press the MON key for brief listening. The RX icon blinks.

- Press and hold the MON key for 1.5 seconds for

continuous listening. The RX icon continues to blink.

To turn the Monitor Mode OFF:

- Press the MON, MENU/GRP, or SEL/ key to return the

“Normal” mode. The RX icon stops blinking.

16

English

Specificatons Frequency Chart (MHz)

Approved Accessories List

Please contact your dealer or retailer to purchase these

accessories.

Channels 8 PMR

Sub-Codes 121 (38 CTCSS and

83 DCS Codes)

Operating

Frequency

446.00625 - 446.09375 MHz

Power Source AAA Ni-MH battery Pack

4 AAA Alkaline Batteries

(not included)

Range Up to 10 km

Battery Life 20 Hours typ. -

Alkaline Bateries

(5/5/90 duty cycle)

18 Hours typ. -

NiMH Battery pack

(5/5/90 duty cycle)

Ch. Freq.

1 446.00625

2 446.01875

3 446.03125

4 446.04375

5 446.05625

6 446.06875

7 446.08125

8 446.09375

Motorola Part No. Description

00275 TLKR-T5/T7 Car Charger Cable

00276 TLKR-T5/T7 Unit Charger (EU)

00277 TLKR-T5/T7 Unit Charger (UK)

00278 TLKR-T5/T7 Battery

00279 TLKR-T5/T7 Belt Clip

00174 Consumer Earbud

00179 Consumer Headset

17

English

CTCSS Chart (Hz)

DCS Code

Code No. Tone Frequency (HZ) Code No. Tone Frequency (HZ) Code No. Tone Frequency (HZ)

0 Off 13 103.5 26 162.2

1 67.0 14 107.2 27 167.9

2 71.9 15 110.9 28 173.8

3 74.4 16 114.8 29 179.9

4 77.0 17 118.8 30 186.2

5 79.7 18 123.0 31 192.8

6 82.5 19 127.3 32 203.5

7 85.4 20 131.8 33 210.7

8 88.5 21 136.5 34 218.1

9 91.5 22 141.3 35 225.7

10 94.8 23 146.2 36 233.6

11 97.4 24 151.4 37 241.8

12 100.0 25 156.7 38 250.3

Code

No.

Code Code

No.

Code Code

No.

Code Code

No.

Code Code

No.

Code Code

No.

Code

39 023 53 114 67 174 81 315 95 445 109 631

40 025 54 115 68 205 82 331 96 464 110 632

41 026 55 116 69 223 83 343 97 465 111 654

42 031 56 125 70 226 84 346 98 466 112 662

43 032 57 131 71 243 85 351 99 503 113 664

44 043 58 132 72 244 86 364 100 506 114 703

45 047 59 134 73 245 87 365 101 516 115 712

46 051 60 143 74 251 88 371 102 532 116 723

47 054 61 152 75 261 89 411 103 546 117 731

48 065 62 155 76 263 90 412 104 565 118 732

49 071 63 156 77 265 91 413 105 606 119 734

50 072 64 162 78 271 92 423 106 612 120 743

51 073 65 165 79 306 93 431 107 624 121 754

52 074 66 172 80 311 94 432 108 627

18

English

Warranty Information

The authorized Motorola dealer or retailer where you

purchased your Motorola two-way radio and/or original

accessories will honour a warranty claim and/or provide

warranty service. Please return your radio to your dealer or

retailer to claim your warranty service. Do not return your

radio to Motorola.

In order to be eligible to receive warranty service, you must

present your receipt of purchase or a comparable substitute

proof of purchase bearing the date of purchase. The two-

way radio should also clearly display the serial number. The

warranty will not apply if the type or serial numbers on the

product have been altered, deleted, removed, or made

illegible.

What Is Not Covered By The Warranty

Defects or damage resulting from use of the Product in

other than its normal and customary manner or by not

following the instructions in this user manual.

Defects or damage from misuse, accident or neglect.

Defects of damage from improper testing, operation,

maintenance, adjustment, or any alteration or modification

of any kind.

Breakage or damage to aerials unless caused directly by

defects in material or workmanship. Products disassembled

or repaired in such a manner as to adversely affect

performance or prevent adequate inspection and testing to

verify any warranty claim.

Defects or damage due to range.

Defects or damage due to moisture, liquid or spills.

All plastic surfaces and all other externally exposed parts

that are scratched or damaged due to normal use.

Products rented on a temporary basis. Periodic

maintenance and repair or replacement of parts due to

normal usage, wear and tear.

Copyright Information

The Motorola products described in this manual may

include copyrighted Motorola programs, stored

semiconductor memories or other media. Laws in the

United States and other countries preserve for Motorola,

certain exclusive rights for copyrighted computer programs,

including the exclusive right to copy or reproduce in any

form, the copyrighted Motorola programs.

Accordingly, any copyrighted Motorola computer programs

contained in the Motorola products described in this manual

may not be copied or reproduced in any manner without

express written permission of Motorola. Furthermore, the

purchase of Motorola products shall not be deemed to grant

either directly or by implication, estoppel, or otherwise, any

license under the copyrights, patents or patent applications

of Motorola, except for the normal non-exclusive royalty

free license to use that arises by operation of law in the sale

of a product.

MOTOROLA, the Stylized M Logo and all other trademarks

indicated as such herein are trademarks of Motorola, Inc. ®

Reg. U.S. Pat. & Tm. Off.

La page est en cours de chargement...

Motorola TLKR T7 Le manuel du propriétaire

Motorola TLKR T7 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents