Yamaha YAS-306 Le manuel du propriétaire

Catégorie
Matériel musical
Taper
Le manuel du propriétaire
Front Surround System
Owner’s Manual
Read the supplied booklet “Quick Start Guide” before using the unit.
English
EN
En 2
Contents
PREPARATION
Supplied items .......................................................................3
Features..................................................................................4
Frequently asked questions..................................................5
Part names and functions .....................................................6
Installation .............................................................................8
Connecting the unit............................................................ 10
Connecting the unit to a TV ........................................................................... 10
Connecting the unit to other devices......................................................... 11
PLAYBACK
Operations........................................................................... 12
Listening to the sound from a Bluetooth device.............. 16
Using wireless headphones to listen to audio.................. 17
NETWORKS
Networks ............................................................................. 18
Network functions and the MusicCast CONTROLLER app ..................18
Connecting to a network ................................................................................ 18
Playing back music stored on media servers (PCs/NAS)...................... 22
Listening to Internet radio.............................................................................. 23
Playing back music with AirPlay................................................................... 24
Playing back music stored on mobile devices ........................................ 25
SETTINGS
Settings................................................................................ 26
Using the TV’s remote control to adjust the unit’s volume ................ 26
Using an external subwoofer......................................................................... 29
Enabling/disabling the auto power standby function ......................... 29
Enabling/disabling the network standby function................................ 30
Enabling/disabling a wireless (Wi-Fi) connection .................................. 30
Enabling/disabling the Bluetooth function.............................................. 31
Updating the unit’s firmware ........................................................................ 31
Initializing the unit............................................................................................. 32
APPENDIX
Troubleshooting ................................................................. 33
Specifications ...................................................................... 38
About this manual
NOTE
This indicates precautions for use of the product and its feature limitations.
HINT
This indicates supplementary explanations for better use.
PREPARATION Supplied items En 3
PREPARATION
Supplied items
Make sure you have received all of the following items.
Preparing the remote control
Peel off the protection sheet before use.
Operating range of the remote control
Operate the remote control within the range as shown below. When the unit is mounted
on a wall, point the remote control at the remote control sensor on the top panel (p.9).
The unit
Remote control Batteries x 2
(AAA, R03, UM4)
Optical digital audio cable*
(1.5 m [4.9 ft])
Mounting template
Use when mounting the unit on a wall
Spacers × 2
Use when mounting
the unit on a wall
Quick Start Guide
Cover (for the TV remote repeater)
MusicCast
Setup Guide
Owner’s Manual
CD-ROM
* The China model comes with a coaxial digital audio cable rather than an optical
digital audio cable.
Remote control sensor
Within 6 m (20 ft)
PREPARATION Features En 4
Features
This front surround system is easily installed and has a built-in subwoofer for enjoying powerful and realistic sound with connection to a TV or other
devices.
* In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific type of mobile device is noted in explanations as needed.
AIR SURROUND XTREME
Enjoy 7.1 channel surround sound, which creates a wide and deep soundstage, as if speakers are positioned not only in front of, but also to the left, right, and behind the listener.
Bass extension
Enjoy powerful bass with Yamaha’s exclusive bass boosting technology, Advanced Bass Extension Processing (p.14).
Unrestricted playback of music over a network using MusicCast CONTROLLER
The free app for mobile devices*, MusicCast CONTROLLER, allows you to listen to music stored on mobile devices such smartphones, or on servers, or to listen to Internet radio
stations and many kinds of major streaming services (p.18).
This app also allows you to distribute content to other MusicCast-enabled devices for synchronized playback.
The MusicCast CONTROLLER app can also be used to perform such tasks as selecting the input source and adjusting volume.
See the “MusicCast Setup Guide”, or visit the Yamaha website for details.
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
A function that learns from the TV’s remote control
Use the TV’s remote control to turn on and off the unit or adjusting the volume (p.26).
•Clear voice
This feature makes speech, such as dialog and narration, clearer (p.14).
PREPARATION Frequently asked questions En 5
Frequently asked questions
The following section covers popular functions and frequently asked questions about the unit.
Q1
Switching between remote controls is inconvenient. Can I use the TV’s
remote control to operate the unit?
A1
Yes. You can use the unit’s learning function to “teach” it to respond to
commands from the TV’s remote control, allowing you to operate the unit
using the TV’s remote control (p.26).
This function is available only for the IR (infrared) remote control. Check your
TV’s remote control type.
Q2
Can I improve the clarity of dialogue?
A2
Yes. Dialogue in movies, TV news, sports programs, etc., can be made
clearer using the “clear voice” function (p.14).
Q3
Can I operate the unit using a smartphone?
A3
Yes. The unit can be operated with a smartphone or other mobile device
using the free mobile device app, MusicCast CONTROLLER, installed on the
device (p.18).
The MusicCast CONTROLLER app allows you to perform such tasks as
turning the unit on or off, selecting the input source, and adjusting the volume.
Q4
Can headphones be used?
A4
Yes. Bluetooth wireless headphones can be used (p.17).
Q5
Can sound playing via the unit be played on another audio device at the
same time, or vice versa?
A5
Yes. Sound from one MusicCast-enabled audio device can be played on
another MusicCast-enabled audio device at the same time. Note that all
devices must support MusicCast.
Tap in the MusicCast CONTROLLER app’s Rooms screen, and follow
the on-screen instructions to set up the master room (the source device) and
to link other rooms (devices to which audio is distributed) with the master
room. Refer to the supplied MusicCast Setup Guide, or visit Yamaha’s
website for details.
Q6
How can music content stored on a smartphone be played via the unit?
A6
Choose one of the following methods.
Connecting via Bluetooth (p.16)
This method is useful for playing music content stored on a smartphone or
other mobile device without connecting to a network.
Playing music with AirPlay (p.24)
This method is useful for those using an iPhone or other iOS device.
Playing music with the MusicCast CONTROLLER app (p.25)
This method is useful for playing music content stored on a smartphone or
other mobile device on which the MusicCast CONTROLLER app is installed.
Q7
Can Internet radio be played?
A7
Yes. Use the MusicCast CONTROLLER app’s Net Radio feature (p.23).
PREPARATION Part names and functions En 6
Part names and functions
The unit (front panel/top panel)
1 Indicators
The indicators on the top panel flash or glow, to show
the operation and setting status.
In this manual, illustrations of the nine in-line
indicators are used for explanation as necessary.
Example: When the STATUS indicator glows, and
the indicator flashes
2 CONNECT key
Use to connect the unit to a network using the
MusicCast CONTROLLER app (p.19).
3 (input) key
Select an input source to be played back (p.12).
4 (mute) key
Mute the audio output. Press the key again to unmute
(p.13).
5 / (volume +/-) keys
Adjust the volume (p.13).
6 (power) key
Turn on or off the unit (p.12).
HINT
The unit may automatically turn off when the auto power
standby function is enabled (p.29).
7 Remote control sensors
Receive infrared signals from the remote control of
the unit (p.3) or TV’s remote control (p.8).
The remote control sensors are located on the front
panel and on the top panel of the unit (p.8, 9).
8 Dual built-in subwoofers
The built-in subwoofers are located in the top part of
the unit.
9 Speakers
9
8
7
7
8
9
STATUS TV BD/DVD ANALOG NET SURROUNDBLUETOOTH
CONNECT
1
234 5 6
Keys are located in the rear
part of the unit.
: Off : Glows : Flashes
PREPARATION Part names and functions En 7
The unit (rear panel)
1 Power cable
For connecting to an AC wall outlet (p.10).
2 TV remote repeater
Used to transmit signals from the TV’s remote
control, received by the unit’s remote control sensor,
to the TV (p.8).
3 TV input jack
For connecting to a TV with an optical digital audio
cable (p.10).
4 BD/DVD input jack
For connecting to a playback device, such as a Blu-
ray Disc (BD) player, with a coaxial digital audio
cable (p.11).
5 NETWORK jack
For connecting to a network with a network cable
(p.18).
6 ANALOG input jacks
For connecting to an external device with a stereo
cable (p.10, 11).
7 SUBWOOFER OUT jack
For connecting to an external subwoofer with an RCA
mono cable (p.29).
8 SERVICE ONLY jack
Used only for after-sales servicing. This jack is not
normally used.
TV BD/DVD
NETWORK ANALOG
R
SUBWOOFER OUT
SERVICE ONLY
L
34 5 6 7 8
21
PREPARATION Installation En 8
Installation
The unit can be installed on a TV stand or mounted on a wall (p.9).
It is equipped with remote control sensors positioned to support installation on a TV stand or mounting on a wall.
Installing the unit on a TV stand, etc.
Position the unit so that the keys are on the far side of the unit.
About the TV remote repeater
The unit receives signals from the TV’s remote control via the remote control sensor
located on the front panel. It then transmits these signals from the TV remote repeater
located on the rear panel.
HINT
This function is available only when the TV’s remote control uses infrared signals.
The TV’s remote control can be used even when the unit is turned off as long as the unit’s power cable is
plugged into an AC wall outlet.
Cautions
Do not stack the unit and a BD player or other device directly on each other. Doing so may cause a
malfunction due to vibrations.
Do not hold the speaker portion (fabric parts) on the front and the top of the unit.
The unit contains non-magnetic shielding speakers. Do not place magnetically sensitive items (hard
disk drive, etc.) near the unit.
Depending on your installation environment, it may be better to connect the unit and external devices
before installing the unit.
Remote control sensor (front panel)
Keys
Caution
Position the unit more than 5 cm (2 in) away from the TV to ensure proper transmission of signals from
the remote control to the remote control sensor on the TV.
TV remote repeater
TV’s remote control
More than 5 cm (2 in)
TV remote control sensor
PREPARATION Installation En 9
Mounting the unit on a wall
Mount the unit on the wall so that the keys face
upwards.
How to mount the unit on the wall
1 Attach the mounting template on a wall and mark
for the screw holes.
2 Remove the mounting template from the wall,
then install commercially available screws (as
illustrated below) at the points marked on the
wall.
3 Peel off the backing paper from the spacers and
attach the adhesive face to the unit as illustrated
below.
4 Hang the unit on the screws.
Using the supplied cover (for the TV remote
repeater)
When the unit is mounted on a wall, the TV remote
repeater may appear white. If this presents a distraction
while watching TV, attach the supplied cover to the TV
remote repeater.
Cautions
When mounting the unit on a wall, all installation work must be
performed by a qualified contractor or dealer. The customer must
never attempt to perform this installation work. Improper or
inadequate installation could cause the unit to fall, resulting in
personal injury.
To avoid falling the unit, attach the unit to a dry wall.
Make sure you use commercially available screws that can
support the weight of the installation (specified in Step 2 on the
right). Using clamps other than specified screws, such as short
screws, nails, and two-sided tape, may cause the unit to fall.
Fix the cables in place where they will not become loose. If your
foot or hand accidentally gets caught on a loose cable, the unit
may fall.
Do not lean on the unit or apply excessive force to the top of the
unit. Doing so may cause the unit to fall.
Check that the unit is fixed securely after the installation. Yamaha
will bear no responsibility for any accidents caused by improper
installations.
Keys
Remote control sensor
(top panel)
Tapes or thumbtacks
Mounting template (supplied)
Screw
holes
7 to 9 mm
(1/4" to 3/8")
13 to 15 mm (1/2" to 5/8")
4 mm (#8)
20 mm (3/4")
or more
Spacers
Mounting holes
on bottom of the
unit
PREPARATION Connecting the unit En 10
Connecting the unit
The way in which the unit is connected will vary depending upon the type of jacks with
which the TV or playback devices (BD/DVD player, etc.) are equipped, and how the TV
and playback devices are connected. Refer to the connection examples on pages 10
and 11 to connect the unit.
1 Be sure that the unit’s power cable is not plugged into an AC wall
outlet.
2 Refer to the connection examples on pages 10 and 11 to connect the
unit to a TV and playback devices.
To connect the unit using the supplied optical digital audio cable, remove the cap,
confirm orientation, and then plug it firmly into the TV input jack.
HINT
Connect the supplied optical digital audio cable to the TV input jack, a coaxial digital audio cable to
the BD/DVD input jack, and a stereo cable to the ANALOG input jacks.
3 Plug the unit’s power cable into an AC wall outlet.
4 Set TV volume as low as possible, or disable output from the TV’s
built-in speaker(s).
HINT
If a setting to disable the speaker output is not available on your TV in step 4, you may disable it by
connecting headphones to the headphones jack on the TV. For details, refer to the manuals of the TV.
The TV and BD/DVD input jacks support the following audio signals.
− PCM (2 channel)
− Dolby Digital (up to 5.1 channel)
− DTS Digital Surround (up to 5.1 channel)
Connection method 1: Connect the unit to a TV
If the TV has an optical audio output jack
Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,
and the other to the optical digital audio output jack on the TV.
If the TV has no optical audio output jack
Use an optional stereo cable to connect the unit’s ANALOG input jacks to the analog
audio output jacks on the TV.
To watch TV or play content from other devices
Caution
Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug or
terminal.
Connecting the unit to a TV
Change the
TV's input
source
When watching
TV
Switch to the input source for watching TV (select
the same input source used before the unit was
connected to the TV).
When playing
content from a
device
Switch to the input source for the BD/DVD player
or other device.
Select the unit’s input source
Press the input keys on the unit's remote control
to change the unit’s input source.
: :
NOTE
When sound from the TV cannot be output in a digital
audio format (Dolby Digital or DTS Digital Surround), be
sure that the TV’s digital audio output is set to PCM
(2ch).
A
B
A
B
TV BD/DVD
NETWORK ANALOG
R
SUBWOOFER OUT
L
TV
Optical digital audio
output
or
Analog audio output
(supplied)
HDMI input HDMI output
Playback device
(such as a BD/DVD player)
A
B
PREPARATION Connecting the unit En 11
Connection method 2: Connect the unit to a playback device
(BD/DVD player, etc.)
Use this method to connect the unit to a playback device when it cannot be connected to
the TV as explained with method 1 because the TV has no optical digital audio output
jack or analog audio output jacks.
This method can also be used to connect the unit to a playback device, after it has been
connected to the TV, when sound from a BD/DVD player or other device connected to
the TV is not output as surround sound.
If the playback device has an optical digital audio output jack
Connect one end of the supplied optical digital audio cable to the unit’s TV input jack,
and the other to the optical digital audio output jack on the playback device.
If the playback device has no optical digital audio output jack
Connect one end of an optional coaxial digital audio cable to the unit’s BD/DVD input
jack, and the other to the coaxial digital audio output jack on the playback device.
To watch video from a playback device connected to the TV
Connect devices such as CD/DVD players or game consoles to the unit for dynamic
sound playback. Use an optical digital audio cable, coaxial digital audio cable, or stereo
cable to connect audio output jack(s) on each playback device to input jack(s) on the
unit.
To watch video from an external device
Change the TV's input
source
Switch to the input source for the BD/DVD player or
other playback device connected to the TV.
Select the unit’s input
source
Press the input keys on the unit's remote control to
change the unit’s input source.
: :
A
B
A
B
TV BD/DVD
NETWORK ANALOG
R
SUBWOOFER OUT
L
Playback device
(such as a BD/DVD player)
Optical digital audio
output
or
Coaxial digital audio
output
(supplied)
A
B
Connecting the unit to other devices
Change the TV's input
source
Switch to the input source for the external device.
Select the unit’s input
source
To play sound from an external device, press the input
key (ANALOG, TV, or BD/DVD) that corresponds to the
jack(s) on the unit to which the external device is
connected.
NOTE
When sound from the external device cannot be output in a
digital audio format (Dolby Digital or DTS Digital Surround), be
sure that the device’s digital audio output is not set to PCM
(2ch).
If volume can be adjusted using the device connected to the
unit’s ANALOG input jacks, set that device's volume to the
same level as that of other devices connected to the unit’s TV
and BD/DVD input jacks to prevent volume from being louder
than expected.
TV BD/DVD
NETWORK ANALOG
R
SUBWOOFER OUT
L
CD/DVD player, game console, etc.
Optical digital audio
output
Coaxial digital audio
output
Analog audio output
PLAYBACK Operations En 12
PLAYBACK
Operations
Remote control signal transmitter
Transmits infrared signals.
(power) key
Turns on or off the unit.
Turned on
Turned off (network standby function enabled,
p.30)
Turned off
HINT
When the unit is turned on for the first time after purchase,
the indicator flashes slowly.
While the indicator is flashing, network settings from
your iOS device (an iPhone, etc.) can be applied to the unit
to connect the unit to a wireless network. For details on
settings, see “Playing back music with AirPlay” (p.24). Press
any key on the remote control to cancel this function if it will
not be used.
The indicator does not flash if the unit’s NETWORK jack
is connected to a router using a cable (wired connection).
The indicator for the last input
source selected glows green.
Indicates the surround setting, and network
(p.18) or Bluetooth (p.16) connection status.
Glows (red)
1
TV BD/DVD ANALOG NETBLUETOOTH
SURROUND
SURROUND
PLAYBACK Operations En 13
SUBWOOFER (+/-) keys
Adjust the volume of the subwoofer.
VOLUME (+/-) keys
Adjust the volume of the unit.
MUTE key
Mute the audio output. Press the key again to
unmute.
Volume down (–) Volume up (+)
Volume down (–) Volume up (+)
Flash (on mute)
4
PLAYBACK Operations En 14
BASS EXTENSION key
Enable/disable the bass extension function. When
this function is enabled, you can enjoy a powerful
bass sound with the Yamaha original bass boost
technology “Advanced Bass Extension
Processing.”
CLEAR VOICE key
Enable/disable the clear voice function.
When this function is enabled, human voices such
as lines in movies and TV shows, or news and
sport commentary, are played clearly.
AUDIO DELAY key
Adjust the audio delay to synchronize the sound
with the video when the video image on the TV
may seem delayed with respect to the sound.
Follow the procedure below to adjust the audio delay.
NOTE
The audio delay cannot be adjusted in the following
situations.
− When Bluetooth or NET is selected as the input source.
− When sound is distributed from the unit to one or more
other MusicCast-enabled devices.
1 Hold down the AUDIO DELAY key for more
than 3 seconds.
The indicator at far left flashes.
2 Press the SUBWOOFER (+/-) key to adjust the
audio delay.
Pressing the SUBWOOFER (+) key delays the
audio output timing.
3 To finish the adjustment, press the AUDIO
DELAY key.
HINT
The adjustment will be finished automatically if no
operations are performed for 20 seconds.
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
Enabled: Flashes three times and goes out
Disabled: Flashes once and goes out
(–) (+)
6
PLAYBACK Operations En 15
8
9
HINT
The unit is able to play the following types of audio signal.
The indicators do not glow when analog or PCM audio signal
is input.
− Analog signal
− PCM (2 channels)
− Dolby Digital
− DTS Digital Surround
DIMMER key
Change the brightness of the indicators. Each time
the key is pressed, the brightness of the indicators
changes as follows.
Dim (default setting)OffBright
Indicators glow brightly just after operation and
change to the specified brightness after a few
seconds.
INFO key
While the INFO key is held down, status, including
the type of audio signal being input and whether
the clear voice function is enabled or disabled, can
be confirmed by the glowing of indicators.
Type of audio signal being input
DTS Digital Surround
Dolby Digital
Dolby Pro Logic II is used (when 2-channel
stereo signal is played in surround)
Unit functions and positioning
The bass extension function is enabled
The clear voice function is enabled
When positioned on top of something, such as a TV stand
When mounted on a wall
Green
Green
Green
Green
Green
Green
Blue
LEARN key
The unit enters learning mode, in which it can
learn TV remote control commands (p.26).
7
8
9
PLAYBACK Listening to the sound from a Bluetooth device En 16
Listening to the sound from a
Bluetooth device
Audio from a Bluetooth device, such as a mobile device or a digital music player, can be
played over a wireless connection.
NOTE
Adjust the volume level of the Bluetooth device as required.
When the network standby function (p.30) is enabled, the unit turns on with operation of the Bluetooth
device.
Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each other.
HINT
See documentation supplied with your Bluetooth device for more information.
1 Press the BLUETOOTH key on the unit’s remote control to select
Bluetooth as the input source.
The BLUETOOTH indicator on the unit glows.
If a Bluetooth device has been connected before, the unit will connect to the last
connected device when the BLUETOOTH key is pressed. Terminate this
connection to connect a new device.
2 Enable the Bluetooth function on the Bluetooth device.
3 Select “YAS-306 xxxxxx Bluetooth”* in the Bluetooth device list on the
device.
* If the unit is registered as a MusicCast-enabled device (p.19), the room name (network name)
is displayed.
If a passkey (PIN) is required, enter the number “0000”.
When the connection is established, the indicator on the unit glows.
The indicator or a completion message is displayed on the Blu etooth device.
4 Play back a song on the Bluetooth
device.
Terminating Bluetooth connection
Perform one of the following operations to terminate Bluetooth connection.
The indicator on the unit turns off when the connection is terminated.
Turn off the Bluetooth function on the Bluetooth device.
Press the BLUETOOTH key on the unit’s remote control for more than 3
seconds.
Switch the unit's input source to any input source other than Bluetooth.
Turn off the unit.
Bluetooth device (such as
a mobile device)
YAS-306 xxxxxx Bluetooth
PIN 0000
123
456
789
0
Blue
PLAYBACK Using wireless headphones to listen to audio En 17
Using wireless headphones to
listen to audio
Bluetooth wireless headphones can be used to listen to audio played via the unit. Sound
is transmitted to the wireless headphones using the MusicCast CONTROLLER app
installed on a mobile device.
NOTE
•Use a Bluetooth device that supports the A2DP profile.
Audio input using AirPlay, or from a Bluetooth device, cannot be transmitted to other Bluetooth devices for
playback.
Perform Bluetooth connection with the device and unit within 10 m (33 ft) of each other.
HINT
Audio will also be output from the unit.
This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
See documentation supplied with your Bluetooth device for more information.
1 Use the MusicCast CONTROLLER app to connect the unit to a
network, and register the unit as a MusicCast-enabled device (p.19).
2 Use the MusicCast CONTROLLER app to play a song (via any device
other than a Bluetooth device).
3 Configure a Bluetooth device (wireless headphones, etc.) for
Bluetooth connection with the unit.
4 Tap in the MusicCast
CONTROLLER app’s
playback screen.
5 Tap “Bluetooth
Transmission”.
6 Enable the Bluetooth
Transmission function and
choose a destination
Bluetooth device (wireless
headphones, etc.).
When a connection is
established, the indicator on
the unit will glow.
7 Tap “Done”.
Audio is output from the destination Bluetooth device (wireless headphones, etc.).
Terminating Bluetooth connection
Perform one of the following operations to terminate Bluetooth connection.
The indicator on the unit turns off when the connection is terminated.
•Terminate Bluetooth connection from the Bluetooth device, or turn off the
Bluetooth device.
Disable the MusicCast CONTROLLER app’s Bluetooth Transmission function.
Press the BLUETOOTH key on the unit’s remote control for more than 3
seconds.
Turn off the unit.
Bluetooth speakers/
headphones
Tap
Tap
Blue
NETWORKS Network functions and the MusicCast CONTROLLER app En 18
NETWORKS
Networks
A network connection allows you to listen to Internet radio stations or music streaming
services, and to use AirPlay to play music files, or to play music files stored on your
computer (media server) via this unit.
Most playback requires the “MusicCast CONTROLLER” app for mobile devices. Install
and use the MusicCast CONTROLLER app on your mobile device to play music files.
Proceed from network connection to playback in the following sequence.
* AirPlay can be used to play music files without using the MusicCast CONTROLLER
app.
NOTE
To use network function, the unit, your PC and mobile device must be connected to the same router.
When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and mobile device to the same SSID.
Some security software installed on your computer, or network device settings (such as a firewall), may
block the unit’s access to your computer or Internet radio stations. Should this occur, change security
software and/or network device settings.
A network connection cannot be established if the MAC address filter on your router is enabled. Check
your router’s settings.
To configure your router’s subnet mask manually, apply the same subnet used by this unit to all devices.
Use of a broadband connection is recommended when using Internet services.
The unit cannot be connected to a network that requires manual setup. Connect the unit to a DHCP-
enabled router.
Choose a wired or wireless network connection based on your network environment.
Wired network connections
To use a wired network connection, connect the unit to a router via an STP network
cable (category 5 or higher straight cable; not supplied).
HINT
If network connections or settings are changed, use the MusicCast CONTROLLER app to connect the unit
to a network and register the unit as a MusicCast-enabled device again (p.19).
Network functions and the MusicCast CONTROLLER
app
a Choose a wired network connection (p.18) or a wireless network connection
(p.19).
b Use the MusicCast CONTROLLER app to connect the unit to a network, and
register the unit as a MusicCast-enabled device (p.19).
c Use the MusicCast CONTROLLER app to play music over a network* (p.22 to
25).
Connecting to a network
NETWORK
LAN
WAN
Internet
PC
Network cable
Modem
Mobile device
Router
Network Attached
Storage (NAS)
NETWORKS Connecting to a network En 19
Wireless network connections
Connect the unit to a wireless router (access point) to use a network.
Refer to the following for instructions on connecting to a wireless router (access point).
Using the MusicCast CONTROLLER app (p.19)
Applying iOS device (iPhone, etc.) settings to the unit (p.24)
The indicator on the unit glows when the unit is connected to a wireless network.
NOTE
If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
Connecting with the MusicCast CONTROLLER app
(registering the unit as a MusicCast-enabled device)
Install the MusicCast CONTROLLER app on your mobile device to connect the unit to a
network and register it as a MusicCast-enabled device.
HINT
Confirm that your mobile device is connected to your home router before beginning.
This section uses MusicCast CONTROLLER app screens displayed in English on an iPhone as examples.
MusicCast CONTROLLER app screens and menu labels are subject to change without prior notice.
1 Install the MusicCast CONTROLLER app on your mobile device, and
open the app.
Search for “MusicCast CONTROLLER” on the App Store or Google Play.
2 Tap “Setup”.
Internet
Wireless router (access point)
Modem
Mobile device
Glows (green)
NETWORKS Connecting to a network En 20
3 Turn on the unit, and then tap “Next”.
4 Hold down the CONNECT key until the indicator on the unit starts
flashing.
5 Follow the on-screen instructions to configure network settings.
HINT
When a screen like that below is displayed, follow the on-screen instructions to configure network
settings.
When a screen like that at left below is displayed, select the network to which the unit will be
connected and enter the router’s password (encryption key).
The router’s password (encryption key) is often noted on the router itself. Refer to documentation
supplied with the router for details.
1. Use the Home button on your mobile device to return
to the Home screen.
2. Select “Wi-Fi” from “Settings”.
3. Select “MusicCastSetup” from “CHOOSE A
NETWORK...”.
4. Use the Home button to return to the MusicCast
CONTROLLER app.
1 / 1

Yamaha YAS-306 Le manuel du propriétaire

Catégorie
Matériel musical
Taper
Le manuel du propriétaire