Archos VM9511TS Manuel utilisateur

VM9511TS

Instruction Manual

Manual de Instrucciones

Guide d'instructions

i

CONTENTS

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s

manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to

use all the features of your new Jensen VM9511TS Mobile Multimedia AM/FM/DVD Receiver

for maximum enjoyment.

Preparation............................................................................................................................ 1

Installation............................................................................................................................. 5

Controls and Indicators......................................................................................................... 6

Front Zone Remote Control .................................................................................................. 9

Multi-ZONE Remote Control ............................................................................................... 12

Using the TFT Monitor ........................................................................................................ 13

Operating Instructions......................................................................................................... 15

System Setup Menu............................................................................................................ 16

Multi-ZONE Operation......................................................................................................... 18

Tuner Operation.................................................................................................................. 19

XM Radio Operation............................................................................................................ 20

DVD/VCD Video Operation................................................................................................. 22

DVD/Disc Setup Menu........................................................................................................ 25

DVD/Disc Audio Operation.................................................................................................. 28

SD Card Reader Operation................................................................................................. 30

iPod Operation.................................................................................................................... 31

TV Tuner Operation ............................................................................................................ 32

Navigation System.............................................................................................................. 33

Troubleshooting .................................................................................................................. 34

Specifications...................................................................................................................... 37

12-month Limited Warranty .................................................................................................37

CONTENIDO

Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual

instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá

cómo utilizar todas las funciones de su nuevo radio Jensen para su máximo entretenimiento.

Preparación......................................................................................................................... 39

Instalación........................................................................................................................... 43

Controles e Indicadores...................................................................................................... 44

Control Remoto de Zona Delantera .................................................................................... 47

Control Remoto de Multi-ZONE .......................................................................................... 50

Utilización del Monitor TFT ................................................................................................. 51

Instrucciones de Operación ................................................................................................ 53

Menú de Configuración de Sistema.................................................................................... 55

Operación Multi-ZONE........................................................................................................ 57

Operación del Radio ........................................................................................................... 58

Operación de Radio XM

®

.................................................................................................... 59

Operación del Video de DVD/VCD ..................................................................................... 61

Menú Configuración del DVD/Disc...................................................................................... 64

Operación del Audio de DVD/Disco.................................................................................... 67

Operación del Lector de Tarjeta SD.................................................................................... 69

Operación de iPod .............................................................................................................. 70

Operación del Sintonizador de TV ...................................................................................... 71

Sistema de Navegación ...................................................................................................... 72

Solución de Problemas ....................................................................................................... 73

Especificaciones ................................................................................................................. 76

Garantia Limitade de 12 Meses .......................................................................................... 76

TABLE DES MATIÈRES

Merci d'avoir choisi un produit Jensen . Nous espérons que vous allez trouver les instructions

dans ce guide de propriétaire claires et faciles à suivre . Prenez quelques minutes à le

consulter, vous apprendrez à utiliser toutes les fonctions de votre nouvelle radio Jensen pour

en tirer une jouissance maximum.

Preparation......................................................................................................................... 77

Installation.......................................................................................................................... 81

Controles et indicateurs...................................................................................................... 82

Telecomande de la zone d'avant ....................................................................................... 85

Telecommande Multi-ZONE............................................................................................... 88

Utilisation du moniteur TFT................................................................................................ 89

Instructions d'operation...................................................................................................... 91

Menu configuration du systeme ......................................................................................... 93

Operation Multi-ZONE........................................................................................................ 95

Operation tuner AM/FM...................................................................................................... 96

Operation radio XM............................................................................................................ 97

Operation platine DVD ....................................................................................................... 99

Menu de configuration DVD/disque.................................................................................. 102

Operation audio DVD/DisQUE......................................................................................... 105

Operation lecteur carte SD............................................................................................... 107

Operation iPod ................................................................................................................. 108

Operation tuner TV........................................................................................................... 109

Systeme de navigation..................................................................................................... 110

Depannage....................................................................................................................... 111

Specifications................................................................................................................... 114

Garantie limitée de 12 mois .............................................................................................. 114

ii

1

VM9511TS

PREPARATION

Congratulations on your purchase of the Jensen VM9511TS

Mobile Multimedia AM/FM/DVD Receiver.

It’s a good idea to read all of the instructions before beginning

the installation. We recommend having your Jensen

VM9511TS installed by a reputable installation shop.

Features

DVD

• Compatible formats: DVD-R, DVD-RW, DVD+R,

DVD+RW, CD-R, CD-RW, CD-DA, MP3, WMA, SVCD,

VCD, MPEG2, MPEG4, AVI and JPEG

• Region 1 playback

• 16:9 Aspect ratio- Wide / Normal / Cinema

• Front panel DVD control

• High-speed Fast Forward / Fast Rewind 2X, 4X, 8X, 32X

• Play, Pause, Stop, Slow

• Chapter Up / Down

• V-SEL - MultiZone output 'Kid-Zone'

• Wolfson Microelectronics high performance 24-bit, 192

kHz DAC supports 6-channel and 2-channel "Down-Mix”

audio modes

• 16MB high-speed flash memory - 80nS access time

• 2 second ESP (Electronic Skip Protection)

Integrated SD Card Reader

• Compatible formats: MP3, WMA, AVI, MPEG1, MPEG2,

MPEG4 and JPEG

• Supports up to 2GB SD card

MP3/WMA

• GIGA MP3 - Store up to 999 MP3 files on a DVD

• ID3-tag compatible

• Direct track access

• Play, Pause, Stop, Track Up / Down

• 60 second (MP3), 120 second (WMA) ESP - Electronic

Skip Protection

CD

• CD-text compatible

• 4 second ESP (Electronic Skip Protection)

AM/FM Tuner

• User-selectable frequency spacing

• 30 Station presets (18FM/12AM) JENSEN Plus Tuner II

Outboard Media Module

• Input adapter for TV Tuner, XM and iPod

TV Tuner (Included)

• VHF 2-13

• UHF 14-69

• TV antenna (3.5mm antenna included)

• F-Connector/Coaxial Antenna Input (optional)

XM Ready

• Requires optional Terk XMD1000 tuner box

• Requires optional Terk XMDJEN100 or Jensen JXMC XM

cables

• Advanced display shows the artist, song title, and XM

channel and category at a glance

• Direct channel entry

Navigation Ready

• Requires optional NAV100 navigation module

jLink Ready

• Controls and charges all iPod's except "Shuffle"

• Displays all text information including category, track

name, artist and channel number

Chassis

• 7-inch TFT touch screen LCD - 336,960 pixels (1440W X

234H)

• TSD - Touch Screen Display menu control

• Fully automatic motorized TFT LCD flip-out and up

• 16-step TFT LCD tilt adjustment

• Beep Tone confirmation

• 1.0 Din

• Import/ISO/DIN mountable

• Heat management system - Incorporates forced air-

cooling to keep the chip-sets operating at nominal

temperatures

• Heavy duty galvanized chassis

Multi-ZONE

• Allows front passengers to listen to the radio while rear

passengers listen to a CD, MP3, WMA or watch DVDs

General

• Full function infrared remote control

• Limited function infrared "Kid Zone" remote

• OSD - On Screen Display menu control

• High-performance audio processor

• Electronic volume, bass, treble, balance and fader

• Bass center frequency adjustment - 60, 80, 100, 130,

150 and 200Hz

• Bass Q factor - 1.0, 1.25, 1.5 and 2.0

• Treble center frequency adjustment - 10, 12.5, 15 and

17kHz

• Subwoofer crossover - 80, 120 and 160Hz

• Subwoofer Phase - 0 - 180 degrees

• Subwoofer level - variable

• 100-ohm low impedance pre-amp outputs, all channels

• 5V Peak / 2V RMS RCA outputs, all channels

• 1-pair front RCA outputs and 1-pair rear/surround RCA

outputs

• Single Subwoofer RCA output

• Center Channel RCA pre-amp output (variable)

• 1-pair headphone/Multi-ZONE RCA outputs

• 1-pair auxiliary RCA A/V inputs

• Back-up camera input with reverse override

• 1 NTSC composite video output for additional screens

• NTSC Multi-ZONE composite video for additional screens

• Front panel (when screen is closed) high contrast LCD

• Rotary encoder audio control

• Joystick menu navigation

Tools and Supplies

You will need these tools and supplies to install your

VM9511TS:

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket

wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING! Only connect the unit to a12-volt power

supply with proper grounding.

WARNING! Never install this unit where operation and

viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident

(except when using for rear-view video camera) never

use the video display function while driving the vehicle.

This is a violation of federal law.

WARNING! Never disassemble or adjust the unit without

the assistance of a professional. For details, please

consult your local car stereo specialty shop.

WARNING! To prevent injury from shock or fire, never

expose this unit to moisture or water.

2

VM9511TS

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside

this unit, avoid impact to the TFT monitor.

WARNING! Do not change the fuse on the power wire

without professional guidance. Using an improper fuse

may cause damage to the unit and result in a fire.

WARNING! The monitor employs an automatic motorized

mechanism. To prevent damage to the core mechanism,

please do not push, pull or swivel the monitor manually.

Optional Accessories

iAUX

3

READY (Sold Separately)

• Can connect to any portable media device or multimedia

device using a standard 3.5mm plug

• Converts 3.5mm auxiliary input to RCA stereo outputs

for easy connection to the radio’s AUX inputs

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and

remove the negative (-) battery cable prior to installation.

NOTE: If the VM9511TS is to be installed in a vehicle

equipped with an on-board drive or navigation computer,

DO NOT disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under

these conditions, use extra caution during installation to

avoid causing a short circuit.

3

VM9511TS

WIRING DIAGRAM

4

VM9511TS

WIRING DIAGRAM - MULTIMEDIA CONNECTIONS

*TERK XMDJEN100 cables (sold

separately)

**TERK XMD1000 Direct Tuner and

antenna (sold separately)

***NAV100 (sold separately)

5

VM9511TS

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the half-

sleeve from the radio.

2. Remove the transport screws.

3. Install the half-sleeve.

a. Install adapter if necessary (optional).

b. Install half-sleeve into adapter or dashboard (use only

the supplied screws). Do not force the sleeve into the

opening or cause it to bend or bow.

c. Locate the series of bend-tabs along the top, bottom

and sides of the mounting sleeve. With the sleeve fully

inserted into the dashboard opening, bend as many of

the tabs outward as necessary so that the sleeve is

firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

CAUTION! Be careful not to damage the car wiring.

4. Place the radio in front of the dashboard opening so the

wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the

ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct

type and amperage to avoid damaging the radio. The

VM9511TS uses one 15 amp mini-ATM fuse, located in

the black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to

confirm operation (ignition switch must be on). If unit does not

operate, recheck all wiring until problem is corrected. Once

proper operation is achieved, turn off the ignition switch and

proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve, making

sure it is right-side-up, until it is fully seated and the

spring clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the

chassis must be mounted within 20° of horizontal. Make

sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap

(supplied) to the screw stud on the rear of the chassis

using the hex nut provided. Fasten the other end of the

perforated strap to a secure part of the dashboard either

above or below the radio using the screw and hex nut

provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with

the strap to prevent damage to the dashboard from the

weight of the radio or improper operation due to

vibration.

5. Replace any items you removed from the dashboard.

Final ISO-DIN Installation

1. Remove trim ring.

2. Mount factory brackets on new radio using existing

screws from old radio.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

Using the iAUX

3

External AV Connector

The iAUX

3

(sold separately) allows you to connect a variety

of external devices, including a VCR, DVD player, portable

MP3 player, etc., to your VM9511TS without removing the

radio.

To install the iAUX

3

, connect it to the AUX-IN cables on the

back of the VM9511TS (see the Wiring Diagram on page 3),

and then install the iAUX

3

in a location convenient for

plugging in auxiliary devices.

PREPARE RADIO

3d

3a

3b

3c

INSTALL HALF SLEEVE

FINAL INSTALLATION

FINAL ISO-DIN INSTALLATION

6

VM9511TS

CONTROLS AND INDICATORS

Button Operation

1. OPEN

Press to activate the automatic mechanical system and move

the TFT monitor into viewing position. Press again to close

the TFT.

2. WIDE/ PICTURE

Press to adjust the display aspect of the picture to one of

three settings: Cinema, Full, Normal or OFF. Press and hold

to access picture settings.

3. ( )

Press to adjust the upward tilt angle of the screen one step at

a time. Press and hold this button to continuously adjust the

upward tilt or picture settings.

4. ( )

Press to adjust the downward tilt angle of the screen one step

at a time. Press and hold this button to continuously adjust

the downward tilt or picture settings.

5. DISP

Press to display system information on the screen.

6. VOL/LO/DX

Rotate to adjust the volume. Press and release to enter and/

or confirm audio settings. Press and hold to activate the Local

(LOC) setting.

7. POWER/MUTE

Press once to turn the unit on. Press again to mute the

volume. Press and hold to turn the unit off.

8. 1/AUDIO

DVD Mode: Press to select audio language during playback.

TUNER Mode: Press once to play preset radio station

channel 1. Press and hold to store the current radio station in

preset channel 1.

9. 2/SUBTITLE

DVD Mode: Press once to select the subtitle language during

playback.

TUNER Mode: Press once to play preset radio station

channel 2. Press and hold to store the current radio station in

preset channel 2.

7

VM9511TS

CONTROLS AND INDICATORS

10. 3/SCN

DVD Mode: Press once to start scan playback.

TUNER Mode: Press once to play preset radio station

channel 3. Press and hold to store the current radio station in

preset channel 3.

11. 4/RPT

DVD Mode: Press once to start repeat playback.

TUNER Mode: Press once to play preset radio station

channel 4. Press and hold to store the current radio station in

preset channel 4.

12. 5/2-6CH/RDM

DVD Mode: Press once for random playback.

TUNER Mode: Press once to play preset radio station

channel 5. Press and hold to store the current radio station in

preset channel 5.

CD Mode: Press and hold to switch between 2 channel & 6

channel audio output.

13. 6/STOP

DVD Mode: Press once to stop playback.

TUNER Mode: Press once to play the preset radio station

channel 6. Press and hold to store the current radio station in

preset channel 6.

14. BAND

TUNER Mode: Press to switch between FM and AM.

15. SRC

Press once to select playing mode.

Press and hold to toggle rear zone mode On/0ff.

16. ( )

DVD Mode: Press once to play back the previous chapter/

track.

TUNER Mode: Press once to auto-search for the previous

available radio station.

MENU Mode: Press once to move the cursor to the left.

17. ( )

DVD Mode: Press once to enter the next chapter or track.

TUNER Mode: Press once to auto-search the next available

radio station.

MENU Mode: Press once to move the cursor to the right.

18. ( )

DVD Mode: Press once for fast forward/fast reverse.

TUNER Mode: Press to go up one frequency step.

MENU Mode: Press once to move the cursor up.

19. ( )

DVD Mode: Press once for slow forward/slow reverse.

TUNER Mode: Press to go down one frequency step.

MENU Mode: Press once to move the cursor down.

20. PLAY/ENTER

DVD Mode: Press once to start a playback.

Press once to confirm a selection.

21. ( )

Press once for disc insertion/ejection.

Press and hold to reset core mechanism position.

22. RESET

Press to reset system settings to factory default (except the

password and parental lock setting).

23. LCD Display

24. TFT Display

25. IR Remote Control Receiver

26. AS (Auto Store)

Press to automatically store strong radio stations in the six

preset channels in the current band.

27. SD Card Slot

8

VM9511TS

CONTROLS AND INDICATORS

LCD Display/Indicators

1. Disc Indicator

Illuminated when disc is loaded

2. DVD Playback Indicators (SCN/RPT/RDM/ALL)

The following DVD playback indicators become Illuminated

when the corresponding function is active:

• SCN: scan playback

• RPT: repeat playback

• RDM: random playback

• ALL: playback all chapters

3. Loudness Indicator (LOUD)

The loudness indicator becomes illuminated when the LOUD

function is activated.

4. Main Display

The main display is an 8 digit, 14 segment LCD which

displays the time, tuning frequency and other text

information.

5. Channel/Disc Display

The channel/disc display is a 2 digit, 7 segment LCD display

which displays the disc number or radio channel indicators

when the corresponding function is active:

• CH: radio is activated

• DISC: DVD mode is activated

6. Stereo/Local Indicator

The stereo/local indicator illuminates one of the following

indicators when the corresponding function is active:

• ST: radio is in stereo mode

• LOC: local radio station seeking function is activated

1 2 3 4 5 6

9

VM9511TS

FRONT ZONE REMOTE CONTROL

NOTE: Your remote control may differ slightly

from the one pictured here. The above diagram is

for illustrative purposes only.

10

VM9511TS

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3 TV XM iPod

MENU 1 Enters the main menu of

the disc

Turns on PBC when

playing VCD

Displays XM Setup Menu Selects Photo mode

TITLE 2 Enters the title menu of

the disc

Plays first ten seconds of

each chapter/title

Selects Music mode

MUTE 3 Toggles on/off audio out-

put

Toggles on/off audio out-

put

Toggles on/off audio out-

put

Toggles on/off audio out-

put

Toggles on/off audio out-

put

Toggles on/off audio out-

put

Toggles on/off audio out-

put

POWER/

4 Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off

AUDIO 5 Changes the audio lan-

guage for disc playback

Selects Video mode

REPT A-B 6 Setup to repeat playback

from time frame A to time

frame B

Setup to repeat playback

from time frame A to time

frame B

REPT 7 Repeats playback of cur-

rent chapter

Repeats playback of cur-

rent chapter

Repeats playback of cur-

rent track

Selects Category Mode Repeats playback of cur-

rent track

SRC 8 Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode Selects playing mode

SUBTITLE 9 Language selection for

subtitle

INFO 10 Displays playing informa-

tion

Displays playing informa-

tion

Displays playing informa-

tion

Display playing informa-

tion

Displays playing informa-

tion

Displays playing informa-

tion

Displays playing informa-

tion

ANGLE

11 Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

angle of TFT screen

Continuously adjusts

angle of TFT screen

Continuously adjusts

angle of TFT screen

ANGLE

12 Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

front panel tilt angle

Continuously adjusts

angle of TFT screen

Continuously adjusts

angle of TFT screen

Continuously adjusts

angle of TFT screen

ANGLE 13 Plays back disc in differ-

ent angle for a scene

Plays back Picture CD

with different angle of

picture displayed

14 Fast forwards the disc

content

Fast forwards the disc

content

Fast forwards the disc

content

Accesses iPod Menu

VOL - 15 Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume

VOL + 16 Increases volume Increases volume Increases volume Increases volume Increases volume Increases volume Increases volume

17 Selects the previous

chapter for playback

Selects the previous

chapter for playback

Searches an available

radio station by decreas-

ing tuning frequency

Selects the previous

track for playback

Searches an available TV

station by decreasing tun-

ing frequency

Searches an available

radio station by decreas-

ing tuning frequency

Pauses playback/starts

playback

18 Pauses playback/starts

playback

Pauses playback/starts

playback

Scans FM/AM radio sta-

tion; plays/stores radio

station; deletes radio sta-

tion

Pauses playback/starts

playback

Scans TV station; plays/

stores TV station; deletes

TV station

Scans XM radio station;

plays/stores radio sta-

tion; deletes radio station

19 Selects the next chapter

for playback

Selects the next chapter

for playback

Searches an available

radio station by increas-

ing tuning frequency

Selects the next track for

playback

Searches an available TV

station by increasing tun-

ing frequency

Searches an available

radio station by increas-

ing tuning frequency

Selects the next track for

playback

BAND 20 Stops playback Stops playback Selects FM/AM band Stops playback Selects XM, XM1, XM2,

or XM3 band

11

VM9511TS

GOTO 21 Goes to specific time

frame and playback

Goes to specific time

frame and playback

22 Slow playback/slow

rewind playback

Slow playback/slow

rewind playback

ZOOM 23 Zooms in/out on an

image

Zooms in/out on an

image

PIC 24 Displays set-up parame-

ters

Displays set-up parame-

ters

OPEN/

CLOSE

25 Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/closes the TFT

monitor

Opens/Closes the TFT

monitor

26 Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

Decreases monitor tilt

angle

27 Increases monitor tilt

angle

Increases monitor tilt

angle

Increases monitor tilt

angle

Increases monitor tilt

angle

Increases monitor tilt

angle

Increases monitor tilt

angle

Increases monitor tilt

angle

DISP 28 Selects display mode:

CINEMA, WIDE, NOR-

MAL or Off (Standby)

Selects display mode:

CINEMA, WIDE, NOR-

MAL or Off (Standby)

Selects display mode:

CINEMA, WIDE, NOR-

MAL or Off (Standby)

Selects display mode:

CINEMA, WIDE, NOR-

MAL or Off (Standby)

Selects display mode:

WIDE or OFF

Selects display mode:

WIDE or OFF

Selects display mode:

WIDE or OFF

1, 2, 3, 4, 5,

6, 7, 8, 9, 0

(Numeric

Keypad)

29 Directly accesses chap-

ter

1-6 selects preset for cur-

rent band

Directly accesses track 1-6 selects preset TV sta-

tions

1-6 selects preset for cur-

rent band

DVD

SETUP

30 Displays DVD Setup

menu

Displays DVD Setup

menu

Displays DVD Setup

menu

Displays DVD Setup

menu

Displays DVD Setup

menu

Displays DVD Setup

menu

Displays DVD Setup

menu

SYS

SETUP

31 Displays System Setup

menu

Displays System Setup

menu

Displays System Setup

menu

Displays System Setup

menu

Displays System Setup

menu

Displays System Setup

menu

Displays System Setup

menu

SEL 32

RDM 33 Plays all chapters in ran-

dom order

Plays all tracks in ran-

dom order

Plays all tracks in random

order

SCN 34 Plays the first ten sec-

onds of each track

EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref# DVD VCD TUNER CD/MP3 TV XM iPod

12

VM9511TS

MULTI-ZONE REMOTE CONTROL

Table 2: Multi-Zone Remote Control Functions

Button Function

Name Ref # DVD VCD

MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD

TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title

MUTE 3 Toggles on/off audio output Toggles on/off audio output

AUDIO 5 Switches the audio language for disc playback

REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback of each chapter/title/disc

R.SRC 8 Selects playing mode for rear zone Selects playing mode for rear zone

SUBTITLE 9 Language selection for subtitle

14 Fast forwards the disc content Fast forwards the disc content

17 Selects the previous track/chapter for playback Selects the previous track/chapter for playback

18 Pauses playback/Starts playback Pauses playback/Starts playback

19 Selects the next track/chapter for playback Selects the next track/chapter for playback

GOTO 21 Goes to specific time frame and playback Goes to specific time frame and playback

22 Slow playback/slow rewind playback Slow playback/slow rewind playback

1, 2, 3, 4, 5,

6, 7, 8, 9, 0

(Numeric

Keypad)

29 Directly accesses chapter

NOTE: Your remote control may differ slightly

from the one pictured here. The above diagram is

for illustrative purposes only.

13

VM9511TS

USING THE TFT MONITOR

Open/Close TFT Monitor

Open TFT Monitor

Press the OPEN button (1) on the front panel or press the

( ) button (25) of the front zone remote control to activate

the mechanism that moves the display panel into the viewing

position.

Close TFT Monitor

Press the OPEN button (1) on the front panel or press the

( ) button (25) of the front zone remote control to load the

display panel back into the compartment.

TFT Monitor Auto Open

If “TFT Auto Open” is “on” when the unit is turned on, the

monitor automatically moves to the viewing position.

If “TFT Auto Open” is ”off” when the unit is turned on, press

the OPEN button (1) or ( ) button (25) on the front zone

remote control to move the monitor into the viewing position.

If “TFT Auto Open” is set to ”Manual”, the TFT will not close

when the key is turned off.

Reverse Driving Use

If the rear-view video camera is connected, the unit is on, and

the monitor is stationed inside the main compartment of the

unit, the monitor automatically moves into the viewing

position and switches to CAMERA mode upon reverse

driving. When the reverse driving stops, the monitor returns

to the main storage compartment.

If the monitor is in display mode, the monitor automatically

switches to CAMERA mode upon reverse driving. When the

reverse driving stops, the monitor return to its original input

mode.

Monitor Tilt Angle Adjustment

A known characteristic of LCD panels is the quality of the

display in relationship to the viewing angle. The monitor

angle can be adjusted for optimum viewing using one of the

following methods:

Step by Step Angle Adjustment

Press the ( ) or ( ) button (3, 4) on the monitor frame to

adjust the tilt angle of the screen one step at a time.

Continuous Angle Adjustment

Press and hold the ( ) or ( ) button (3, 4) on the monitor

frame to adjust the tilt angle in a continuous motion.

Aspect Ratio

Press the DISP button (28) on the remote control or WIDE/

PICTURE button (2) on the monitor to adjust the aspect ratio

as follows:

Image Setting

Table 3 shows the video output mode for each playing

source.

*CVBS – Composite Video Baseband Signal

Adjustable Parameters

While in DVD or TUNER mode, the only parameter that can

be adjusted is brightness (BRIGHT). To access “PICTURE”,

“COLOR”, “CONTRAST”, and “TINT” you must be in AUX,

CAMERA or TV Tuner mode.

NOTE: The default adjustment is “0” in PAL mode. Tint is

unavailable for adjustment.

Parameter Adjustment Procedure

1. Enter Picture Quality Setting mode:

Press the PIC button (24) on the remote or press and

hold the WIDE/PICTURE button (2) on the monitor

panel.

2. Select Item to Set:

Press the (>>) (

<<) buttons (14, 22) on the remote or

press and hold the (/\) or (V) buttons (18, 19) on the

monitor panel.

3. Set Parameters:

Press (|<<) (>>|) buttons (17, 19) on the remote or press

(<) (>) buttons (16, 17) on the monitor panel.

4. Exit Picture Quality Setting Mode:

Press the PIC button (24) on the remote or press and

hold the WIDE/PICTURE button (2) on the monitor

panel.

Parking Brake

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle

brake switch, the front TFT monitor will display video only

when the parking brake sequence is engaged. Before starting

the parking brake sequence, the radio must be on with the

video media disc inserted and playing.

Parking Brake Sequence

There are two situations that can start the Parking Brake

Sequence:

• Parking brake is engaged (on) when the vehicle is started

or the accessory/ignition is turned on. To activate video,

the following sequence of events must be completed:

a. Release parking brake for 2 seconds.

b. Reapply the parking brake for 2 seconds.

c. Video should be displayed on the TFT monitor within 1

~ 2 seconds.

• Parking break is disengaged (off) when the vehicle is

started or the accessory/ignition is turned on. To activate

video, the following sequence of events must be

completed:

a. Set parking brake for 2 seconds.

b. Release parking brake for 2 seconds.

c. Reapply parking brake.

Table 3: Video Output Modes

Playing Source Video Output Modes

AM/FM TUNER RGB Mode

XM TUNER RGB Mode

iPod RGB Mode

DVD RGB Mode

NAV RGB Mode

TV CVBS Mode

AUX IN CVBS Mode

CAMERA CVBS Mode

CINEMA

The entire screen is extended

horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at

any point.

WIDE

The screen is extended horizontally to

the aspect ratio of 16 to 9. The

extension ratio increases toward the

right and left ends of the screen.

NORMAL

The conventional display image has a

4 to 3 ratio of horizontal to vertical,

leaving a blank area on the right and

left sides of the display.

OFF

14

VM9511TS

d. Video should be displayed on the TFT monitor within 1

~ 2 seconds.

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following

protective measurements can be executed to prevent

damage to the mechanism or monitor:

After the protective procedure is executed, normal operation

is resumed by pressing the OPEN button (1) or disconnecting

and reconnecting the power.

Table 4: Monitor Protective Measures

Obstruction

Self

Protection

OPEN Button

Pressed

Power

Reconnected

Monitor load-

ing out hori-

zontally

Monitor is auto-

matically

loaded into unit

Monitor fully

extended hori-

zontally

Monitor is auto-

matically

loaded into unit

Monitor load-

ing in hori-

zontally

Unit stops at

obstruction

point

Monitor fully

extended hori-

zontally

Monitor is auto-

matically

loaded into unit

Monitor load-

ing out verti-

cally

Unit stops at

obstruction

point

Monitor swiv-

els back to the

unit

Monitor swiv-

els back to the

unit

Monitor load-

ing in verti-

cally

Unit stops at

obstruction

point

Monitor swiv-

els back to the

unit

Monitor swiv-

els back to the

unit

15

VM9511TS

OPERATING INSTRUCTIONS

Power On / Off

Press the

/MUTE

button (7) to turn the unit on. The buttons on the

front of the unit light up and “WELCOME” appears briefly in the LCD

panel (23), followed by the current mode status. If the TFT screen is

open, only the current mode status is displayed. You can also turn

on the unit by pressing the

OPEN

button (1) and opening the TFT

screen.

Press and hold the

/MUTE

button (7) on the front panel or the

POWER

button (4) on the remote to power off the unit.The monitor

is drawn back into the main compartment and the LCD screen

displays “BYE BYE”.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The beep

tone cannot be disabled.

Mute

Press the

/MUTE

button (7) on the front panel or the

MUTE

button

(3) on the remote to mute the volume from the unit. Press the

MUTE

button again to restore the volume. “MUTE” is displayed on the LCD

monitor. Adjusting the volume or using any of the audio setup

features cancels the mute function.

Playing Source Selection

Press the SRC button (15) on the front panel or the SRC

button (8) on the remote to change between available playing

sources in the following order: TUNER, DVD, CD Changer,

AUX IN, CAMERA (rear view video camera) and SD. The

playing mode is displayed on the TFT and LCD screens.

AUX IN Mode

An external peripheral device can be connected to this unit

via RCA output and “AUX-IN”.

CAMERA Mode

“CAMERA” mode is only available if the camera is connected and

during reverse driving. To install a rear view video camera, connect

the video input cable to the camera output cable.

Volume Adjustment

To increase or decrease the volume level, turn the

ROTARY

ENCODER

(6) on the front panel or press the

VOL+/ VOL-

buttons

(15, 16) on remote control. When the volume level reaches “0” or

“40”, a beep sounds, indicating that the adjustment limit has been

reached. The volume ranges from “0” to “40”. The LCD or TFT

screen displays the volume level for 3 seconds.

Programmable Turn-On Volume

This feature allows the user to select a turn-on volume setting

regardless of the volume setting prior to turning the unit off.

To program a specific volume level, push and hold the VOL/

LO/DX knob (6) while the yellow volume bar is displayed on

the screen. The unit will beep two times to confirm your turn-

on volume setting.

Audio Control Menu

The Audio Control feature allows you to easily adjust your audio

system to meet the acoustical characteristics of your vehicle, which

vary depending on the type of vehicle and its measurements. To get

the best possible sound quality from your new system, be sure to

adjust the settings for the speakers as well. Proper setting of the

Fader and Balance boosts the effects of the cabin equalizer.

Accessing the Audio Control Menu

Press the

VOL/LO/DX

knob (6) on the front panel once to display

the “AUDIO” menu.

Selecting an Audio Feature for Adjustment

Continuously press the

VOL/LO/DX

knob (6) on the front panel, or

press the (

>>

)/(

<<

) buttons (14, 22) on the remote control or the (

/\

)/

(

V

) buttons (18, 19) on the joystick to select the audio feature to be

adjusted.

Adjusting an Audio Feature

Rotate the

VOL/LO/DX

knob (6), press the (

|<<

)/(

>>|

) buttons (17,

19) on the remote control, or press the (

<

)/(

>

) buttons (16, 17) on the

joystick to adjust the selected feature to the desired setting.

NOTE: The Bass and Treble levels are only adjustable

when EQ is set to “User” mode.

The Loud function compensates for deficiencies in sound ranges at

low levels. Loudness levels range from 1-4 or “off”. When the Loud

function is on, “LOUD” is displayed on the screen.

Exiting the Audio Control Menu

Press and hold the

VOL/LO/DX

knob (6) or stop making

adjustments for a few seconds to exit the audio control menu.

Six-Channel Audio Control

NOTE: Before adjusting the volume of any speaker,

please refer to “Surround Sound” on page 26.

Rear Zone

If a monitor is installed in the rear zone and connected to the

rear zone AV output, passengers in the back seat can control

the DVD output using the rear zone remote control. See

“Multi-Zone Remote Control” on page 12 for instructions.

System Reset

To correct a system halt or other illegal

operation, use the tip of a pen to press the

RESET

button (22) located on the front

bottom-right corner of the unit. After a system reset, the unit restores

all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD

resumes play once the reset is complete.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a

telephone call is received by the car phone or when verbal

navigation is performed.

Table 5: Audio Adjustments

Audio Function Adjustable Range

EQ User

Flat

Jazz

Pop

Classical

Rock

Vocal

BASS -14 to +14

TREBL -14 to +14

SUB -7 to +7

LOUD 0 (off), 1-4

FAD (Fade) -9 to +9

BAL -9 to +9

Table 6: 6-Channel Audio Adjustments

Item Adjustable Range

Master Volume 00 to 40

Front Left Channel Volume -10 to +10

Front Right Channel Volume -10 to +10

Rear Left Channel Volume -10 to +10

Rear Right Channel Volume -10 to +10

Center Channel Volume -10 to +10

Subwoofer Volume -10 to +10

[RESET] Butto

n

16

VM9511TS

SYSTEM SETUP MENU

In “System Setup” mode, “ASP CONFIG” and “GENERAL

SETUP” are available for adjustment. Setup can be

performed by pressing the dedicated button on the remote

control or by touching the top left corner of the TFT screen.

For system settings, press the SYS SETUP button (31) on

the remote control or touch “SETUP” on the screen to enter

the “SETUP” menu. “SYS SETUP” is highlighted in green.

General Setup Menu

Accessing the General Setup Menu

To access the “GENERAL SETUP” Menu, press the direction

buttons on the joystick (16, 17, 18, 19) or remote control (14,

17, 18, 19, 22) to highlight “GENERAL SETUP” in green.

Press the >/|| button (18) on the remote control to enter the

“GENERAL SETUP” menu. A menu appears with the option

for the first item, “Radio”, highlighted in light blue.

Selecting a Feature for Adjustment

Press the >> or

<< buttons (14, 22) on the remote control or

the /\ or V buttons (18, 19) on the joystick to select the feature

to be adjusted.

Adjusting a Feature

1. Enter the option field for the feature you want to adjust

by pressing the >/|| button (18) on the remote or by

pressing the ENTER (joystick) button (20) on the unit. A

submenu appears in a second row with the selected

option highlighted in light blue.

2. Select a new value by pressing the >> or

<< buttons (14,

22) on the remote control or the /\ or V buttons (18, 19)

on the joystick.

3. Confirm your selection by pressing the

<<, |<<, or >>|

buttons (14, 17, 19) on the remote control, or the < or >

button (16, 17) on the joystick. The new value is

highlighted in light blue and setup is complete.

Adjusting the Clock

1. Access the “Clock” setting under the General Setup

menu.

2. Press the >> or

<< buttons (14, 22) on the remote

control or the /\ or V buttons (18, 19) on the joystick to

move the cursor to the “Hour” or “Min” position.

3. Press the |<< or >>| buttons (17, 19) on the remote

control or the < or > buttons (16, 17) on the joystick to

adjust the hour or minutes.

4. Press the

<< button (14) on the remote control to confirm

setup.

DIRECTION BUTTONS

Table 7: General Setup Menu Features

Setting Options Function

Radio USA • AM Frequency Spacing - 10kHz

• AM Frequency Band -

530kHz~1720kHz

• FM Frequency Spacing - 200kHz

• FM Frequency Band -

87.5MHz~107.9MHz

Europe • AM Frequency Spacing - 9kHz

• AM Frequency Band -

522kHz~1620kHz

• FM Frequency Spacing - 50kHz

• FM Frequency Band -

87.5MHz~108.0MHz

South

America 1

• AM Frequency Spacing - 10kHz

• AM Frequency Band -

530kHz~1720kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

South

America 2

• AM Frequency Spacing - 5kHz

• AM Frequency Band -

520kHz~1600kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Arabia • AM Frequency Spacing - 9kHz

• AM Frequency Band -

531kHz~1620kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Korea • AM Frequency Spacing - 9kHz

• AM Frequency Band -

531kHz~1602kHz

• FM Frequency Spacing - 200kHz

• FM Frequency Band -

88.1MHz~107.9MHz

China • AM Frequency Spacing - 9kHz

• AM Frequency Band -

522kHz~1620kHz

• FM Frequency Spacing - 100kHz

• FM Frequency Band -

87.5MHz~108.0MHz

Clock Mode 12H Clock displays 12 hour time using

AM and PM.

24H Clock displays 24 hour time up to

23:59.

Screen Saver On Turn screen saver on/off.

Off

Video Format

(Input cir-

cuitry auto-

detects the

video signal

from the

CAMERA

and Aux In

video source.

Video format

does not

affect the TV

tuner - this is

an NTSC TV

tuner only.

Auto The color signal output is switched

automatically based on the current

video input signal - NTSC or PAL.

NTSC The color signals are output in the

standard NTSC format.

PAL The color signals are output in the

standard PAL format.

TFT Auto

Open

On The TFT panel automatically opens

when the unit is turned on.

Off You must press the OPEN button

(1) to open the TFT panel.

Manual When the ignition is turned OFF,

the TFT panel DOES NOT retract if

it was previously out

OSD Lan-

guage

English The menus are displayed in English

only.

Clock (HH:MM) See “Adjusting the clock” to learn

how to set the clock.

BACK Return to previous menu.

Table 7: General Setup Menu Features

Setting Options Function

La page charge ...

Archos VM9511TS Manuel utilisateur

Ce manuel convient également à

Archos VM9511TS Manuel utilisateur

dans d''autres langues

Autres documents