Phase CS6R DVT Owners Manual/Install Manual

Marque: Phase

Modèle: CS6R DVT

Catégorie: Haut-parleurs

Taper: Owners Manual/Install Manual

[CS PROFESSIONAL SERIES] CS-6R • CS6R DVT • CS-8R

TE CH NO LO GY

OWNER’S MANUAL & INSTALL GUIDE

Thank you for purchasing Phase Technology

CS Professional speakers. These

speakers offer exceptional performance and power handling in ush-mounted

designs. Each model features extra-high sensitivity to assure concert volume

levels, even with low-powered distribution systems.

The CS Series is engineered to handle the dynamic range of multi-channel

audio technologies like Dolby Digital and DTS as well as traditional two-channel

sources. These in-ceiling speakers deliver high-end tonal balance and a clear

distinction between musical notes.

The line comprises two-way models including 6.5” and 8” polypropylene cones

with NBR

™

surrounds for lasting performance, indoors or out, and dual voice

coil, dual tweeter congurations permit one CS Professional series speaker to

deliver stereo sound to any room.

Regardless of application, serious audiophile listening or home theater,

we recommend that you take the time to read this manual thoroughly

before connecting speakers to your amplier or receiver. In the highly

unlikely event that you should experience a problem with set-up or

operation, please contact one of our authorized dealers for assistance,

or contact us directly.

Phase Technology Corporation

8005 W. 110th St., Suite 208

Overland Park, KS 66210

855.663.5600 (Domestic)

+1.913.663.5600 (International)

913.663.3200 (Fax)

SAFETY INSTRUCTIONS 2

INSTALLATION GUIDELINES 3

SPEAKER INSTALLATION 3

CARING FOR YOUR SPEAKER 4

MAINTENANCE AND SERVICE 4

WARRANTY 4

SPECIFICATIONS 4

FLANGE CLAMP SCREWS (4x)

AIMABLE TWEETER

FLANGE

MICRO-FLANGE GRILLE

CS-6R DVT

CS-6R

CS-8R

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and other instructions

should be followed.

5. Water and Moisture - The appliance should not be used near

water - for example, near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a

cart or stand that is recommended by the manufacturer.

PORTABLE CART WARNING

7. Wall or Ceiling Mounting - The appliance should be mounted

to a wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its

location or position does not interfere with its proper ventilation.

For example, the appliance should not be situated on a bed, sofa,

rug, or similar surface that may block the ventilation openings;

or placed in a built-in installation, such as a bookcase or cabinet

[SAFETY INSTRUCTIONS]

that may impede the ow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources

such as radiators, stoves, or other appliances that produce heat.

10. Power Source - The appliance should be connected to

a power supply only of the type described in the operating

instructions or as marked on the appliance.

11. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or pinched by

items placed up or against them, paying particular attention to

cords at plugs, convenience receptacles, and the point where they

exit from the appliance.

12. Cleaning - The appliance should be cleaned only as

recommended by the manufacturer.

13. Nonuse Periods - The power cord of the appliance should

be unplugged from the outlet when left unused for a long period

of time.

14. Object and Liquid Entry - Care should be taken so that

neither objects fall nor liquids spill into the inside of the appliance.

15. Damage Requiring Service - The application should be

serviced by qualied service personnel when:

a. the power supply cord or the plug has been damaged,

b. objects have fallen onto or liquid has been spilled into the

appliance,

c. the appliance has been exposed to rain,

d. the appliance does not appear to operate normally or exhibits a

marked change in performance, or

e. the appliance has been dropped or the cabinet damaged.

16. Servicing - The user should not attempt to service the

appliance beyond those means described in the operating

instructions. All other servicing should be referred to qualied

service personnel.

17. Grounding or Polarization - Precautions should be taken so

that the grounding or polarization means of an appliance is not

defeated.

Explanation of Graphical Symbols

The lightning ash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the presence

of un-insulated “dangerous voltage: within the product’s

enclosure that may be off sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert you to the presence of important operating

and maintenance (servicing) instructions in the literature

accompanying the appliance.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR

USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRESE ET POUSSER JUSQU AU FOND.

CAUTION: To reduce the risk of electric shock, do not remove cover

(or back). No user-serviceable parts inside. Refer servicing to qualied

service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

[INSTALLATION GUIDELINES]

For proper connection and therefore full enjoyment of your new Phase Technology

speakers,

we encourage you to read this owners’ manual thoroughly, even if you are very familiar with

installing speakers. Speaker placement is very subjective. Placement follows the guidelines for

the developers of in-ceiling speakers, yet is also guided by personal preferences. The proper

spacing, location and adjustment of in-ceiling speakers are critical for complete enjoyment

of your new speakers. This manual covers these topics thoroughly. Choose the appropriate

mounting location for each speaker.

NOTE: When deciding upon a location, consider the following:

• Be certain your speaker wires can be run to or are accessible from these locations.

• Make certain the wall or ceiling material is sturdy enough to support the weight and vibration

of the speakers.

• It is recommended that our pre-construction rough-in brackets (part number RB-14 for CS-

6R & CS-6R DVT, AC-CS-8R-PCB for CS-8R) be used whenever possible in new construction.

• Be certain the area behind the speaker is free of obstacles such as wall studs, electrical

wiring, pipes, etc.

• Each speaker should be positioned properly, relative to the listening area for good coverage.

• Audio performance and room-to-room isolation will be improved if there is some berglass

insulation placed loosely behind the speaker.

[SPEAKER INSTALLATION]

STEP 1: Using the supplied cutout template,carefully mark the area to be cut out. Using a

drywall knife or saw, cut a hole in the drywall and prepare the speaker wires for connection

to the speaker terminals. (Fig. 1).

STEP 2: Remove the grille from the speaker assembly (Fig. 2). If it is necessary to paint the

speaker grille to match the ceiling, we recommend that you do so with several light coats of

matching spray paint.

STEP 3: Connect the speaker wires to the input terminals on the rear of the speaker, making

sure no loose strands are exposed (Fig. 3).

STEP 4: NOTE: For the CS-6R DVT there are several hookup options. For stereo point-

source operation, connect the speaker wires to the left AND right channel input terminals on

the rear of the speaker (Fig. 4). Make sure no loose strands are exposed. Please make sure

to check your hookup polarity for proper operation.

For Surround/Mono: The CS-6R DVT may also be used as a surround speaker for home

theater applications. For the SURROUND or MONO mode of operation, connect your speaker

wire to either the left OR right channel input as above (Fig. 5). Next, connect 2 jumper wires

from this same input terminal to the corresponding input terminals on the opposite side of

the speaker. Connect the red positive terminal to opposite red terminal and black negative

terminal to opposite black terminal.

This speaker may be set to either the bipole OR dipole mode of operation using the selector

switch on the rear panel.

Please note that the speaker is a 4 ohm speaker in this conguration.

STEP 5: Carefully position the speaker in the cutout hole. Using a Phillips screwdriver, rotate

the four clamps to secure the speaker to the drywall (Fig. 6). CAUTION: DO NOT OVER-

TIGHTEN.

STEP 6: Carefully replace the grille by pressing it into the gap between the ange and the

bafe. Enjoy!

[FIG. 2]

[FIG. 1]

[FIG. 3]

[FIG. 4]

[FIG. 5]

[FIG. 6]

1u6

100 v 100 v

1u6 1u6

100 v 100 v

1u6

100 v

1u6

100 v

STEREO POINT-SOURCE CONFIGURATION

SURROUND OR MONO CONFIGURATION

“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio

. www.phasetech.com.

[CARING FOR YOUR PHASE TECHNOLOGY SPEAKER]

All Phase Technology

speakers are nished with a high degree of craftsmanship in either hand polished paint or vinyl laminates.

We recommend using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the nish. Avoid

products containing silicones, oils, oil derivatives, or solvents. Use a damp cloth on enclosures nished in vinyl laminates.

[MAINTENANCE AND SERVICE]

Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if

connected and used as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase

Technology

dealer. Your dealer has the necessary factory-authorized parts and trained technicians to quickly restore your speaker

to its original performance specications.

[WARRANTY]

LIMITED WARRANTY: Phase Technology

warrants its loudspeakers to be free from defects in material and workmanship for a

period of ten (10) years for speaker product, limited lifetime for CI speakers, and three (3) years for the electronic components to

the original purchaser. Purchase must be made from an authorized Phase Technology

dealer.

This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations,

unauthorized repairs, failure to follow instructions, re, ood or any other cause beyond the reasonable control of Phase Technology

Defects in speaker cabinets or grilles must be brought to the attention of your dealer immediately after purchase. This warranty will

be void if the products’ serial number has been altered or removed.

Should your Phase Technology

product require service, please call the MSE Audio

customer service department for a return

authorization. All merchandise returned to Phase Technology

without prior authorization will be refused. For your return authorization

number, please call 855.663.5600 or email sales@mseaudio.com.

.75” Pivoting Patented Soft Dome

6.5” Coaxial Polypropylene w/ NBR Surround

5 - 100 Watts

55 Hz - 20 kHz

87 dB

8Ω

9.1”

8.062”

2.875”

2 lbs.

White Powder-Coated Magnetic Micro-Flange

Pre-Construction Bracket (RB-14)

(2) .75” Pivoting Patented Soft Dome

6.5” Coaxial Polypropylene w/ NBR Surround

5 - 100 Watts

55 Hz - 20 kHz

87 dB

8Ω

9.1”

8.0.62”

3”

2.5 lbs.

White Powder-Coated Magnetic Micro-Flange

Pre-Construction Bracket (RB-14)

.75” Pivoting Patented Soft Dome

8” Coaxial Polypropylene w/ NBR Surround

5 - 120 Watts

48 Hz - 20 kHz

87 dB

8Ω

10.625”

9.625”

3.375”

4.75 lbs.

White Powder-Coated Magnetic Micro-Flange

Pre-Construction Bracket (AC-CS-8R-PCB)

CS-6R CS-6R DVT CS-8R

TWEETER

WOOFER

RMS

FREQUENCY

SENSITIVITY

IMPEDANCE

DIAMETER

CUTOUT DIAMETER

MOUNTING DEPTH

WEIGHT

GRILLE

ACCESSORIES*

IMAGES

Phase CS6R DVT Owners Manual/Install Manual

Marque: Phase

Modèle: CS6R DVT

Catégorie: Haut-parleurs

Taper: Owners Manual/Install Manual

Télécharger le PDF

rapport

dans d''autres langues

English: Phase CS6R DVT

Phase CS6R DVT Owners Manual/Install Manual

Phase CS6R DVT Owners Manual/Install Manual

dans d''autres langues

Autres documents