Winmate GC Series Manuel utilisateur

Catégorie
Téléviseurs
Taper
Manuel utilisateur

Ce manuel convient également à

Please read these instructions carefully before using this product, and save this manual for future use.
19”/ 21.5”/ 23.8” G-WIN Display
GC Series
User Manual
Document Version 1.0
Document Part No. 91521110105D
2
19"~23.8" G-WIN GC Series Display Quick Start Guide
Contents
Preface 3
Chapter 1: Introduction 7
1.1 Features 7
1.2 Package Content 7
1.3 Product Overview 8
1.4 Physical Buttons and LED Indicators 9
Chapter 2: Getting Started 11
2.1 Turning On and Off Your Device 11
2.2 OSD Menu Navigation 12
Chapter 3: Installation 13
3.1 Wiring Requirements 13
3.2 Connecting to Other Devices 13
Chapter 4: Mounting 15
4.1 VESA Mount 15
4.2 Panel Mount 16
Chapter 5: Troubleshooting 17
Appendix 18
Appendix A: Display Specifications 18
Appendix B: Cleaning the Monitor 19
Appendix C: Frequency Table 19
3
Preface
Preface
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
We reserve the right to make changes, without notice, to any product, including circuits and/or
software described or contained in this manual in order to improve design and/or performance.
We assume no responsibility or liability for the use of the described product(s) conveys no
license or title under any patent, copyright, or masks work rights to these products, and make
no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described in this
manual are for illustration purposes only. We make no representation or guarantee that such
application will be suitable for the specified use without further testing or modification.
Warranty
Our warranty guarantees that each of its products will be free from material and workmanship
defects for a period of one year from the invoice date. If the customer discovers a defect, we
will, at his/her option, repair or replace the defective product at no charge to the customer,
provide it is returned during the warranty period of one year, with transportation charges
prepaid. The returned product must be properly packaged in its original packaging to obtain
warranty service. If the serial number and the product shipping data differ by over 30 days, the
in-warranty service will be made according to the shipping date. In the serial numbers the third
and fourth two digits give the year of manufacture, and the fifth digit means the month (e. g.,
with A for October, B for November and C for December).
For example, the serial number 1W18Axxxxxxxx means October of year 2018.
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website of
our distributor to find the update information about the product. Second, contact with your
distributor, sales representative, or our customer service center for technical support if you
need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We are
always ready to give advice on application requirements or specific information on the
installation and operation of any of our products.
4
19"~23.8" G-WIN GC Series Display Quick Start Guide
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information or to
alert you to the potential for hardware damage or personal injury. These are Notes, Important,
Cautions, and Warnings. The following is an example of each type of advisory.
Note:
A note is used to emphasize helpful information
Important:
An important note indicates information that is important for you to know.
Caution A Caution alert indicates potential damage to hardware and explains how
to avoid the potential problem.
Attention Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
Warning! An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Avertissement !Un Avertissement de Choc Électrique indique le potentiel de
chocs sur des emplacements électriques et comment éviter ces problèmes.
Safety Information
Warning! Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the power is
on. Sensitive electronic components can be damaged by sudden power surges. Only
experienced electronics personnel should open the PC chassis.
Avertissement! Toujours débrancher le cordon d’alimentation du chassis lorsque
vous travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation
est présente. Des composantes électroniques sensibles peuvent être endommagées
par des sauts d’alimentation. Seulement du personnel expérimenté devrait ouvrir ces
chassis.
Caution Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric charges. As
a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are not in
the chassis.
Attention Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques moderns
sont très sensibles aux décharges d’électricité statique. Toujours utiliser un bracelet
de mise à la terre comme précaution. Placer toutes les composantes électroniques
sur une surface conçue pour dissiper les charge, ou dans un sac anti-statique
lorsqu’elles ne sont pas dans le chassis.
5
Preface
For your safety carefully read all the safety instructions before using the device. Keep this user
manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the equipment and must
be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or letting it fall
could cause damage.
The openings on the enclosure are for air convection and to protect the equipment from
overheating.
Do not cover the openings.
Before connecting the equipment to the power outlet make sure the voltage of the power
source is correct.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
If the equipment is not used for a long time, disconnect it from the power source to avoid
damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical shock.
Never open the equipment. For safety reasons, only qualified service personnel should
open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following
problems appear:
o The power cord or plug is damaged.
o Liquid has penetrated into the equipment.
o The equipment has been exposed to moisture.
o The equipment does not work well or you cannot get it to work according to
the user manual.
o The equipment has been dropped and damaged.
o The equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.
Caution Use the recommended mounting apparatus to avoid risk of injury.
Attention Utiliser l’appareil de fixation recommandé pour éliminer le risque
de blessure.
Warning! Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
Avertissement! Utiliser seulement les cordons d’alimentation fournis
avec le produit. Si vous doutez de leur provenance, contactez le
manufacturier.
Warning! Always ground yourself against electrostatic damage to the device.
Avertissement! Toujours vérifier votre mise à la terre afin que
l’équipement ne se décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap connected
to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before connecting test equipment.
6
19"~23.8" G-WIN GC Series Display Quick Start Guide
Keep the work area free of non-conductive materials, such as ordinary plastic
assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers that are conductive.
Always put drivers and PCB’s component side on anti-static foam.
Important Information
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at him own expense.
EC Declaration of Conformity
This equipment is in conformity with the requirement of the
following EU legislations and harmonized standards. Product also
complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010 EN 55022: 2010 Class B
o IEC61000-4-2: 2009
o IEC61000-4-3: 2006+A1: 2007+A2: 2010
o IEC61000-4-4: 2012
o IEC61000-4-5: 2014
o IEC61000-4-6: 2013
o IEC61000-4-8: 2010
o IEC61000-4-11: 2004
EN55022: 2010/AC:2011
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:2013
About This User Manual
This User Manual provides information about using the Winmate® G-WIN GC Series Panel
PC. This User Manual applies to the G-WIN GC Series Display.
Note:
Some pictures in this guide are samples and can differ from actual product.
7
Chapter 1: Introduction
Chapter 1: Introduction
Congratulations on purchasing Winmate® G-WIN GC Series Display. The elegantly designed,
yet rugged, industrial grade G-WIN GC Series is designed heavy duty applications.
With rugged construction, ultimate computing power, G-WIN GC Series guaranteed to meet
"heavy duty" needs. This series feature high computing power and user-friendly interface with
projected capacitive multi-touch (PCAP) technology and support Android, Linux Kernel and
Ubuntu operating systems. Rugged housing provides front IP65 protection against outer dust and
water splash.
1.1 Features
Winmate® G-WIN GC Series Display features:
19”/ 21.5”/ 23.8” LCD with PCAP touchscreen
Front IP65 for protection against water and dust
A true flat, easy-to-clean front surface with edge-to-edge design
VGA input and variety of optional connectors
USB port for touch
Stylish and elegant design
1.2 Package Content
Carefully remove the box and unpack your device. Please check if all the items listed below are
inside your package. If any of these items are missing or damaged contact us immediately.
Standard factory shipment list:
Display
User Manual
(Hardcopy)
AC Adapter
(12V/ 50W)
USB Cable for
Touch (Optional)
Varies by product
specifications
Part No. 91521110101B
Part No. 922D050W12VA
Part No. 948018102100
Power Cable
VGA Cable
HDMI Cable
Part No. Varies by country
Part No. 9441151150P3
Part No. 94E0190190P3
8
19"~23.8" G-WIN GC Series Display Quick Start Guide
1.3 Product Overview
19”, R19L100-GCM1
Unit: mm
21.5”, W22L100-GCA3
Unit: mm
Description
Description
12V DC in
Touch (USB)
HDMI
2 Watt Speaker
VGA
OSD Control Panel
Description
Description
12V DC in
Touch (USB)
HDMI
2 Watt Speaker
VGA
OSD Control Panel
9
Chapter 1: Introduction
23.8”, W24L100-GGCA2
Unit: mm
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators (OSD Control Panel) located on the rear side of the
Display.
Description
Description
12V DC in
Touch (USB)
HDMI
2 Watt Speaker
VGA
OSD Control Panel
10
19"~23.8" G-WIN GC Series Display Quick Start Guide
Physical Buttons
Icon
Button
Description
DOWN/ VOLUME
DOWN
Press to lower down the volume.
UP/ VOLUME UP
Press to increase the volume.
ESC/ AUTO
Press to exit the menu.
OK/ MENU
Press to confirm the action or to come back
to the main menu.
Power On/ Off
Press to power on or power off the device.
Brightness
Press to adjust brightness.
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity
(Data is being read or written)
Off
System is idle
11
Chapter 2: Getting Started
Chapter 2: Getting Started
2.1 Turning On and Off Your Device
Follow the following steps to turn on your device:
1. Connect the Display to the AC adapter.
2. Connect the AC adapter to the power cord.
3. Plug in the power cord to a working AC wall outlet. Press power button on the OSD control
panel.
CAUTION
Use only the AC adapter (12V/ 50W) included in your package
(Rating: Output 4.2 A). Using other AC adapters may damage the device.
To turn off the device:
1. Press the power button located on the OSD control panel.
2. Disconnect the power cord from the display to completely power off the device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded AC outlet. Install the
additional PE ground wire if the local installation regulations require it.
12
19"~23.8" G-WIN GC Series Display Quick Start Guide
2.2 OSD Menu Navigation
Icon
Menu
Description
BRICONTRAST
BRIGHTNESS
CONTRAST
POSITION
Only support VGA mode
H position
V position
IMAGE
Only support VGA mode
Auto Adjustment
Clock
Phase
White Balance
COLOR
USER
9300K
6500K
ADC RIGHTNESS
GAMMA
GAMMA0
GAMMA1
GAMMA2
OP
OPTION
VR Brightness
Volume
Speaker
CHANNEL
AUTO Scan
ANALOG
HDMI
RECALL
YES
NO
OSD EXIT
YES
NO
13
Chapter 3: Installation
Chapter 3: Installation
3.1 Wiring Requirements
The following common safety precautions should be observed before installing any electronic
device:
Strive to use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must cross make sure the wires are
perpendicular at the intersection point.
Keep the wires separated according to interface. The rule of thumb is that wiring that
shares similar electrical characteristics may be bundled together.
Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the system.
Do not run signal or communication wiring and power wiring in the same conduit. To
avoid interference, wires with different signal characteristics (i.e., different interfaces)
should be routed separately.
Be sure to disconnect the power cord before installing and/or wiring your device.
Verify the maximum possible current for each wire gauge, especially for the power
cords. Observe all electrical codes dictating the maximum current allowable for each
wire gauge.
If the current goes above the maximum ratings, the wiring could overheat, causing
serious damage to your equipment.
Be careful when handling the unit. When the unit is plugged in, the internal
components generate a lot of heat which may leave the outer casing too hot to touch.
3.2 Connecting to Other Devices
This section explains how to connect external interfaces to the Display.
3.2.1 Power Connector
Display has DC power source input is 2.5mm power jack connector.
Pin №
Signal Name
1
+12V
2
GND
3
GND
14
19"~23.8" G-WIN GC Series Display Quick Start Guide
3.2.2 HDMI Connector
GC Series Display has HDMI 1.4a connector.
3.2.3 VGA Connector
GC65 Display has standard 15pin D-sub connector.
Pin №
Signal Name
1
HDMI_RX2+
2
GND
3
HDMI_RX2-
4
HDMI_RX1+
5
GND
6
HDMI_RX1-
7
HDMI_RX0+
8
GND
9
HDMI_RX0-
10
HDMI_RXC+
11
GND
12
HDMI_RXC-
13
HDMI_CON_CEC
14
NC
15
HDMI_CON_SCL
16
HDMI_CON_SDA
17
HDMI_CON_CABLE
18
+5V_HDMI
19
HDMI_CON_HP
Pin №
Signal Name
Pin №
Signal Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_DE
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
15
Chapter 4: Mounting
Chapter 4: Mounting
GC Series Display comes with different mounting options suitable for most of the industrial and
commercial applications.
4.1 VESA Mount
This device supports VESA Mounting and provides various types of mounting options to fit any
industrial use or vehicle.
Size
VESA Plate
VESA Screw
19”
100x100 mm
M4
21.5”
100x100 mm
M4
23.8”
100x100 mm
M4
Mounting Instruction
1. Use Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device.
*The picture is for demonstration purposes only. VESA Mount accessories are not supplied by
Winmate.
16
19"~23.8" G-WIN GC Series Display Quick Start Guide
4.2 Panel Mount
Panel Mount mounting solutions is suitable for many applications where Display should be
embedded. With this mounting solution flat surface leave no bezel in the front.
Size
Wall Cutout
Screw Hole Diameter
19”
403 x 313 mm
M4 3.98 x 3.84
21.5”
498 x 285 mm
M4 3.98 x 3.84
23.8”
498 x 285 mm
M4 3.98 x 3.84
Mounting Instruction
1. Prepare a fixture for the specific dimensions of the device.
2. Cut a hole on a sub frame or panel according to the cutout dimensions.
3. Install the device properly onto the cutout area of the sub frame or panel with the sides of
the front bezel.
4. Fix the device to fixture with Phillips screws.
17
Chapter 5: Troubleshooting
Chapter 5: Troubleshooting
If your monitor fails to operate correctly, check the following chart for possible solution before
calling for repairs:
Problem
Solution
The picture does not
appear
Check if the signal cable is firmly seated in the socket.
Check if the Power is ON at the computer
Check if the brightness control is at the appropriate position,
not at the minimum.
The screen is not
synchronized
Check if the signal cable is firmly seated in the socket.
Check if the output level matches the input level of your
computer.
Make sure the signal timings of the computer system are
within the specification of the monitor.
If your computer was working with a CRT monitor, you
should check the current signal timing and turn off your
computer before you connect the VGA Cable to this
monitor.
The position of the
screen is not in the
center
Adjust the H-position, and V-position, or Perform the Auto
adjustment.
The screen is too bright
(too dark)
Check if the brightness or contrast control is at the
appropriate position, not at the Maximum (Minimum).
The screen is shaking
or waving
Perform the Auto adjustment.
Moving all objects which emit a magnetic field such as
motor or transformer, away from the monitor.
Check if the specific voltage is applied.
Check if the signal timing of the computer system is within
the specification of monitor.
VGA signal got noise
when using PIP
function
Change PIP mode again.
*If you are unable to correct the fault by using this chart, stop using your monitor and contact
your distributor or dealer for further assistance.
18
19"~23.8" G-WIN GC Series Display Quick Start Guide
Appendix
Appendix A: Display Specifications
Model Name
R19L100-GCM1
W22L100-GCA3
W24L100-GGCA2
Display
Size/Type
19" TFT
21.5” TFT
23.8” TFT
Resolution
1280x1024
1920x1080
1920x1080
Brightness
250cd/m2 (typ.)
250cd/m2 (typ.)
250cd/m2 (typ.)
Contrast Ratio
1000 : 1 (typ.)
3000 : 1 (typ.)
3000 : 1 (typ.)
Viewing Angle
-85~85(H);-80~80(V)
-89~89(H);-89~89(V)
-89~89(H);-
89~89(V)
Max Colors
16.7M
16.7M
16.7M
Touch
PCAP touch
PCAP touch
PCAP touch
Interfaces
VGA
1 x VGA
1 x VGA
1 x VGA
HDMI
1 x HDMI 1.4a
1 x HDMI 1.4a
1 x HDMI 1.4a
User Controls
OSD Panel
5 keys (+, -, Power,
Esc, Enter)
5 keys (+, -, Power,
Esc, Enter)
5 keys (+, -, Power,
Esc, Enter)
Power
Specifications
Power Input
12V DC 2.5mm, with
External AC to DC
Adapter
comply with Level V1
efficiency standard
12V DC 2.5mm, with
External AC to DC
Adapter
comply with Level V1
efficiency standard
12V DC 2.5mm,
with External AC to
DC Adapter
comply with Level
V1 efficiency
standard
Power Consumption
15W typical, normal
operation
20W typical, normal
operation
25W typical, normal
operation
Mechanical
Specifications
Dimensions
444 x 368 x 51 mm
529 x 320.4 x 51 mm
587 x 356 x 55 mm
Mounting
Panel Mount, VESA
Mount
Panel Mount, VESA
Mount
Panel Mount, VESA
Mount
Cutout Dimensions
Environment
Considerations
Operating Temp.
0 °C to 50 °C
0 °C to 50 °C
0 °C to 50 °C
Operating Humidity
10% to 95% (non-
condensing)
10% to 95% (non-
condensing)
10% to 95% (non-
condensing)
IP Rating
Front IP65
Front IP65
Front IP65
Standards and
Certification
Safety
CE, FCC
CE, FCC
CE, FCC
19
Appendix
Appendix B: Cleaning the Monitor
Before cleaning:
Make sure the device is turned off.
Disconnect the power cable from any AC outlet.
When cleaning:
Never spray or pour any liquid directly on the screen or case.
Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
The display area is highly prone to scratching. Do not use ketene type material (ex.
Acetone), Ethyl alcohol, toluene, ethyl acid or Methyl chloride to clear the panel. It may
permanently damage the panel and void the warranty.
If it is still not clean enough, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
Don not use water or oil directly on the display screen. If droplets are allowed to drop on
the screen, permanent staining or discoloration may occur.
Appendix C: Frequency Table
The choice of supported modes depends on the monitor native resolution.
HDMI 1.4
VGA
Resolution
Frequency (Hz)
Resolution
Frequency (Hz)
1
1280x1024
60
1
1280x1024
60
2
1366x768
60
2
1280x1024
75
3
1600x1200
60
3
1366x768
60
4
1680x1050
60
4
1600x1200
60
5
1920x1080
60
5
1680x1050
60
6
1920x1200
60
6
1920x1200
60
7
1920x1080
60
For information about available input signals, please refer to R-Series AD Board Manual included
in the package or visit Winmate Download Center at
http://www.winmate.com/DownCenter/DownLoadCenterIndex.asp
Winmate Inc.
9F, No.111-6, Shing-De Rd., San-Chung District,
New Taipei City 24158, Taiwan, R.O.C
www.winmate.com
Copyright © Winmate Inc. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Winmate GC Series Manuel utilisateur

Catégorie
Téléviseurs
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues