Ubiquiti UAP-XG Manuel utilisateur

UniFi AP XG Mounting Plate Ceiling Backing Plate

Ceiling Screws (Qty. 4) Keps Nuts (Qty. 4) T-Bar Mounts (Qty. 2)

Package Contents

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

T-Bar Screws (Qty. 2) Allen Wrench Wall Screws (Qty. 4)

Screw Anchors (Qty. 4) Cable Feed Plug Gigabit PoE (50V, 1.2A)*

Power Cord*

* Included only with the single-pack of the UAP-XG.

Installation Requirements

Phillips screwdriver

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Drill and drill bit (8 mm for wall mounting or 3 mm for ceiling tile mounting)

Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)

Cat6A UTP cable for indoor installations

Outdoor Installation Requirements

IMPORTANT: The UAP-XG may be installed outdoors under an eave or other

protected location. Do not install the UAP-XG in an open environment.

Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling.

Cable feed opening must be directed away from the open environment.

Cable feed must be pointed downwards when wall-mounted.

Shielded Category 6 (or above) cabling should be used for all outdoor wired Ethernet

connections and should be grounded through the AC ground of the PoE.

System Requirements

Linux, Mac OS X, or Microsoft Windows 7/8/10

Java Runtime Environment 1.8 or above

Web Browser: Google Chrome (Other browsers may have limited functionality.)

UniFi Controller software v5.7 or newer (available at: ui.com/download/unifi)

Hardware Overview

LED

Ports

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Security Slot

Reset

If you need to remove the UniFi AP from the Mounting Plate, insert a flat, thin object

like a zip tie or large paper clip in the Security Slot to release the Lock Tab and turn

the UniFi AP counterclockwise.

The Reset button serves two functions for the UAP-XG:

Restart Press and release the Reset button quickly.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

1 GbE

10 GbE

Restore to Factory Default Settings Press and hold the Reset button for more than

five seconds.

The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used

to connect the power.

The 10 GbE port is a 1/10 Gbps Ethernet port used to connect the power and should

be connected to the LAN and DHCP server. For 10 Gbps operation, connect the

UAP-XG to an 802.3bt PoE switch.

Note: The UAP-XG can also be powered using a 50V, 1.2A Gigabit PoE

adapter. For instructions on using the adapter, see Powering the UniFi AP.

Mounting Plate

The Mounting Plate offers a variety of mounting holes for different applications. The

legend printed on the Mounting Plate identifies the holes used for each application.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Hardware Installation

The UAP-XG can be mounted on a wall, ceiling tile, drop ceiling T-rail (up to 40 mm), or

electrical junction box. Perform the steps for the appropriate installation.

Note for UniFi AP replacement: The holes marked “A” on the Mounting Plate

line up with the holes of mounting brackets used for previous UniFi AP models.

Wall Mount

1.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Optional

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

6.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

7.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

8.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

9.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Optional

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

10.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Ceiling Mount

1.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

La page est en cours de chargement...

Ubiquiti UAP-XG Manuel utilisateur

Ce manuel convient également à

Ubiquiti UAP-XG Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents