Chauvet Net-X Manuel utilisateur

Chauvet
Marque
Chauvet
Modèle
Net-X
Catégorie
Stroboscopes
Taper
Manuel utilisateur

Ce manuel convient également à

User Manual
Version: V2.3
Net-X II User Manual Rev. 8
Edition Notes
The Net-X II User Manual includes a description, safety precautions, installation, programming, operation,
and maintenance instructions for the Net-X II as of the release date of this edition.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration
.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty-registration
.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal
use, for the period specified in, and subject to the exclusions and limitations set forth in the full limited
warranty on our website. This warranty extends only to the original purchaser of the product and is not
transferable. To exercise rights under this warranty, you must provide proof of purchase in the form of an
original sales receipt from an authorized dealer that shows the product name and date of purchase. THERE
ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal rights. You
may also have other rights that vary from state to state and country to country. This warranty is valid only in
the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany, and Mexico. For warranty terms in other countries, please consult your local distributor.
Trademarks
CHAUVET, the Chauvet logo, and Net-X II are registered trademarks or trademarks of Chauvet & Sons,
LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and
product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, texts, and
images are owned by Chauvet.
© Copyright 2021 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes
only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this
manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4
paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide
that shipped with the product, as well as this manual, before installing, operating, or maintaining this
product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetprofessional.com
.
Document Revision
This Net-X II User Manual is the 8th edition of this document. Go to www.chauvetprofessional.com for the
latest version.
Net-X II User Manual Rev. 8
i
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Claims ........................................................................................................... 1
Manual Conventions ..................................................................................... 1
Symbols ........................................................................................................ 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Description .................................................................................................... 3
Features........................................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
Fuse Replacement........................................................................................ 5
Mounting ....................................................................................................... 5
Orientation..................................................................................................... 5
Mounting Diagram......................................................................................... 6
Installation Guidelines................................................................................... 6
Signal Connections ....................................................................................... 6
Art-Net™ Connection ..................................................................................................... 6
sACN Connection........................................................................................................... 6
Signal Connection Diagrams.......................................................................................... 7
Input Connections Diagram ..................................................................................... 7
4. Operation .................................................................................... 8
Control Panel Operation................................................................................ 8
Control Knob .................................................................................................................. 8
Programming................................................................................................. 8
Menu Map ..................................................................................................... 8
Operating Settings Configuration.................................................................. 12
Home Screen ................................................................................................................. 12
Primary Home Screen ............................................................................................. 12
Secondary Home Screen ........................................................................................ 13
Custom Device Name .................................................................................................... 14
Set IP Mode ................................................................................................................... 14
Static IP ................................................................................................................... 14
Manual IP ................................................................................................................ 14
Set Netmask................................................................................................................... 14
Operating Mode ............................................................................................................. 14
NetWork Timeout ........................................................................................................... 15
On Source Loss ............................................................................................................. 15
Set DMX Port ................................................................................................................. 15
Disp Type ................................................................................................................ 15
DMX Status ............................................................................................................. 15
DMX Mode............................................................................................................... 16
Protocol ................................................................................................................... 16
Framerte/fs .............................................................................................................. 16
Network ................................................................................................................... 16
1st Universe............................................................................................................. 17
LCD Backlight ................................................................................................................ 17
User Preset .................................................................................................................... 17
Net-X II User Manual Rev. 8
ii
Factory Reset................................................................................................................. 18
Record Scenes............................................................................................................... 18
Scene Name............................................................................................................ 18
Scene Steps ............................................................................................................ 18
Add Step.................................................................................................................. 18
Delete Step.............................................................................................................. 18
Timing...................................................................................................................... 18
Trigger Settings.............................................................................................................. 19
Trigger Setting Diagram .......................................................................................... 19
Backup ........................................................................................................................... 19
Firmware Version ........................................................................................................... 19
Exit ................................................................................................................................. 19
Web Server ................................................................................................... 20
Web Server Overview .................................................................................................... 21
DMX Port Overview - Input Status ................................................................................. 21
DMX Port Overview - Output Status .............................................................................. 21
Firmware Update/Backup............................................................................................... 21
5. Technical Information................................................................ 22
Product Maintenance .................................................................................... 22
6. Technical Specifications ........................................................... 23
7. Returns........................................................................................ 24
8. Contact Us .................................................................................. 25
1. Antes de empezar....................................................................... 27
Qué va incluido ............................................................................................. 27
Reclamaciones.............................................................................................. 27
Convenciones del Manual............................................................................. 27
Símbolos ....................................................................................................... 27
Notas de Seguridad ...................................................................................... 28
2. Introducción................................................................................ 29
Descripción ................................................................................................... 29
Caracteristicas .............................................................................................. 29
Vista general del panel frontal........................................................................................ 29
Vista general del panel posterior.................................................................................... 29
Dimensiones del Producto ............................................................................ 30
3. Instalación................................................................................... 31
Corriente alterna ........................................................................................... 31
Sustitución del Fusible .................................................................................. 31
Montaje ......................................................................................................... 31
Orientación.................................................................................................... 31
Diagrama de Montaje del Producto............................................................... 32
Pauta de Instalación...................................................................................... 32
Conexiones de señal..................................................................................... 32
Conexión Art-Net™ ........................................................................................................ 32
Conexión sACN.............................................................................................................. 33
Diagramas de conexiones.............................................................................................. 33
Diagrama de conexiones de entrada....................................................................... 33
Diagrama de conexiones de salida ......................................................................... 33
4. Funcionamiento.......................................................................... 34
Funcionamiento del Panel de Control........................................................... 34
Mando de control ........................................................................................................... 34
Programación................................................................................................ 34
Mapa de Menú .............................................................................................. 35
Net-X II User Manual Rev. 8
iii
Configuración de Ajustes de Funcionamiento............................................... 38
Pantalla de inicio............................................................................................................ 38
Pantalla de inicio principal
............................................................................................. 38
Pantalla de inicio secundaria................................................................................... 39
Nombre de dispositivo personalizado ............................................................................ 40
Dirección IP.................................................................................................................... 40
Static IP ................................................................................................................... 40
Manual IP ................................................................................................................ 40
Configurar la mascara de red......................................................................................... 40
Modo de operación ........................................................................................................ 40
Tiempo de espera de red............................................................................................... 41
En la pérdida de origen.................................................................................................. 41
Configuración del puerto DMX ....................................................................................... 41
Tipo de visualización ............................................................................................... 41
Estado DMX ............................................................................................................ 41
Modo DMX............................................................................................................... 42
Protocolo ................................................................................................................. 42
Framerte/fs .............................................................................................................. 42
Red .......................................................................................................................... 42
1st Universo............................................................................................................. 43
Retro-iluminación de la pantalla..................................................................................... 43
Presets de usuario ......................................................................................................... 43
Restablece de fábrica .................................................................................................... 43
Grabar escenas.............................................................................................................. 44
Nombre de la escena .............................................................................................. 44
Pasos de la escena ................................................................................................. 44
Añadir paso ............................................................................................................. 44
Borrar paso.............................................................................................................. 44
Tiempos................................................................................................................... 44
Configuración del disparador ......................................................................................... 45
Diagrama de ajuste del disparador.......................................................................... 45
Copia de seguridad........................................................................................................ 45
Versión de firmware ....................................................................................................... 45
Salida ............................................................................................................................. 45
Servidor Web ................................................................................................ 46
Descripción general del servidor Web ........................................................................... 47
Descripción del puerto DMX - Puerto de entrada .......................................................... 47
Descripción del puerto DMX - Puerto de salida ............................................................. 47
Copia de seguridad / actualización del firmware............................................................ 47
5. Información Técnica .................................................................. 48
Mantenimiento............................................................................................... 48
6. Especificaciones Técnicas........................................................ 49
7. Devoluciones.............................................................................. 50
8. Contacto...................................................................................... 51
1. Avant De Commencer................................................................ 53
Contenu......................................................................................................... 53
Réclamations ................................................................................................ 53
Conventions Manuelles................................................................................. 53
Symboles ...................................................................................................... 53
Consignes de Sécurité.................................................................................. 54
2. Introduction ................................................................................ 55
Description .................................................................................................... 55
Caractéristiques ............................................................................................ 55
Net-X II User Manual Rev. 8
iv
Vue d'ensemble de l'appareil ........................................................................ 55
Dimensions de l'appareil ............................................................................... 56
3. Configuration.............................................................................. 57
Alimentation CA ............................................................................................ 57
Remplacement des Fusibles......................................................................... 57
Fixation.......................................................................................................... 57
Orientation..................................................................................................... 57
Schéma de Montage..................................................................................... 58
Instructions pour I’Installation........................................................................ 58
Connections du Signal .................................................................................. 58
Connexion Art-Net™ ...................................................................................................... 58
Connexion sACN............................................................................................................ 58
Schémas de connexions................................................................................................ 59
Schéma des connexions en entrée ......................................................................... 59
Schéma des connexions en sortie........................................................................... 59
4. Fonctionnement ......................................................................... 60
Utilisation du Panneau de Commande.......................................................... 60
Bouton de controle......................................................................................................... 60
Programmation.............................................................................................. 60
Plan du Menu................................................................................................ 60
Configuration des Paramètres de Fonctionnement....................................... 63
Écran d'accueil............................................................................................................... 63
Écran d'accueil principal .......................................................................................... 63
Écran d'accueil secondaire...................................................................................... 64
Nom personnalisé du périphérique ................................................................................ 65
Sélection du mode IP ..................................................................................................... 65
Statique IP ............................................................................................................... 65
Manuel IP ................................................................................................................ 65
Configuration du masque réseau ................................................................................... 65
Mode de fonctionnement................................................................................................ 65
Délai d'expiration du réseau........................................................................................... 66
Perte de source.............................................................................................................. 66
Paramètres de port DMX ............................................................................................... 66
Type d'affichage ...................................................................................................... 66
Statut DMX .............................................................................................................. 66
Mode DMX............................................................................................................... 67
Protocole ................................................................................................................. 67
Framerte/fs .............................................................................................................. 67
Réseau .................................................................................................................... 67
1st Univers............................................................................................................... 68
Rétro-éclairage de l'écran .............................................................................................. 68
Préréglages utilisateur ................................................................................................... 68
Réinitialisation d'usine.................................................................................................... 68
Enregistrement des scènes............................................................................................ 69
Nom de la scène...................................................................................................... 69
Étapes de scène...................................................................................................... 69
Ajout d'une étape..................................................................................................... 69
Suppression d'une scène ........................................................................................ 69
Cadencement .......................................................................................................... 69
Paramètres de déclenchement ...................................................................................... 70
Diagramme des paramètres de déclenchement...................................................... 70
Sauvegarde.................................................................................................................... 70
Mise à jour du microprogramme .................................................................................... 70
Annuler........................................................................................................................... 70
Net-X II User Manual Rev. 8
v
Serveur Web ................................................................................................. 71
5. Informations Techniques........................................................... 72
Entretien de l'Appareil ................................................................................... 72
6. Spécificités Techniques ............................................................ 73
7. Renvois ....................................................................................... 74
8. Nous Contacter........................................................................... 75
1. Voordat tu begint........................................................................ 77
Wat is er inbegrepen..................................................................................... 77
Claims ........................................................................................................... 77
Conventies van deze handleiding ................................................................. 77
Symbolen ...................................................................................................... 77
Veiligheidsinstructies..................................................................................... 78
2. Inleiding....................................................................................... 79
Beschrijving................................................................................................... 79
Eigenschaften ............................................................................................... 79
Afmetingen van het product .......................................................................... 80
3. Instelling...................................................................................... 81
AC-stroom..................................................................................................... 81
Vervangen van de zekering .......................................................................... 81
Montage ........................................................................................................ 81
Oriëntering .................................................................................................... 81
Montage Diagram.......................................................................................... 81
Signaalverbindingen...................................................................................... 82
Art-Net™-aansluiting...................................................................................................... 82
sACN-aansluiting ........................................................................................................... 82
Aansluitingsdiagrammen................................................................................................ 82
Diagram met ingangsaansluitingen ......................................................................... 82
Diagram met uitgangsaansluitingen ........................................................................ 83
4. Werking ....................................................................................... 84
Werking van het bedieningspaneel............................................................... 84
Programmeren .............................................................................................. 84
Menukaarte ................................................................................................... 85
Configuratie gebruiksinstellingen .................................................................. 87
Startscherm.................................................................................................................... 87
Primaire Startscherm............................................................................................... 88
Secundair Startscherm ............................................................................................ 88
Aangepaste apparaatnaam............................................................................................ 89
Statische IP-modus ........................................................................................................ 89
Statische IP ............................................................................................................. 89
Handmatige IP......................................................................................................... 89
Netmask instellen........................................................................................................... 89
Bedrijfsmodus ................................................................................................................ 89
Netwerktime-out ............................................................................................................. 90
Over bronverlies............................................................................................................. 90
DMX-poortinstellingen.................................................................................................... 90
Weergavetype ......................................................................................................... 90
Status van DMX....................................................................................................... 90
DMX-modus............................................................................................................. 91
Protocol ................................................................................................................... 91
Framerte/fs .............................................................................................................. 91
Netwerk ................................................................................................................... 91
Net-X II User Manual Rev. 8
vi
1st Universe............................................................................................................. 92
Beeldscherm LCD.......................................................................................................... 92
Selecteer gebruikersvoorkeuren .................................................................................... 92
Fabrieksinstellingen reset .............................................................................................. 92
Scènes opnemen ........................................................................................................... 92
Scènenaam ............................................................................................................. 93
Scènestappen.......................................................................................................... 93
Stap toevoegen ....................................................................................................... 93
Stap verwijderen...................................................................................................... 93
Timing...................................................................................................................... 93
Triggerinstellingen.......................................................................................................... 94
Triggerinstellingen diagram ..................................................................................... 94
Backup ........................................................................................................................... 94
Firmwareversie............................................................................................................... 94
Annuleren....................................................................................................................... 94
Web Server ................................................................................................... 95
Overzicht Web Server.................................................................................................... 96
Overzicht DMX Poort - Ingangsstatus............................................................................ 96
Overzicht DMX Poort - Uitgangsstatus .......................................................................... 96
Firmware-update/backup ............................................................................................... 96
5. Technische Informatie ............................................................... 97
Product Onderhoud....................................................................................... 97
6. Technische Specificaties........................................................... 98
7. Retouren...................................................................................... 99
8. Neem Contact op........................................................................ 100
1
Net-X II User Manual Rev. 8
Before You Begin
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Manual Conventions
Symbols
•Net-XII
• Seetronic
®
powerKON
®
power cord
• Phoenix connector
• User manual
CONVENTION MEANING
1–512 A range of values
50/60 A set of values of which only one can be chosen
<SET> A button on the product’s control panel
Settings A product function or a menu option
SYMBOL MEANING
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
2
Before You Begin
Net-X II User Manual Rev. 8
Safety Notes
Read all the following safety notes before working with this product. These notes contain important
information about the installation, usage, and maintenance of this product.
Personal Safety
• Avoid direct eye exposure to the light source while the product is on.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Do not touch the product’s housing when operating because it may be very hot.
Mounting
• This product is for indoor use only! To prevent risk of fire or shock, do not expose this product to
rain or moisture. (IP20)
• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
• Make sure there are no flammable materials close to this product while it is operating.
• Never carry the product by the power cord.
Power and Wiring
• Make sure the power cord is not crimped or damaged.
• Always make sure you are connecting this product to the proper voltage in accordance with the
specifications in this manual or on the product’s specification label.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
• Never connect this product to a dimmer pack or rheostat.
• Never disconnect this product by pulling or tugging on the power cable.
Operation
• Do not operate this product if there is damage on the housing or cables. Have the damaged parts
replaced by an authorized technician at once.
• Do not cover the ventilation slots when operating to avoid internal overheating.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.
• In the event of a serious operation problem, stop using this product immediately!
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual will only apply to properly trained, certified technicians. Do not
open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this
product.
If your Chauvet product requires service, contact Chauvet Technical Support.
3
Net-X II User Manual Rev. 8
Introduction
2. Introduction
Description
Net-X II is a reliable and versatile rack-mountable ethernet-to-DMX adapter with an integrated optical DMX
splitter and Ethernet switch capability. It has two 5-pin DMX In ports and eight 5-pin DMX Output/input
ports, all optically isolated. It takes up to 8 Art-Net™ or sACN universes simultaneously. The eight 5-pin
DMX Out ports can be assigned to either of the DMX In ports or to one of the Art-Net™ or sACN universes.
Seetronic
®
etherKON
®
ports are through ports that allow daisy chaining of Net-X II units. Net-X II provides
a reliable, highly customizable network infrastructure for complex control systems. Merge two controllers
into the Net-X II via DMX, Art-Net™, or sACN, supporting both LTP (Latest Takes Precedence) and HTP
(Highest Takes Precedence) functions. Record function allows you to record looks from a controller and
save them into memory and it is Web server supported for remote configuration and backup/update.
Features
• 5-pin DMX splitter/distributor
• Art-Net™/sACN to DMX converter, up to 8 universes
• DMX to Art-Net™/sACN converter, up to 8 universes
• Merge two 5-pin DMX universes into a single universe, or merge two NET controllers (Art-Net™ or
sACN) into the same universe, then convert to standard 5-pin DMX for the outputs
• HTP (Highest Takes Precedence) and LTP (Latest Takes Precedence) merge functions supported
• Backup settings and configurations with same or other Net-X IIs
• Web server supported for remote configuration and backup/update
• Integrated Record function allows you to record looks from a controller and save them into memory
(10 shows in memory, 100 steps each) to trigger up to 4 shows/zones simultaneously using the 5-
wire Phoenix cold contacts on the rear of the unit
• Supports RDM over Art-Net™ for remote fixture management
Product Overview
Phoenix connector for
remote triggers (4)
Seetronic
®
etherKON
®
through ports
DMX output/
input
(assignable)
Control panel
display
LED
indicators
DMX in
Fuse holder
Seetronic
®
powerKON
®
in
Knob
LED indicators
Power Switch
4
Introduction
Net-X II User Manual Rev. 8
Product Dimensions
1.73 in
44 mm
6.20 in
157.5mm
17.40 in
442 mm
19 in
483 mm
5.39 in
137mm
5
Net-X II User Manual Rev. 8
Setup
3. Setup
AC Power
Each Net-X II has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC,
50/60 Hz. To determine the power requirements for each Net-X II, refer to the label affixed to the product.
You can also refer to the Technical Specifications
chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com
.
Fuse Replacement
The Net-X II uses a F 1 A, 250 V fuse accessible from the back of the product. To change the fuse, do the
following:
1. Disconnect the product from power.
2. With a Phillips head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
Mounting
Before mounting this product, read and follow the Safety Notes. For our Chauvet line of mounting clamps,
go to www.trusst.com/productcategory/accessories-clamps/.
Orientation
Always mount this product in a safe position. Ensure that the menu and the ports are accessible, and there
is adequate room for ventilation, configuration, and maintenance. The Net-X II fits nicely in a standard 19”
rack, can be suspended upright or upside down, or it can be placed on its rubber feet on a flat level surface.
Use the following guidelines when mounting the Net-X II:
• When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or restricted
ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the product’s weight. See
the Technical Specifications
for the weight-bearing requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable.
• Leave enough slack on the cables to prevent tension and pull on the plugs.
• Always connect the product to a grounded and protected circuit. Make sure the
product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
• Disconnect the product from power before replacing the fuse.
• Always replace a blown fuse with another of the same type and rating.
6
Setup
Net-X II User Manual Rev. 8
Mounting Diagram
Installation Guidelines
The Net-X II is used as part of a control system for operating various lighting and multimedia products. The
physical and digital construction of the control network is determined by the location and signal needs of
the products.
When designing a control system that uses the Net-X II, consider the following:
• Placing the Net-X II so the menu and ports can be accessed
• Running the cables so there is no tension or pull on the cables or plugs
• Planning a large control system carefully before configuring the components, so IP address, DMX
address, and other identifiers are not duplicated.
The NET-X II supports setting the 8 output ports as inputs. Male to female gender adapters will need to be
used for the 5-pin XLR connectors for this scenario. When using this setup, it is not recommended to use
RDM in the system along with HTP/LTP signal merging. The architecture of the RDM protocol is not suited
for this scenario.
When using 2 controllers to merge signal into a fixture through the NET-X II, it is recommended to use Art-
Net Art-RDM protocol via Ethernet from both controllers feeding into the NET-X II, not DMX/RDM over a
RS-485 line feeding from the controllers.
Signal Connections
The Net-X II receives signal though 2 DMX In ports and one of two Seetronic
®
etherKON
®
ports. It sends
signal out through eight DMX out ports and the other Seetronic
®
etherKON
®
port.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP to transfer a large amount of DMX512 data using an
etherKON
®
RJ45 connection over a large network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com. Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and formatting of
Architecture for Control Networks to transport DMX512 data over IP or any other ACN compatible network.
Safety cable
Mounting clamp
Rack ears
7
Net-X II User Manual Rev. 8
Setup
Signal Connection Diagrams
Input Connections Diagram
# CONNECTIONS PURPOSE
1 DMX output/input
Receive or send DMX input/output to or from controllers or
products. Can receive DMX to be converted to Art-Net™ or sACN.
2 Ethernet input/throughput
Link to an Art-Net™ or sACN network; also used to access Web server
# CONNECTIONS PURPOSE
1 DMX in DMX ports A and B.
2 Seetronic
®
powerKON
®
in Power in
3 Phoenix connector To trigger recorded scenes
• The Seetronic
®
etherKON
®
ports are through ports. Each port can be either an
input or an output port.
• The Phoenix connector has four inputs (triggers 1–4) and a ground terminal.
12
2
3
1
Port A
Port B
8
Operation
Net-X II User Manual Rev. 8
4. Operation
Control Panel Operation
The Net-X II is configured through the control panel, using the control knob. Once the Net-X II is properly
configured it operates without user intervention.
The Net-X II can be used as a DMX splitter, in which case the DMX In ports must be assigned to the DMX
output/input ports, but the Net, Subnet, and IP address settings may not need configuration.
The Net-X II can be used as an Art-Net™ node, in which case the Art-Net™ universes must be assigned to
the DMX output/input ports, and the Net, Subnet, and IP address settings must be configured.
The Net-X II can be used as an sACN node, in which case the sACN universes must be assigned to the
DMX output/input ports, and the IP address settings must be configured.
The Net-X II can be used as both a DMX splitter and either an Art-Net™ or sACN node simultaneously, in
which case both the DMX assignments and the Art-Net™ or sACN settings must be configured.
The Net-X II can be used to merge two DMX, Art-Net™, or sACN signals from different controllers and
output as one signal, using LTP (latest takes precedence) and HTP (highest takes precedence) functions.
The Net-X II has backup settings and configurations with same or other Net-X II products.
The Net-X II is Web server supported for remote configuration and backup/update.
The Net-X II’s record function allows you to record looks from a controller and save them into memory.
These can be deployed via the Phoenix triggers.
Control Knob
The Net-X II has a knob that is used to scroll through the options in the menu. Press the knob to make a selection.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
• To access the menu from the Home Screen, press the knob.
• To scroll through the options on each level of the menu, turn the knob. Turn it clockwise to scroll
down, and turn it counter-clockwise to scroll up.
• Press the knob to select the highlighted option. This will take you to the next programming level for
that option, or it will highlight a value that can be edited.
• To increase a selected number value, turn the knob clockwise. To decrease a selected number
value, turn the knob counter-clockwise.
• Press Exit/Cancel to the previous main level.
• Press the knob for 3 seconds to return to the Home Screen.
Menu Map
Refer to the Net-X II product page on www.chauvetprofessional.com for the latest menu map.
MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION
1. Custom
Device Name
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Cancel
Inputs a custom device name
Enter
2. Set IP
Mode
1. Static IP _ _ _ _ _ _ _ _ _ _
Default address-cannot be
changed
2. Manual IP _ _ _ _ _ _ _ _ _
Cancel
Sets the IP Addresses
Enter
3. Exit Exits to previous screen
3. Set
Netmask
A. 255.000.000.000 Sets Netmask A
B. 255.255.000.000 Sets Netmask B
C. 255.255.255.000 Sets Netmask C
Exit Exits to previous screen
9
Net-X II User Manual Rev. 8
Operation
4. Operating
Mode
1. 8 Port
Assigns each port as an output/
input (this also supports RDM over
Ethernet)
2. 2 + 8 Port
Supports DMX merging with the
two DMX inputs (disables RDM
function)
3. Exit Exits to previous screen
5. NetWork
Timeout
1. Disabled Disables the timeout feature
2. 1 Seconds
1 second time delay to stop
receiving commands from a
console connected to the network
3. 2 Seconds
2 seconds time delay to stop
receiving commands from a
console connected to the network
4. 5 Seconds
5 seconds time delay to stop
receiving commands from a
console connected to the network
5. Exit Exits to the previous screen
6. On Source
Loss
1. Hold output
Holds the last value received
before the source console/
controller stops sending signal
2. Blackout
Sets all DMX channels to a value
of 000
3. Stop DMX Disables the port
4. Exit Exits to previous screen
MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION
10
Operation
Net-X II User Manual Rev. 8
7. Set DMX
Port
DMX Ports 1–8 /
DMX Input A–B
(Inputs A and B
only when
Operating Mode
is set to
2 + 8 Port)
1. Disp Type
HEX Hexadecimal values
DEC Decimal values
2. DMX Status
OUTPUT Sets the port as output
INPUT
Sets the port to receive DMX from
a controller that can be routed to
another DMX port
DISABLE Disables the output port
3. DMX Mode
SINGLE
(OUTPUT
Status only)
Disables Ethernet signal merging
LTP
(OUTPUT
Status only)
Sets Ethernet signal merging to
Latest Takes Precedence
HTP
(OUTPUT
Status only)
Sets Ethernet signal merging to
Highest Takes Precendence
NORMAL
(INPUT Status
only)
Sets input ports acting as a primary
controller
BACKUP
(INPUT Status
only)
Sets input ports acting as a backup
controller
4. Protocol
ArtNet
Sets the output/input source for the
DMX port to Art-Net™
sACN
Sets the output/input source for the
DMX port to sACN
5. Framerte/fs 010–040 Sets rate of speed for output ports
6. Network
00H–7FH (Hex)
000–128 (Dec)
Sets the net settings
7. 1st Universe
00H–FFH (Hex)
000–256 (Dec)
Sets the primary input/output
universe
8. Exit (Option 8 for Input Status or
Output Status in Single Mode)
Exits to the previous screen
8. LCD
Backlight
1. On Backlight on
2. 10 Seconds Display turns off after 10 seconds
3. 30 Seconds Display turns off after 30 seconds
4. Exit Exits to the previous screen
9. User
Preset
1. Art-net 8-port DMX
Sets all 8 ports to receive 8
universes of Art-Net™ from 0–7
2. sACN to 8-port DMX
Sets all 8 ports to receive 8
universes of sACN from 1–8
3. 1x8 DMX Splitter
Sets the product to operate as a
DMX splitter with all 8 outputs
receiving DMX from input A
4. 2x4 DMX Splitter
Sets
1–4
outputs to
input-port A
and the
5–8
outputs to
input-port B
5. Exit Exits to previous screen
10. Factory
Reset
NO
Resets to factory settings
YES
MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION
11
Net-X II User Manual Rev. 8
Operation
11. Record
Scenes
<1–10>
1. Name Scene _ _ _ _ _ _ _ _ _
Cancel
Customize scene name
Enter
2. Step: (0/0) 000–100
Scroll to the step that you prefer to
edit
3. Add Step
Adds steps to scene and takes a
snapshot of all 8 ports and records
step to memory
4. Delete Step
NO
Delete current step from scene
YES
5. Timing
1. Save Step Saves timing for the selected step
2. Fade In
Time
0.10S–9M59S Selects fade in time
3. Fade
Out Time
0.10S–9M59S Selects fade out time
4. Delay
Time
0.10S–9M59S Selects delay time
5. Exit Exits to previous screen
6. Exit Exits to previous screen
12. Trigger
Settings
1. Trigger 1 Scene 1–10
Assigns trigger 1 to one of the
10 scenes
2. Trigger 2 Scene 1–10
Assigns trigger 2 to one of the
10 scenes
3. Trigger 3 Scene 1–10
Assigns trigger 3 to one of the
10 scenes
4. Trigger 4 Scene 1–10
Assigns trigger 4 to one of the
10 scenes
5. Exit Exits to previous screen
13. Backup
1. Save Preset 1–10
Saves and loads configurations
2. Load Preset 1–10
3. Exit Exits to previous screen
14. Firmware
Version
__ _ __ _ Displays firmware version
15. Exit Exit Exits to main screen
MAIN LEVEL PROGRAMMING LEVELS DESCRIPTION
12
Operation
Net-X II User Manual Rev. 8
Operating Settings Configuration
Home Screen
The Net-X II has 2 home screens which display the current status of all ports. The home screen is
displayed when the menu is not being accessed.
To access the menu from the home screen, press the knob. To return to the home screen from the menu,
select 13. Exit and press the knob, or press & hold the control knob for 3 seconds (this can be done from
any position in the Menu map)
Primary Home Screen
# SYMBOL DESCRIPTION
1
A–B Ethernet in/through ports
- or x
(EtherNET ports status)
x is connected
- is disconnected
P1–4 Ports 1–4 universe label
P5–8 Ports 5–8 universe label
2
1–8 5-pin female port number label (1–8)
or x
(ports 1–8 signal sensor)
is detecting a signal
x is no signal detected
Art, ACN, or DMX
(Art-Net™, sACN, or DMX)
Defines output or input port protocol for outputs 1–4
Art, ACN, or DMX
(Art-Net™, sACN, or DMX)
Defines output or input port protocol for outputs 5–8
3 IP: Displays the device IP address
1
3
2
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108

Chauvet Net-X Manuel utilisateur

Chauvet
Marque
Chauvet
Modèle
Net-X
Catégorie
Stroboscopes
Taper
Manuel utilisateur
Ce manuel convient également à
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents