A982 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 6

STEP 1 Install the Seat Frame .............................................................. 6

STEP 2 Install the Weight Plate Pegs .................................................. 8

STEP 3 Level the Unit ........................................................................... 10

5. OPERATE THE PRODUCT ............................................................... 11

MAINTENANCE One-Year Maintenance Log ....................................... 15

7. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 16

2

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the A982 leg

press machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

3

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assem-

bled, and all fasteners are tightened. Do not use the product if it is disas-

sembled in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop imme-

diately if an object becomes caught or impedes normal motion.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowlege or experience. If such people use

this product, they should be given training and be supervised at all times

by someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or

near the product.

• The user weight limit for this product is 227 kg, 500 lb.

4

3. LIST OF PARTS

No. Name Qty. No. Name Qty.

A1 Main frame 1 A3 Weight plate peg(long) 2

A2 Seat frame 1 A4 Weight plate peg 6

5

Components on the Product

No. Name Specication Notes

20

Hex head screw M10*P1.5*L130

Spring washer M10

Washer D16*d10.2*t1.0

Nylon hex lock nut M10

Components in the Hardware Kit

No. Name Qty. Specication Notes

Double open-end wrench 2 13*17

6

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” is

7

(b) Attach the seat frame (A2) to the main frame (A1) and then secure the

assembly with the screws (20).

8

Please follow instructions (a) through (c) to install the weight plate pegs.

(a) First remove the screws (22) from the weight plate pegs (A4) and then

loosen the screws (21) from the main frame (A1).

(b) Install the weight plate pegs (A3) (A4) onto the sides of the main frame

(A1). Use the screws (22) to secure the weight plate pegs from the back

and secure the whole assembly with screws.

9

(c) Install the weight plate pegs (A4) onto the sides of the main frame (A1).

Use the screws (22) to secure the weight plate pegs from the back and

secure the whole assembly with screws.

16

17