Haier L19C1120 Le manuel du propriétaire

TFT-LCD TV

OWNER

'S MANUAL

Please READ this manual carefully before

operating your TV, and retain it for future

reference.

MODELS:

L19C1120

L22C1120

L24C1180

L26C1120

R

2

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air TV programming,

with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June

12 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to

receive over the air digital programming, but should continue to work as before for other purposes (e.g.,

for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies, or playing

video games).

For more information,

call the FCC at 1-888-CALL-FCC (1-888-225-5322)

or see www.DTV.gov.

For information on the TV Converter program, and on government coupons that may be used toward

the purchase of one, see www.dtv2009.gov,

or call the NTIA at 1-888-DTV-2009

.

AVISO RELATIVO A LA TRANSICIÓN A TELEVISIÓN DIGITAL

Este equipo incorpora un sintonizador de televisión digital, lo que le permitirá recibir una programación

digital televisada por aire, con una antena adecuada, cuando se terminará la transmisión de alta potencia

de la televisión analógica en los Estados Unidos el 12 de Junio de 2009. Ciertos receptores de televisión

antiguos, si dependen de una antena de TV, necesitarán un conversor de TV para recibir por el aire una

programación digital, pero seguirán funcionando como antes para otros usos (por ejemplo para ver

emisoras de TV de baja potencia que todavía transmiten en analógico, para ver películas pregrabadas, o

para utilizar sus videojuegos).

Para obtener más información,

llame FCC 1-888-CALL-FCC (1-888-225-5322)

o refiérase a www.DTV.gov.

Para toda información sobre el programa de conversores de TV, y acerca de los cupones del gobierno

que se pueden usar para comprarlos, refiérase a www.dtv2009.gov,

o llame al NTIA al 1-888-DTV-2009.

SYMBOL SYMBOL DEFINITION

DANGEROUS VOLTAGE: The lightning flash with arrowhead

symbol, within an equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of

electrical shock to persons.

INSTRUCTIONS: The exclamation point within on equilateral

triangle to alert the user to the presence of important operating and

maintenance (servicing) instruction in the literature accompanying the

appliance.

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus.

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

Batteries installed warning

Caution - Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type.

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as

sunshine, fire or the like.

3

NOTICE

1. The changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the

emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modification to this equipment. It is the responsibilities of the user to correct such interference.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio/TV technician for help.

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Dangerously high voltages are present inside the TV. Do not open the cabinet. Refer servicing to

qualified personnel only.

SAFETY: Lamp Disposal

Hg

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR

DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION,

CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.

FOR YOUR SAFETY

Before operating the TV please read this manual thoroughly. This manual should be retained for future

reference.

FCC Class B Radio Frequency Interference Statement

WARNING:

(FOR FCC CERTIFIED MODELS)

4

PRECAUTIONS AND REMINDERS

Place the TV on even

surfaces.

Unplug immediately if there

is smoke and a bad odor

from the TV.

Don't throw any object

inside the TV cabinet

like metals or flammable

materials.

Don't place the TV in

confined spaces or in a box

when using it.

Unplug immediately if

foreign materials are put

inside the TV cabinet or if

the TV fell down.

Prohibit/Avoid opening TV

cabinet.

Remember to unplug the

AC cord from the AC outlet

before cleaning. Do not use

liquid cleaners or aerosol

cleaners to clean the display.

Make sure to unplug the

unit when not in use for a

long period of time (days).

Do not cover or block

any vents and openings.

Inadequate ventilation

may shorten the life of

the display unit and cause

overheating.

Avoid direct sunlight, dusty,

high humidity and smoky

areas

.

Call service personnel to

clean the internal part of

the TV once a year.

Do not place the display

near water, such as bathtub,

washbasin, kitchen sink

laundry tub, swimming pool

or in a damp basement.

Notice for Remote Controller

Avoid Dropping

2

3

4

5

6

7

8

9

:

1

Avoid Liquids

2

3

4

5

6

7

8

9

:

1

Avoid Aerosol Cleaners

2

3

4

5

6

7

8

9

:

1

5

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not

fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

15. The TV should be operated only from the type of power source indicated on the label. If you are not

sure of the type of power supplied to your home, consult your dealer or local power company.

16. The Class I apparatus shall be connected to a mains socket outlet with a protective earthing

connection.

17. The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall

remain readily operable.

18. CAUTION – These servicing instructions are for use by qualified service personnel only. To reduce

the risk of electric shock, do not perform any servicing other than that contained in the operating

instructions unless you are qualified to do so.

19. For use only with UL Listed Wall Mount Bracket with minimum weight/load: Please see page 22.

20. CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a

converter box after June 12 2009,to receive over-the-air broadcasts with an antenna because of the

Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with

cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more

6

information, call the Federal Communications Commission at 1-888-225-5322 (TTY: 1-888-835-5322)

or visit the Commission's digital television website at: www.DTV.gov.

Information about the DTV transition –after June 12 2009, a television receiver with only an analog

broadcast tuner will require a converter box to receive full power over the- air broadcasts with an

antenna because of the Nation's transition to digital broadcasting. Analog-only TVs should continue

to work as before to receiver low power, Class A or translator television stations an with cable and

satellite TV services, gaming consoles, VCRs, DVD players, and similar products. For more information

about the DTV transition is available from http://www.DTV.gov or 1-888-CALL-FCC, and from

http://www.dtv2009.gov or 1-888-DTV-2009 for information about subsidized coupons for digital-to-

analog converter boxed.

21. Tilt/Stability – All televisions must comply with recommended international global safety standards

for tilt and stability properties of its cabinets design.



Do not compromise these design standards by applying excessive pull force to the front, or top,

of the cabinet, which could ultimately overturn the product.



Also, do not endanger yourself, or children, by placing electronic equipment/toys on the top

of the cabinet. Such items could unsuspectingly fall from the top of the set and cause product

damage and/or personal injury.

22. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as

recommended by the manufacturer.

23. Power Lines – An outdoor antenna should be located away from power lines.

24. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the

antenna system is grounded so as to provide some protection against voltage surges and built

up static charges. Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of the mats and supporting structure grounding of the

lead-in wire to an antenna-discharge unit, size of grounding connectors, location of antenna discharge

unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure

below.

ANTENNA

ANTENNA DISCHARGE UNIT

GROUNDING CONDUCTORS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

GROUND CLAMPS

ELECTRIC SERVICE EQUIPMENT

GROUND CLAMP

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE

Note to the CATV system installer: This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be connected to the 6 English grounding system of

the building, as close to the point of cable entry as practical. Please, make sure to connect the power

plug to the wall outlet socket after connecting the TV to the adapter!

7

SAVE THESE INSTRUCTIONS

Thank you for purchasing this Haier product. This easy-to-use manual will guide you in getting

the best use of your product. Remember to record the model and serial number. They are on the

label on the back of the unit.

Model number

Serial number

Date of purchase

Staple your receipt to your manual. You will need it to obtain warranty service.

8

TABLE OF CONTENT

DIGITAL TELEVISION TRANSITION NOTICE .......................................2

FOR YOUR SAFETY ........................................................................................ 3

PRECAUTIONS AND REMINDERS ...........................................................4

IMPORTANT SAFETY INSTRUCTIONS ...................................................5

PREPARATION .................................................................................................9

ATTACHING THE BASE .........................................................................................................9

PREPARING YOUR LCD HDTV FOR WALL MOUNTING ..........................................9

PERIPHERAL CONNECTION GUIDE ....................................................11

OPERATING INSTRUCTIONS ..................................................................13

USING THE SIDE PANEL CONTROL ............................................................................. 13

USING THE MENUS ............................................................................................................. 15

CHANNEL MENU ................................................................................................................ 15

VIDEO MENU ........................................................................................................................ 15

AUDIO MENU ....................................................................................................................... 16

FEATURE MENU .................................................................................................................... 16

VGA MENU ............................................................................................................................. 19

TIPS ........................................................................................................................................... 19

PRODUCT SPECIFICATION ......................................................................21

TROUBLESHOOTING ................................................................................. 23

GLOSSARY ...................................................................................................... 24

WARRANTY ..................................................................................................25

9

IMPORTANT: Do not apply pressure to the

screen display area which may compromise

the integrity of the display. The manufacturer’s

warranty does not cover user abuse or

improper installations.

ATTACHING THE BASE

IMPORTANT: The base of the HDTV must

be assembled prior to usage.

For L19C1120 / L22C1120 / L24C1180

1. Place the TV face down on a soft and

flat surface (blanket, foam, cloth, etc.) to

prevent any damage to the HDTV.

2. Carefully align and insert the base to the

stand.

3. Gently push the base towards the HDTV

until the locking mechanism locks into

place.

For L26C1120

1. Place the TV face down on a soft and

flat surface (blanket, foam, cloth, etc.) to

prevent any damage to the HDTV.

2. Carefully align and insert the base to the

stand.

3. Insert the screws to the bottom of the

base and tighten the base to the stand.

PREPARING YOUR LCD HDTV FOR

WALL MOUNTING

We suggest that you keep your TV at least 2.36

inches (60 mm) from the wall to prevent cable

interference.

Before mounting your TV on the wall, you need

to remove the base.

For your safety, please use only with UL listed

wall mount bracket with minimum weight of

the TV without stand. (Please see page 22.)

To attach a wall mount bracket to your TV:

For L19C1120 / L22C1120 / L24C1180

1. Remove the screws holding your TV to the

stand.

2. Remove the base stand from your TV.

3. Secure the wall mount bracket to the

back of your TV using four M4 screws, as

indicated in the illustration.

100 mm

For L26C1120

1. Remove the screws holding your TV to the

stand.

2. Remove the base stand from your TV.

3. Secure the wall mount bracket to the

back of your TV using four M6 screws, as

indicated in the illustration.

200 mm

100 mm

PREPARATION

10

NOTE

f

The wall mount bracket and the

screws are not included.

Please make sure to connect the power plug

to the wall outlet socket after connecting the

TV to the power cord!

1. Install the base stand; place the TV on

a solid surface.

Min

1 m

Ensure that the TV is placed in a position

to allow free flow of air. Do not cover the

ventilation openings on the back cover.

To prevent any unsafe situations, no naked

flame sources, such as lighted candles,

should be placed on or in the vicinity.

Avoid heat, direct sunlight and exposure to

rain or water. The equipment shall not be

exposed to dripping or splashing.

2. Connect the antenna cable or CATV cable

to the aerial socket ANT IN 75

:

at the

back of the TV set.

3. Remote control:

Remove the cover of the battery

compartment. Insert the included 2

batteries (Type AAA 1.5V).

4. Power:

Insert the power cord in the wall socket

with AC power supply. There is an LED

indicataor on the front panel. If the LED

color is Blue, it means the TV set is on. If

the LED color is Red, it means the TV set

is in standby mode.

5. Turn the TV on:

Press the Power key on the remote control

or the side panel control buttons. The TV

will turn on within a few seconds.

Power

Video Comp PC/HDMI TV

Power Key

11

PERIPHERAL CONNECTION GUIDE

For L19C1120 / L22C1120 / L24C1180

USB

U

SB

AC POWER

L19C1120 / L22C1120

L24C1180

L19C1120

L22C1120

L24C1180

For L26C1120

USB

AC POWER

L26C1120

1. HDMI – Connect the primary source for digital video such as a DVD player, bluray player or

set top box through this digital connector.

2. PC IN – Connect the video and audio cables from a computer here.

3. AV IN (AV/S-VIDEO) – Connect the input source for composite video devices, such as a

VCR or video game. Use the white and red connectors to connect the external audio from

the same source. The signal being carried by the S-Video cable and connector, if connected,

will take priority over the Video RCA connector (yellow connector).

12

4. COMPONENT (Y/Pb/Pr with Audio L/R) – Connect the primary source for component

video devices such as a DVD Player or set top box here. Use red for Pr, blue for Pb, green for Y,

red for right audio (R) and white for left audio (L) inputs.

5. ANTENNA/CABLE DIGITAL/ANALOG – Connect to an antenna or digital cable (out-

of-the-wall, not from Cable Box) for Digital TV.

6. SPDIF (Optical Digital Audio Out) – When a digital audio signal is associated with the

input selected for viewing, the digital audio will be available on this SPDIF connection to

your home theater system.

7. USB PORT – Insert a USB storage device to the USB port to view photos or listen to

music.

8. Earphone Output – Connect to headphones. When the headphone is inserted to the plug,

the speakers will be muted.

Once your equipment is connected, use the following procedure to view the input signal:

Press the Source button on the remote control to select the relevant source to view. (ex: Press Comp

button to select “Component” if you have connected a device to the Component socket.)

13

OPERATING INSTRUCTIONS

USING THE SIDE PANEL CONTROL

1

2

3

5

6

4

7

1 VOL + Press to increase the sound volume level.

2. VOL - Press to decrease the sound volume level.

3. CH



Press to select the next higher program number.

4. CH



Press to select the next lower program number.

5. MENU Press to open or exit the OSD (on-screen display) menu.

6. INPUT Press to select the input source.

7.

i

POWER

Press to turn on / off (standby) the TV set.

14

USING THE REMOTE CONTROL

Power

Press to power ON/OFF (standby)

TV.

Note: TV is never completely

powered off unless physically

unplugged.

Video

Press repeatedly to choose S-Video/

Composite source mode.

Comp

Press to choose Component source

mode.

PC/HDMI

Press repeatedly to choose VGA or

HDMI source mode.

TV

Press to choose ATSC/NTSC TV

source mode.

0 ~ 9 /

–

number

Press to enter TV channel number

to select channel (Press ‘-’ to

choose the sub-channel).

PREV CH

Press to display the previous

channel.

Sleep

Press to set the preset time to

switch the TV to standby mode

automatically (off / 5 / 10 / 15 / 30 /

60 / 90 / 120 / 180 /240 mins).

Freeze

Press to freeze the displayed

picture.

MTS/SAP

Press to activate the NTSC TV

sounds, such as: Stereo, SAP or

Mono tone, and languages of DTV.

Wide

Press to choose the display aspect

ratio: Normal, Zoom1, Wide,

Zoom2, or HDMI PC mode (Only

for HDMI Video Source).

Fav Press "Fav" to open the

Favorite Channel List.

Power

Video

123

456

789

0

PREV CH

Comp PC/HDMI TV

Sleep

Fav Source

Mute

Menu Exit

ENTER

V-Chip

Video Adj Audio Adj

C.C.

Info

VOLCH

EPG

Freeze MTS/SAP

Source

Press "Source" to open the Source

List.

EPG

Press to display the Electronic

Program Guide.

CH+ / CH -

Press + or - to browse through the

TV channels.

Mute

Switch the sound ON/OFF.

Info

Press to show the information

about the input source, TV channel,

display resolution and current time.

VOL+ / VOL-

Press + or - to adjust the volume.

Menu

Press to open or exit menu.

<

,

>

, <, >, ENTER

Press to adjust the various function

items on the menu.

Exit

Press to exit menu or OSD.

V-Chip

Press to lock Parental Control

temporarily. (After setting the

restricted table of MPAA or TV

Rating.)

Video Adj

Press repeatedly to switch the

video mode: Standard, Eco, Movie,

Personal, Vivid.

Audio Adj

Press repeatedly to switch the audio

mode: Personal, Music, Speech.

C. C.

Press repeatedly to change the

closed caption type : CC On, CC

Off, CC On With Mute.

15

USING THE MENUS

1. Press the Menu button to display or close

the main menu.

2. Use the Navigation Ring to move

around, select, adjust or confirm an item in

the OSD (On Screen Display) menu.

Press the Menu button to enter the main

OSD. Adjust the items including Video menu,

Audio menu, Feature menu, Channel

menu, and VGA menu. However, some

options in the menus may only be enabled in a

particular source mode.

CHANNEL MENU

The Channel menu in TV mode is shown

below.

ENTER

ExitMenu

CHANNEL

Move Select Return Exit

Channel Strength

Auto CH Search

Channels List

Add on CH Search

Channel Labels

FAV Channel Setting

Air

Tuning Band

1. Tuning Band: Select TV source signal

from the Air (antenna) or Cable (CATV).

2. Channel Strength: Show the intensity of

the received DTV signal.

3. Auto CH Search: Automatically scan

all NTSC / ATSC TV channels and then

store them in the channel table. During the

channel scan process, the OSD will display

the number of channels which have been

found.

4. Add on CH Search: Rescan and add

channels which are newly found.

5. Channels List: Show the Channels List.

You can select which channels are viewable.

6. Channel Labels: Shows the NTSC /

ATSC TV Channel Labels. You can edit the

labels.

7. FAV Channel Setting: Show the Favorite

Channel List. You can add/remove channels

from the favorites list.

VIDEO MENU

The Video menu in most source modes

is shown below. It provides several video

adjustment items for fine tuning the video

display. Only in VGA source mode, the Video

menu provides: Picture mode, Brightness,

Contrast, Color Temp, Noise Reduction,

Backlight, Aspect Ratio and Preset.

ENTER

ExitMenu

VIDEO

Move Select Return Exit

Brightness

Contrast

Color

Sharpness

Tint

Color Temp

Vivid

62

50

30

40

0

Cool

Picture Mode

1. Picture Mode: Adjust the best picture

appearance from selecting the preset value

of Vivid, Standard, Eco, Movie, or Personal.

2. Brightness: Video brightness adjustment,

the tuning range is 0 ~ 100.

3. Contrast: Video contrast adjustment, the

tuning range is 0 ~ 100.

4. Sharpness: Video sharpness adjustment,

the tuning range is 0 ~ 100.

5. Color: Video color chroma adjustment,

the tuning range is 0 ~ 100.

6. Tint: Video tint adjustment, the tuning

range is R50 ~ G50.

7. Color Temp: Three color temperature

modes. (Normal / Warm / Cool)

8. Noise Reduction: Gives four NR effect

degrees, such as: Low, Mid, High and Off.

9. Adaptive Contrast: Choose On or Off

to adjust the gamma after analyzing the

input signal automatically.

10. Backlight: Backlight strength adjustment,

the tuning range is 0 ~ 30.

11. Aspect Ratio: Choose the display aspect:

Normal, Zoom1, Wide, Zoom2, or HDMI

PC mode (Only for HDMI Video Source).

12. Preset: Restore the default video settings.

16

AUDIO MENU

The Audio menu in TV mode is shown below.

The audio language setting is only available

with the NTSC (analog) TV source. The option

is disabled in other source modes.

ENTER

ExitMenu

AUDIO

Sound Mode

Bass

Treble

Audio Language

Balance

32

0

SPDIF

Speaker

Move Select Return Exit

Personal

English

PCM

On

1. Sound Mode: Choose the audio mode:

Personal, Music, or Speech.

2. Bass: Bass tone adjustment, the tuning

range is 0 ~ 63.

3. Treble: Treble tone adjustment, the tuning

range is 0 ~ 63.

4. Balance: Audio balance adjustment, the

tuning range is L50 ~ R50.

5. Audio Source: Select the audio source

from Mono, Stereo, or SAP. (This function

works in ATV only.)

6. Audio Language: Change the audio

language setting on ATSC TV programs. The

number of the supported audio languages

depends on the ATSC TV programs. (English

/ Français / Español)

7. SPDIF: Digital audio output format. Select

from RAW and PCM. (This function works

in DTV only.)

8. Speaker: Choose to turn on / off the

TV's intergrated speakers. The digital audio

output signals and earphone output signals

will not be turned off even though the TV

speaker is off. The default setting is On.

9. AVL: Choose On or Off to adjust volume

to be consistent across programs and

channels automatically.

10. Preset: Restore the default audio settings.

FEATURE MENU

The Feature menu in TV mode is shown below.

Certain features will be hidden (disabled) in

the menu depending on the mode.

ENTER

ExitMenu

FEATURE

Move Select Return Exit

Time

Password Setting

Menu Language

English

Closed Captions

Parental Control

Analog Captions

Digital Captions

SERVICE1

CC1

Off

1. Menu Language: Select the menu display

language. (English / Français / Español)

2. Time: Set current time. The sub-menu

includes Time Mode, Time Zone, and

Daylight Savings.

[Time Mode] – Choose from Auto or

Manual.

[Time Zone] – Set current time zone.

[Daylight Savings] – Set to On or Off.

ENTER

ExitMenu

FEATURE Time

Time Mode

Time Zone

Daylight Savings

Month

Day

Time

Year

Auto

HST

On

2010

Jan

1

12:02 AM

Move Select Return Exit

3. Password Setting: Change the 4-digit

parental control password. Three steps are

required for changing the password: Enter

Old Password -

>

Enter New Password -

>

Confirm New Password. Note: This item is

only available in TV, Composite and S-Video

source modes. The default password is

ό

0 0 0 0

ύ

.

17

Enter Old Password

Enter New Password

Confirm New Password

4. Parental Control: Provide the parental

Control (V-chip) function setting. Before

entering the Parental Control sub-menu,

enter the password first. Then the user can

modify the MPAA or TV Rating table to

restrict viewing of certain programs.

Note: This feature is only available in TV,

Composite and S-Video source modes.

(The default password is: 0 0 0 0.)

Enter Password

ENTER

ExitMenu

FEATURE Parental Control

Move Select Return Exit

Button Lock

Block Unrated TV

USA Parental Locks

Open V-Chip

Canadian Parental Locks

Off

[Button Lock] – Select On or Off to

lock or unlock the control buttons on the

side panel of the TV. When this function

is enabled, the control buttons on your

TV will be locked and the TV can only be

controlled by the remote control.

[Block Unrated TV] – When Block

Unrated TV is set to on, your TV will block

unrated programs.

[USA Parental Locks] – Set the parental

control level by the MPAA or TV Rating.

[Canadian Parental Locks] – Set the

parental control level by English Rating or

French Rating.

[Open V-Chip] – Open V-Chip is an

advanced V-Chip rating system for digital

channels that are received.

The rating table will rate programs using

RRT5 rating information.

5. Closed Captions: Select a closed caption

option. (Off / On / With Mute)

6. Analog Captions: Select an analog

caption option. (CC 1-4 / TEXT 1-4)

7. Digital Captions: Select a digital caption

option. (SERVICE 1-6)

8. Digital Captions Setup: Provides

numerous options for setting the digital

closed caption style in the sub-menu.

Note: This feature is only available in Digital

TV (ATSC) mode.

[Style] – Set to Automatic or Customer

mode. If Customer mode is selected, you

can modify the detail styles as described

below. The setting result will be shown

immediately on the bottom of the sub-

menu OSD.

[Size] – Digital closed caption font size,

which can be set to Automatic, Small,

Normal, or Large.

[Font] – Digital closed caption font style,

which can be set to Automatic, Default, or

Font 1 ~ 7.

[Text Color] – Automatic / White / Red

/ Green / Blue / Yellow / Magenta / Cyan /

Black.

[Text Opacity] – Automatic / Solid /

Flashing / Transparent / Translucent.

[Background Color] – Automatic /

Black / White/ Red / Green / Blue / Yellow /

Magenta / Cyan.

[Background Opacity] – Automatic /

Solid / Flashing / Transparent / Translucent.

[Edge Effect] – Automatic / None

/ Raised / Depressed / Uniform / Left

18

Shadow / Right Shadow.

[Edge Color] – Automatic / Red / Green

/ Blue / Yellow / Magenta / Cyan / Black /

White.

9. Input Labels: This option is available only

for non-TV sources.You can edit the input

labels.

10. Component Setting: This option only

shows and is available in component mode,

which provides fine tuning the component

display.

[Phase] – Adjust Picture Phase to reduce

Horizontal-Line noise. The tuning range is

from 0 to 31.

[Preset] – Restore the default component

setting values.

11. MultiMedia Menu: This option shows the

photos in JPEG formats and plays the music

in MP3 formats that are stored on a USB

storage device.

Note: File number is limited to 1000 files.

JPEG sizes are limited as followed:

For 19"/22"/26": 10928x6114

For 24": 15360x8640

There are two ways to enter JPEG Viewer

and MP3 MusicBox interface:

After a plugging USB storage device into

the USB port, the Multimedia List menu

will be displayed.

Multimedia List

1. JPEG Viewer

2. MP3 MusicBox

Exit

Select MultiMedia Menu in the Feature

Menu to choose JPEG Viewer or MP3

MusicBox. These two items are activated

only if the USB storage device is plugged

into the USB port.

ENTER

ExitMenu

FEATURE

Move Select Return Exit

Digital Captions

Digital Captions Setup

Analog Captions

English

Component Setting

Input Labels

MultiMedia Menu

Reset To Default

[JPEG Viewer] – Press Menu to display

the control menu. Press Enter to enlarge

the selected photo (orange frame) in

browser.

Image Delay: Set the display time for

each picture in the slide show mode.

There are three options: Fast, Slow, and

Normal.

Music On Slide Show: Enable

background Music during the slide show.

It will play the MP3 files in sequence in

the current folder repeatedly. The Music

On Slide Show item will be grayed out

if there are no MP3 files in the current

folder.

Start Slide Show: Enter Slide Show

mode.

Rotate Photo: Rotate selected picture.

(0/90/180/270)

Back to Upper Folder: Return to the

upper folder.

Back to Root Folder: Return to the

root folder.

Back To Browser: Return to Browser

mode. (Photo page with control menu.)

Exit: Exit JPEG Viewer and return to

original source. (Browser with Control

menu.)

[MP3 MusicBox]

ListInfoBar (at the bottom): This

part contains play list information:

“Current Directory”, “Total File(s)”,

“Total Folder(s)”, “Current Item” in

current directory and Key Help Bar.

PlayList (on the right side): This part

contains MP3 music files.

19

Control Panel (on the left side):

Bass, Treble, Balance, Volume: Adjust

the audio tone.

Mute Screen: This provides an option

for enabling (On) or disabling (Off)

the auto turn-off of the backlight while

playing MP3 media. This setting is valid

in MP3 media player interface only.

After setting to On, the backlight will be

turned-off automatically after 10 seconds

if no key is pressed. Press any key to turn

the screen back on. If no key is pressed

after 10 seconds, the screen will be

turned off again.

Preset: Resets all MP3 settings to the

default values.

Exit MP3MusicBox: Exit the

MP3MusicBox interface.

12. Reset to Default: Restore all the default

settings.

VGA MENU

This option is only shown and available in VGA

mode, which provides several items for fine

tuning the VGA display.

1. H-Position: Adjust the horizontal position

of the picture. (0-40)

2. V-Position: Adjust the vertical position of

the picture. (0-16)

3. Clock: Adjust picture clock to reduce

Vertical-Line noise. (0-16)

4. Phase: Adjust picture phase to reduce

Horizontal-Line noise. (0-31)

5. Auto Adjust: Adjust the settings

automatically.

6. Preset: Restore the default VGA setting

values.

TIPS

Care of the screen

Do not rub or strike the screen with anything

hard as this may scratch, mar, or damage the

screen permanently.

Unplug the power cord before cleaning the

screen. Dust the TV by wiping the screen

and the cabinet with a soft, clean cloth. If the

screen requires additional cleaning, use a clean,

damp cloth. Do not use liquid cleaners or

aerosol cleaners.

Mobile telephone warning

To avoid disturbances in picture and sound,

malfunctioning of your TV or even damage to

the TV, keep away your mobile telephone from

the TV.

End of life directives

We are paying a lot of attention to produce

environmental friendly products. Your new

television contains materials, which can be

recycled and reused.

At the end of its life, specialized companies

can dismantle the discarded receiver to

concentrate the reusable materials and to

minimize the amount of materials to be

disposed of.

Please ensure you dispose of your old

receiver according to local regulations.Haier

is committed to safely recycling electronic

products and product materials. Please check

for a local recycling location in the United

States at : 1800RECYCLING.COM or call

1.800.RECYCLING.

Dolby License Notice and Trademark

Acknowledgement

Manufactured under license from Dolby

Laboratories.

Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Regulatory Notices – Federal

Communications Commission Notice

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

20

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference

by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and the TV.

 Connect the equipment into wall power

outlet on a circuit different from that to

which the receiver is connected.

 Consult the dealer or an experienced radio

or television technician for help.

Modifications

The FCC requires the user to be notified that

any changes or modifications made to this

device that are not expressly approved by

our company may void the user’s authority to

operate the equipment.

Cables

Connections to this device must be made with

shielded cables with metallic RF/EMI connector

hoods to maintain compliance with FCC Rules

and Regulations.

Canadian notice

This Class B digital apparatus meets all

requirements of the Canadian Interference-

Causing Equipment Regulations.

Avis Canadian

Cat apparel numerous de la classed B

respected toutes les exigencies du règlement

sur le materiel brouilleur du Canada.

La page charge ...

Haier L19C1120 Le manuel du propriétaire

Ce manuel convient également à

Haier L19C1120 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents