Silvercrest SSMC 600 B1 Manuel utilisateur

Catégorie
Mélangeurs
Taper
Manuel utilisateur
STANDMIXER / BLENDER / BLENDER SSMC 600 B1
IAN 360503_2010
BLENDER
Mode d’emploi
BLENDER
Operating instructions
BLENDER
Gebruiksaanwijzing
STOLNÍ MIXÉR
Návod k obsluze
BLENDER
Betjeningsvejledning
MIXÉR
Návod na obsluhu
STANDMIXER
Bedienungsanleitung
MIKSER KIELICHOWY
Instrukcja obsługi
BATIDORA DE VASO
Instrucciones de uso
GB / IE Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 19
FR / BE Mode d’emploi Page 37
NL / BE Gebruiksaanwijzing Pagina 59
CZ Návod k obsluze Strana 77
PL Instrukcja obsługi Strona 93
SK Návod na obsluhu Strana 111
ES Instrucciones de uso Página 127
DK Betjeningsvejledning Side 145
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
P
0
1
2
3
4
5
GBIE 1 SSMC 600 B1
Content
Introduction ...................................................2
Intended use ..................................................2
Package contents ..............................................2
Description of the appliance .....................................3
Technical data .................................................3
Safety instructions .............................................4
Unpacking ....................................................6
Setting up .....................................................6
Operation ....................................................7
Fitting and filling the blender ............................................... 7
Selecting the speed setting ................................................. 8
Filling while in use ........................................................ 9
Removing the blender ..................................................... 9
Useful tips ....................................................9
Recipes ......................................................10
Banana shake ..........................................................10
Vanilla shake ...........................................................10
Cappucino shake ........................................................ 10
Tropical mix ............................................................10
Nut nougat shake .......................................................11
Carrot shake ...........................................................11
Blackcurrant mix ........................................................ 11
Hawaii shake ........................................................... 11
Fruity pineapple and strawberry mix .........................................11
Andalusian cold soup (gazpacho) ..........................................12
Cleaning .....................................................12
Cleaning the blender ..................................................... 13
Cleaning the motor block ................................................. 15
Storage .....................................................15
Disposal .....................................................15
Kompernass Handels GmbH warranty ............................16
Service ................................................................17
Importer ...............................................................17
2 GBIE SSMC 600 B1
Introduction
Congratulations on the purchase of your new appliance.
You have selected a high-quality product. These operating instructions are a
part of this product. They contain important information on safety, usage and
disposal. Before using the product, familiarise yourself with all operating and
safety instructions. Use the product only as described and only for the specified
areas of application. In addition, pass these documents on, together with the
product, to any future owner.
Intended use
This appliance is intended exclusively for
mixing, puréeing and stirring foods as well as crushing ice cubes,
use exclusively in normal domestic amounts and only for private use in a
domestic environment in dry rooms.
This appliance is not intended for
chopping herbs, onions, meat and hard food components such as nuts,
pits, large seeds or stalks,
making nut puree,
the processing of materials that are not foodstuffs,
commercial or industrial use,
for use in damp environments or outdoors,
processing hot/boiling liquids.
Use only the accessories and spare parts that are specified for this appliance.
Other parts may not be adequately suitable or safe!
Package contents
After unpacking, check to ensure all items are available. The package contains:
Motor block, with power cable and plug
Blender
Lid
Measuring cap
Operating instructions
GBIE 3 SSMC 600 B1
Description of the appliance
1 Measuring cap
2 Lid
3 Blender
4 Cutting blades
5 Switch
6 Motor block
7 Cable retainer
8 Scale
9 Rubber lid seal
Technical data
Nominal voltage 220 240 V ∼ (alternating current), 50 60 Hz
Nominal power consumption 600 W
Storage capacity approx. 2.3 litres
Max. fill capacity 1.75 litres
Protection Class II / (double insulation)
CO time 3 Minuten
All of the parts of this appliance that come into
contact with food are food-safe.
The CO time (continuous operation time) is the amount of time an appliance can
be operated without the motor overheating and becoming damaged. When the
specified CO time has been reached, the appliance must be switched off until
the motor has cooled down to room temperature.
4 GBIE SSMC 600 B1
Safety instructions
DANGER! ELECTRIC SHOCK!
Ensure that the appliance, the power cable and the power
plug are never immersed in water or other liquids.
Use the appliance only in dry rooms; never use it outdoors
or in damp environments.
Ensure that the power cable never becomes wet or damp
during operation. Route the power cable in such a way that
it cannot become trapped or damaged in any way.
Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
Always remove the plug from the power socket after use.
Switching off the appliance is not sufficient because the
appliance receives power as long as the power plug is
connected to the socket.
Check to ensure that the appliance is in a serviceable
condition before use. The appliance may not be used if it
shows signs of damage, especially to the motor block or the
blender attachment.
Remove the plug from the socket immediately if you notice
unexpected smells or noises coming from the appliance
while it is in use or if there is an evident malfunction.
WARNING! RISK OF INJURY!
NEVER insert your hand or fingers into the blender, especially
when it is in use. The cutting blades are extremely sharp!
DO NOT remove the lid when the appliance is in operation.
To ensure you can react immediately in the event of danger,
never leave the appliance running unattended.
Do not insert cutlery items or mixing tools into the blender while
the appliance is in use. There is a considerable risk of injury if
these come into contact with the swiftly rotating cutting blades!
GBIE 5 SSMC 600 B1
WARNING! RISK OF INJURY!
Children should be supervised to ensure that they do not
play with the appliance.
Never use the appliance for purposes other than those described
in these instructions.
Risk of injury if appliance is misused.
The appliance should always be disconnected from the mains
when not supervised and before assembly, disassembly or
cleaning.
This appliance is not to be used by children.
The appliance and its mains cable must be kept away from
children.
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning safe use of the appliance, and if they are aware
of the potential risks.
Do not allow children to play with the appliance.
Be careful when handling the appliance. The cutting blades
are extremely sharp!
Take care when emptying the blender! The cutting blades
are extremely sharp!
Take care when cleaning the appliance! The cutting blades
are extremely sharp!
Switch the appliance off and disconnect the plug from the
power supply before changing accessories or getting hold
of parts that move during operation.
Always make sure that the blender is switched off before
removing the jug from the motor block!
Use the blender only with the supplied motor block!
6 GBIE SSMC 600 B1
CAUTION! MATERIAL DAMAGE!
Do not use the appliance in direct sunlight or near any
heatgenerating appliances.
NEVER fill the blender with boiling liquids or other foods!
Allow these to cool to a lukewarm temperature.
NEVER operate the appliance when it is empty, i.e. without
ingredients in the blender attachment.
Unpacking
Remove all packaging materials or protective films from the appliance. Retain
the packaging, so that you can store the appliance safely or send it by post,
e.g. if it needs to be repaired.
Before using the appliance, check that it is free of damage; check also that
the power cable and plug as well as all accessories and appliance parts are
undamaged.
Clean all components carefully before using the appliance for the first time
(see “Cleaning”).
Setting up
Once all components have been cleaned as described in the section “Cleaning”:
Position the appliance so that,
that the mains cable passes through the recess at the rear of the
appliance,
the power plug is immediately accessible, so that it can be quickly
withdrawn in the event of danger,
that it is stable and not liable to slip, and so that the sucker feet can attach
firmly and the appliance cannot tip over due to vibration,
that the mains cable is not in the working area and thus does not present
a risk of being inadvertently snagged and tipping the appliance over.
GBIE 7 SSMC 600 B1
Operation
WARNING!
The motor switches off automatically as soon as the blender 3 is removed
from the motor block 6 or the lid 2 is opened. In such cases it may be
easy to forget that the machine is still switched on. The motor will then start
unexpectedly as soon as the blender attachment 3 is fitted or the lid 2 is
closed again:
Therefore:
Do not insert the power plug into the wall socket until the blender 3 is
filled and mounted with its lid fitted and closed.
Before fitting the blender, always check to see that the appliance is
switched off or that the power plug has been removed.
Switch the appliance off first, pull the plug out and wait until the motor has
come to a standstill before removing the blender 3 or opening the lid 2.
Fitting and filling the blender
1) Remove the blender 3 from the motor block 6 in a vertical, upward motion.
2) Remove the lid 2 by rotating it anticlockwise towards position (see Fig 1)
until you can pull it upwards.
3) Fill the blender 3 to at least to the lowest line of the scale 8 and at most to
the MAX mark. For optimum results, we recommend the following maximum
filling quantities:
Food Max.
filling
quantity
Recom-
mended
level
Recommended
processing time
Liquids 1750 ml 1‒3 60 sec.
Yoghurt-based drinks 1250 ml 2‒5 90 sec.
Milkshakes/
smoothies 1250 ml 2‒5 60‒90 sec.
Pancake mix 1250 ml 3‒5 90 sec.
Baby food 750 ml 5 3 min.
Mayonnaise 2 eggs
250 ml oil 3‒5 90‒120 sec.
Vegetable soup 1500 ml 3‒5 3 min.
Ice cubes 250 ml P 12x
4) Press the lid 2 firmly down onto the blender 3. Close the lid 2 by turning
it clockwise to position until it audibly engages (see Fig. 2). Ensure that
the pouring spout on the blender 3 is closed. The motor cannot start until
the lid2 is fitted flush.
8 GBIE SSMC 600 B1
Fig. 1 Fig. 2
5) Press the measuring cap 1 into the lid as far as the stop.
6) Place the completely filled and closed blender 3 with the handle to the
right on the motor block 6. Make sure that the arrow T on the blender 3
points to the S arrow on the motor block 6. Turn the blender 3 slightly
back and forth if it does not immediately sit properly. The motor cannot start
until the blender 3 is fitted flush to the motor unit.
Selecting the speed setting
Once the blender 3 is filled and sitting completely closed on the motor block 6,
you can switch on the appliance.
Set the switch 5 to
Level 1 – 3
for liquids or soft foodstuffs, for mixing, blending and stirring
Level 3 – 5
for more solid foods or for chopping
Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch 5 does not lock in this
position. Therefore, hold the switch 5 in this position for short periods only.
NOTE
Fill the blender 3 with a maximum of 250 ml of ice cubes.
Otherwise, the ice cubes will not be crushed optimally.
GBIE 9 SSMC 600 B1
Filling while in use
WARNING!
If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose. Do NOT open the lid 2.
Do not insert cutlery items or mixing tools into the blender 3 while the
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use,
1) Remove the measuring cap 1 from the lid 2.
2) Add the ingredients.
3) Press the measuring cap 1 back into the lid.
Removing the blender
If you want to remove the blender 3 from the motor block 6:
1) Always start by setting switch 5 to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender 3 off the motor block 6. Remove the blender 3 from the motor
block 6 in a vertical, upward motion.
Useful tips
To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender 3 rather than a single large portion.
When processing firm ingredients, cut them into small pieces (2 3 cm).
Add at least 50 ml of liquid when pureeing fruit or vegetables.
Add thicker ingredients (such as yoghurt) into the blender 3 first. If any of
ingredients are not picked up during mixing, remove the blender 3 from the
motor block 6, remove the lid 2 and stir the ingredients with a suitable
implement, such as a spoon. Replace the blender 3 back on the motor block
6 with the lid 2 closed and continue mixing.
When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
When stirring firm or very viscous foods, it can be helpful to use the level P to
avoid a blocking of the cutting blades 4.
10 GBIE SSMC 600 B1
NOTE
Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
Recipes
Banana shake
2 bananas
approx. 2 tbsp. sugar
(depending on the ripeness of the bananas and personal taste)
½ l milk
1 dash of lemon juice
Peel the bananas and liquidise them at level 2. Gradually add the milk, then the
sugar and the lemon juice. Keep mixing everything until you have a smooth and
uniform liquid. Serve the shake chilled.
Vanilla shake
¼ l milk
250 g vanilla ice cream
125 g ice cubes
1½ tsp. sugar
Crush the ice cubes using the level P. Place the remaining ingredients into the mixer.
Mix everything at Level 2 until the liquid has a smooth consistency.
Cappucino shake
65 ml cold espresso (or a very strong coffee)
65 ml milk
15 g sugar
65 g vanilla ice cream
100 g ice cubes
Crush the ice cubes using the level P. Add the espresso, milk and sugar. Mix
everything together at level 2 until the sugar has dissolved. Finally, add the
vanilla ice cream and then briefly mix everything together at level 1.
Tropical mix
125 ml pineapple juice
60 ml papaya juice
50 ml orange juice
½ small tin of peaches with juice
125 g ice cubes
Crush the ice cubes using the level P. Place all ingredients into the mixer and
blend them together at level 3.
GBIE 11 SSMC 600 B1
Nut nougat shake
½ l milk
200 g nut nougat spread
1 scoop of vanilla ice cream
50 ml cream
Add all the ingredients to the blender and mix at level 3 until everything is evenly
blended together.
Carrot shake
300 ml apple juice
500 ml carrot juice
4 tbsp. cooking oil (wheatgerm oil or rapeseed oil)
4 tbsp. of lemon juice
Powdered ginger
Pepper
Add the apple juice, cooking oil and lemon juice into the blender and mix
everything together at level 2. Then add the carrot juice and mix everything
together at level 2. To finish, add the powdered ginger and pepper to taste.
Blackcurrant mix
2 tsp. honey
2 bananas
¼ l buttermilk
¼ l blackcurrant juice
Place all ingredients into the mixer and blend them together at level 3.
Hawaii shake
4 bananas
¼ l pineapple juice
½ l milk
2 tbsp. honey
¼ l rum
Peel the bananas and liquidise them at level 2. Then add the other ingredients
and mix everything together at level 1.
Fruity pineapple and strawberry mix
250 ml pineapple juice
200 g strawberries
300 ml apple juice
4 ice cubes
Wash the strawberries and remove the green parts. Crush the ice cubes using
the level P. Liquidise them at level 2. Then add the other ingredients and mix
everything together at level 1.
12 GBIE SSMC 600 B1
Andalusian cold soup (gazpacho)
½ cucumber
1 large tomato
1 green pepper
½ onion
1 garlic clove
½ white bread roll
½ tsp. salt
1 tsp. red wine vinegar
1 tbsp. olive oil
Cut the vegetables into pieces approx. 2 cm in size. Start by adding the first the
tomatoes and then the cucumber to the blender. Liquidise them at level 3. Add
the remaining ingredients and then liquidise/blend them all together at level 3
until a smooth soup is created. Serve the soup with bread.
NOTE
These recipes are provided subject to change. All ingredients and
preparation information are guiding values. Adapt these recipe suggestions
based on your personal experience.
NOTE
In cases of lactose intolerance, we recommend you use a lactose-free milk.
Keep in mind, however, that lactose-free milk is a little sweeter.
Cleaning
DANGER! ELECTRIC SHOCK!
Before starting to clean the blender and its components:
Ensure that the motor is switched off and the power plug removed from the
socket.
Do not immerse the motor block 6 in water or other liquids. This could
result in you receiving a fatal electric shock and cause damage to the
appliance.
Never open the housing of the appliance. Otherwise, there is a risk of a
fatal electric shock.
WARNING! RISK OF INJURY!
Handle the cutting blades 4 with extreme caution. They are extremely
sharp!
CAUTION! PROPERTY DAMAGE!
Do not use solvents or abrasive cleaners on the plastic surfaces, they could
be damaged by them.
GBIE 13 SSMC 600 B1
Cleaning the blender
To prevent injuring yourself on the cutting blades 4, clean the blender 3 only
with a long-handled washing-up brush.
Clean the measuring cap 1 and the lid 2 in a mild soap solution. You can
remove the rubber seal 9 to clean the blender lid by hand. Make sure that
the rubber seal 9 is correctly reattached before you use the lid 2 again
(Fig. 3).
Fig. 3
NOTE
You can also clean the lid 2 together with the rubber seal 9, the
measuring cap 1 and the blender attachment 3 in the dishwasher
along with the cutting blades 4. We recommend not removing the
rubber seal 9 when cleaning in the dishwasher, as it might otherwise deform.
If possible, place the plastic parts in the upper basket of the dishwasher and
make sure that they are not jammed. Otherwise, they could become
misshapen or suffer from stress cracks.
If you clean the blender directly after use, you can often achieve a
satisfactory and hygienic level of cleaning by doing the following:
Fill the blender attachment 3 with 750 ml of water and add a drop of
washing up liquid. Close the lid 2 and fit the blender attachment 3 onto
the motor unit 6. Insert the mains plug into the socket and activate the pulse
function a few times so that the cutting blades 4 plough through the water
at maximum speed. Afterwards, rinse the blender attachment 3 with plenty
of clean water to remove any washing up liquid residues.
Dry all parts thoroughly before reusing or storing them.
14 GBIE SSMC 600 B1
If this does not remove the dirt, you can remove the lower plastic part of the
blender attachment 3 with the cutting blades 4 from the glass part of the
blender 3:
A
C
B
Fig. 4
A Glass part
B Sealing ring
C Plastic part with blades
1) Remove the blender 3 from the motor unit 6. For better stability, remove
the lid 2 by turning it anticlockwise towards position (see Fig 1) until
you can pull it off upwards.
2) Turn the appliance upside down and turn the plastic part C of the
blender3 anticlockwise so that it can be detached from the glass part A
of the blender attachment 3 (see fig. 4).
3) Clean both parts in a mild soap solution or in the dishwasher.
4) You can carefully remove the sealing ring B from the plastic part C if
necessary. Clean in mild soapy water and rinse with clear water.
5) Dry all parts thoroughly before reassembling them.
6) If necessary, reinsert the sealing ring B into the plastic part C correctly.
Then place the plastic part C of the blender 3 back on the glass part A
of the blender 3 and turn the plastic part C clockwise.
GBIE 15 SSMC 600 B1
Cleaning the motor block
If necessary, clean the motor unit 6 and its mains cable with a damp cloth.
For stubborn stains, apply a mild detergent to the cloth and wipe off with a
cloth moistened only with water. Dry everything well afterwards.
When cleaning, always check that the contact switch in the fitting for the
blender 3 is not blocked by soiling residues. If you cannot dislodge any
blockages with the corner of a piece of paper, make contact with Customer
Services. Do not use any hard objects, these could damage the contact
switch.
Storage
1) If you do not intend to use the blender for an extended period, clean it
thoroughly (see chapter “Cleaning”).
2) Wrap the power cable around the cable retainer 7 on the base of the
motor block 6.
3) Store the blender in a cool and dry location.
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites.
The packaging is made from environmentally friendly material and can be
disposed of at your local recycling plant.
16 GBIE SSMC 600 B1
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a
safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you or
refund the purchase price (at our discretion). This warranty service requires that
you present the defective appliance and the proof of purchase (receipt) within
the three-year warranty period, along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or
replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and
defects present at the time of purchase must be reported immediately after
unpacking. Repairs carried out after expiry of the warranty period shall be
subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality
guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications / repairs which have not been carried out by one of
our authorised Service centres.
GBIE 17 SSMC 600 B1
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (e.g.IAN123456_7890)
available as proof of purchase.
You will find the item number on the type plate on the product, an engraving
on the product, on the front page of the operating instructions (below left) or
on the sticker on the rear or bottom of the product.
If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product
videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating instructions
by entering the item number (IAN) 360503_2010.
Service
Service Great Britain
Tel.: 0800 404 7657
Service Ireland
Tel.: 1890 930 034
(0,08EUR / Min.,(peak))
(0,06EUR / Min.,(off peak))
IAN 360503_2010
Importer
Please note that the following address is not the service address. Please use the
service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170

Silvercrest SSMC 600 B1 Manuel utilisateur

Catégorie
Mélangeurs
Taper
Manuel utilisateur