NETUM DS7100 Wired 2D QR Barcode Scanner Mode d'emploi

Wired 2D Scanner Manual

Quick Setup Guide

USB wired 1D & 2D Plug & Play Bar code Scanner

Supports Windows XP, Win7/8/10,MAC etc.

Packing list:

Quick Start Setup Guide x1 pc

Barcode scanner x 1 pc

NT001

English 1-14

Deutsch 15-28

Français 29-42

Italiano 43-56

Español 57-70

English

- 1 -

Quick Setup Guide

This is 1D&2D plug and play model if you use a US keyboard. If you use other

type of keyboard, plug the USB cable on your device , setup keyboard language

before you use it. After that the scanner can start to work.

Barcode Programming

Netum barcode scanners are factory programmed for common terminal and

communications settings. If you need to change these settings, programming is

accomplished by scanning the bar codes in this guide. An asterisk (*) next to an

option indicates the default setting.

Communication Mode

USB -KBW

When you connect the scanner to the Host via a USB connection, you can

enable the USB-KBW feature by scanning the barcode below. It works on a Plug

and Play basis and no driver is required.

3030011

USB KBW*

- 2 -

Keyboard Language

In order to let scanner upload the codes in a correct way, you have to set the

keyboard language.

For example

If you use French Keyboard, scan below barcode of “French keyboard” then

scanner will upload barcodes according to France keyboard layout. American

Keyboard is set by default, if you use a US keyboard you can skip this step.

USB COM

If you connect scanner to the Host via a USB connection, the USB COM Port

Emulation feature allows the Host to receive data in the way as a serial port

does.

3030012

USB COM

6060101

America Keyboard*

6060112

Portugal Keyboard

6060108

French Keyboard

6060116

Spain Keyboard

- 3 -

6060109

Germany Keyboard

606010D

Italy Keyboard

606010B

Hungary Keyboard

6060102

Belgium Keyboard

606011A

Turkey Q Keyboard

606011B

UK Keyboard

606011D

Czech Keyboard

6060117

Sweden Keyboard

- 4 -

Scanning Mode

· Key Holding

Press the button to trigger the reading, release the button to end the reading.

Reading success or reading time over a single reading time will end the reading

· Continuous Mode

Under continuous mode scanner performs continuous work. Reading success

or reading time over a single reading time will end the reading. More than the

speci�ied time will automatically trigger the next reading.

2050220

Tigger Mode *

2050204

Continuous Mode

· Auto Sense Mode

Under auto sense mode, scanner detects the brightness of the surroundings.

Trigger reading when the brightness changes. Reading success or reading time

over a single reading time will end the reading. Regardless of the last success

or failure to read, re-enter the detection of the surrounding environment

brightness.

2050209

Auto Sense Mode

- 5 -

Terminator con�iguration

The scanner provides a shortcut for setting the terminating character suf�ix to

CR or CRLF and enabling it by scanning the appropriate barcode below.

3030050

Disable

3030051

CR & LF*

3030052

CR

3030053

TAB

Beeper Volume

To select a decode beep volume, scan the appropriate bar code.

2050802

Low

2050801

Medium

2050800

*High

- 6 -

Mute

To enable or disable close all prompt, scan the appropriate bar code below.

Default Con�iguration

If you want to cancel all the con�iguration that you have done to the scanner.

Scan below barcodes to the restore factory.

30300C0

Disable *

30300C1

Enable

303FFF3

Restore Factory Defaults

Symbologies

Add-On Code

An EAN/UPC barcode can be augmented with a two-digit or �ive-digit add-on

code to form a new one. In the examples below, the part surrounded by blue

dotted line is an EAN-8 barcode while the part circled by red dotted line is

add-on code.

- 7 -

Interleaved 2 of 5

Enable/Disable Interleaved 2 of 5

To enable or disable Interleaved 2 of 5, scan the appropriate bar code below.

2010E00

* Disable 2/5-Digit Add-On Code

2010E02

Enable 2/5-Digit Add-On Code

1000061

*Enable Interleaved 2 of 5

1000060

Disable Interleaved 2 of 5

- 8 -

Codabar

Enable/Disable Codabar

To enable or disable Codabar, scan the appropriate bar code below.

Note: Interleaved 2 of 5 with the length of 14 digits by default, if you have other

length please scan “Any length”

Any Length

Enable Codabar

1000071

1000070

*Disable Codabar

- 9 -

MSI/MSI PLESSEY

Enable/Disable MSI

To enable or disable MSI, scan the appropriate bar code below.

ISSN

Enable/Disable ISSN

To enable or disable ISSN, scan the appropriate bar code below.

GS1 DataBar/RSS

Enable/Disable GS1 DataBar-14

To enable or disable GS1 DataBar-14, scan the appropriate bar code below.

1000141

Enable MSI

1000140

*Disable MSI

3030330

*Disable ISSN

3030331

Enable ISSN

1000351

Enable GS1 DataBar-14

1000350

*Disable GS1 DataBar-14

- 10 -

Enable/Disable GS1 DataBar Limited

To enable or disable GS1 DataBar Limited, scan the appropriate bar code below.

Enable/Disable GS1 DataBar Expanded

To enable or disable GS1 DataBar Expanded, scan the appropriate bar code

below.

ID Inverse barcode

Normal barcode - White background and black bars

Reverse barcode- Black background with white bars

3030910

*Read Normal 1D Barcode

3030911

Reverse 1D Barcode

1000361

Enable GS1 DataBar Limited

1000360

*Disable GS1 DataBar Limited

1000371

Enable GS1 DataBar Expanded

1000370

*Disable GS1 DataBar Expanded

- 11 -

2D Symbologies

PDF417

Enable/Disable PDF417

Reverse PDF417 Code

To enable or disable PDF417, scan the appropriate bar code below.

QR

Enable/Disable QR

To enable or disable QR, scan the appropriate bar code below.

1000170

Disable PDF417

1000171

*Enable PDF417

3030610

*Read Normal PDF417

3030612

Read Both Normal And Reverse PDF417

1003250

Disable QR Code

1003251

*Enable QR Code

- 12 -

Data Matrix(DM)

Enable/Disable Data Matrix(DM)

Reverse Code

To enable or disable Data Matrix(DM), scan the appropriate bar code below.

Reverse QR Code

3030670

*Read Normal QR Code

3030672

Read Both Normal And Reverse QR Code

1003240

Disable DataMatrix

1003241

*Enable DataMatrix

30306B0

*Read Normal Data Matrix Code

- 13 -

Maxi Code

Enable/Disable Maxi Code

To enable or disable Maxi Code, scan the appropriate bar code below.

Aztec Code

Enable/Disable Aztec Code

To enable or disable Maxi Code, scan the appropriate bar code below.

30306B2

Read both Normal And Reverse Data Matrix Code

1003260

*Disable MaxiCode

1003280

Disable Aztec Code

1003261

Enable MaxiCode

1003281

Enable Aztec Code

- 14 -

Note: If you want other programmings which is not available in this

manual, please do not hesitate to contact us: [email protected]

Support For any inquiries concerning our products, please send an email to

[email protected], and we will respond to you as soon as possible.

Contact Information

Tel.: +0086 20-3222-8813

Email: service@netum.net

Whasapp: +86 188 2626 1132

Addr.:Room 301, 6th Floor and full 3rd Floor, Building 1, No. 51 Xiangshan

Avenue, Ningxi Street, Zengcheng District, Guangzhou, Guangdong, China/

511356

Website: https://www.netum.net/

Name: APEX CE SPECIALISTS LIMITED

Add: UNIT 3D NORTH POINT HOUSE,NORTH POINT BUSINESS PARK,

NEW MALLOW ROAD,CORK，T23 AT2P，IRELAND Contact: Wells

Tel: +353212066339

E-Mail: [email protected]

Made in China

Deutsch

- 15 -

Schnellstartanleitung

Wenn Sie eine amerikanische Tastatur verwenden, können Sie den Scanner

sofort verwenden, indem Sie ihn einstecken. Wenn Sie einen anderen

Tastaturtyp verwenden, müssen Sie die Sprache der Tastatur vor der

Verwendung einstellen. Weitere Informationen �inden Sie unter

"Tastatursprache".

Barcode-Einstellprogramm

Scanner sind werkseitig auf allgemeine Terminaleinstellungen programmiert.

Um diese Einstellungen zu ändern, erfolgt die Programmierung durch Scannen

der Barcodes in diesem Handbuch. Ein Stern (*) neben einer Option zeigt die

Werkseinstellung an.

Tastatursprache

Um nach dem Scannen des Codes den korrekten Barcode-Wert auszugeben,

muss die Tastatursprache vor der Verwendung eingestellt werden.

Zum Beipiel:

Wenn Sie eine französische Tastatur verwenden , scannen Sie den

Befehlsbarcode der "französischen Tastatur". Danach gibt der Scanner die

Barcodes gemäß der französischen Tastatur aus. Die amerikanische Tastatur

ist standardmäßig kon�iguriert. Wenn Sie eine amerikanische Tastatur

verwenden, können Sie diesen Schritt ignorieren.

6060101

Amerikanische Tastatur *

6060112

Portugiesische Tastatur

- 16 -

6060108

Französische Tastatur

6060109

DeutscheTastatur

6060116

Spanische Tastatur

606011A

Türkische Q Tastatur

606010D

ItalienischeTastatur

606010B

Ungarische Tastatur

6060102

Belgische Tastatur

606011B

Englische Tastatur

606011D

Tschechische Tastatur

6060117

Schwedische Tastatur

La page charge ...

NETUM DS7100 Wired 2D QR Barcode Scanner Mode d'emploi

Ce manuel convient également à

NETUM DS7100 Wired 2D QR Barcode Scanner Mode d'emploi

dans d''autres langues

Autres documents