Chauvet NET-X II Manuel utilisateur

User Manual

Version: V2.3

Net-X II User Manual Rev. 8

Edition Notes

The Net-X II User Manual includes a description, safety precautions, installation, programming, operation,

and maintenance instructions for the Net-X II as of the release date of this edition.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR

WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration

.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,

France, and Germany: www.chauvetlighting.eu/warranty-registration

.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal

use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited

warranty on our website. This warranty extends only to the original purchaser of the product and is not

transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an

original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE

ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You

may also have other rights that vary from state to state and country to country. This warranty is valid only in

the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,

Germany, and Mexico. For warranty terms in other countries, please consult your local distributor.

Trademarks

CHAUVET, the Chauvet logo, and Net-X II are registered trademarks or trademarks of Chauvet & Sons,

LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and

product names and logos referred to herein may be trademarks of their respective companies.

Copyright Notice

The works of authorship contained in this manual, including, but not limited to, all designs, texts, and

images are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com

.

Document Revision

This Net-X II User Manual is the 8th edition of this document. Go to www.chauvetprofessional.com for the

latest version.

Net-X II User Manual Rev. 8

i

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Manual Conventions ..................................................................................... 1

Symbols ........................................................................................................ 1

Safety Notes.................................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions...................................................................................... 4

3. Setup ........................................................................................... 5

AC Power...................................................................................................... 5

Fuse Replacement........................................................................................ 5

Mounting ....................................................................................................... 5

Orientation..................................................................................................... 5

Mounting Diagram......................................................................................... 6

Installation Guidelines................................................................................... 6

Signal Connections ....................................................................................... 6

Art-Net™ Connection ..................................................................................................... 6

sACN Connection........................................................................................................... 6

Signal Connection Diagrams.......................................................................................... 7

Input Connections Diagram ..................................................................................... 7

4. Operation .................................................................................... 8

Control Panel Operation................................................................................ 8

Control Knob .................................................................................................................. 8

Programming................................................................................................. 8

Menu Map ..................................................................................................... 8

Operating Settings Configuration.................................................................. 12

Home Screen ................................................................................................................. 12

Primary Home Screen ............................................................................................. 12

Secondary Home Screen ........................................................................................ 13

Custom Device Name .................................................................................................... 14

Set IP Mode ................................................................................................................... 14

Static IP ................................................................................................................... 14

Manual IP ................................................................................................................ 14

Set Netmask................................................................................................................... 14

Operating Mode ............................................................................................................. 14

NetWork Timeout ........................................................................................................... 15

On Source Loss ............................................................................................................. 15

Set DMX Port ................................................................................................................. 15

Disp Type ................................................................................................................ 15

DMX Status ............................................................................................................. 15

DMX Mode............................................................................................................... 16

Protocol ................................................................................................................... 16

Framerte/fs .............................................................................................................. 16

Network ................................................................................................................... 16

1st Universe............................................................................................................. 17

LCD Backlight ................................................................................................................ 17

User Preset .................................................................................................................... 17

Net-X II User Manual Rev. 8

ii

Factory Reset................................................................................................................. 18

Record Scenes............................................................................................................... 18

Scene Name............................................................................................................ 18

Scene Steps ............................................................................................................ 18

Add Step.................................................................................................................. 18

Delete Step.............................................................................................................. 18

Timing...................................................................................................................... 18

Trigger Settings.............................................................................................................. 19

Trigger Setting Diagram .......................................................................................... 19

Backup ........................................................................................................................... 19

Firmware Version ........................................................................................................... 19

Exit ................................................................................................................................. 19

Web Server ................................................................................................... 20

Web Server Overview .................................................................................................... 21

DMX Port Overview - Input Status ................................................................................. 21

DMX Port Overview - Output Status .............................................................................. 21

Firmware Update/Backup............................................................................................... 21

5. Technical Information................................................................ 22

Product Maintenance .................................................................................... 22

6. Technical Specifications ........................................................... 23

7. Returns........................................................................................ 24

8. Contact Us .................................................................................. 25

1. Antes de empezar....................................................................... 27

Qué va incluido ............................................................................................. 27

Reclamaciones.............................................................................................. 27

Convenciones del Manual............................................................................. 27

Símbolos ....................................................................................................... 27

Notas de Seguridad ...................................................................................... 28

2. Introducción................................................................................ 29

Descripción ................................................................................................... 29

Caracteristicas .............................................................................................. 29

Vista general del panel frontal........................................................................................ 29

Vista general del panel posterior.................................................................................... 29

Dimensiones del Producto ............................................................................ 30

3. Instalación................................................................................... 31

Corriente alterna ........................................................................................... 31

Sustitución del Fusible .................................................................................. 31

Montaje ......................................................................................................... 31

Orientación.................................................................................................... 31

Diagrama de Montaje del Producto............................................................... 32

Pauta de Instalación...................................................................................... 32

Conexiones de señal..................................................................................... 32

Conexión Art-Net™ ........................................................................................................ 32

Conexión sACN.............................................................................................................. 33

Diagramas de conexiones.............................................................................................. 33

Diagrama de conexiones de entrada....................................................................... 33

Diagrama de conexiones de salida ......................................................................... 33

4. Funcionamiento.......................................................................... 34

Funcionamiento del Panel de Control........................................................... 34

Mando de control ........................................................................................................... 34

Programación................................................................................................ 34

Mapa de Menú .............................................................................................. 35

Net-X II User Manual Rev. 8

iii

Configuración de Ajustes de Funcionamiento............................................... 38

Pantalla de inicio............................................................................................................ 38

Pantalla de inicio principal

............................................................................................. 38

Pantalla de inicio secundaria................................................................................... 39

Nombre de dispositivo personalizado ............................................................................ 40

Dirección IP.................................................................................................................... 40

Static IP ................................................................................................................... 40

Manual IP ................................................................................................................ 40

Configurar la mascara de red......................................................................................... 40

Modo de operación ........................................................................................................ 40

Tiempo de espera de red............................................................................................... 41

En la pérdida de origen.................................................................................................. 41

Configuración del puerto DMX ....................................................................................... 41

Tipo de visualización ............................................................................................... 41

Estado DMX ............................................................................................................ 41

Modo DMX............................................................................................................... 42

Protocolo ................................................................................................................. 42

Framerte/fs .............................................................................................................. 42

Red .......................................................................................................................... 42

1st Universo............................................................................................................. 43

Retro-iluminación de la pantalla..................................................................................... 43

Presets de usuario ......................................................................................................... 43

Restablece de fábrica .................................................................................................... 43

Grabar escenas.............................................................................................................. 44

Nombre de la escena .............................................................................................. 44

Pasos de la escena ................................................................................................. 44

Añadir paso ............................................................................................................. 44

Borrar paso.............................................................................................................. 44

Tiempos................................................................................................................... 44

Configuración del disparador ......................................................................................... 45

Diagrama de ajuste del disparador.......................................................................... 45

Copia de seguridad........................................................................................................ 45

Versión de firmware ....................................................................................................... 45

Salida ............................................................................................................................. 45

Servidor Web ................................................................................................ 46

Descripción general del servidor Web ........................................................................... 47

Descripción del puerto DMX - Puerto de entrada .......................................................... 47

Descripción del puerto DMX - Puerto de salida ............................................................. 47

Copia de seguridad / actualización del firmware............................................................ 47

5. Información Técnica .................................................................. 48

Mantenimiento............................................................................................... 48

6. Especificaciones Técnicas........................................................ 49

7. Devoluciones.............................................................................. 50

8. Contacto...................................................................................... 51

1. Avant De Commencer................................................................ 53

Contenu......................................................................................................... 53

Réclamations ................................................................................................ 53

Conventions Manuelles................................................................................. 53

Symboles ...................................................................................................... 53

Consignes de Sécurité.................................................................................. 54

2. Introduction ................................................................................ 55

Description .................................................................................................... 55

Caractéristiques ............................................................................................ 55

Net-X II User Manual Rev. 8

iv

Vue d'ensemble de l'appareil ........................................................................ 55

Dimensions de l'appareil ............................................................................... 56

3. Configuration.............................................................................. 57

Alimentation CA ............................................................................................ 57

Remplacement des Fusibles......................................................................... 57

Fixation.......................................................................................................... 57

Orientation..................................................................................................... 57

Schéma de Montage..................................................................................... 58

Instructions pour I’Installation........................................................................ 58

Connections du Signal .................................................................................. 58

Connexion Art-Net™ ...................................................................................................... 58

Connexion sACN............................................................................................................ 58

Schémas de connexions................................................................................................ 59

Schéma des connexions en entrée ......................................................................... 59

Schéma des connexions en sortie........................................................................... 59

4. Fonctionnement ......................................................................... 60

Utilisation du Panneau de Commande.......................................................... 60

Bouton de controle......................................................................................................... 60

Programmation.............................................................................................. 60

Plan du Menu................................................................................................ 60

Configuration des Paramètres de Fonctionnement....................................... 63

Écran d'accueil............................................................................................................... 63

Écran d'accueil principal .......................................................................................... 63

Écran d'accueil secondaire...................................................................................... 64

Nom personnalisé du périphérique ................................................................................ 65

Sélection du mode IP ..................................................................................................... 65

Statique IP ............................................................................................................... 65

Manuel IP ................................................................................................................ 65

Configuration du masque réseau ................................................................................... 65

Mode de fonctionnement................................................................................................ 65

Délai d'expiration du réseau........................................................................................... 66

Perte de source.............................................................................................................. 66

Paramètres de port DMX ............................................................................................... 66

Type d'affichage ...................................................................................................... 66

Statut DMX .............................................................................................................. 66

Mode DMX............................................................................................................... 67

Protocole ................................................................................................................. 67

Framerte/fs .............................................................................................................. 67

Réseau .................................................................................................................... 67

1st Univers............................................................................................................... 68

Rétro-éclairage de l'écran .............................................................................................. 68

Préréglages utilisateur ................................................................................................... 68

Réinitialisation d'usine.................................................................................................... 68

Enregistrement des scènes............................................................................................ 69

Nom de la scène...................................................................................................... 69

Étapes de scène...................................................................................................... 69

Ajout d'une étape..................................................................................................... 69

Suppression d'une scène ........................................................................................ 69

Cadencement .......................................................................................................... 69

Paramètres de déclenchement ...................................................................................... 70

Diagramme des paramètres de déclenchement...................................................... 70

Sauvegarde.................................................................................................................... 70

Mise à jour du microprogramme .................................................................................... 70

Annuler........................................................................................................................... 70

Net-X II User Manual Rev. 8

v

Serveur Web ................................................................................................. 71

5. Informations Techniques........................................................... 72

Entretien de l'Appareil ................................................................................... 72

6. Spécificités Techniques ............................................................ 73

7. Renvois ....................................................................................... 74

8. Nous Contacter........................................................................... 75

1. Voordat tu begint........................................................................ 77

Wat is er inbegrepen..................................................................................... 77

Claims ........................................................................................................... 77

Conventies van deze handleiding ................................................................. 77

Symbolen ...................................................................................................... 77

Veiligheidsinstructies..................................................................................... 78

2. Inleiding....................................................................................... 79

Beschrijving................................................................................................... 79

Eigenschaften ............................................................................................... 79

Afmetingen van het product .......................................................................... 80

3. Instelling...................................................................................... 81

AC-stroom..................................................................................................... 81

Vervangen van de zekering .......................................................................... 81

Montage ........................................................................................................ 81

Oriëntering .................................................................................................... 81

Montage Diagram.......................................................................................... 81

Signaalverbindingen...................................................................................... 82

Art-Net™-aansluiting...................................................................................................... 82

sACN-aansluiting ........................................................................................................... 82

Aansluitingsdiagrammen................................................................................................ 82

Diagram met ingangsaansluitingen ......................................................................... 82

Diagram met uitgangsaansluitingen ........................................................................ 83

4. Werking ....................................................................................... 84

Werking van het bedieningspaneel............................................................... 84

Programmeren .............................................................................................. 84

Menukaarte ................................................................................................... 85

Configuratie gebruiksinstellingen .................................................................. 87

Startscherm.................................................................................................................... 87

Primaire Startscherm............................................................................................... 88

Secundair Startscherm ............................................................................................ 88

Aangepaste apparaatnaam............................................................................................ 89

Statische IP-modus ........................................................................................................ 89

Statische IP ............................................................................................................. 89

Handmatige IP......................................................................................................... 89

Netmask instellen........................................................................................................... 89

Bedrijfsmodus ................................................................................................................ 89

Netwerktime-out ............................................................................................................. 90

Over bronverlies............................................................................................................. 90

DMX-poortinstellingen.................................................................................................... 90

Weergavetype ......................................................................................................... 90

Status van DMX....................................................................................................... 90

DMX-modus............................................................................................................. 91

Protocol ................................................................................................................... 91

Framerte/fs .............................................................................................................. 91

Netwerk ................................................................................................................... 91

Net-X II User Manual Rev. 8

vi

1st Universe............................................................................................................. 92

Beeldscherm LCD.......................................................................................................... 92

Selecteer gebruikersvoorkeuren .................................................................................... 92

Fabrieksinstellingen reset .............................................................................................. 92

Scènes opnemen ........................................................................................................... 92

Scènenaam ............................................................................................................. 93

Scènestappen.......................................................................................................... 93

Stap toevoegen ....................................................................................................... 93

Stap verwijderen...................................................................................................... 93

Timing...................................................................................................................... 93

Triggerinstellingen.......................................................................................................... 94

Triggerinstellingen diagram ..................................................................................... 94

Backup ........................................................................................................................... 94

Firmwareversie............................................................................................................... 94

Annuleren....................................................................................................................... 94

Web Server ................................................................................................... 95

Overzicht Web Server.................................................................................................... 96

Overzicht DMX Poort - Ingangsstatus............................................................................ 96

Overzicht DMX Poort - Uitgangsstatus .......................................................................... 96

Firmware-update/backup ............................................................................................... 96

5. Technische Informatie ............................................................... 97

Product Onderhoud....................................................................................... 97

6. Technische Specificaties........................................................... 98

7. Retouren...................................................................................... 99

8. Neem Contact op........................................................................ 100

1

Net-X II User Manual Rev. 8

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Symbols

•Net-XII

• Seetronic

®

powerKON

®

power cord

• Phoenix connector

• User manual

CONVENTION MEANING

1–512 A range of values

50/60 A set of values of which only one can be chosen

<SET> A button on the product’s control panel

Settings A product function or a menu option

SYMBOL MEANING

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

2

Before You Begin

Net-X II User Manual Rev. 8

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Do not touch the product’s housing when operating because it may be very hot.

Mounting

• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to

rain or moisture. (IP20)

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to

warm humid ballroom) condensation may form on the internal electronics of the product. To avoid

causing a failure, allow product to fully acclimate to the surrounding environment before connecting

it to power.

• Make sure there are no flammable materials close to this product while it is operating.

• Never carry the product by the power cord.

Power and Wiring

• Make sure the power cord is not crimped or damaged.

• Always make sure you are connecting this product to the proper voltage in accordance with the

specifications in this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Never disconnect this product by pulling or tugging on the power cable.

Operation

• Do not operate this product if there is damage on the housing or cables. Have the damaged parts

replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

• In the event of a serious operation problem, stop using this product immediately!

This product contains no user-serviceable parts. Any reference to servicing in

this User Manual will only apply to properly trained, certified technicians. Do not

open the housing or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this

product.

If your Chauvet product requires service, contact Chauvet Technical Support.

3

Net-X II User Manual Rev. 8

Introduction

2. Introduction

Description

Net-X II is a reliable and versatile rack-mountable ethernet-to-DMX adapter with an integrated optical DMX

splitter and Ethernet switch capability. It has two 5-pin DMX In ports and eight 5-pin DMX Output/input

ports, all optically isolated. It takes up to 8 Art-Net™ or sACN universes simultaneously. The eight 5-pin

DMX Out ports can be assigned to either of the DMX In ports or to one of the Art-Net™ or sACN universes.

Seetronic

®

etherKON

®

ports are through ports that allow daisy chaining of Net-X II units. Net-X II provides

a reliable, highly customizable network infrastructure for complex control systems. Merge two controllers

into the Net-X II via DMX, Art-Net™, or sACN, supporting both LTP (Latest Takes Precedence) and HTP

(Highest Takes Precedence) functions. Record function allows you to record looks from a controller and

save them into memory and it is Web server supported for remote configuration and backup/update.

Features

• 5-pin DMX splitter/distributor

• Art-Net™/sACN to DMX converter, up to 8 universes

• DMX to Art-Net™/sACN converter, up to 8 universes

• Merge two 5-pin DMX universes into a single universe, or merge two NET controllers (Art-Net™ or

sACN) into the same universe, then convert to standard 5-pin DMX for the outputs

• HTP (Highest Takes Precedence) and LTP (Latest Takes Precedence) merge functions supported

• Backup settings and configurations with same or other Net-X IIs

• Web server supported for remote configuration and backup/update

• Integrated Record function allows you to record looks from a controller and save them into memory

(10 shows in memory, 100 steps each) to trigger up to 4 shows/zones simultaneously using the 5-

wire Phoenix cold contacts on the rear of the unit

• Supports RDM over Art-Net™ for remote fixture management

Product Overview

Phoenix connector for

remote triggers (4)

Seetronic

®

etherKON

®

through ports

DMX output/

input

(assignable)

Control panel

display

LED

indicators

DMX in

Fuse holder

Seetronic

®

powerKON

®

in

Knob

LED indicators

Power Switch

4

Introduction

Net-X II User Manual Rev. 8

Product Dimensions

1.73 in

44 mm

6.20 in

157.5mm

17.40 in

442 mm

19 in

483 mm

5.39 in

137mm

5

Net-X II User Manual Rev. 8

Setup

3. Setup

AC Power

Each Net-X II has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC,

50/60 Hz. To determine the power requirements for each Net-X II, refer to the label affixed to the product.

You can also refer to the Technical Specifications

chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com

.

Fuse Replacement

The Net-X II uses a F 1 A, 250 V fuse accessible from the back of the product. To change the fuse, do the

following:

1. Disconnect the product from power.

2. With a Phillips head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse.

4. Replace with a fuse of the same type and rating.

5. Screw the fuse holder cap back in place and reconnect power.

Mounting

Before mounting this product, read and follow the Safety Notes. For our Chauvet line of mounting clamps,

go to www.trusst.com/productcategory/accessories-clamps/.

Orientation

Always mount this product in a safe position. Ensure that the menu and the ports are accessible, and there

is adequate room for ventilation, configuration, and maintenance. The Net-X II fits nicely in a standard 19”

rack, can be suspended upright or upside down, or it can be placed on its rubber feet on a flat level surface.

Use the following guidelines when mounting the Net-X II:

• When selecting an installation location, consider easy access to this product for operation,

programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in the Safety Notes.

• Never mount in places where rain, high humidity, extreme temperature changes, or restricted

ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the product’s weight. See

the Technical Specifications

for the weight-bearing requirements of this product.

• When hanging this product, always secure to a fastening device using a safety cable.

• Leave enough slack on the cables to prevent tension and pull on the plugs.

• Always connect the product to a grounded and protected circuit. Make sure the

product has an appropriate electrical ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel serves only as a 0 to 100% switch.

• Disconnect the product from power before replacing the fuse.

• Always replace a blown fuse with another of the same type and rating.

6

Setup

Net-X II User Manual Rev. 8

Mounting Diagram

Installation Guidelines

The Net-X II is used as part of a control system for operating various lighting and multimedia products. The

physical and digital construction of the control network is determined by the location and signal needs of

the products.

When designing a control system that uses the Net-X II, consider the following:

• Placing the Net-X II so the menu and ports can be accessed

• Running the cables so there is no tension or pull on the cables or plugs

• Planning a large control system carefully before configuring the components, so IP address, DMX

address, and other identifiers are not duplicated.

The NET-X II supports setting the 8 output ports as inputs. Male to female gender adapters will need to be

used for the 5-pin XLR connectors for this scenario. When using this setup, it is not recommended to use

RDM in the system along with HTP/LTP signal merging. The architecture of the RDM protocol is not suited

for this scenario.

When using 2 controllers to merge signal into a fixture through the NET-X II, it is recommended to use Art-

Net Art-RDM protocol via Ethernet from both controllers feeding into the NET-X II, not DMX/RDM over a

RS-485 line feeding from the controllers.

Signal Connections

The Net-X II receives signal though 2 DMX In ports and one of two Seetronic

®

etherKON

®

ports. It sends

signal out through eight DMX out ports and the other Seetronic

®

etherKON

®

port.

Art-Net™ Connection

Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer a large amount of DMX512 data using an

etherKON

®

RJ45 connection over a large network. An Art-Net™ protocol document is available from

www.chauvetprofessional.com. Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and formatting of

Architecture for Control Networks to transport DMX512 data over IP or any other ACN compatible network.

Safety cable

Mounting clamp

Rack ears

7

Net-X II User Manual Rev. 8

Setup

Signal Connection Diagrams

Input Connections Diagram

# CONNECTIONS PURPOSE

1 DMX output/input

Receive or send DMX input/output to or from controllers or

products. Can receive DMX to be converted to Art-Net™ or sACN.

2 Ethernet input/throughput

Link to an Art-Net™ or sACN network; also used to access Web server

# CONNECTIONS PURPOSE

1 DMX in DMX ports A and B.

2 Seetronic

®

powerKON

®

in Power in

3 Phoenix connector To trigger recorded scenes

• The Seetronic

®

etherKON

®

ports are through ports. Each port can be either an

input or an output port.

• The Phoenix connector has four inputs (triggers 1–4) and a ground terminal.

12

2

3

1

Port A

Port B

8

Operation

Net-X II User Manual Rev. 8

4. Operation

Control Panel Operation

The Net-X II is configured through the control panel, using the control knob. Once the Net-X II is properly

configured it operates without user intervention.

The Net-X II can be used as a DMX splitter, in which case the DMX In ports must be assigned to the DMX

output/input ports, but the Net, Subnet, and IP address settings may not need configuration.

The Net-X II can be used as an Art-Net™ node, in which case the Art-Net™ universes must be assigned to

the DMX output/input ports, and the Net, Subnet, and IP address settings must be configured.

The Net-X II can be used as an sACN node, in which case the sACN universes must be assigned to the

DMX output/input ports, and the IP address settings must be configured.

The Net-X II can be used as both a DMX splitter and either an Art-Net™ or sACN node simultaneously, in

which case both the DMX assignments and the Art-Net™ or sACN settings must be configured.

The Net-X II can be used to merge two DMX, Art-Net™, or sACN signals from different controllers and

output as one signal, using LTP (latest takes precedence) and HTP (highest takes precedence) functions.

The Net-X II has backup settings and configurations with same or other Net-X II products.

The Net-X II is Web server supported for remote configuration and backup/update.

The Net-X II’s record function allows you to record looks from a controller and save them into memory.

These can be deployed via the Phoenix triggers.

Control Knob

The Net-X II has a knob that is used to scroll through the options in the menu. Press the knob to make a selection.

Programming

Refer to the Menu Map to understand the menu options. The menu map shows the main level and a

variable number of programming levels for each option.

• To access the menu from the Home Screen, press the knob.

• To scroll through the options on each level of the menu, turn the knob. Turn it clockwise to scroll

down, and turn it counter-clockwise to scroll up.

• Press the knob to select the highlighted option. This will take you to the next programming level for

that option, or it will highlight a value that can be edited.

• To increase a selected number value, turn the knob clockwise. To decrease a selected number

value, turn the knob counter-clockwise.

• Press Exit/Cancel to the previous main level.

• Press the knob for 3 seconds to return to the Home Screen.

Menu Map

Refer to the Net-X II product page on www.chauvetprofessional.com for the latest menu map.

MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION

1. Custom

Device Name

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Cancel

Inputs a custom device name

Enter

2. Set IP

Mode

1. Static IP _ _ _ _ _ _ _ _ _ _

Default address-cannot be

changed

2. Manual IP _ _ _ _ _ _ _ _ _

Cancel

Sets the IP Addresses

Enter

3. Exit Exits to previous screen

3. Set

Netmask

A. 255.000.000.000 Sets Netmask A

B. 255.255.000.000 Sets Netmask B

C. 255.255.255.000 Sets Netmask C

Exit Exits to previous screen

9

Net-X II User Manual Rev. 8

Operation

4. Operating

Mode

1. 8 Port

Assigns each port as an output/

input (this also supports RDM over

Ethernet)

2. 2 + 8 Port

Supports DMX merging with the

two DMX inputs (disables RDM

function)

3. Exit Exits to previous screen

5. NetWork

Timeout

1. Disabled Disables the timeout feature

2. 1 Seconds

1 second time delay to stop

receiving commands from a

console connected to the network

3. 2 Seconds

2 seconds time delay to stop

receiving commands from a

console connected to the network

4. 5 Seconds

5 seconds time delay to stop

receiving commands from a

console connected to the network

5. Exit Exits to the previous screen

6. On Source

Loss

1. Hold output

Holds the last value received

before the source console/

controller stops sending signal

2. Blackout

Sets all DMX channels to a value

of 000

3. Stop DMX Disables the port

4. Exit Exits to previous screen

MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION

10

Operation

Net-X II User Manual Rev. 8

7. Set DMX

Port

DMX Ports 1–8 /

DMX Input A–B

(Inputs A and B

only when

Operating Mode

is set to

2 + 8 Port)

1. Disp Type

HEX Hexadecimal values

DEC Decimal values

2. DMX Status

OUTPUT Sets the port as output

INPUT

Sets the port to receive DMX from

a controller that can be routed to

another DMX port

DISABLE Disables the output port

3. DMX Mode

SINGLE

(OUTPUT

Status only)

Disables Ethernet signal merging

LTP

(OUTPUT

Status only)

Sets Ethernet signal merging to

Latest Takes Precedence

HTP

(OUTPUT

Status only)

Sets Ethernet signal merging to

Highest Takes Precendence

NORMAL

(INPUT Status

only)

Sets input ports acting as a primary

controller

BACKUP

(INPUT Status

only)

Sets input ports acting as a backup

controller

4. Protocol

ArtNet

Sets the output/input source for the

DMX port to Art-Net™

sACN

Sets the output/input source for the

DMX port to sACN

5. Framerte/fs 010–040 Sets rate of speed for output ports

6. Network

00H–7FH (Hex)

000–128 (Dec)

Sets the net settings

7. 1st Universe

00H–FFH (Hex)

000–256 (Dec)

Sets the primary input/output

universe

8. Exit (Option 8 for Input Status or

Output Status in Single Mode)

Exits to the previous screen

8. LCD

Backlight

1. On Backlight on

2. 10 Seconds Display turns off after 10 seconds

3. 30 Seconds Display turns off after 30 seconds

4. Exit Exits to the previous screen

9. User

Preset

1. Art-net 8-port DMX

Sets all 8 ports to receive 8

universes of Art-Net™ from 0–7

2. sACN to 8-port DMX

Sets all 8 ports to receive 8

universes of sACN from 1–8

3. 1x8 DMX Splitter

Sets the product to operate as a

DMX splitter with all 8 outputs

receiving DMX from input A

4. 2x4 DMX Splitter

Sets

1–4

outputs to

input-port A

and the

5–8

outputs to

input-port B

5. Exit Exits to previous screen

10. Factory

Reset

NO

Resets to factory settings

YES

MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION

11

Net-X II User Manual Rev. 8

Operation

11. Record

Scenes

<1–10>

1. Name Scene _ _ _ _ _ _ _ _ _

Cancel

Customize scene name

Enter

2. Step: (0/0) 000–100

Scroll to the step that you prefer to

edit

3. Add Step

Adds steps to scene and takes a

snapshot of all 8 ports and records

step to memory

4. Delete Step

NO

Delete current step from scene

YES

5. Timing

1. Save Step Saves timing for the selected step

2. Fade In

Time

0.10S–9M59S Selects fade in time

3. Fade

Out Time

0.10S–9M59S Selects fade out time

4. Delay

Time

0.10S–9M59S Selects delay time

5. Exit Exits to previous screen

6. Exit Exits to previous screen

12. Trigger

Settings

1. Trigger 1 Scene 1–10

Assigns trigger 1 to one of the

10 scenes

2. Trigger 2 Scene 1–10

Assigns trigger 2 to one of the

10 scenes

3. Trigger 3 Scene 1–10

Assigns trigger 3 to one of the

10 scenes

4. Trigger 4 Scene 1–10

Assigns trigger 4 to one of the

10 scenes

5. Exit Exits to previous screen

13. Backup

1. Save Preset 1–10

Saves and loads configurations

2. Load Preset 1–10

3. Exit Exits to previous screen

14. Firmware

Version

__ _ __ _ Displays firmware version

15. Exit Exit Exits to main screen

MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION

12

Operation

Net-X II User Manual Rev. 8

Operating Settings Configuration

Home Screen

The Net-X II has 2 home screens which display the current status of all ports. The home screen is

displayed when the menu is not being accessed.

To access the menu from the home screen, press the knob. To return to the home screen from the menu,

select 13. Exit and press the knob, or press & hold the control knob for 3 seconds (this can be done from

any position in the Menu map)

Primary Home Screen

# SYMBOL DESCRIPTION

1

A–B Ethernet in/through ports

- or x

(EtherNET ports status)

x is connected

- is disconnected

P1–4 Ports 1–4 universe label

P5–8 Ports 5–8 universe label

2

1–8 5-pin female port number label (1–8)

 or x

(ports 1–8 signal sensor)

 is detecting a signal

x is no signal detected

Art, ACN, or DMX

(Art-Net™, sACN, or DMX)

Defines output or input port protocol for outputs 1–4

Art, ACN, or DMX

(Art-Net™, sACN, or DMX)

Defines output or input port protocol for outputs 5–8

3 IP: Displays the device IP address

1

3

2

La page charge ...

Chauvet NET-X II Manuel utilisateur

Ce manuel convient également à

Chauvet NET-X II Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents