Garmin A04252 Manuel utilisateur

Taper
Manuel utilisateur
EPIX (GEN 2)
Quick Start Manual 4
Manuel de démarrage rapide 18
Manuale di avvio rapido 36
Schnellstartanleitung 53
Guía de inicio rápido 72
Manual de início rápido 89
© 2021 Garmin Ltd. or its subsidiaries
Garmin®, the Garmin logo, and QuickFit® are trademarks of Garmin
Ltd. or its subsidiaries, registered in the USA and other countries.
epix, Connect IQ, Firstbeat Analytics, Garmin Connect,
Garmin Express, and Garmin Pay are trademarks of Garmin Ltd.
or its subsidiaries. These trademarks may not be used without the
express permission of Garmin.
The BLUETOOTH® word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Garmin is under
license. WiFi® is a registered mark of Wi-Fi Alliance Corporation.
Other trademarks and trade names are those of their respective
owners.
El número de registro COFETEL/IFETEL puede ser revisado en el
manual a través de la siguiente página de internet.
epix (Gen 2)
Quick Start Manual
Introduction
WARNING
See the Important Safety and
Product Information guide in
the product box for product
warnings and other important
information.
Always consult your
physician before you begin or
modify any exercise
program.
Getting Started
When using your watch the
first time, you should
complete these tasks to set
it up and get to know the
basic features.
1Press LIGHT to turn on
the watch (page 5).
2Follow the on-screen
instructions to complete
the initial setup.
During the initial setup,
you can pair your
smartphone with your
watch to receive
notifications, set up your
Garmin Pay wallet, and
more (page 8).
3Charge the device
completely (page 15).
4Start an activity
(page 11).
4 Quick Start Manual
EN
Device Overview
Touchscreen
Tap to choose an
option in a menu.
Hold the watch face
data to open the
glance.
Swipe up or down to
scroll through the
glance loop and
menus.
Swipe right to return
to the previous
screen.
Cover the screen
with your palm to
return to the watch
face and turn down
the display
brightness.
LIGHT
Press to turn on the
device.
Press to turn down
the display
brightness.
Quickly press twice
to turn on the screen
to use your device as
a flashlight.
Quick Start Manual 5
EN
Hold to view the
controls menu.
UP·MENU
Press to scroll
through the glance
loop and menus.
Hold to view the
menu.
DOWN
Press to scroll
through the glance
loop and menus.
Hold to view the
music controls from
any screen.
START·STOP
Press to choose an
option in a menu.
Press to view the
activity list and start
or stop an activity.
BACK·LAP
Press to return to the
previous screen.
Press to record a lap,
rest, or transition
during a multisport
activity.
Hold to view the
watch face from any
screen.
Enabling and Disabling the
Touchscreen
To temporarily enable or
disable the touchscreen,
hold DOWN and START.
6 Quick Start Manual
EN
To enable or disable the
touchscreen during
general use, activities, or
sleep, hold MENU, select
System > Touch, and
select an option.
Using the Watch
Hold LIGHT to view the
controls menu.
The controls menu
provides quick access to
frequently used
functions, such as
turning on do not disturb
mode, saving a location,
and turning the watch
off.
From the watch face,
press UP or DOWN to
scroll through the glance
loop (page 7).
From the watch face,
press START to start an
activity or open an app
(page 10).
Hold MENU to customize
the watch face, adjust
settings, and pair
wireless sensors.
Viewing the Glance Loop
Glances provide quick
access to health data,
activity information, on-
device sensors, and more.
When you pair your device,
you can view data from your
smartphone, such as
Quick Start Manual 7
EN
notifications, weather, and
calendar events.
1Press UP or DOWN.
The device scrolls
through the glance loop
and displays summary
data for each glance.
TIP: You can also swipe
to scroll or tap to select
options.
2Press START to view
more information.
3Select an option:
Press DOWN to view
details about a
glance.
Press START to view
additional options
and functions for a
glance.
Smart Features
Pairing Your Smartphone
To use the connected
features on your watch, you
must pair it directly through
the Garmin Connect app,
instead of from the
Bluetooth® settings on your
smartphone.
1From the app store on
your smartphone, install
8 Quick Start Manual
EN
and open the Garmin
Connect app.
2During the initial setup,
select Yes when you are
prompted to pair with
your smartphone.
3Follow the instructions in
the app to complete the
pairing and setup
process.
Setting Up Your
Garmin Pay Wallet
The Garmin Pay feature
allows you to use your watch
to pay for purchases in
participating stores. You can
add one or more
participating credit or debit
cards to your Garmin Pay
wallet. Go to garmin.com
/garminpay/banks to find
participating financial
institutions.
1From the Garmin
Connect app, select
or .
2Select Garmin Pay > Get
Started.
3Follow the on-screen
instructions.
You can open your
Garmin Pay wallet from the
controls menu on your
device. See the owner's
manual for more information
on using the Garmin Pay
feature.
Quick Start Manual 9
EN
Music
You can download audio
content to your device, so
you can listen when your
smartphone is not nearby.
The Garmin Connect app and
Garmin Express application
allow you to download audio
content from a third-party
provider or your computer.
You can use the music
controls to control music
playback on your smartphone
or to play music stored on
your device. To listen to
audio content stored on your
device, you must connect
headphones with Bluetooth
technology.
Connect IQ Features
You can add Connect IQ
features to your watch from
Garmin® and other providers
using the Connect IQ app.
You can customize your
device with watch faces, data
fields, glances, and apps.
Activities and Apps
Your device can be used for
indoor, outdoor, athletic, and
fitness activities. When you
start an activity, the device
displays and records sensor
data. You can save activities
and share them with the
Garmin Connect community.
You can also add Connect IQ
activities and apps to your
10 Quick Start Manual
EN
device using the Connect IQ
app (page 10).
Starting an Activity
1From the watch face,
press START.
2The first time you start
an activity, select the
checkbox next to each of
your favorites, and select
Done.
Your favorite activities
appear at the top of the
list, providing quick
access to the ones you
use most. Additional
activities appear in the
extended list.
3Select an activity.
4If the activity requires
GPS, go outside, and wait
while the device locates
satellites.
5Press START to start the
activity timer.
NOTE: The device does
not record your activity
data until you start the
activity timer.
6After you complete your
activity, press STOP to
stop the activity timer.
7Select Save to save the
activity and review the
activity summary.
Power Modes
Power modes allow you to
quickly adjust system
Quick Start Manual 11
EN
settings, activity settings,
and GPS settings to extend
battery life during an activity.
For example, power modes
can disconnect paired
sensors and turn on the
UltraTrac GPS option. The
watch displays the hours of
battery life gained with each
power mode. You can also
create custom power modes.
During an activity, hold
MENU, select Power Mode,
and select an option.
Map
Your device can display
several types of Garmin map
data, including topographical
contours, nearby points of
interest, ski resort maps, and
golf courses. You can use
the Map Manager to
download additional maps or
manage map storage.
Viewing the Map
1Go outside, and start a
GPS activity (page 11).
2Press UP or DOWN to
scroll to the map screen.
3Select an option to pan
and zoom the map:
To use the
touchscreen, tap the
map, tap and drag to
position the
crosshairs, and press
UP or DOWN to zoom
in or out.
12 Quick Start Manual
EN
To use the buttons,
hold MENU, select
Pan/Zoom, and press
UP or DOWN to zoom
in or out.
NOTE: You can press
START to toggle
between panning up
and down, panning
left and right, or
zooming.
4Hold START to select the
point indicated by the
crosshairs.
Managing Maps
When you connect your
paired phone to a Wi‑Fi®
network, you can download
maps for additional regions.
You can also remove maps
to increase the available
device storage.
1Hold MENU.
2Select Map > Map
Manager.
3Select a map category.
4Select an option:
To download a map,
select Add Map,
select a map, press
START, and select
Download.
NOTE: To prevent
battery drain, the
device queues the
map download for
later, and the
download starts
Quick Start Manual 13
EN
when you connect
the device to an
external power
source.
To remove a map,
select a map, press
START, and select
Remove.
Device Information
About the AMOLED Display
By default, the watch
settings are optimized for
battery life and performance.
Image persistence, or pixel
"burn-in," is normal behavior
for AMOLED devices. To
extend the display life, you
should avoid displaying
static images at high
brightness levels for long
time periods. To minimize
burn-in, the display turns off
after the selected timeout.
You can turn your wrist
toward your body, tap the
touchscreen, or press a
button to wake the device.
Wearing the Device
Wear the device above
your wrist bone.
NOTE: The device should
be snug but comfortable.
For more accurate heart
rate readings, the device
should not move while
running or exercising.
For pulse oximeter
14 Quick Start Manual
EN
readings, you should
remain motionless.
NOTE: The optical
sensor is located on the
back of the device.
See the owner's manual
for more information.
Changing the QuickFit®
Bands
Charging the Device
WARNING
This device contains a
lithium-ion battery. See the
Important Safety and Product
Information guide in the
product box for product
warnings and other important
information.
NOTICE
To prevent corrosion,
thoroughly clean and dry the
contacts and the surrounding
area before charging or
connecting to a computer.
Refer to the cleaning
instructions in the owner's
manual.
Quick Start Manual 15
EN
1Plug the small end of the
USB cable into the
charging port on your
device.
2Plug the large end of the
USB cable into a USB
charging port.
3Charge the device
completely.
Specifications
Operating temperature
range: From -20 to 45°C
(from -4 to 113°F)
Charging temperature range:
USB charging: from 0 to
45°C (from 32 to 113°F)
Wireless frequency (EU):
2.4 GHz @ 19.9 dBm maximum
EU SAR:
0.32 W/kg torso, 0.28W/kg limb
Troubleshooting
Restarting Your Device
1Hold LIGHT until the
device turns off.
2Hold LIGHT to turn on
the device.
16 Quick Start Manual
EN
My device is in the wrong
language
Go to garmin.com
/manuals/epix2
/language for more
information on changing
your device language.
Getting the Owner's
Manual
The owner's manual includes
instructions for using device
features and accessing
regulatory information.
Go to garmin.com
/manuals/epix2.
Getting More Information
You can find more
information about this
product on the Garmin
website.
Go to
support.garmin.com for
additional manuals,
articles, and software
updates.
Go to buy.garmin.com,
or contact your Garmin
dealer for information
about optional
accessories and
replacement parts.
Go to www.garmin.com
/ataccuracy for
information about
feature accuracy.
This is not a medical
device.
Quick Start Manual 17
EN
epix (Gen 2)
Manuel de démarrage
rapide
Introduction
AVERTISSEMENT
Consultez le guide
Informations importantes sur
le produit et la sécurité inclus
dans l'emballage du produit
pour prendre connaissance
des avertissements et autres
informations importantes sur
le produit.
Consultez toujours votre
médecin avant de
commencer ou de modifier
tout programme d'exercice
physique.
Mise en route
Lors de la première
utilisation de la montre, vous
devrez effectuer les
opérations suivantes pour la
configurer et vous
familiariser avec les
fonctions de base.
1Appuyez sur le bouton
LIGHT pour allumer la
montre (page 19).
2Suivez les instructions à
l'écran pour procéder au
réglage initial.
Pendant la phase de
configuration initiale,
vous pouvez coupler
votre smartphone avec
votre montre pour
18 Manuel de démarrage rapide
FR
recevoir des
notifications, paramétrer
votre portefeuille
Garmin Pay et bien plus
encore (page 24).
3Chargez l'appareil
complètement
(page 33).
4Démarrez une activité
(page 27).
Présentation de l'appareil
Ecran tactile
appuyez pour choisir
une option dans un
menu.
Maintenez les
données du cadran
de montre enfoncées
pour ouvrir le résumé
de widget.
Faites glisser l'écran
vers le haut ou vers
le bas pour parcourir
les résumés de
widget et les menus.
Faites glisser l'écran
vers la droite pour
revenir à l'écran
précédent.
Manuel de démarrage rapide 19
FR
Couvrez l'écran avec
votre paume pour
revenir au cadran de
la montre et réduire
la luminosité de
l'écran.
LIGHT
appuyez sur ce
bouton pour allumer
l'appareil.
Appuyez sur ce
bouton pour réduire
la luminosité de
l'écran.
Appuyez deux fois
rapidement sur ce
bouton pour allumer
l'écran et utiliser
votre appareil
comme lampe de
poche.
Maintenez ce bouton
enfoncé pour
afficher le menu des
commandes.
UP·MENU
appuyez sur ce
bouton pour faire
défiler les résumés
de widget et les
menus.
Maintenez ce bouton
enfoncé pour
afficher le menu.
DOWN
appuyez sur ce
bouton pour faire
défiler les résumés
20 Manuel de démarrage rapide
FR
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Garmin A04252 Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues