ECOVACS DEEBOT N8 Pro+ Le manuel du propriétaire

Instruction Manual/Bedienungsanleitung/Manual de instrucciones/

Manuel d'instructions/Manuale d'uso/Руководство по эксплуатации/

Instrukcja obsługi/Gebruiksaanwijzing

2

EN

Important Safety Instructions

1. This Appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the Appliance in a safe way

and understand the hazards involved. Children shall not

play with the Appliance. Cleaning and user maintenance

shall not be made by children without supervision.

2. Clear the area to be cleaned. Remove power cords

and small objects from the oor that could entangle

the Appliance. Tuck rug fringe under the rug base, and

lift items such as curtains and tablecloths off the oor.

3. If there is a drop off in the cleaning area due to a step

or stairs, you should operate the Appliance to ensure

that it can detect the step without falling over the

edge. It may become necessary to place a physical

barrier at the edge to keep the unit from falling. Make

sure the physical barrier is not a trip hazard.

4. Only use as described in this manual. Only use

attachments recommended or sold by the manufacturer.

5. Please make sure your power supply source voltage

matches the power voltage marked on the Auto-

Empty Station.

6. For INDOOR household use ONLY. Do not use

the Appliance in outdoor, commercial or industrial

environments.

7. Use only the original rechargeable battery and Auto-

Empty Station provided with the Appliance from

the manufacturer. Non-rechargeable batteries are

prohibited. For battery information, please refer to

Specications section.

8. Do not use without dust bin and/or lters in place.

9. Do not operate the Appliance in an area where there

are lit candles or fragile objects.

10. Do not use in extremely hot or cold environments

(below -5˚C/23˚F or above 40˚C/104˚F).

11. Keep hair, loose clothing, ngers, and all parts of

body away from any openings and moving parts.

12. Do not operate the Appliance in a room where an

infant or child is sleeping.

13. Do not use Appliance on wet surfaces or surfaces

with standing water.

14. Do not allow the Appliance to pick up large objects

like stones, large pieces of paper or any item that

may clog the Appliance.

15. Do not use Appliance to pick up ammable or

combustible materials such as gasoline, printer or

copier toner, or use in areas where they may be present.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical Appliance, basic precautions

should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE

SAVE THESE INSTRUCTIONS

3

EN

16. Do not use Appliance to pick up anything that is

burning or smoking, such as cigarettes, matches,

hot ashes, or anything that could cause a re.

17. Do not put objects into the suction intake. Do not use

if the suction intake is blocked. Keep the intake clear

of dust, lint, hair, or anything that may reduce air ow.

18. Take care not to damage the power cord. Do not pull

on or carry the Appliance or Auto-Empty Station by

the power cord, use the power cord as a handle, close

a door on the power cord, or pull power cord around

sharp edges or corners. Do not run Appliance over the

power cord. Keep power cord away from hot surfaces.

19. If the power cord is damaged, it must be replaced

by the manufacturer or its service agent in order to

avoid a hazard.

20. Do not use with a damaged power cord or receptacle.

Do not use the Appliance or Auto-Empty Station if it

is not working properly, has been dropped, damaged,

left outdoors, or come in contact with water. It must

be repaired by the manufacturer or its service agent in

order to avoid a hazard.

21. Do not use with a damaged power cord or receptacle.

Do not use the Appliance or Auto-Empty Station if it

is not working properly, has been dropped, damaged,

left outdoors, or come in contact with water. It must

be repaired by the manufacturer or its service agent in

order to avoid a hazard.

22. Turn OFF the power switch before cleaning or

maintaining the Appliance.

23. The plug must be removed from the receptacle before

cleaning or maintaining the Auto-Empty Station.

24. Remove the Appliance from the Auto-Empty

Station, and turn OFF the power switch to the

Appliance before removing the battery for disposal

of the Appliance.

25. The battery must be removed and discarded

according to local laws and regulations before

disposal of the Appliance.

26. Please dispose of used batteries according to local

laws and regulations.

27. Do not incinerate the Appliance even if it is severely

damaged. The batteries can explode in a re.

28. When not using the Auto-Empty Station for a long

period of time, please unplug it.

29. The Appliance must be used in accordance with

the directions in this Instruction Manual. ECOVACS

ROBOTICS cannot be held liable or responsible for

any damages or injuries caused by improper use.

30. The robot contains batteries that are only

replaceable by skilled persons. To replace the

robot’s battery, please contact Customer Service.

31. If the robot will not be used for a long time, power OFF

the robot for storage and unplug the Auto-Empty Station.

32. WARNING: For the purposes of recharging the

battery, only use the detachable supply unit

CH1918 provided with the Appliance, or CH1822

sold separately as an accessory.

4

EN

To satisfy RF exposure requirements, a separation

distance of 20 cm or more should be maintained between

this device and persons during device operation.

To ensure compliance, operations at closer than this

distance is not recommended. The antenna used for this

transmitter must not be co-located in conjunction with any

other antenna or transmitter.

To disable Wi-Fi module on DEEBOT, power the robot ON.

Place the robot on the Auto-Empty Station making sure

the Charging Contacts on DEEBOT and the Auto-Empty

Station Pins make a connection.

Press and hold the AUTO Mode Button on the robot for

20 seconds until DEEBOT emits 3 beeps.

To enable Wi-Fi module on DEEBOT, power the robot OFF

and then power ON. The Wi- Fi module is turned on when

DEEBOT is restarted.

Correct Disposal of this Product

This marking indicates that this product should not be

disposed of with other household waste throughout

the EU. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material

resources. To recycle your used device, please use the

return and collection systems or contact the retailer where

the product was purchased. They can safely recycle this

product.

For EU Countries

Class II

Short-circuit-proof safety isolating

transformer

Switch mode power supply

For indoor use only

Direct current

Alternating current

For EU Declaration of Conformity information, visit https://

www.ecovacs.com/global/compliance

5

EN

Package Contents

Robot Auto-Empty Station

Instruction Manual Side Brushes

Mopping Pad Plate

Washable Mopping

Pad

Disposable

Mopping Pads

Note: Figures and illustrations are for reference only and may differ

from actual product appearance.

Product design and specications are subject to changes without

notice.

Power Cord

Dust Bag

Product Diagram

Robot

AUTO Mode Button

Top Cover

TrueMapping

Distance Sensor

Anti-collision Bumper

TrueDetect

3D Sensor

6

EN

Wi-Fi Indicator

Light

RESET Button

Power Switch

Multi-function

Cleaning Tool

Auto-Empty Dust Bin

Dust Bin Handle

Release Button

Filter Net

Auto-Empty Outlet

Sponge Filter

High Efciency Filter

Charging Contacts

Anti-drop Sensors

Reservoir

Main Brush

Release Button

Universal Wheel

Side Brushes

Water Outlet

Anti-drop Sensors

Driving Wheels

Main Brush

Carpet Detection

Sensor

Bottom View

7

EN

Auto-Empty Station

Lid Release Button

Indicator Light

Infrared Singnal Emitter

Auto-Empty Inlet

Auto-Empty Station Pins

Auto-Empty Station (Back)

Power Cord Port

Power Cord Wrap

Auto-Empty Station (Top)

Dust Bag Socket

Dust Evacuation Tube

Blower Cover

Auto-Empty Station (Bottom)

Base Screw Socket

Dust Evacuation Tube

+ Tube Cover

Ramp Extension Slot

Dust Evacuation Tube

Cover Set Screws

8

EN

Reservoir

Water Inlet

Mopping Pad

Water Inlet Cover

Reservoir Release

Button

Mopping Pad Plate

Power Cord

Notes Before Cleaning

Tidy up the area to be cleaned by

putting furniture, such as chairs,

in their proper place.

During the rst use, make sure

each room door is open to help

DEEBOT fully explore your house.

It may be necessary to place a

physical barrier at the edge of a

drop to stop the unit from falling

over the edge.

Put away objects including cables, cloths and slippers, etc.

on the oor to improve the cleaning efciency.

Before using the product on a rug with tasseled edges,

please fold the rug edges under.

Please do not stand in narrow spaces, such as hallways, and

make sure not to block the LDS Laser Distance Sensor.

9

EN

Quick Start

1

Remove Protective Materials

2

Assemble Auto-Empty Station

3

Install Side Brushes

Click

10

EN

Charging DEEBOT

1

Auto-Empty Station Placement

2

Power ON

Note: I = ON, O = OFF.

DEEBOT cannot be charged

when being powered OFF.

6.5

3

Charge DEEBOT

Empty remaining water from

the Reservoir and remove the

Reservoir and the mopping pad

plate before charging DEEBOT.

ashes when DEEBOT is

charging. goes out when

DEEBOT is fully charged.

ECOVACS HOME

ECOVACS HOME App

To enjoy all available features, it is recommended to control your

DEEBOT via the ECOVACS HOME app.

Wi-Fi Indicator Light

Before you start, make sure that:

Tips: If you have any problems during the Wi-Fi setup process, refer

to the Troubleshooting > Wi-Fi Connection section in this manual.

• Your mobile phone is connected to a Wi-Fi network.

• The 2.4GHz band wireless signal is enabled on your router.

• The Wi-Fi indicator light on DEEBOT is slowly ashing.

Slowly flashing

Disconnected to Wi-Fi or

waiting for Wi-Fi connection

Rapidly flashing Connecting to Wi-Fi

Solid Connected to Wi-Fi

11

EN

*

When Auto-Empty Station is connected

to power, DEEBOT automatically

returns to the station to charge and

empty the Dust Bin as it needs.

1

3

Operating DEEBOT

During the rst cleaning, please supervise DEEBOT and assist it should

there be a problem.

Pressing for 3 seconds to send

DEEBOT back to the Auto-Empty Station.

Start

2

Pause

Return to Charge

Note: The robot’s Control Panel stops

glowing after the robot is paused for

a few minutes. Press the AUTO Mode

Button on DEEBOT to wake up the robot.

1

2

OZMO Mopping System

Note: To prolong the service life of the reservoir, it is recommended

to use puried water or softened water for OZMO mopping system.

OR

Note: When DEEBOT is mopping, DEEBOT automatically detects

the carpet and keeps away from it. If you need to clean the carpet,

please uninstall the mopping pad plate rst.

Click

12

EN

To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:

A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note: ECOVACS manufactures various replacement parts and ttings. Please contact Customer Service for more information on replacement parts.

Robot Part Maintenance Frequency Replacement Frequency

Disposable Mopping Pad / Replace after each use

Washable Mopping Pad After each use Every 50 washes

Dust Bag /

Dust Bags should be replaced when prompted by

the Indicator Light/ECOVACS HOME App.

Reservoir/Mopping Pad Plate After each use /

Side Brush Once every 2 weeks Every 3-6 months

Main Brush Once per week Every 6-12 months

Sponge Filter/ High Efciency Filter Once per week Every 3-6 months

TrueDetect 3D Sensor

Universal Wheel

Anti-Drop Sensors

Bumper

Charging Contacts

Auto-Empty Station Pins

Once per week /

Regular Maintenance

Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Auto-Empty Station.

13

EN

OZMO Mopping System

1 2

Washable Mopping Pad

Disposable Mopping Pad

Clean the water inlet filter on the

bottom of the Reservoir if it is clogged.

14

EN

3 3

11

2 2

4

5

Auto-Empty Dust Bin and Filters

Dust Bin Filter

15

EN

Auto-Empty Station

Auto-Empty Station Pins

Infrared Signal Emitter

Note: Before performing cleaning and maintenance on Auto-Empty

Station, unplug it rst.

* For a proper maintenance, wipe with a clean dry cloth, and avoid

using any detergent or cleaning spray.

Main Brush and Side Brushes

Main Brush

Side Brushes

16

EN

Dust Bag

1

* The Dust Bag will be sealed by the handle so the dust will not leak.

Dispose the Dust Bag

2

Clean the Blower Cover

3

Install the Dust Bag

4

Close the Dust Container Lid

17

EN

Close the Dust Container Lid

Dust Evacuation Tube

Unscrew the Dust Evacuation

Tube Cover

Uninstall the Dust Evacuation

Tube Cover

Clean the Dust Evacuation

Tube

Other Components

Note: Before cleaning the robot’s Charging Contacts and Auto-Empty

Station Pins, turn the robot OFF and unplug the Auto-Empty Station.

18

EN

Storage

If DEEBOT will not be used for a while, fully charge DEEBOT and power

OFF before storage. Charge DEEBOT every 1.5 month to prevent battery

drain.

Note: When DEEBOT is not cleaning, it is recommended to keep

DEEBOT powered ON and charging.

Indicator Light

DEEBOT will tell you something is wrong with an indicator light

and voice report. More detailed support is available through the

ECOVACS HOME and online website.

Indicator Light Scenario

AUTO Mode Button glows a

solid WHITE.

The robot is cleaning.

The robot is paused while cleaning.

AUTO Mode Button ashes

WHITE.

The robot is charging.

The robot is starting.

The robot is relocating.

AUTO Mode Button glows a

solid RED.

The robot has low battery.

AUTO Mode Button ashes

RED.

The robot has a problem.

19

EN

No. Problem Possible Causes Solutions

1 DEEBOT is not charging.

DEEBOT is not switched ON. Switch ON DEEBOT.

DEEBOT has not connected to the Auto-

Empty Station.

Be sure that the robot’s Charging Contacts have

connected to the Auto-Empty Station Pins.

The Power Cord is not connected to the

Auto-Empty Station.

Make sure the Power Cord is rmly connected to the

Auto-Empty Station.

The Auto-Empty Station is not connected to

the power supply.

Make sure the Auto-Empty Station is connected to the

power supply.

The battery is completely discharged. Please contact Customer Care for help.

2

DEEBOT cannot return to the

Auto-Empty Station.

The Auto-Empty Station is not correctly connected.

Make sure the Auto-Empty Station is correctly connected.

The Auto-Empty Station is manually moved

during the cleaning.

It is suggested not to move the Auto-Empty Station

during the cleaning.

DEEBOT is paused for more than 90 minutes.

It is suggested not to pause DEEBOT for more than 90

minutes.

DEEBOT did not start cleaning from the Auto-

Empty Station.

Make sure DEEBOT starts cleaning from the Auto-Empty

Station.

3

DEEBOT gets stuck while

working and stops.

DEEBOT is tangled with something on the

oor (electrical wires, curtains, carpet

fringing, etc.).

DEEBOT will try various ways to free itself. If it is

unsuccessful, manually remove the obstacles and restart.

DEEBOT might be stuck under furniture with

an entrance of similar height.

Please set a physical barrier, or set a Virtual Boundary in

the ECOVACS HOME App.

Troubleshooting

20

EN

No. Malfunction Possible Causes Solutions

4

DEEBOT returns to the Auto-

Empty Station before it has

nished cleaning.

Working time varies according to oor

surface, room complexity and the Cleaning

Mode selected. When the battery gets low,

DEEBOT automatically switches to Recharge

Mode and returns to the Auto-Empty Station

to recharge itself.

Turn on Continuous Cleaning function in ECOVACS

HOME App. DEEBOT will automatically resume the

uncompleted cleaning cycle when Continuous Cleaning

is enabled.

DEEBOT is unable to reach certain areas

blocked by furniture or barriers.

Tidy up the area to be cleaned by putting furniture and

small objects in their proper place.

The Auto-Empty Station is too distant from

the center of the house.

Please place the Auto-Empty Station against the wall of a

central room of the house.

5

DEEBOT does not clean

automatically at the scheduled

time.

Time Scheduling function is cancelled.

Program DEEBOT to clean at specic times using the

ECOVACS HOME App.

DEEBOT is switched OFF. Switch ON DEEBOT.

The robot’s battery is low.

Keep DEEBOT switched ON and connected to the Auto-

Empty Station to make sure it has a full battery to work at

any time.

6

The water is not coming out of

the Reservoir when DEEBOT is

mopping.

The water inlet lter on the bottom of

Reservoir is clogged.

Unscrew the water inlet on the bottom of Reservoir and

clean the lter.

The Reservoir runs out of water. Add water into the Reservoir.

The water outlets on the bottom of DEEBOT

are clogged.

Check the water outlets on the bottom and clean.

La page charge ...

ECOVACS DEEBOT N8 Pro+ Le manuel du propriétaire

ECOVACS DEEBOT N8 Pro+ Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents