NOTEBOOK
DOCKING STATION
(DC DOCK5) (DC DOCK6)
User’s Manual
Safety Instructions
Always read the safety instructions carefully
À‹ Keep this user’s manual for future reference
À‹ Keep this equipment away from humidity
À‹ Lay this equipment on a reliable flat surface before setting it up
À‹ If any of the following situation arises, get the equipment checked by a service
technician:
o The equipment has been exposed to moisture
o
The equipment has been dropped and damaged
o The equipment has obvious sign of breakage
o The equipment has not working well or you cannot get it work according to
this user’s manual.
Contents
A. INTRODUCTION
B. SYSTEM REQUIRMENTS
C. HARDWARE APPEARANCE AND CONNECTION
D. SOFTWARE INSTALLATION
E. OPERATIONAL NOTES ABOUT THE PORTS ON THE DOCKING STATION
A. INTRODUCTION
This USB 2.0 Docking Station (DC DOCK5 / DC DOCK6) is a unique expansion
unit specially designed to accompany notebook or desktop PC which has extra
connectivity demands. With only one USB port required form a notebook/desktop PC,
not only USB but also conventional SIO, LAN, PS/2, e SATA, Smart Card reader ,Audio,
USB 2.0 HUB and 53 in 1 Card reader peripheral devices can be accessed freely.
DC DOCK5 / DC DOCK6 allows you to add multiple high performance USB 2.0
peripheral devices to your PC. Moreover, this product is fully backwards compatible with
the USB Revision 1.1 products, which means your previous USB 1.1 devices can
continue to function as well.
Features
Àz Compliant with Universal Serial Bus Specifications Revision 2.0 (Data Rate 1.5/
12/ 480 Mbps)
Àz Two or Five USB 2.0 downstream facing ports (Type A receptacle)
Àz One PS/2 keyboard port
Àz One PS/2 mouse port
Àz One e SATA port
Àz One serial port (DB9-pin male)
Àz One 10/100Base Ethernet LAN port (RJ-45)
Àz One 53in one Card reader
.
B. SYSTEM REQUIRMENTS
SUPPORTED O.S.:
Function
O.S.
Docking Station
Windows® 98se Vendor Support*2
Windows® ME Vendor Support*2
Windows® 2000 Vendor Support
Windows® XP Vendor Support
Windows® Vista Vendor Support
*1. The USB-PS/2 is a human interface device (HID) with the driver provided from the
OS of Microsoft. Also the hub driver is from the OS. The rest peripherals ‘drivers are
provided within the accompanied CD-ROM.
*2.USB Audio port cannot function under Windows® 98se/ME due to the incompatibility
issue of driver.
Specifications
Model
DC DOCK6
DC DOCK5
RS-232
Yes
Yes
Memory Card
Reader
53 in 1
Smart Card
Reader
USB 2.0 HUB
4 Port
2 Port
10/100M LAN
Yes
Yes
Audio
(2 Channel)
Yes
E-SATA
Yes
Yes
PS2(Keyboard
Mouse)
Yes
Yes
Environments
Operating temperature: 0°C~40°C
Storage temperature: -10°C~80~°C Humidity:90%RH(No condensing)
Emission CE FCC
POWER AC Input 100 V~240V
DC Output 5V, 2.0A
C. HARDWARE APPEARANCE and CONNECTION
LED Status Indicators
Please refer to Figures 1 and 2 for the LED functional indicators and layout of ports
of DC DOCK5 / DC DOCK6 docking station.
Model
LED
Color
Descriptions
1 Red
Turned on when the docking station is powered.
DC DOCK5 /
DC DOCK6
2
Green
Indicate the card reader working state
Àz Connect power adapter to a household AC outlet and plug the adapter’s DC jack
into the DC socket on the side of docking station.
Àz Plug the flat end (Type A receptacle) of the USB cable into a free USB port on the
NB/PC.
Àz Plug the square end (Type B receptacle) of the USB cable into the USB upstream
connector located on the side of docking station.
Àz
At this point, Windows® OS will automatically find the docking station and start
installing its drivers (called enumeration). Windows® OS will prompt you to act
along the driver installation process. See the next section for details on how to install
the drivers and AP
D. SOFTWARE INSTALLATION
Please make sure that NB/PC is powered on properly and the docking station is also
powered and connected to the NB/PC’s USB port with a USB2.0 cable (included in the
package). The NB/PC will start the enumeration process automatically. If this is the first
time that a docking station connected to the NB/PC, the OS will proceed to install all the
required drivers. OS will prompt user to take some action if needed. The driver
installation process is only needed for the very first time of connecting docking station
and the NB/PC and is briefly introduced in this section.
Please note that only the installation processes of Windows® XP are demonstrated
here. For Windows® 98se and Windows® ME and Windows® 2000, the processes are
similar, just follow the prompts on the screen can finish the installation without a
problem since the OS will take care everything automatically.
Please make sure the driver CD-ROM is placed in the CD-ROM drive before
proceed.
Software Installation in Windows®
®
XP
For Windows
®
XP, there are two drivers which need to install from the driver
CD-ROM: (1). USB-LAN, (2) USB-serial port, The drivers of rest devices are provided
by Windows
®
XP and will be installed without user’s care.. Along the installation.
Figure 18. Select Install the software automatically, and click Next > to start the driver
installation. Note that the name (Au9520_v1.2.4.16.exe) of the device may
vary due to the update of newest driver. It will not affect the function and
installation of the device.
3. Click Finish to end the wizard for driver of USB Smart Card reader.
USB-Serial Driver installation, computer systems based on tips completed.
.
Choose” install from a list or specific location (Advanced)” Click Next to continue
Click “Browse” Choose the driver location.
Click next
Click “Finish” to close the wizard
USB-LAN Driver installation, computer systems based on tips completed.
Choose “Install from a list or specific location (Advanced)” Click next to continue
Click “Browse” Choose the driver location.
Click next to continue
Click Finish to close the wizard
Upon the completion of the installation of these three procedures, restart the computer in
the “Device Manager” will see the following devices.
The end. Thank you for using the product.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Digitus DC DOCK6 Manuel utilisateur
- Taper
- Manuel utilisateur
- Ce manuel convient également à
dans d''autres langues
- English: Digitus DC DOCK6 User manual
Autres documents
-
Targus Universal Notebook Docking Station Mode d'emploi
-
-
-
-
Acer ACP45 USB port replicator Manuel utilisateur
-
Fujitsu Stylistic Q702 Manuel utilisateur
-
Fujitsu KA02066D105 Manuel utilisateur
-
Asus HZ-1 Mode d'emploi
-
Aaeon RTC-700B Manuel utilisateur
-
Kensington SD100 spécification