Lenco SCD-685 Manuel utilisateur

Model SCD-685BK

User manual – Portable DAB+/FM radio with CD MP3, Bluetooth, USB and SD player

Gebruikshandleiding – Draagbare DAB+/FM-radio met CD MP3, Bluetooth, USB- en SD-speler

Bedienungsanleitung – Tragbares DAB+/FM-Radio mit CD/MP3-, Bluetooth-, USB- und SD-Player

Mode d’emploi – Radio DAB+/FM portative avec CD MP3, Bluetooth, USB et lecteur de carte SD

Manual de usuario – Radio DAB+/FM portátil con CD MP3, Bluetooth, USB y reproductor SD

2

Index

English .................................................................................................................................................................................... 3

Nederlands ........................................................................................................................................................................... 16

Deutsch................................................................................................................................................................................. 29

Français ................................................................................................................................................................................. 43

Español ................................................................................................................................................................................. 56

3

English

SCD-685BK

CAUTION:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space

around the whole device.

4. Install in accordance with the supplied user manual.

5. * Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point.

Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s

reach! When playing with the power cable, they can seriously injure themselves.

6. * Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating

products or naked flame.

8. Avoid using the device near strong magnetic fields.

9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following

the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the

product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do

not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it

is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up

of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket

immediately.

14. This device must operate on a power source as specified on the specification label. If you are not sure of the type of

power supply used in your home, consult your dealer or local power company.

15. * The socket outlet must be installed near the equipment and must be easily accessible.

16. * Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.

17. * Devices with class 1 construction should be connected to a main socket outlet with a protective earthed

connection.

18. * Devices with class 2 construction do not require a earthed connection.

19. Keep away from rodents. Rodents enjoy biting on power cords.

20. * Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a

short circuit.

21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

22. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you

may use a damp cloth with dilute detergent.

23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or

battery replacement.

24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be

corrupted or lost.

25. If the unit has USB playback function, the usb memory stick should be plugged into the unit directly. Don’t use an

usb extension cable because it can cause interference resulting in failing of data.

26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such

as vases, are placed on or near the apparatus.

27. * To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains,

as the disconnect device is the mains plug of apparatus.

28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

29. Attention should be drawn to the environmental aspects of battery disposal.

30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.

31. The rating label has been marked on the bottom or back panel of the apparatus.

32. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a

lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct

use of the device by the person who is responsible for their safety.

4

33. This product is intended for non professional use only and not for commercial or industrial use.

34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or

by failure to follow any other warning or precaution contained within this user manual will not be covered by

warranty.

35. Never remove the casing of this apparatus.

36. Never place this apparatus on other electrical equipment.

37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.

38. Do not allow children access to plastic bags.

39. Only use attachments/accessories specified by the manufacturer.

40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the

apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

41. * Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

42. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.

• * Do not connect the unit to the mains before checking the mains voltage and before all other connections have

been made.

* Those instruction are related only to products using power cable or AC power adaptor.

5

FRONT & TOP

1. IR RECEPTION WINDOW

2. DISPLAY

Display the unit operation status and information

3. CD DISC COMPARTMENT DOOR

4. VOL +/VOL -

Adjust the main volume

5. FOLDER+/10+

CD/USB/SD:

During playback, press to search to the current track number increase by 10

Press and hold will search to the next folder (folder up)

6. PRESET/RANDOM

DAB/FM:

Press to enter the preset channel recall operation

Press and hold to enter the preset channel storage operation

CD/USB/SD: During playback, press to start the random playback. Press again will return to normal playback

7. SELECT

Press to select the change setting in the menu operation

8. MENU

Press to enter the Menu for setting change

6

9. PROGRAM/REPEAT

CD/USB/SD:

During playback, press to start the repeat playback operation

In stop mode, press to enter the program playback setup

10. INFO

DAB/FM: Press to display station information

CD/USB/SD: During MP3 playback, press to display the folder/track number or track/playing time

11. STOP

Press to stop the CD/USB/SD playback operation

12. /PAIR

CD/USB/SD/BT: Press to toggle between pause and resume playback operation.

BT: Press and hold will disconnect the current connection and start to search another new Bluetooth device

13. STANDBY/SOURCE

Press to turn on the unit. Press and hold to turn off and go to Standby mode

After the unit is turned on, press this key will choose different modes of operation: DAB/FM/CD/USB/SD/BT/AUX

14. SCAN

DAB: Press to start auto-scanning and store all available DAB stations

FM: Press to scan for the next available FM station

15. /TUN- and /TUN+

DAB: Press to display the next station information

FM:

Short press to tune to a different frequency

Press and hold to scan the next available station

CD/USB/SD/BT: During playback, press to search to the previous or next track

16. USB and SD CARD INPUT

17. TELESCOPIC ANTENNA

It should be extended to ensure a good DAB/FM reception

7

REAR & BOTTOM

1. AUX

Connect to external audio player

2. HEADPHONE OUT JACK

Connect to the external headphone

3. AC IN ~

Connect the power cable to this jack

4. BATTERY COMPARTMENT DOOR

8

REMOTE CONTROL

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

STANDBY

NUMERIC BUTTONS

PRESET

TUNE-

SCAN

RANDOM

FM ST/MO

BACKWARD

FORWARD

FOLDER +

10+

PAIR

REPEAT

PROGRAM

STOP

PLAY/PAUSE

TUNE+

ENTER/SELECT

INFO

MENU

MUTE

VOL -

VOL +

SOURCE

Remote Control Operation

A CR2025 battery is already installed in the remote control unit. Before using, pull out the battery insulation sheet as

shown below.

9

To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper

direction.

 If the remote control conﬂicts with other devices, the operation will be affected.

 Do not simultaneously press buttons on the unit and the remote control.

 Avoid using two remote controls at the same time as it will cause a malfunction.

 Use only CR-2025 size batteries.

 If there is battery leakage, clean the remote control thoroughly before replacing batteries.

 Do not short two terminals of the batteries. Dispose old batteries in a suitable place.

10

CONNECTING TO THE POWER SUPPLY

1. Connect the end of the detachable power cord to the unit rear panel AC IN ~ jack and the other end to the AC outlet.

2. Press the STANDBY button to turn on the unit.

DC CONNECTION

For DC operation, firstly remove the AC plug from the AC outlet and disconnect the AC cord from the AC IN ~ jack. Then

insert 6 pcs size C (UM-2) batteries into the battery compartment.

Since the unit will draw little power consumption even in Standby mode, it is suggested to uninstall the battery when it is

not used for a long time.

BASIC OPERATION

Press the STANDBY button to turn on the unit. To turn off, press and hold the STANDBY button again.

DAB/FM/CD/USB/SD/BT/AUX

Press the SOURCE button to select from different sources.

Volume Control

Press the VOL-/VOL+ buttons to change the volume.

Adjusting the Antenna

The telescopic antenna should be extended to ensure a good FM reception. Alter the antenna position for the best

reception.

DAB OPERATION

The first time the unit is in DAB mode, it will automatically scan for DAB available stations. Wait for a while until the

scanning is finished. The display will show the scanning progress. After scanning it will tune to the first station. Stations

are listed in numerical then alphabetic order. All stations scanned are stored. The next time the unit is turned on there will

be no automatic scanning.

Auto Scan

1. Turn on the unit in DAB mode.

2. Press the SCAN button to start auto-scanning the available stations.

Manual Scan

1. Turn on the unit in DAB mode.

2. Press MENU button to access the menu control.

3. Press the TUNE- or TUNE+ button until “Manual tune” is displayed and then press the ENTER button.

4. Press the TUNE- or TUNE+ button to select the desired channel (5A-13F).

5. To select another channel (5A-13F), press the TUNE- or TUNE+ button.

6. Press ENTER to confirm.

11

Tuning

Press the TUNE- or TUNE+ button to display the information of the next station. Then press the ENTER button to tune

to this station in few seconds.

Storing DAB Presets

You can save up to 20 DAB stations.

1. Tune to the station you wish to store.

2. Press and hold the PRESET button. Flashing preset channel number will be displayed.

3. Press the TUNE- or TUNE+ button to a preset number that you want to store. Then press the ENTER button to

save.

Recall DAB Presets

1. Press the PRESET button. Steady preset channel number will be displayed.

2. Press the TUNE- or TUNE+ button to a preset number that you want to recall. Then press the ENTER button to

tune to the preset channel.

Displaying DAB Station Information

There are several types of information as listed below. To change the display information, press the INFO button

repeatedly.

1. Radio Text scrolling

Comprises music titles or programme details provided by the broadcaster.

2. Program Type (PTY)

Type of programme provided by the broadcaster.

3. Multiplex Name

Displays name of multiplex to which the current station belongs.

4. Channel and Frequency

Channel number and frequency.

5. Audio Bit Rate

This is the current channel audio bat rate.

6. Signal Error Rate

It shows the error received. The larger this value the more the error received. To improve the reception adjust the

antenna position.

7. Time and Date

The real time and current date provided by the broadcaster.

OTHER DAB MENU OPERATIONS

Press the MENU button to access the menu control. Then press the TUNE- or TUNE+ button for different options as

described below.

Dynamic Range Control (DRC)

DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast

is set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables you to apply a

scaling factor to this level.

There are three levels of compression:

DRC High:

Maximum compression as sent with the transmitted service

DRC Low:

Set to 1/2 that of the sent transmitted service

DRC Off:

No compression

1. Press the MENU button to access the menu control.

2. Press the TUNE- or TUNE+ button until “DRC” is displayed and then press the ENTER button.

3. Press the TUNE- or TUNE+ button to select the DRC value and then press the ENTER to confirm.

4. Press the MENU button to exit the menu control.

Note:

- Not all DAB broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in

the unit will have no effect.

- After you have adjusted the DRC level the sound may be louder.

Prune

This function removes inactive stations.

1. Press MENU button to access the menu control.

2. Press the TUNE- or TUNE+ button until “Prune” is displayed and then press the ENTER button to prune the unit.

3. Press the MENU button to exit the menu control.

12

FM RADIO OPERATION

Auto Scan

1. Turn on the unit in FM mode.

2. Press the SCAN button to scan for the next available FM station.

Manual Scan

1. Press the TUNE- or TUNE+ button repeatedly to tune to a different frequency.

2. Alternatively press and hold the TUNE- or TUNE+ button to automatically search to the next available station.

Storing FM Presets

You can save up to 20 FM stations.

1. Tune to the station you wish to store.

2. Press and hold the PRESET button. Flashing preset channel number will be displayed.

3. Press the TUNE- or TUNE+ button to a preset number that you want to store. Then press the ENTER button to

save.

Recall FM Presets

1. Press the PRESET button. Steady preset channel number will be displayed.

2. Press the TUNE- or TUNE+ button to a preset number that you want to recall. Then press the ENTER button to

tune to the preset channel.

Stereo/Force Mono Selection

When receiving a stereo broadcast FM station, press the FM ST/MO button will switch between stereo audio or force

mono audio.

Displaying FM Station Information

There are several types of information as listed below. To change the display information press the INFO button

repeatedly.

1. Radio Text

Scrolling text with information on music titles or program details provided by the broadcaster.

2. Program Type (PTY)

Type of program provided by the broadcaster.

3. Signal Strength

The signal strength bar is displayed to show the current receive signal strength. The more the rectangles are filled, the

stronger the signal is received. The unfilled rectangle on the left side is a threshold level where the signal strength

received should exceed this threshold. To improve the reception adjust the antenna position.

4. Time and Date

The real time and current date provided by the broadcaster.

5. Frequency

Current channel frequency.

OTHER FM MENU OPERATION

Press the MENU button to access the menu control. Then press the TUNE- or TUNE+ button for different options as

described below.

Scan Setting

1. Press the MENU button to access the menu control.

2. Press the TUNE- or TUNE+ button until “Scan setting” is displayed and then press the ENTER button.

3. Press the TUNE- or TUNE+ button to toggle between “All stations” or “Strong only” selections and then press the

ENTER button confirm. When “All stations” is selected, all stations will be detected during FM scanning even if the

radio station is noisy. When the “Strong only” is selected, only the strong stations are detected. Scanning will ignore

those noisy stations.

4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.

5. Press the MENU button to exit the menu control.

Audio Setting

1. Press the MENU button to access the menu control.

2. Press the TUNE- or TUNE+ button until “Audio Mode” is displayed and then press the ENTER button.

3. Press the TUNE- or TUNE+ button to toggle between “Stereo” or “Mono” selection and then press the ENTER

button confirm.

4. Press the MENU button to exit the menu control.

13

CD/USB/SD OPERATION

Loading and Playing CD Disc

Open the CD door. Install a disc with the CD graphic side facing up. Close the CD door. Press the SOURCE button to CD

mode. After reading the total number of tracks will be shown on the display. Press the PLAY/PAUSE button to play.

Reading and Playing USB Device

Insert a USB device into the USB input jack. Press the SOURCE button to USB mode. After reading the total number of

tracks will be shown on the display. Press the PLAY/PAUSE button to play.

Reading and Playing SD Card

Insert a SD card device into the SD card input jack. Press the SOURCE button to SD Card mode. After reading the total

number of tracks will be shown on the display. Press the PLAY/PAUSE button to play.

Play/Pause Control

To pause playback press the PLAY/PAUSE button. Press the button again to resume playback.

Stop Control

To stop playback press the STOP button.

Skip Track

During playback press the PREVIOUS or NEXT button to search to the previous or next track.

Random Play

During playback press the RANDOM button to play music in random order. The display will show “Random”. Press the

RANDOM button again to resume normal playback.

High-Speed Music Search

During playback press & hold the BACKWARD or FORWARD button to start high-speed searching. When you

release the BACKWARD or FORWARD button normal speed playback will resume.

Repeat Playing

During playback press the REPEAT button once the display shows “Rpt.1”. The current track will be played repeatedly.

Press the REPEAT button again the display shows “Rpt.all”. All tracks will be played repeatedly. Press the REPEAT

button again to resume normal playback.

In case of MP3 file folder playback, there is a repeat folder as well and the display will show “Rpt.folder”.

Folder Up (MP3 file only)

During MP3 playback press the FOLDER + button on the remote control (or press and hold the FOLDER+ button on the

unit) to search to the next folder (folder up).

In stop mode press the FOLDER + button on the remote control (or press and hold the FOLDER+ button on the unit) to

change the folder. Then press the PREVIOUS or NEXT button to select your desired track to play. Press the

PLAY/PAUSE button to start playback the track.

Programmed Playback

This unit can be programmed to play any sequence of up to 20 tracks.

1. In stop mode press the PROGRAM button on the remote control. “P01” will be shown on the display.

2. Press the PREVIOUS or NEXT button to select the desired track.

3. Press the PROGRAM button to save the desired track.

4. Repeat steps 2-4 to program up to 20 tracks.

5. Press the PLAY/PAUSE button to play according to the programmed track.

6. To clear program play press the STOP button twice or change to another mode.

7. During program play you can also do the repeat one or repeat all operation. But during program play, random play is

not supported.

14

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.

1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT”. It will start searching

and will keep flashing.

2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and

the Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the

search until “Lenco SCD-685” is found. Select “Lenco SCD-685” on the Bluetooth device to make connection. Enter

the pass code “0000” if required.

3. After successfully paired the unit will display steady “BT” without flashing.

4. You can now start playing music from your smartphone wirelessly to the speaker.

5. You can press the button to pause or resume the playback.

6. You can press the PREVIOUS or NEXT button to search to the previous or next song.

 Press the PAIR button on the remote control (or press and hold the PAIR button on the unit) will disconnect the

current connection and start to search another new Bluetooth device

AUX IN

This allows you to connect an external player’s sound through your unit.

1. Plug a 3.5mm audio cable (not included) into your external player’s line out and the other end into the AUX jack.

2. Press the SOURCE button to enter AUX mode. Display shows “AUX”

3. Start your external player to play music.

4. The unit will output the sound.

ENERGY SAVING

Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once

no music has been playing around 15 minutes.

To reactivate the unit, press the STANDBY button to turn on the unit.

CLOCK SETUP

You can set the clock.

1. Turn off the unit to Standby mode.

2. Press and hold the MENU button, it will show the time display format.

3. Press the TUNE- or TUNE+ button to toggle between 24Hour or 12 Hour display format. Press the MENU button

to continue.

4. The Hour digits will flash. Press the TUNE- or TUNE+ button to change the hour value. Press the MENU button to

continue.

5. The Minute digits will flash. Press the TUNE- or TUNE+ button to change the minute value. Press the MENU

button to complete the setup.

 The clock setting may automatically be overridden by the DAB or FM station broadcast real time information.

SOFTWARE VERSION CHECK

You can check the unit software version.

1. Turn on the unit in DAB mode or FM mode.

2. Press the MENU button to access the menu control.

3. Press the TUNE- or TUNE+ button until “SW Version” is displayed and then press the ENTER button to show the

software version number.

4. Press the MENU button to exit the menu control.

LANGUAGE SETUP

You can set the unit’s language.

1. Turn on the unit in DAB mode or FM mode.

2. Press the MENU button to access the menu control.

3. Press the TUNE- or TUNE+ button until “Language” is displayed and then press the ENTER button.

4. Press the TUNE- or TUNE+ button to toggle between different languages. Select your desired language and then

press the ENTER button to confirm.

5. Press the MENU button to exit the menu control.

FACTORY RESET

This function resets the unit to the original factory settings.

1. Turn on the unit in DAB mode or FM mode.

2. Press the MENU button to access the menu control.

3. Press the TUNE- or TUNE+ button until “Factory Reset” is displayed and then press the ENTER button.

4. Press the TUNE- or TUNE+ button until “<Yes>” is displayed and then press the ENTER button to reset the unit.

15

ACCESSORIES

 Power cable x 1

 Remote control x 1

 Instruction manual x 1

TECHNICAL SPECIFICATIONS

DAB+ radio frequency range

174.928-239.2 MHz

FM radio frequency range

87.5-108 MHz

AC power input

230V~, 50Hz

Power consumption

Batteries Operation

22 W

6 x UM2 (C Size)

Speaker output power

2 x 5 W

Bluetooth

V2.1 + EDR

USB

SD

Aux In

USB 2.0 type A socket

Full size SD card slot

3.5mm stereo jack

Headphone out

3.5mm stereo jack

Remote control battery

CR2025 x 1pcs

Dimension (L x D x H)

372 x 160 x 273 mm

Weight

2.4 kg

 The specification presents only as a reference. The value of weight and size are approximation.

 Our product is improved ceaselessly and the specification and function may be changed without prior notice.

GUARANTEE

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and

after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.

Important note: If this unit is opened or accessed by a non-offcial service center in any way, the warranty expires.

This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer

will be voided.

DISCLAIMER

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, speciﬂcations

and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for

illustration purposes only and may not apply to a particular situation. No legal right or entitlements may be obtained from

the description made in this manual.

DISPOSAL OF THE OLD DEVICE

This symbol indicates that the relevant electrical product or battery should not be disposed of as

general household waste in Europe. To ensure the correct waste treatment of the product and battery,

please dispose them in accordance to any applicable local laws of requirement for disposal of electrical

equipment or batteries. In so doing, you will help to conserve natural resources and improve standards

of environmental protection in treatment and disposal of electrical waste (Waste Electrical and

Electronic Equipment Directive).

SERVICE

For more information and helpdesk support, please visit www.lenco.com

Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

16

Nederlands

SCD-685BK

LET OP:

Gebruik van bedieningen of afstellingen of uitvoer van procedures anders dan gespecificeerd in deze documentatie kan

leiden tot blootstelling aan schadelijke straling.

Dit apparaat dient uitsluitend te worden aangepast of gerepareerd door gekwalificeerd onderhoudspersoneel.

VOORZORGSMAATREGELEN VOOR GEBRUIK

ONTHOUD DE VOLGENDE INSTRUCTIES:

1. Gebruik dit apparaat niet in de buurt van water.

2. Reinig het uitsluitend met een licht vochtige doek.

3. Bedek of blokkeer de ventilatie-openingen niet. Wanneer u het apparaat op een schap plaatst, dient u 5 cm (2”)

vrije ruimte rondom het gehele apparaat te behouden.

4. Installeer het product volgens de meegeleverde gebruikershandleiding.

5. *Nooit op de stroomadapter stappen of deze indrukken. Wees voornamelijk voorzichtig in de buurt van de stekkers

en het punt waar de kabel uit het apparaat komt. Plaats geen zware voorwerpen op de stroomadapter, om

beschadiging ervan te voorkomen. Houd het gehele apparaat buiten bereik van kinderen! Wanneer kinderen met

de voedingskabel spelen, kunnen zij ernstig letsel oplopen.

6. *Haal de stekker uit het stopcontact tijdens onweer of wanneer u deze langere tijd niet gebruikt.

7. Houd het apparaat uit de buurt van hittebronnen, zoals radiatoren, verwarmingen, kachels, kaarsen en andere

hittegenererende producten of naakte vlam.

8. Gebruik dit apparaat niet in de buurt van krachtige magnetische velden.

9. Elektrostatische ontlading kan normaal gebruik van dit apparaat verstoren. U hoeft het apparaat in dit geval slechts

te resetten en opnieuw op te starten volgens de gebruikershandleiding. Wees voorzichtig tijdens

bestandsoverdracht en doe dat in een omgeving zonder statische verstoringen.

10. Waarschuwing! Steek nooit een voorwerp via de ventilatie- of andere openingen in het product. Er is hoogspanning

in het product aanwezig en als u er een object insteekt, kan dat een elektrische schok veroorzaken en/of

kortsluiting in de interne onderdelen. Mors om dezelfde reden geen water of vloeistof op het product.

11. Gebruik het toestel niet in vochtige ruimtes, zoals badkamers, stomende keukens of in de buurt van zwembaden.

12. Gebruik dit apparaat niet wanneer condensatie kan optreden.

13. Alhoewel dit apparaat met grote zorg gefabriceerd en verschillende keren geïnspecteerd is voordat het de fabriek

verlaat, is het nog steeds mogelijk dat er problemen optreden, zoals met alle elektrische apparaten. Als u rook, een

overmatige hitteontwikkeling of enig ander onverwacht verschijnsel opmerkt, moet u onmiddellijk de stekker van

het netsnoer uit het stopcontact halen.

14. Dit apparaat moet aangedreven worden door een voedingsbron, zoals aangegeven op het specificatieplaatje. Als u

twijfelt over het type voeding dat gebruikt wordt in uw huis, raadpleeg dan a.u.b. uw dealer of plaatselijk

energiebedrijf.

15. *Het stopcontact moet in de buurt van de apparatuur zijn geïnstalleerd en eenvoudig te bereiken zijn.

16. *Overbelast stopcontacten of verlengsnoeren niet. Overbelasting kan brand of een elektrische schok veroorzaken.

17. *Apparaten met een Klasse 1 structuur dienen te worden aangesloten op een stopcontact met een beschermende

aardverbinding.

18. *Apparaten met een Klasse 2 structuur vereisen geen aardverbinding.

19. Houd ze uit de buurt van knaagdieren. Knaagdieren knauwen graag aan voedingskabels.

20. *Houd altijd de stekker vast wanneer u deze uit het stopcontact trekt. Trek nooit aan de voedingskabel. Dit kan tot

een kortsluiting leiden.

21. Vermijd om het toestel te plaatsen op een ondergrond die blootgesteld kan worden aan trillingen of schokken.

22. Gebruik een zacht, droog doekje om het apparaat te reinigen. Gebruik geen oplosmiddelen of op benzine

gebaseerde vloeistoffen. U kunt een vochtig doekje met verdund schoonmaakmiddel gebruiken om hardnekkige

vlekken te verwijderen.

23. De leverancier is niet verantwoordelijk voor schade of verloren gegevens veroorzaakt door storing, misbruik,

modificatie van het apparaat of batterijvervanging.

24. Onderbreek nooit de verbinding wanneer het apparaat formatteert of bestanden overdraagt. De gegevens kunnen

anders corrupt of verloren raken.

25. Indien het apparaat een USB-afspeelfunctie heeft, moet de USB-geheugenstick rechtstreeks op het apparaat

worden aangesloten. Gebruik geen USB-verlengkabel, omdat die kan leiden tot storingen met foutieve gegevens als

gevolg.

26. Het apparaat mag niet worden blootgesteld aan druppels of spatten en zorg ervoor dat er geen met vloeistof

gevulde voorwerpen, zoals vazen, op of nabij het apparaat zijn geplaatst.

27. *Om de verbinding met de stroomaansluiting volledig te verbreken, moet de stekker van het apparaat uit het

stopcontact worden gehaald, omdat de stekker van het apparaat de hoofdschakelaar is.

28. Indien het apparaat op batterijen kan werken, dan mogen de batterijen niet aan overmatige hitte, zoals zonlicht,

open vuur e.d. worden blootgesteld.

17

29. Aandacht voor het milieu is nodig bij het verwijderen van de batterijen.

30. Het apparaat kan alleen worden gebruikt in gematigde klimaten. Extreem koude of warme omgevingen moeten

worden vermeden.

31. Het nominale specificatielabel is te vinden op het paneel aan de onder- of achterkant van het apparaat.

32. Dit apparaat is niet bestemd voor gebruik door mensen (inclusief kinderen) met fysieke, zintuiglijke of geestelijke

gebreken of gebrek aan kennis en ervaring, tenzij zij onder toezicht staan of instructies hebben over het juiste

gebruik van het apparaat hebben gekregen van de persoon die verantwoordelijk is voor hun veiligheid.

33. Dit product is alleen voor niet-professioneel gebruik bedoeld en niet voor commercieel of industrieel gebruik.

34. Verzeker u ervan dat het apparaat in een stabiele positie staat opgesteld. Schade, veroorzaakt door het gebruik van

dit product in een onstabiele positie, of door het niet naleven van waarschuwingen of voorzorgsmaatregelen

genoemd in deze handleiding, valt niet onder de garantie.

35. Verwijder nooit de behuizing van dit apparaat.

36. Plaats dit apparaat nooit op andere elektrische apparatuur.

37. Dit product niet gebruiken of opslaan op plaatsen waar het wordt blootgesteld aan direct zonlicht, hitte,

buitensporig veel stof of trillingen.

38. Geef kinderen geen gelegenheid in aanraking met plastic zakken te komen.

39. Gebruik uitsluitend uitbreidingen/accessoires gespecificeerd door de fabrikant.

40. Laat alle reparaties over aan gekwalificeerd onderhoudspersoneel. Onderhoud is vereist als het toestel hoe dan ook

is beschadigd, zoals bijvoorbeeld het netsnoer of de stekker, wanneer er vloeistof of een voorwerp in het apparaat

is terechtgekomen, wanneer het apparaat is blootgesteld aan regen of vocht, als het niet normaal werkt of is

gevallen.

41. *Gebruik nooit een beschadigde voedingskabel of stekker of een los stopcontact. Dit vormt namelijk een risico op

brand of elektrische schokken.

42. Langdurige blootstelling aan luid geluid van persoonlijke muziekspelers kan leiden tot tijdelijke of permanente

gehoorbeschadiging.

INSTALLATIE

• Pak alle onderdelen uit en verwijder de beschermende materialen.

• *Sluit het apparaat niet aan op het stopcontact, voordat u de netspanning hebt gecontroleerd en voordat alle

andere aansluitingen zijn gemaakt.

* deze instructies zijn enkel van toepassing voor producten met een voedingskabel of een AC voedingsadapter.

18

VOOR- EN BOVENZIJDE

1. IR ONTVANGSTVENSTER

2. SCHERM

Toont de gebruiksmodus van en informatie over het apparaat

3. KLEPJE VAN DISKHOUDER

4. VOL +/VOL -

Het hoofdvolume aanpassen

5. FOLDER+/10+

CD/USB/SD:

Tijdens het afspelen indrukken om het huidige tracknummer met 10 te verhogen

Ingedrukt houden om de volgende folder te selecteren (folder omhoog)

6. VOORKEUZE/WILLEKEURIG

DAB/FM:

Indrukken om de herroepfunctie te openen voor voorkeuzekanalen

Ingedrukt houden om de opslagfunctie te openen voor voorkeuzekanalen

CD/USB/SD: Tijdens het afspelen indrukken om een willekeurige afspeelvolgorde te starten. Nogmaals indrukken om

de normale afspeelmodus te hervatten

7. SELECTEREN

Indrukken om instellingen te veranderen in het menu

8. MENU

Indrukken om het menu te openen en instellingen te veranderen

19

9. PROGRAMMEER/HERHAAL

CD/USB/SD:

Tijdens het afspelen indrukken om de herhalende afspeelmodus te starten

In stopmodus indrukken om de instellingen te openen voor de geprogrammeerde afspeelmodus

10. INFO

DAB/FM: Indrukken om stationsinformatie weer te geven

CD/USB/SD: Tijdens MP3-weergave indrukken om de folder/het tracknummer of de track/afspeeltijd weer te geven

11. STOP

Indrukken om de CD/USB/SD-afspeelmodus te stoppen

12. /PAREN

CD/USB/SD/BT: Indrukken om het afspelen te pauzeren en hervatten.

BT: Ingedrukt houden om de huidige verbinding te verbreken en te beginnen met zoeken naar een andere nieuw

Bluetooth-apparaat

13. STAND-BY/BRON

Indrukken om het apparaat in te schakelen. Indrukt houden om uit en op stand-by te schakelen

Nadat het apparaat is ingeschakeld, dan kunt u op deze toets drukken om uit verschillende gebruiksmodi te kiezen:

DAB/FM/CD/USB/SD/BT/AUX

14. SCAN

DAB: Indrukken om een automatische scan te starten en alle beschikbare DAB-stations op te slaan.

FM: Indrukken om naar het volgende beschikbare FM-station te zoeken

15. /AFSTEMMEN- en /AFSTEMMEN+

DAB: Indrukken om de volgende stationsinformatie weer te geven

FM:

Kort indrukken om op een andere frequentie af te stemmen

Ingedrukt houden om naar het volgende beschikbare station te zoeken

CD/USB/SD/BT: Tijdens het afspelen indrukken om de vorige of volgende track te selecteren

16. USB- en SD-KAARTINGANG

17. TELESCOPISCHE ANTENNE

Trek deze antenne volledig uit voor een optimale DAB-/FM-ontvangst.

20

ACHTER- EN ONDERZIJDE

1. AUX

Sluit hier een externe audiospeler aan

2. HOOFDTELEFOONUITGANG

Sluit hier een externe hoofdtelefoon aan

3. AC IN ~

Sluit op deze ingang de voedingskabel aan

4. KLEPJE VAN BATTERIJVAK

La page charge ...

Lenco SCD-685 Manuel utilisateur

Ce manuel convient également à

Lenco SCD-685 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents