ECOVACS OZMOTEO+ Manuel utilisateur

Instruction Manual/Manuel d’instructions/Manual de instrucciones

2

EN

Live Smart. Enjoy Life.

Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our

Customer Service Center where a technician will be able to help you with your specic problem or question.

For more information, please visit the ECOVACS ROBOTICS ofcial website: www. ecovacs.com

The company reserves the right to make technological and/or design changes to this product for continuous improvement.

Thank you for choosing DEEBOT!

Instruction Manual ........................................................................................................... 2

EN

Manuel d’instructions ................................................................................................... 40

FR-CA

Manual de instrucciones .............................................................................................. 79

ES-MX

3EN

Contents

1. Important Safety Instructions ..........................................................................................................................................4

2. Package Contents ...........................................................................................................................................................10

3. Operating and Programming ..........................................................................................................................................15

4. Maintenance ....................................................................................................................................................................22

5. Indicator Light ..................................................................................................................................................................31

6. Troubleshooting ...............................................................................................................................................................33

7. Technical Speciﬁcations .................................................................................................................................................39

4

EN

1. Important Safety Instructions

1. Do not allow to be used as a toy. Close attention

is necessary when used by or near children.

2. Clear the area to be cleaned. Remove power

cords and small objects from the oor that

could entangle the Appliance. Tuck rug

fringe under the rug base, and lift items such

as curtains and tablecloths off the oor.

3. If there is a drop off in the cleaning area

due to a step or stairs, you should operate

the Appliance to ensure that it can detect

the step without falling over the edge. It

may become necessary to place a physical

barrier at the edge to keep the unit from

falling. Make sure the physical barrier is not

a trip hazard.

4. Only use as described in this manual. Only

use attachments recommended or sold by

the manufacturer.

5. Please make sure your power supply voltage

matches the power voltage marked on the

Docking Station.

6. Do not handle plug or appliance with wet hands.

7. Non-rechargeable batteries are prohibited.

8. Do not use without dust bin and/or lters in

place.

9. Do not operate the vacuum in an area where

there are lit candles or fragile objects on the

oor to be cleaned.

10. Do not use and store in extremely hot or

cold environments (below -5˚C /23˚F or

above 40˚C/104˚F). Please charge the robot

in temperature above 0°C/32°F and below

40°C/104°F.

11. Keep hair, loose clothing, ngers, and all

parts of body away from any openings and

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE.

SAVE THESE INSTRUCTIONS

For Household use only

When using an electrical appliance, basic

precautions should always be followed,

including the following:

WARNING: Read all safety warnings and

instructions. Failure to follow the warnings and

instructions may result in electric shock, re or

serious injury.

5EN

moving parts.

12. Do not operate the Appliance in a room

where an infant or child is sleeping.

13. For INDOOR use ONLY. Do not use the

Appliance in outdoor, commercial or industrial

environments. Do not use Appliance on wet

surfaces or surfaces with standing water.

14. Do not allow the Appliance to pick up large

objects like stones, large pieces of paper or

any item that may clog the Appliance.

15. Do not use Appliance to pick up ammable

or combustible materials such as gasoline,

printer or copier toner, or use in areas where

they may be present.

16. Do not use Appliance to pick up anything

that is burning or smoking, such as

cigarettes, matches, hot ashes, or anything

that could cause a re.

17. Do not put any object into openings. Do not

use with any opening blocked; keep free of

dust, lint, hair, and anything that may reduce

air ow.

18. Take care not to damage the power cord. Do

not pull on or carry the Appliance or Docking

Station by the power cord, use the power

cord as a handle, close a door on the power

cord, or pull power cord around sharp edges

or corners. Do not run Appliance over the

power cord. Keep power cord away from hot

surfaces. Do not unplug by pulling on cord.

To unplug, grasp the plug, not the cord.

19. If the power cord is damaged, it must be

replaced by the manufacturer or its service

agent in order to avoid a hazard.

20. Do not use the Docking Station if it is

damaged.

21. Do not use with a damaged power cord or

plug. Do not use the Appliance or Docking

Station if it is not working properly, has been

dropped, damaged, left outdoors, or come

in contact with water. It must be repaired

by the manufacturer or its service agent in

order to avoid a hazard.

22. Turn OFF the power switch before cleaning

or maintaining the Appliance. Turn off all

controls before unplugging. Always turn

off this appliance before connecting or

disconnecting motorized nozzle.

23. The plug must be removed from the

receptacle before cleaning or maintaining

6

EN

the Docking Station.

24. Remove the Appliance from the Docking

Station, and turn OFF the power switch to

the Appliance before removing the battery

for disposal of the Appliance.

25. The battery must be removed and discarded

according to local laws and regulations

before disposal of the Appliance.

26. Please dispose of used batteries according

to local laws and regulations.

27. Do not incinerate the Appliance even if it

is severely damaged. The batteries can

explode in a re.

28. When not using the Docking Station for a

long period of time, please unplug it.

29. The Appliance must be used in accordance

with the directions in this Instruction Manual.

ECOVACS ROBOTICS cannot be held liable

or responsible for any damages or injuries

caused by improper use.

30. Prevent unintentional starting. Ensure

the switch is in the off position before

connecting to battery pack, picking up

or carrying the appliance. Carrying the

appliance with your nger on the switch or

energizing appliance that have the switch on

invites accidents.

31. When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a re.

32. Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

33. Do not use a battery pack or appliance

that is damaged or modied. Damaged or

modied batteries may exhibit unpredictable

behavior resulting in re, explosion or risk of

injury.

34. Do not expose a battery pack or appliance

to re or excessive temperature. Exposure to

re or temperature above 130°C may cause

explosion. The temperature of 130°C can be

replaced by the temperature of 265°F.

7EN

35. Follow all charging instructions and do

not charge the battery pack or appliance

outside of the temperature range specied

in the instructions. Charging improperly or at

temperatures outside of the specied range

may damage the battery and increase the

risk of re.

36. Have servicing performed by a qualied

repair person using only identical

replacement parts. This will ensure that the

safety of the product is maintained.

37. Do not modify or attempt to repair the

appliance or the battery pack (as applicable)

except as indicated in the instructions for

use and care.

38. Place the cords from other appliances out of

the area to be cleaned.

39. Do not operate the vacuum in a room that

has lit candles on furniture that the vacuum

may accidentally hit or bump into.

40. Do not allow children to sit on the vacuum.

41. Use only as described in this manual. Use only

manufacturer’s recommended attachments.

42. Recharge only with the charger specied by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk

of re when used with another battery pack.

43. Use appliances only with specically designated

battery packs. Use of any other battery packs

may create a risk of injury and re.

44. The robot contains batteries that are only

replaceable by skilled persons. To replace

the robot’s battery, please contact Customer

Service.

45. If the robot will not be used for a long time,

fully charge the robot and power OFF for

storage and unplug the Docking Station.

46. To Reduce The Risk Of Electric Shock – Do

not use on wet surfaces. Do not expose to

rain. Store indoors.

47. To Reduce The Risk Of Injury From Moving

Parts – Unplug Before Servicing.

48. Risk Of Injury. Brush May Start Unexpectedly.

Unplug Before Cleaning or Servicing.

49. To reduce the risk of injury, user must read

instruction manual.

50. To Reduce The Risk Of Electric Shock – Do

not use outdoors or on wet surfaces.

8

EN

Direct current

Alternating current

This Device Complies with DHHS Radiation Rules, 21CFR Chapter 1,

Subchapter J.

Federal Communications Commission (FCC) Interference

Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generate, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio commu-

nications.

However, there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Opera-

tion is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could void

the user’s authority to operate this equipment.

RF exposure warning

This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance

with provided instructions and the antenna(s) used for this

transmitter must be installed to provide a separation distance

of at least 20 cm from all persons and must not be collocated

or operating in conjunction with any other antenna or

transmitter.

To disable Wi-Fi module on DEEBOT, power the robot ON.

Place the robot on the Docking Station making sure the

Charging Contacts on DEEBOT and the Docking Station Pins

make a connection.

Press and hold the AUTO Mode Button on the robot for 20

seconds until DEEBOT emits 3 beeps.

To enable Wi-Fi module on DEEBOT, power the robot OFF

and then power ON. The Wi- Fi module is turned on when

DEEBOT is restarted.

9EN

Air Freshener Capsule

Main Ingredients: Ethylene/Vinyl Acetate

Copolymer, Fragrance

See manufacturing date, expiration date, and lot

number on pack.

*Each unit will last up to 60 days based on 1 hour

of use per day on ambient temperature conditions.

CAUTION:

USE ONLY AS DIRECTED. KEEP OUT OF REACH

OF CHILDREN AND PETS. EYE IRRITANT. Avoid

contact with eyes, skin, and clothing. In case of

contact with skin or eyes, wash immediately with

plenty of water for 15 minutes. If eye irritation

persists, consult a physician. Do not ingest. IF

SWALLOWED, do not induce vomitting; call

physician or poison control center immediately. DO

NOT PLACE NEAR HEAT OR OPEN FLAME. The

product is not to be used by persons with reduced

physical, sensory or mental capabilities. Used on

DEEBOT and for indoor air deodorization only. Do

not disassemble the capsule. Wash hands after

handling. Keep away from foodstuffs, beverages

and feed. Keep in a dry and well-ventilated place.

Dispose in accordance with local regulation.

10

EN

2. Package Contents/2.1 Package Contents

Robot

Instruction Manual Side Brushes

Disposable Mopping Pads

Note: Figures and illustrations are for reference only and may differ from actual product appearance.

Product design and specications are subject to changes without notice.

OZMO Pro

Oscillating System Air Freshener (Pre-installed) Air Freshener Capsule

Auto-Empty Station Ramp Extension

(For carpet use only)

Dust Bag

11 EN

2. Package Contents/2.2 Product Diagram

Robot

AUTO Mode Button

Top Cover

Wi-Fi Status

Indicator

TrueMapping

Distance Sensor

Anti-collision Bumper

RESET Button

Power Switch

Multi-function

Cleaning Tool

TrueDetect

3D Sensor

Auto-Empty Dust Bin

Dust Bin Handle

Release Button

Filter Net

Auto-Empty Outlet

Sponge Filter

High Efciency Filter

12

EN

Charging Contacts

Anti-drop Sensors

Air Freshener

(Pre-installed)

Main Brush

Release Button

Universal Wheel

Side Brushes

Anti-drop Sensors

Driving Wheels

Main Brush

Carpet Detection

Sensor

Bottom View Auto-Empty Station

Lid Release Button

Indicator Light

Infrared Singnal Emitter

Auto-Empty Inlet Auto-Empty Station Pins

Ramp Extension

(For carpet use only)

13 EN

Auto-Empty Station (Back)

Auto-Empty Station (Top)

Dust Bag Socket

Dust Evacuation Tube

Power Cord Wrap

Blower Cover

Auto-Empty Station (Bottom)

Base Screw Socket

Dust Evacuation Tube

+ Tube Cover

Ramp Extension Slot

Dust Evacuation Tube

Cover Set Screws

14

EN

Reservoir

Disposable

Mopping Pad

Water Inlet

Reservoir

Release Button

OZMO Pro Oscillating System

Capsule Container

Air Freshener

Air Freshener (Pre-installed)

15 EN

3. Operating and Programming/3.1 Notes Before Cleaning

Tidy up the area to be cleaned by putting

furniture, such as chairs, in their proper place.

During the rst use, make sure each room door

is open to help DEEBOT fully explore your house.

It may be necessary to place a physical

barrier at the edge of a drop to stop the

unit from falling over the edge.

Put away objects including

cables, cloths and slippers,

etc. on the oor to improve the

cleaning efciency.

Before using the product on a rug

with tasseled edges, please fold

the rug edges under.

Please do not stand in narrow

spaces, such as hallways, and

make sure not to block the

Detection Sensor.

16

EN

3. Operating and Programming/3.2 Quick Start

Please remove all protection materials on Robot and Docking

Station before use.

* For carpet use only

When Auto-Empty Station is placed on a carpet, install the Ramp

Extension to the station for DEEBOT to return to charge successfully.

Install Side Brushes

Click

17 EN

6.5

3 Charge DEEBOT

Note: I = ON, O = OFF.

DEEBOT cannot be charged when being powered OFF.

ashes when DEEBOT is charging. goes out when DEEBOT is

fully charged.

* Before charging DEEBOT, make sure to install the Air Freshener.

2 Power ON

3. Operating and Programming/

3.3 Charging DEEBOT

1 Auto-Empty Station Placement

18

EN

ECOVACS HOME

3. Operating and Programming/3.4 ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.

Wi-Fi Indicator LightBefore you start, make sure that:

Tips:

If you have any problems during the Wi-Fi setup process, refer to the

Troubleshooting > Wi-Fi Connection section in this manual.

• Your mobile phone is connected to a Wi-Fi network.

• The 2.4GHz band wireless signal is enabled on your router.

• The Wi-Fi indicator light on DEEBOT is slowly ashing.

Slowly flashing Disconnected to Wi-Fi or

waiting for Wi-Fi connection

Rapidly flashing Connecting to Wi-Fi

Solid Connected to Wi-Fi

19 EN

1

3

3. Operating and Programming/3.5 Operating DEEBOT

During the ﬁrst cleaning,

1.Please make sure to install Air Freshener to create a home map in ECOVACS HOME App.

2.Please supervise DEEBOT and assist it should there be a problem.

Pressing for 3 seconds to send DEEBOT back to the Docking Station.

Start

Install Air Freshener Press

2Pause Return to Charge

Note: The robot’s Control Panel stops glowing after the robot is

paused for a few minutes. Press the AUTO Mode Button on DEEBOT

to wake up the robot.

Click

20

EN

3. Operating and Programming/3.6 OZMO Pro Oscillating System

Add Water Attach Disposable Mopping Pad

Note:

1.Install OZMO Pro Oscillating System for oor scrubbing.

2.With electric oscillating mopping up to 480 times per minute, OZMO Pro is applicable for areas of highly concentrated dirt or dust.

3.Before installing OZMO Pro, please make sure the contacts are thoroughly dry.

4.Please avoid using OZMO Pro on the carpet.

1 2

* To prolong the service life of OZMO Pro, it

is recommended to use puried water or

softened water.

* Do not soak OZMO Pro in water.

3Dry Contacts Thoroughly

4Install OZMO Pro

5Start Cleaning

Click

La page charge ...

ECOVACS OZMOTEO+ Manuel utilisateur

ECOVACS OZMOTEO+ Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents