Garmin A04252 Manuel utilisateur

EPIX™ (GEN 2)

Quick Start Manual 4

Manuel de démarrage rapide 18

Manuale di avvio rapido 36

Schnellstartanleitung 53

Guía de inicio rápido 72

Manual de início rápido 89

Garmin®, the Garmin logo, and QuickFit® are trademarks of Garmin

Ltd. or its subsidiaries, registered in the USA and other countries.

epix™, Connect IQ™, Firstbeat Analytics™, Garmin Connect™,

Garmin Express™, and Garmin Pay™ are trademarks of Garmin Ltd.

or its subsidiaries. These trademarks may not be used without the

express permission of Garmin.

The BLUETOOTH® word mark and logos are owned by the

Bluetooth SIG, Inc. and any use of such marks by Garmin is under

license. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation.

Other trademarks and trade names are those of their respective

owners.

El número de registro COFETEL/IFETEL puede ser revisado en el

manual a través de la siguiente página de internet.

epix™ (Gen 2)

Quick Start Manual

Introduction

WARNING

See the Important Safety and

Product Information guide in

the product box for product

warnings and other important

information.

Always consult your

physician before you begin or

modify any exercise

program.

Getting Started

When using your watch the

first time, you should

complete these tasks to set

it up and get to know the

basic features.

1Press LIGHT to turn on

the watch (page 5).

2Follow the on-screen

instructions to complete

the initial setup.

During the initial setup,

you can pair your

smartphone with your

watch to receive

notifications, set up your

Garmin Pay™ wallet, and

more (page 8).

3Charge the device

completely (page 15).

4Start an activity

(page 11).

4 Quick Start Manual

EN

Device Overview

Touchscreen

• Tap to choose an

option in a menu.

• Hold the watch face

data to open the

glance.

• Swipe up or down to

scroll through the

glance loop and

menus.

• Swipe right to return

to the previous

screen.

• Cover the screen

with your palm to

return to the watch

face and turn down

the display

brightness.

LIGHT

• Press to turn on the

device.

• Press to turn down

the display

brightness.

• Quickly press twice

to turn on the screen

to use your device as

a flashlight.

Quick Start Manual 5

EN

• Hold to view the

controls menu.

UP·MENU

• Press to scroll

through the glance

loop and menus.

• Hold to view the

menu.

DOWN

• Press to scroll

through the glance

loop and menus.

• Hold to view the

music controls from

any screen.

START·STOP

• Press to choose an

option in a menu.

• Press to view the

activity list and start

or stop an activity.

BACK·LAP

• Press to return to the

previous screen.

• Press to record a lap,

rest, or transition

during a multisport

activity.

• Hold to view the

watch face from any

screen.

Enabling and Disabling the

Touchscreen

• To temporarily enable or

disable the touchscreen,

hold DOWN and START.

6 Quick Start Manual

EN

• To enable or disable the

touchscreen during

general use, activities, or

sleep, hold MENU, select

System > Touch, and

select an option.

Using the Watch

• Hold LIGHT to view the

controls menu.

The controls menu

provides quick access to

frequently used

functions, such as

turning on do not disturb

mode, saving a location,

and turning the watch

off.

• From the watch face,

press UP or DOWN to

scroll through the glance

loop (page 7).

• From the watch face,

press START to start an

activity or open an app

(page 10).

• Hold MENU to customize

the watch face, adjust

settings, and pair

wireless sensors.

Viewing the Glance Loop

Glances provide quick

access to health data,

activity information, on-

device sensors, and more.

When you pair your device,

you can view data from your

smartphone, such as

Quick Start Manual 7

EN

notifications, weather, and

calendar events.

1Press UP or DOWN.

The device scrolls

through the glance loop

and displays summary

data for each glance.

TIP: You can also swipe

to scroll or tap to select

options.

2Press START to view

more information.

3Select an option:

• Press DOWN to view

details about a

glance.

• Press START to view

additional options

and functions for a

glance.

Smart Features

Pairing Your Smartphone

To use the connected

features on your watch, you

must pair it directly through

the Garmin Connect™ app,

instead of from the

Bluetooth® settings on your

smartphone.

1From the app store on

your smartphone, install

8 Quick Start Manual

EN

and open the Garmin

Connect app.

2During the initial setup,

select Yes when you are

prompted to pair with

your smartphone.

3Follow the instructions in

the app to complete the

pairing and setup

process.

Setting Up Your

Garmin Pay Wallet

The Garmin Pay feature

allows you to use your watch

to pay for purchases in

participating stores. You can

add one or more

participating credit or debit

cards to your Garmin Pay

wallet. Go to garmin.com

/garminpay/banks to find

participating financial

institutions.

1From the Garmin

Connect app, select

or .

2Select Garmin Pay > Get

Started.

3Follow the on-screen

instructions.

You can open your

Garmin Pay wallet from the

controls menu on your

device. See the owner's

manual for more information

on using the Garmin Pay

feature.

Quick Start Manual 9

EN

Music

You can download audio

content to your device, so

you can listen when your

smartphone is not nearby.

The Garmin Connect app and

Garmin Express™ application

allow you to download audio

content from a third-party

provider or your computer.

You can use the music

controls to control music

playback on your smartphone

or to play music stored on

your device. To listen to

audio content stored on your

device, you must connect

headphones with Bluetooth

technology.

Connect IQ™ Features

You can add Connect IQ

features to your watch from

Garmin® and other providers

using the Connect IQ app.

You can customize your

device with watch faces, data

fields, glances, and apps.

Activities and Apps

Your device can be used for

indoor, outdoor, athletic, and

fitness activities. When you

start an activity, the device

displays and records sensor

data. You can save activities

and share them with the

Garmin Connect community.

You can also add Connect IQ

activities and apps to your

10 Quick Start Manual

EN

device using the Connect IQ

app (page 10).

Starting an Activity

1From the watch face,

press START.

2The first time you start

an activity, select the

checkbox next to each of

your favorites, and select

Done.

Your favorite activities

appear at the top of the

list, providing quick

access to the ones you

use most. Additional

activities appear in the

extended list.

3Select an activity.

4If the activity requires

GPS, go outside, and wait

while the device locates

satellites.

5Press START to start the

activity timer.

NOTE: The device does

not record your activity

data until you start the

activity timer.

6After you complete your

activity, press STOP to

stop the activity timer.

7Select Save to save the

activity and review the

activity summary.

Power Modes

Power modes allow you to

quickly adjust system

Quick Start Manual 11

EN

settings, activity settings,

and GPS settings to extend

battery life during an activity.

For example, power modes

can disconnect paired

sensors and turn on the

UltraTrac GPS option. The

watch displays the hours of

battery life gained with each

power mode. You can also

create custom power modes.

During an activity, hold

MENU, select Power Mode,

and select an option.

Map

Your device can display

several types of Garmin map

data, including topographical

contours, nearby points of

interest, ski resort maps, and

golf courses. You can use

the Map Manager to

download additional maps or

manage map storage.

Viewing the Map

1Go outside, and start a

GPS activity (page 11).

2Press UP or DOWN to

scroll to the map screen.

3Select an option to pan

and zoom the map:

• To use the

touchscreen, tap the

map, tap and drag to

position the

crosshairs, and press

UP or DOWN to zoom

in or out.

12 Quick Start Manual

EN

• To use the buttons,

hold MENU, select

Pan/Zoom, and press

UP or DOWN to zoom

in or out.

NOTE: You can press

START to toggle

between panning up

and down, panning

left and right, or

zooming.

4Hold START to select the

point indicated by the

crosshairs.

Managing Maps

When you connect your

paired phone to a Wi‑Fi®

network, you can download

maps for additional regions.

You can also remove maps

to increase the available

device storage.

1Hold MENU.

2Select Map > Map

Manager.

3Select a map category.

4Select an option:

• To download a map,

select Add Map,

select a map, press

START, and select

Download.

NOTE: To prevent

battery drain, the

device queues the

map download for

later, and the

download starts

Quick Start Manual 13

EN

when you connect

the device to an

external power

source.

• To remove a map,

select a map, press

START, and select

Remove.

Device Information

About the AMOLED Display

By default, the watch

settings are optimized for

battery life and performance.

Image persistence, or pixel

"burn-in," is normal behavior

for AMOLED devices. To

extend the display life, you

should avoid displaying

static images at high

brightness levels for long

time periods. To minimize

burn-in, the display turns off

after the selected timeout.

You can turn your wrist

toward your body, tap the

touchscreen, or press a

button to wake the device.

Wearing the Device

• Wear the device above

your wrist bone.

NOTE: The device should

be snug but comfortable.

For more accurate heart

rate readings, the device

should not move while

running or exercising.

For pulse oximeter

14 Quick Start Manual

EN

readings, you should

remain motionless.

NOTE: The optical

sensor is located on the

back of the device.

• See the owner's manual

for more information.

Changing the QuickFit®

Bands

Charging the Device

WARNING

This device contains a

lithium-ion battery. See the

Important Safety and Product

Information guide in the

product box for product

warnings and other important

information.

NOTICE

To prevent corrosion,

thoroughly clean and dry the

contacts and the surrounding

area before charging or

connecting to a computer.

Refer to the cleaning

instructions in the owner's

manual.

Quick Start Manual 15

EN

1Plug the small end of the

USB cable into the

charging port on your

device.

2Plug the large end of the

USB cable into a USB

charging port.

3Charge the device

completely.

Specifications

Operating temperature

range: From -20 to 45°C

(from -4 to 113°F)

Charging temperature range:

USB charging: from 0 to

45°C (from 32 to 113°F)

Wireless frequency (EU):

2.4 GHz @ 19.9 dBm maximum

EU SAR:

0.32 W/kg torso, 0.28W/kg limb

Troubleshooting

Restarting Your Device

1Hold LIGHT until the

device turns off.

2Hold LIGHT to turn on

the device.

16 Quick Start Manual

EN

My device is in the wrong

language

Go to garmin.com

/manuals/epix2

/language for more

information on changing

your device language.

Getting the Owner's

Manual

The owner's manual includes

instructions for using device

features and accessing

regulatory information.

Go to garmin.com

/manuals/epix2.

Getting More Information

You can find more

information about this

product on the Garmin

website.

• Go to

support.garmin.com for

additional manuals,

articles, and software

updates.

• Go to buy.garmin.com,

or contact your Garmin

dealer for information

about optional

accessories and

replacement parts.

• Go to www.garmin.com

/ataccuracy for

information about

feature accuracy.

This is not a medical

device.

Quick Start Manual 17

EN

epix™ (Gen 2)

Manuel de démarrage

rapide

Introduction

AVERTISSEMENT

Consultez le guide

Informations importantes sur

le produit et la sécurité inclus

dans l'emballage du produit

pour prendre connaissance

des avertissements et autres

informations importantes sur

le produit.

Consultez toujours votre

médecin avant de

commencer ou de modifier

tout programme d'exercice

physique.

Mise en route

Lors de la première

utilisation de la montre, vous

devrez effectuer les

opérations suivantes pour la

configurer et vous

familiariser avec les

fonctions de base.

1Appuyez sur le bouton

LIGHT pour allumer la

montre (page 19).

2Suivez les instructions à

l'écran pour procéder au

réglage initial.

Pendant la phase de

configuration initiale,

vous pouvez coupler

votre smartphone avec

votre montre pour

18 Manuel de démarrage rapide

FR

recevoir des

notifications, paramétrer

votre portefeuille

Garmin Pay et bien plus

encore (page 24).

3Chargez l'appareil

complètement

(page 33).

4Démarrez une activité

(page 27).

Présentation de l'appareil

Ecran tactile

• appuyez pour choisir

une option dans un

menu.

• Maintenez les

données du cadran

de montre enfoncées

pour ouvrir le résumé

de widget.

• Faites glisser l'écran

vers le haut ou vers

le bas pour parcourir

les résumés de

widget et les menus.

• Faites glisser l'écran

vers la droite pour

revenir à l'écran

précédent.

Manuel de démarrage rapide 19

FR

• Couvrez l'écran avec

votre paume pour

revenir au cadran de

la montre et réduire

la luminosité de

l'écran.

LIGHT

• appuyez sur ce

bouton pour allumer

l'appareil.

• Appuyez sur ce

bouton pour réduire

la luminosité de

l'écran.

• Appuyez deux fois

rapidement sur ce

bouton pour allumer

l'écran et utiliser

votre appareil

comme lampe de

poche.

• Maintenez ce bouton

enfoncé pour

afficher le menu des

commandes.

UP·MENU

• appuyez sur ce

bouton pour faire

défiler les résumés

de widget et les

menus.

• Maintenez ce bouton

enfoncé pour

afficher le menu.

DOWN

• appuyez sur ce

bouton pour faire

défiler les résumés

20 Manuel de démarrage rapide

FR

La page charge ...

Garmin A04252 Manuel utilisateur

Garmin A04252 Manuel utilisateur

dans d''autres langues

Documents connexes